The Split Compressor Differential Gas Turbine Engine for Vehicle Propulsion

1967 ◽  
Vol 89 (1) ◽  
pp. 49-59 ◽  
Author(s):  
G. N. Doyle ◽  
T. S. Wilkinson
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
Gas Turbine Engine ◽  
Engine Fuel ◽  
Variable Geometry ◽  
Turbine Engine ◽  
Part Load ◽  
Vehicle Propulsion ◽  
Power Turbine

The performance of the vehicular split compressor differential gas turbine (SCDGT) engine is compared to that of the variable geometry free power turbine (FPT) engine. Fuel consumption, engine braking, acceleration, and starting are considered, and it is concluded that the SCDGT has several important advantages. The SCDGT engine needs no speed-changing gearbox for forward drive, its part-load fuel consumption is at least as good as that of the FPT engine, and its acceleration and ease of starting are better.

The Choice Gas Turbine Engine Parameters Used to Drive the Oil Pump

2017 ◽  
pp. 29-43
Author(s):  
A. Yu. Brycheva ◽  
V. D. Molyakov
Keyword(s):  
Crude Oil ◽  
Gas Turbine ◽  
Fuel Consumption ◽  
Centrifugal Pump ◽  
Gas Turbine Engine ◽  
Airflow Rate ◽  
Turbine Engine ◽  
Oil Pump ◽  
Power Turbine ◽  
Engine Cycle

The article considers capabilities of the gas turbine engine to be used as a drive of the crude oil pump. It is noted that the gas turbine drive proves to be more advantageous than the electric motor when there is no external power supply or building periods of power transmission lines are significantly long, as well as quantities of oil products pumped are often changed.The main objective of this work is to select the optimum engine cycle parameters for a particular pump model, which oil pumping stations use. As an object of research, a crude oil pump of the НМ 10000 / 1.25-210 brand was chosen. The paper presents technical characteristics of the HM 10000 / 1.25-210 centrifugal pump and experimental values of head, power, and efficiency of the pump for a number of feeds. To obtain the pressure and power characteristics of a centrifugal pump for different rotational speeds of the rotor the similarity formulas are used.As the centrifugal pump drive, the paper considers a two-shaft plant with the free power turbine. This scheme was chosen in accordance with the features of the gas turbine pump unit at the oil pumping station. It is noted that the free power turbine scheme allows us to bring into accordance the characteristics of a gas turbine engine and an oil pump in abnormal modes, since there is no mechanical connection between high and low pressure turbines.The paper presents the calculated parameters of the gas turbine engine cycle with power Ne = 8 MW. The graphs show dependence of the airflow rate GB, the specific fuel consumption Ce and the efficiency ηe on the degree of pressure increase πk in the compressor. In accordance with the graphs, the optimum value of the degree of pressure increase πk = 15 in the compressor  is adopted. With πk = 15, the specific fuel consumption in the gas turbine engine with power Ne = 8 MW is equal to Ce = 0,22 kg/kW*h and the airflow rate is GB = 20,5kg/s. The efficiency of the engine with the selected parameters is ηe = 38,4%.It is noted that in order to ensure the most economical gas turbine engine operation, it is necessary to select the optimal control program, which is determined taking into account the load characteristics, in this case the characteristics of the pump.

LV100 AIPS Technology—For Future Army Propulsion

1992 ◽  
Author(s):  
Walter Brockett ◽  
Angelo Koschier
Keyword(s):  
Control Systems ◽  
Gas Turbine ◽  
Fuel Consumption ◽  
Cooling System ◽  
Gas Turbine Engine ◽  
Air Filtration ◽  
Turbine Engine ◽  
Overall Design ◽  
Armored Vehicle ◽  
And Control

The overall design of and Advanced Integrated Propulsion System (AIPS), powered by an LV100 gas turbine engine, is presented along with major test accomplishments. AIPS was a demonstrator program that included design, fabrication, and test of an advanced rear drive powerpack for application in a future heavy armored vehicle (54.4 tonnes gross weight). The AIPS design achieved significant improvements in volume, performance, fuel consumption, reliability/durability, weight and signature reduction. Major components of AIPS included the recuperated LV100 turbine engine, a hydrokinetic transmission, final drives, self-cleaning air filtration (SCAF), cooling system, signature reduction systems, electrical and hydraulic components, and control systems with diagnostics/prognostics and maintainability features.

Analytical efficiency comparison between gas turbine and gas turbine hybrid engines for passenger cars

1997 ◽  
Vol 211 (2) ◽  
pp. 113-119 ◽  
Author(s):  
W Cheng ◽  
D. G. Wilson ◽  
A. C. Pfahnl
Keyword(s):  
Gas Turbine ◽  
Gas Turbine Engine ◽  
Passenger Cars ◽  
Long Distance ◽  
Vehicle Performance ◽  
Turbine Engine ◽  
Compression Ignition Engines ◽  
Power Turbine ◽  
Performance And Emissions ◽  
Efficiency Comparison

The performance and emissions of two alternative types of gas turbine engine for a chosen family vehicle are compared. One engine is a regenerative 71 kW gas turbine; the other is a hybrid power plant composed of a 15 kW gas turbine and a 7 MJ flywheel. These engines would give generally similar vehicle performance to that produced by 71 kW spark ignition and compression ignition engines. (The turbine engines would be lighter and, with a free power turbine, would have a more favourable torque-speed curve (1), giving them some advantages.) Results predict that for long-distance trips the hybrid engine would have a considerably better fuel economy and would produce lower emissions than the piston engines, and that the ‘straight’ gas turbine would be even better. For shorter commuting trips the hybrid would be able to run entirely from energy acquired and stored from house electricity, and it could therefore be the preferred choice for automobiles used primarily for urban driving when environmental factors are taken into account. However, the degradation of remaining energy in flywheel batteries and thermal energy in the regenerator and other engine hot parts between use periods will result in more energy being used than for the straight gas turbine engine using normal liquid fuel. The higher initial cost and greater complexity of the hybrid engine will be additional disadvantages.

Application of a Miniature Telemetry System in a Small Gas Turbine Engine

2011 ◽  
Author(s):  
Stephen A. Long ◽  
Patrick A. Reiger ◽  
Michael W. Elliott ◽  
Stephen L. Edney ◽  
Frank Knabe ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Cooling System ◽  
Turbine Rotor ◽  
Gas Turbine Engine ◽  
Telemetry System ◽  
Strain Gages ◽  
Turbine Engine ◽  
Power Turbine ◽  
Successful Execution ◽  
Integration Effort

For the purpose of assessing combustion effects in a small gas turbine engine, there was a requirement to evaluate the rotating temperature and dynamic characteristics of the power turbine rotor module. This assessment required measurements be taken within the engine, during operation up to maximum power, using rotor mounted thermocouples and strain gages. The acquisition of this data necessitated the use of a telemetry system that could be integrated into the existing engine architecture without affecting performance. Due to space constraints, housing of the telemetry module was limited to placement in a hot section. In order to tolerate the high temperature environment, a cooling system was developed as part of the integration effort to maintain telemetry module temperatures within the limit allowed by the electronics. Finite element thermal analysis was used to guide the design of the cooling system. This was to ensure that sufficient airflow was introduced and appropriately distributed to cool the telemetry cavity, and hence electronics, without affecting the performance of the engine. Presented herein is a discussion of the telemetry system, instrumentation design philosophy, cooling system design and verification, and sample of the results acquired through successful execution of the full engine test program.

Off-Design Characteristics of Low-Fuel Consumption Gas Turbine Engine for Long-Range UAV

2013 ◽  
Author(s):  
Roberto Andriani ◽  
Umberto Ghezzi ◽  
Antonella Ingenito ◽  
Fausto Gamma ◽  
Antonio Agresta
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
Long Range ◽  
Gas Turbine Engine ◽  
Turbine Engine ◽  
Design Characteristics

Performance and Emission Characteristics of a Small Scale Gas Turbine Engine Fueled With Propanol/Jet A Blends

2011 ◽  
Author(s):  
Carlos J. Mendez ◽  
Ramkumar N. Parthasarathy ◽  
Subramanyam R. Gollahalli
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
Gas Turbine Engine ◽  
Single Stage ◽  
Specific Fuel Consumption ◽  
Small Scale ◽  
Emission Characteristics ◽  
Turbine Engine ◽  
Performance And Emission ◽  
Emission Index

Alcohols serve as an alternate energy resource to the conventional petroleum-based fuels. The objective of this study was to document the performance and emission characteristics of blends of n-propanol and Jet A fuel in a small-scale gas turbine engine. The experiments were conducted in a 30kW gas turbine engine with a single-stage centrifugal flow compressor, annular combustion chamber and a single-stage axial flow turbine. In addition to neat propanol and Jet A fuel, three blends, with 25%, 50% and 75% of propanol by volume, were used as the fuels. The thrust, thrust-specific fuel consumption, and the concentrations of CO and NOx in the exhaust were measured and compared with those measured with Jet A fuel. The engine was operated at the same throttle settings with all the fuels. The operational range of engine rotational speed was shifted downwards with the addition of propanol due to its lower heating value. The thrust specific fuel consumption increased with the addition of propanol, while the CO emission index increased and NOx emission index decreased.

Sign in / Sign up

Export Citation Format

Share Document