Kinematic Analysis of Spatial Mechanisms Via Successive Screw Displacements

1975 ◽  
Vol 97 (2) ◽  
pp. 739-747 ◽  
Author(s):  
Dilip Kohli ◽  
A. H. Soni
Keyword(s):  
Closed Form ◽  
Kinematic Analysis ◽  
Closed Loop ◽  
Displacement Velocity ◽  
Spatial Mechanism ◽  
Spatial Mechanisms ◽  
Straight Line ◽  
Unified Method

A new, unified method is proposed and demonstrated to conduct kinematic analysis of spatial mechanisms involving revolute, cylindrical, prismatic, helical and spherical pairs. The paper derives the equations for the successive screw displacements, and the equations for pair constraints. Using these equations, closed-form relationships for displacement, velocity and acceleration of single or multi-loop spatial mechanisms are obtained by (1) breaking the mechanism at a critical joint (2) unfolding the mechanism along a straight line (3) providing successive screw displacement at each joint and (4) reassembling the mechanism to form a closed loop. The application of this newly developed approach is demonstrated by considering an example of a two-loop spatial mechanism with revolute, cylindrical and spherical pairs.

Kinematic Analysis of Spatial Mechanisms by Means of Screw Coordinates. Part 2—Analysis of Spatial Mechanisms

1971 ◽  
Vol 93 (1) ◽  
pp. 67-73 ◽  
Author(s):  
M. S. C. Yuan ◽  
F. Freudenstein ◽  
L. S. Woo
Keyword(s):  
Computer Program ◽  
Kinematic Analysis ◽  
Static Force ◽  
Single Degree Of Freedom ◽  
Numerical Examples ◽  
Spatial Mechanism ◽  
Single Degree ◽  
Spatial Mechanisms ◽  
Torque Analysis ◽  
Basic Concepts

The basic concepts of screw coordinates described in Part I are applied to the numerical kinematic analysis of spatial mechanisms. The techniques are illustrated with reference to the displacement, velocity, and static-force-and-torque analysis of a general, single-degree-of-freedom spatial mechanism: a seven-link mechanism with screw pairs (H)7. By specialization the associated computer program is capable of analyzing many other single-loop spatial mechanisms. Numerical examples illustrate the results.

Reverse Kinematic Analysis of the Spatial Six Axis Robotic Manipulator With Consecutive Joint Axes Parallel

2007 ◽  
Author(s):  
Javier Rolda´n Mckinley ◽  
Carl Crane ◽  
David B. Dooner
Keyword(s):  
Kinematic Analysis ◽  
Closed Loop ◽  
Degree Of Freedom ◽  
Repetitive Motion ◽  
Spatial Mechanism ◽  
Joint Axis ◽  
Specific Geometry ◽  
Noncircular Gears ◽  
Six Degree Of Freedom ◽  
The Given

This paper introduces a reconfigurable one degree-of-freedom spatial mechanism that can be applied to repetitive motion tasks. The concept is to incorporate five pairs of noncircular gears into a six degree-of-freedom closed-loop spatial chain. The gear pairs are designed based on the given mechanism parameters and the user defined motion specification of a coupler link of the mechanism. It is shown in the paper that planar gear pairs can be used if the spatial closed-loop chain is comprised of six pairs of parallel joint axes, i.e. the first joint axis is parallel to the second, the third is parallel to the fourth, …, and the eleventh is parallel to the twelfth. This paper presents the detailed reverse kinematic analysis of this specific geometry. A numerical example is presented.

A Rolling 8-Bar Linkage Mechanism

2015 ◽  
Vol 7 (4) ◽  
Author(s):  
Yaobin Tian ◽  
Yan-An Yao ◽  
Jieyu Wang
Keyword(s):  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Closed Loop ◽  
Rolling Direction ◽  
Linkage Mechanism ◽  
Zero Moment Point ◽  
Revolute Joints ◽  
Straight Line ◽  
Polygonal Region ◽  
Zero Moment

In this paper, a rolling mechanism constructed by a spatial 8-bar linkage is proposed. The eight links are connected with eight revolute joints, forming a single closed-loop with two degrees of freedom (DOF). By kinematic analysis, the mechanism can be deformed into planar parallelogram or spherical 4-bar mechanism (SFM) configuration. Furthermore, this mechanism can be folded onto a plane at its singularity positions. The rolling capability is analyzed based on the zero-moment-point (ZMP) theory. In the first configuration, the mechanism can roll along a straight line. In the second configuration, it can roll along a polygonal region and change its rolling direction. By alternatively choosing one of the two configurations, the mechanism has the capability to roll along any direction on the ground. Finally, a prototype was manufactured and some experiments were carried out to verify the functions of the mechanism.

Approximated Grashof-Type Movability Conditions for RSSR Mechanisms With Force Transmission Limitations

1992 ◽  
Vol 114 (1) ◽  
pp. 74-81 ◽  
Author(s):  
J. Rastegar ◽  
Q. Tu
Keyword(s):  
Closed Form ◽  
Closed Loop ◽  
Open Loop ◽  
Approximation Technique ◽  
Force Transmission ◽  
Output Link ◽  
Link Type ◽  
Spatial Mechanisms ◽  
Loop Chain ◽  
Drag Link

Closed-form Grashof-type movability conditions are derived for closed-loop RSSR mechanisms using a geometrical approximation technique. The conditions that ensure the presence of crank-rocker and drag-link type mechanisms are derived with and without force transmission limitations. The force transmission limitations may be specified as a function of the output link angle. The accuracy of the approximated conditions is analyzed. As an example, the conditions are used to synthesize a function generating mechanism with fully rotatable crank and with various force transmission requirements. The developed technique is general, and can be applied to other similar spatial mechanisms. The application of this approach to geometrical synthesis of open-loop chain manipulators is discussed.

A Dynamic Analysis of a Spatial Mechanism With a Passive Degree of Freedom

1989 ◽  
Vol 111 (2) ◽  
pp. 238-242 ◽  
Author(s):  
C. H. Suh ◽  
H. Y. Kang
Keyword(s):  
Dynamic Analysis ◽  
Equations Of Motion ◽  
Degree Of Freedom ◽  
Displacement Velocity ◽  
Spatial Mechanism ◽  
Spatial Mechanisms ◽  
Euler’S Equations ◽  
Kinematic Method ◽  
Euler's Equations

A method is developed for kinematic and dynamic analysis of a spatial mechanisms that has one or more links with a passive degree of freedom. The Sphere-Sphere (SS) link, the most commonly known link having a passive degree of freedom, is investigated to develop in detail displacement, velocity, and acceleration matrices for complete kinematics. The dynamic analysis of the RSSR mechanism is presented as an example, using the developed kinematic method for SS links and Euler’s equations of motion.

Parameterization of Three-Dimensional Rigid Body Guidance Incorporating Planar Gear Connections in a Spatial Closed-Loop Mechanism With Parallel Consecutive Axes

2008 ◽  
Author(s):  
Javier Rolda´n Mckinley ◽  
Carl Crane ◽  
David B. Dooner
Keyword(s):  
Computer Animation ◽  
Closed Loop ◽  
Three Dimensional ◽  
Motion Generation ◽  
Repetitive Motion ◽  
End Effector ◽  
Spatial Mechanism ◽  
Joint Axis ◽  
Position And Orientation ◽  
Six Degree Of Freedom

This paper introduces a reconfigurable closed-loop spatial mechanism that can be applied to repetitive motion tasks. The concept is to incorporate five pairs of non-circular gears into a six degree-of–freedom closed-loop spatial chain. The gear pairs are designed based on given mechanism parameters and a user defined motion specification of a coupler link of the mechanism. It is shown in the paper that planar gear pairs can be used if the spatial closed-loop chain is comprised of six pairs of parallel joint axes, i.e. the first joint axis is parallel to the second, the third is parallel to the fourth, ..., and the eleventh is parallel to the twelfth. This paper presents the synthesis of the gear pairs that satisfy a specified three-dimensional position and orientation need. Numerical approximations were used in the synthesis the non-circular gear pairs by introducing an auxiliary monotonic parameter associated to each end-effector position to parameterize the motion needs. The findings are supported by a computer animation. No previous known literature incorporates planar non-circular gears to fulfill spatial motion generation needs.

On the shaft locations of two contra-rotating counterweights for balancing spatial mechanisms

1997 ◽  
Vol 211 (8) ◽  
pp. 567-578 ◽  
Author(s):  
S-T Chiou ◽  
J-C Tzou
Keyword(s):  
Root Mean Square ◽  
Mean Square ◽  
Spatial Mechanism ◽  
Spatial Mechanisms ◽  
Crank Mechanism ◽  
Frequency Term ◽  
Shaking Moment

It has been shown in a previous work that a frequency term of the shaking force of spatial mechanisms, whose hodograph is proved to be an ellipse, can be eliminated by a pair of contrarotating counterweights. In this work, it is found that the relevant frequency term of the shaking moment is minimized if the balancing shafts are coaxial at the centre of a family of ellipsoids, called isomomental ellipsoids, with respect to (w.r.t.) any point on an ellipsoid, as is also the root mean square (r.m.s.) of the relevant frequency term of the shaking moment. It can also be minimized even though the location of either shaft, but not both, is chosen arbitrarily on a plane. The location of the second shaft is then determinate. In order to locate the centre, a derivation for the theory of isomomental ellipsoids of a frequency term of the shaking moment of spatial mechanisms is given. It is shown that the r.m.s. of a frequency term shaking moment of a spatial mechanism w.r.t. the concentric centre of the isomomental ellipsoids is the minimum. Examples of a seven-link 7-R spatial linkage and a spatial slider-crank mechanism are included.

Kinematic design and motion analysis of spatial rapier drive mechanisms used in weaving machines

2014 ◽  
Vol 84 (19) ◽  
pp. 2065-2073 ◽  
Author(s):  
Recep Eren ◽  
Mesrur Erturk ◽  
Barıs Hascelik
Keyword(s):  
Motion Analysis ◽  
Kinematic Analysis ◽  
Gear Ratio ◽  
Main Shaft ◽  
Drive Mechanism ◽  
Spatial Mechanism ◽  
Kinematic Design ◽  
Shaft Angle

This paper presents an approach for the kinematic design of a rapier drive mechanism containing a spatial mechanism and analyses rapier motion curve. Kinematic design and analysis equations are derived and then the link lengths of the spatial mechanism are calculated in order to satisfy the critical rapier positions inside and outside the shed. In this way, the portions of one loom revolution, during which the rapiers are inside and outside the shed, are determined. The rapier motion curve is obtained by using kinematic analysis equations. It is shown that the position of the oscillating link in the spatial mechanism and the loom main shaft angle at which the rapier enters the shed have the most significant effect on the rapier motion curve. The gear ratio has also some effect on the rapier motion curve. Different rapier motion curves are obtained by changing these parameters and the suitability of these curves for rapier motion is discussed.

Closed-Form Displacement Relations of a Five-Link R-R-C-C-R Spatial Mechanism

1971 ◽  
Vol 93 (1) ◽  
pp. 221-226 ◽  
Author(s):  
A. H. Soni ◽  
P. R. Pamidi
Keyword(s):  
Closed Form ◽  
Polynomial Equation ◽  
Input Output ◽  
Degree Polynomial ◽  
Spatial Mechanism ◽  
Dual Number ◽  
Numerical Example

Using (3 × 3) matrices with dual-number elements, closed form displacement relationships are derived for a spatial five-link R-R-C-C-R mechanism. The input-output closed form displacement relationship is an eighth degree polynomial equation. A numerical example is presented.

scholarly journals Simple and Exact Closed-Form Expression for Determination of a Penetrated Ray Path in a Ray Tracing

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Hyun Wook Moon ◽  
Woojoong Kim ◽  
Sewoong Kwon ◽  
Jaeheung Kim ◽  
Young Joong Yoon
Keyword(s):  
Closed Form ◽  
Approximate Method ◽  
Ray Tracing ◽  
Conventional Method ◽  
Closed Form Expression ◽  
Indoor Environments ◽  
Straight Line ◽  
Ray Path ◽  
Ray Tracing Simulation

A simple and exact closed-form equation to determine a penetrated ray path in a ray tracing is proposed for an accurate channel prediction in indoor environments. Whereas the penetrated ray path in a conventional ray tracing is treated as a straight line without refraction, the proposed method is able to consider refraction through the wall in the penetrated ray path. Hence, it improves the accuracy in ray tracing simulation. To verify the validation of the proposed method, the simulated results of conventional method, approximate method, and proposed method are compared with the measured results. The comparison shows that the proposed method is in better agreement with the measured results than the conventional method and approximate method, especially in high frequency bands.

Sign in / Sign up

Export Citation Format

Share Document