Tensile Strength of Stitching Joint in Woven Glass Fabrics

1990 ◽  
Vol 112 (2) ◽  
pp. 125-130 ◽  
Author(s):  
Chienhom Lee ◽  
Dahsin Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Tensile Strength ◽  
Composite Laminates ◽  
Composite Beams ◽  
Woven Fabrics ◽  
The Other ◽  
Uniform Thickness ◽  
Overlap Joint ◽  
Joining Strength

Stitching has been found to be able to improve the interlaminar strength of composite laminates. Its application as composite joining has been also explored. This study examined the tensile strength of some stitched composite beams made of woven glass fabric and epoxy matrix. The effects of stitching parameters on joining strength were evaluated by both experimental technique and finite element method. It was found that there were two basic ways to improve the strength of stitching joint. One was to use high-density stitching in nonoverlap joint and the other was to use chain stitching in overlap joint. However, the former could give smoother surface and more uniform thickness than the latter. In addition, it was concluded from this study that stitching joint was more suitable for woven fabrics than for unidirectional prepreg tapes.

Prediction of Permeability Tensor for Plain Woven Fabric by Using Control Volume Finite Element Method

2003 ◽  
Vol 11 (6) ◽  
pp. 465-476 ◽  
Author(s):  
Y. S. Song ◽  
K. Chung ◽  
T. J. Kang ◽  
J. R. Youn
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Control Volume ◽  
Three Dimensional ◽  
Woven Fabrics ◽  
Permeability Tensor ◽  
Woven Fabric ◽  
Stacking Order ◽  
Control Volume Finite Element ◽  
Element Method

The complete prediction of the second order permeability tensor for a three dimensional multi-axial preform is critical if we are to model and design the manufacturing process for composites by considering resin flow through a multi-axial fiber structure. In this study, the in-plane and transverse permeabilities for a woven fabric were predicted numerically by the coupled flow model, which combines microscopic and macroscopic flows. The microscopic and macroscopic flows were calculated by using 3-D CVFEM(control volume finite element method) for micro and macro unit cells. To avoid a checkerboard pressure field and improve the efficiency of numerical computation, a new interpolation function for velocity is proposed on the basis of analytical solutions. The permeability of a plain woven fabric was measured by means of an unidirectional flow experiment and compared with the permeability calculated numerically. Reverse and simple stacking of plain woven fabrics were taken into account and the relationship between the permeability and the structures of the preform such as the fiber volume fraction and stacking order is identified. Unlike other studies, the current study was based on a more realistic three dimensional unit cell. It was observed that in-plane flow is more dominant than transverse flow within the woven perform, and the effect of the stacking order of a multi-layered preform was negligible.

Diagram Design of Weaving Process for Touch-Feel Estimation of Plain-Woven Fabrics by Finite Element Method

2020 ◽  
Author(s):  
Hikaru Miyaki ◽  
Atsushi Sakuma
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Initial Stress ◽  
Woven Fabrics ◽  
Unit Cell ◽  
Open Set ◽  
Digital Evaluation ◽  
Adopted Model ◽  
Woven Structure ◽  
Element Method

Abstract Digital evaluation of touch-feel in textiles is useful to design fundamental functions of clothing. Here, it is necessary to design textiles for a detailed evaluation of the sensitivity in human’s feelings to consider the life-style creation in various aspects. Then, the objective of this paper is to propose a design method for plain-woven fabrics by touch-feel estimation considering the weaving process with the constitutive relations of yarn. Here, a diagram for control weaving is defined by the diameter of the yarn and displacement quantity of the weaving and the cramping by defining the theoretical thickness. For the effective design to consider various processes, unit-cell of plain-woven structures are fundamentally classified as open set models and closed set models. One of the unit-cell models in the finite element method (FEM) for the plain-woven structure is adopted because the adopted model can consider initial-stress distribution in the weaving process. For touch-feel estimation, an analysis model is constructed by warp, weft, and plungers that cramps the woven structure. A series of diagrams to compress with plungers is shown after constructing a plain-woven structure. As for analyzing the weaving process and the touch-feel estimation in one model, realization of the effective engineering is enabled. This procedure yields that the relationship between the displacement and simulation time suggests for consideration of initial-stress.

A Numerical Approach for Simulation of Rock Fracturing in Engineering Blasting

2012 ◽  
pp. 203-224
Author(s):  
Mani Ram Saharan ◽  
Hani Mitri
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Modelling ◽  
Knowledge Base ◽  
Plane Stress ◽  
Numerical Approach ◽  
The Other ◽  
Brittle Rock ◽  
Rock Fracturing ◽  
Element Elimination

An approach for simulation of rock fracturing as a result of engineering blasting is presented in this paper. The approach uses element elimination technique within the framework of finite element method to capture the physics of engineering blasting. The approach does not require pre-placement of fracture paths which is the severe drawback of the other existing methodologies and approaches. Results of plane stress modelling for isotropic brittle rock behaviour are presented in this paper and these results are in good agreement with the existing knowledge base. The authors also review the existing approaches of numerical modelling to compare the efficacy of the element elimination technique. It is anticipated that the further developments with this approach can prove to be good experimental tool to improve engineering blasting operations.

scholarly journals Influence of the Mechanical Properties of Elastoplastic Materials on the Nanoindentation Loading Response

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4842
Author(s):  
Huanping Yang ◽  
Wei Zhuang ◽  
Wenbin Yan ◽  
Yaomian Wang
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
The Other ◽  
Equivalent Model ◽  
Strain Hardening Exponent ◽  
Mechanical Parameters ◽  
The Finite Element Method ◽  
Fem Simulations ◽  
Elastoplastic Materials

The nanoindentation loading response of elastoplastic materials was simulated by the finite element method (FEM). The influence of the Young’s modulus E, yield stress σy, strain hardening exponent n and Poisson’s ratio ν on the loading response was investigated. Based on an equivalent model, an equation with physical meaning was proposed to quantitatively describe the influence. The calculations agree well with the FEM simulations and experimental results in literature. Comparisons with the predictions using equations in the literature also show the reliability of the proposed equation. The investigations show that the loading curvature C increases with increasing E, σy, n and ν. The increase rates of C with E, σy, n and ν are different for their different influences on the flow stress after yielding. It is also found that the influence of one of the four mechanical parameters on C can be affected by the other mechanical parameters.

scholarly journals Simulation-based Prediction of Structural Design Failure in Fishing Deck Machinery a Hydraulic Type with Finite Element Method

2019 ◽  
Vol 130 ◽  
pp. 01001
Author(s):  
Agri Suwandi ◽  
Dede Lia Zariatin ◽  
Bambang Sulaksono ◽  
Estu Prayogi ◽  
I Made Widana
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Structural Design ◽  
Simulation Analysis ◽  
Poisson Ratio ◽  
Von Mises Stress ◽  
Material Base ◽  
Element Method

The fishing deck machinery is the tools used to collect fish in fishing activities. Fishing deck machinery is intended to improve the effectiveness of fishing operations. The mission of the Ministry of Marine Affairs and Fishery Year 2015-2019 in the Regulation of the Minister of Marine and Fisheries No. 45/PERMEN-KP/2015 which is a priority is to provide assistance for fishing facilities for fishermen; it is necessary to develop and optimize fishing deck machinery. To assure the safety and dependability of these fishing deck machinery, calculations, simulation and functional tests are needed. This paper discusses the prediction of structural failure in the design of fishing deck machinery a hydraulic type with finite element method simulation approach. The results of the FEM simulation analysis are (i) the maximum value of von-Mises stress is greater than the ultimate tensile strength of the material; (ii) 1st principal stress value minimum is smaller than the ultimate tensile strength of material; (iii). the Poisson ratio value higher than the Poisson ratio value of the material. Base on the simulation result, the structural design of fishing deck machinery is safety.

Dynamic tensile process of blended fabric using finite element method

2020 ◽  
Vol 32 (5) ◽  
pp. 707-724
Author(s):  
Xuzhong Su ◽  
Xinjin Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Experimental Testing ◽  
Woven Fabrics ◽  
Weft Yarn ◽  
Tensile Fracture ◽  
Content Type ◽  
Tensile Process ◽  
Simulation Results ◽  
Element Method

PurposeTensile property is one basic mechanics performance of the fabric. In general, not only the tensile values of the fabric are needed, but also the dynamic changing process under the tension is also needed. However, the dynamic tensile process cannot be included in the common testing methods by using the instruments after fabric weaving.Design/methodology/approachBy choosing the weft yarn and warp yarn in the fabric as the minimum modeling unit, 1:1 finite element model of the whole woven fabrics was built by using AutoCAD software according to the measured geometric parameters of the fabrics and mechanical parameters of yarns. Then, the fabric dynamic tensile process was simulated by using the ANSYS software. The stress–strain curve along the warp direction and shrinkage rate curve along the weft direction of the fabrics were simulated. Meanwhile, simulation results were verified by comparing to the testing results.FindingsIt is shown that there are four stages during the fabric tensile fracture process along the warp direction under the tension. The first stage is fabric elastic deformation. The second stage is fabric yield deformation, and the change rate of stress begins to slow down. The third stage is fiber breaking, and the change of stress fluctuates since the breaking time of the fibers is different. The fourth stage is fabric breaking.Originality/valueIn this paper, the dynamic tensile process of blended woven fabrics was studied by using finite element method. Although there are differences between the simulation results and experimental testing results, the overall tendency of simulation results is the same as the experimental testing results.

Sign in / Sign up

Export Citation Format

Share Document