A Note on the Paper “Analysis, Results, and Interpretation for Radiation Between Some Simply Arranged Gray Surfaces”

1963 ◽  
Vol 85 (2) ◽  
pp. 183-184 ◽  
Author(s):  
Frederick A. Costello
Keyword(s):  
Paper Analysis

scholarly journals Content Validity of Written Examinations in Undergraduate Anatomy

1970 ◽  
Vol 7 (1) ◽  
pp. 14-18
Author(s):  
Rubina Sultana ◽  
Khondker Manzare Shamim ◽  
Lutfun Nahar ◽  
Ferdous Hasan
Keyword(s):  
Content Validity ◽  
Paper Analysis ◽  
Assessment System ◽  
Clinical Anatomy ◽  
Developmental Anatomy ◽  
Written Examination ◽  
Study Results ◽  
Medical University ◽  
Short Answer Questions ◽  
Proper Weight

Objective: In ‘Curriculum' 2002 short answer questions are newly introduced. The content of 1st professional written examination was given but the weightage of different subdivision of Anatomy is not mentioned. So, present study was done to see the content validity of different subdivisions of Anatomy in written examinations. Study design: Descriptive type of study Place and period of study: The study was carried out from January 2003 to July 2004 in the Department of Anatomy, Bangabandhu Skeikh Mujib Medical University, Dhaka. Methods: It was based on a quantitative method; the question paper analysis based study. Results: It is evident from the questions paper analysis that different subdivisions of Anatomy are usually not given proper weight in the Anatomy written examinations. There are some subdivisions of Anatomy which are usually covered less than required. These include Genetics, Histology, General Anatomy, General Developmental Anatomy, Clinical Anatomy, etc. Conclusion: for further improvement of assessment system of Anatomy, content validity is needed to be established. Key words: Content validity, Anatomy, undergraduate, written examinations   doi: 10.3329/bja.v7i1.3011 Bangladesh Journal of Anatomy January 2009, Vol. 7 No. 1 pp. 14-18

Mechanism Analysis of Anchor Bolt and Cable Synergistic Action in Coal Roadway Support

2014 ◽  
Vol 716-717 ◽  
pp. 735-738 ◽  
Author(s):  
Peng Cheng ◽  
Jian Zhang ◽  
Ai Qing Liu
Keyword(s):  
Simulation Method ◽  
Paper Analysis ◽  
Synergistic Action ◽  
Mechanism Analysis ◽  
Anchor Bolt ◽  
Tension Distribution ◽  
Coal Roadway ◽  
Cable Force ◽  
Roadway Support ◽  
The Stability

Aiming at the current situation of anchor bolt and cable arrangement in mine roadway support, the paper analysis the mechanical characteristics and mechanism of bolts and cables, and numerical simulation method is used to comparison and analysis of pre-tension distribution characteristics under different anchor bolt-cable arrangement. The research indicated that separate anchor bolt-cable layout in different sections, anchor bolt and cable force stable equilibrium, coordinate with each other, at this time roadway surrounding rock of shallow and deep pretension distribution more reasonable, can play a role of bolt anchor cable synergistic action, and form the best pre-tension load-bearing structure, which is helpful to keep the stability of coal roadway.

Reserch of Dislocation Theory in Micro Cutting

2012 ◽  
Vol 482-484 ◽  
pp. 2033-2036
Author(s):  
Hong Jun Ding ◽  
Xi Bin Wang ◽  
Zhi Qiang Liang ◽  
Qiang Jia
Keyword(s):  
Fracture Strength ◽  
Paper Analysis ◽  
Fracture Dislocation ◽  
Dislocation Theory ◽  
Line Defect ◽  
Dislocation Mechanism ◽  
Micro Cutting ◽  
Metal Fracture ◽  
Depth Analysis

This paper analysis Griffith 's Theory and the metal theoretical fracture strength, thus introducing a line defect that existence in actual crystal — dislocation; And in-depth analysis the metal fracture dislocation mechanism in the micro cutting, and the formation and expand of the Fracture cracks , provides the theory basis for micro cutting

The Pose of Data Model and Research Based on Analysis of Intelligent Test Paper

2013 ◽  
Vol 303-306 ◽  
pp. 2203-2206
Author(s):  
Cai Li Fang ◽  
Lin Wu
Keyword(s):  
Data Model ◽  
Paper Analysis ◽  
Calculation Model ◽  
Test Paper ◽  
Fast Reaction ◽  
Analysis Algorithm ◽  
The Future ◽  
Education Measurement ◽  
Calculation Models

As a important part of teaching, Traditional paper analysis algorithm is complicated and not comprehensive enough. This paper according to the indicators of education measurement and improves the traditional calculation models, the system assesses the perfect calculation model, The teacher also can get the true and fast reaction to students' knowledge and the quality of the paper. This method thereby provides a convincing basis for the improvement on the future teaching and increase the effectiveness in teaching

scholarly journals [Paper] Analysis and Reduction Technologies of Floating Diffusion Capacitance in CMOS Image Sensor for Photon-Countable Sensitivity

2016 ◽  
Vol 4 (2) ◽  
pp. 91-98
Author(s):  
Fumiaki Kusuhara ◽  
Shunichi Wakashima ◽  
Satoshi Nasuno ◽  
Rihito Kuroda ◽  
Shigetoshi Sugawa
Keyword(s):  
Cmos Image Sensor ◽  
Image Sensor ◽  
Paper Analysis ◽  
Diffusion Capacitance

Determination of the Emission of Volatile Organic Compounds from Leather Seats in Environmental Test Chamber

2018 ◽  
Vol 768 ◽  
pp. 31-35
Author(s):  
Jin Wang ◽  
Zhen Zhu Ma ◽  
Lu Chen ◽  
Hong Juan Sun ◽  
Wu Kun Fan
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Test Chamber ◽  
Paper Analysis ◽  
National Standard ◽  
Test Results ◽  
Total Volatile Organic Compound ◽  
Volatile Organic ◽  
Environmental Test

With reference to the international standard ISO16000-9 and the national standard GB/T 31106-14, this paper has chosen leather seats as the research object in order to study the emission of volatile organic compounds (VOCs) and total volatile organic compound (TVOC). The test results show that about 21 species of VOCs released from the leather seats were measured, including several types of aldehydes, ketones, aromatic hydrocarbon ,hydrocarbon, lipids and so on.This paper analysis the possible sources of volatile organic compounds in leather seats as well.

Analysis on Parking Problem for Residential Area

2012 ◽  
Vol 193-194 ◽  
pp. 1075-1078
Author(s):  
Xue Ying Wang ◽  
Chun Xiang Liu ◽  
Dong Xu
Keyword(s):  
Difficult Problem ◽  
Paper Analysis ◽  
Residential Area ◽  
Residential Areas ◽  
Parking Problem ◽  
Parking Facilities ◽  
Day By Day ◽  
Living Area ◽  
The Way

Currently, small car quantity of residents in the our country city is raise year by year.The parking problem of in each city's living area is outstanding day by day. Aimming at the difficult problem of parking the car, The paper analysis the reason for producing it, probes the countermeasures and solutions to the parking problems in residential areas from two aspects of parking index and the way of parking facilities.

scholarly journals Estimation of Optimal Time Step and Compare with of ODE Solver of MATLAB Package of RLC Circuit using Numerical Methods

1970 ◽  
Vol 7 (1) ◽  
pp. 67-73 ◽  
Author(s):  
Sheikh Md Rabiul Islam
Keyword(s):  
Mesh Size ◽  
Paper Analysis ◽  
Optimal Time ◽  
Time Step ◽  
Minimum Error ◽  
Optimal Output ◽  
Runge Kutta Method ◽  
Rlc Circuit ◽  
Matlab Package ◽  
Theoretical Results

In this paper analysis of a RLC circuit model that has been described optimal time step and minimize of error using numerical method. The goal is to reach the optimal time response due to the input for which optimal output response reaches a minimum error and also compared with ODE solver of MATLAB packages for the different cell (mesh) size of the RLC model. Table is constructed of the model to evaluate optimal time step and also CPU time into the simulation using MATLAB 7.6.0(R2008a).The values of register, capacitor and inductor as well as electromagnetic force are obtained through the mathematical relations of the model. The general analysis of the RLC circuit due to the optimal time step and minimum error is developed after several analysis and operations. The theoretical results show effectiveness of optimized of the model. Keywords: Optimal time step; MATLAB; Trapezoidal; Implicit Euler; Runge-Kutta method; RLC circuit. DOI: http://dx.doi.org/10.3329/diujst.v7i1.9650   Daffodil International University Journal of Science and Technology Vol.7(1) 2012 67-73

Research on an UCON Extension Model Applicable to Industrial Control

2010 ◽  
Vol 20-23 ◽  
pp. 470-476
Author(s):  
Ze Tao Jiang ◽  
Jia Fei He
Keyword(s):  
Heat Treatment ◽  
Control System ◽  
Distributed Control ◽  
Paper Analysis ◽  
Distributed Control System ◽  
Unified Framework ◽  
Industrial Control ◽  
Extension Model ◽  
Formalized Description ◽  
And Task

Although UCON makes a unified framework for research on modern access control, it is not applicable enough due to fact that it only gives out a conceptual model. In this paper, analysis and extension have been made on UCON, role and task factors are introduced to it and combined with the conception of domain, an UCON extension model—UCONTR model, which is applicable to industrial control, is proposed. Its formalized description is given in the next step. Finally, the application of UCONTR on distributed control system for heat treatment is introduced in detail.

Sign in / Sign up

Export Citation Format

Share Document