Nonlinear Buckling and Postbuckling Behavior of 3D Braided Composite Cylindrical Shells Under External Pressure Loads in Thermal Environments

2009 ◽  
Vol 131 (6) ◽  
Author(s):  
Zhi-Min Li ◽  
Zhong-Qin Lin ◽  
Guan-Long Chen
Keyword(s):  
Cylindrical Shell ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Cylindrical Shells ◽  
Postbuckling Behavior ◽  
Fiber Volume ◽  
Nonlinear Buckling ◽  
Braided Composite ◽  
Thermal Environments ◽  
Composite Cylindrical Shells

Nonlinear buckling and postbuckling behavior for a 3D braided composite cylindrical shell of finite length subjected to lateral pressure, hydrostatic pressure, or external liquid pressure in thermal environments have been presented in this paper. Based on a new micromacromechanical model, a 3D braided composite may be treated as a cell system and the geometry of each cell is deeply dependent on its position in the cross section of the cylindrical shell. The material properties of the epoxy are expressed as a linear function of temperature. The governing equations are based on Reddy’s higher order shear deformation shell theory with a von Kármán–Donnell type of kinematic nonlinearity and including thermal effects. A singular perturbation technique is employed to determine the buckling pressure and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect braided composite cylindrical shells with different values of geometric parameter and of fiber volume fraction in different cases of thermal environmental conditions. The results show that the shell has lower buckling pressures and postbuckling paths when the temperature-dependent properties are taken into account. The results reveal that the temperature changes, the fiber volume fraction, and the shell geometric parameter have a significant effect on the buckling pressure and postbuckling behavior of braided composite cylindrical shells.

Thermal Postbuckling Analysis of 3D Braided Composite Cylindrical Shells

2010 ◽  
Vol 26 (2) ◽  
pp. 113-122 ◽  
Author(s):  
Z.-M. Li ◽  
D.-Q. Yang
Keyword(s):  
Cylindrical Shell ◽  
Geometric Parameter ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Cylindrical Shells ◽  
Postbuckling Behavior ◽  
Fiber Volume ◽  
Braided Composite ◽  
Thermal Postbuckling ◽  
Composite Cylindrical Shells

AbstractThermal postbuckling analysis is presented for 3D braided composite cylindrical shell of finite length subjected to a uniform temperature rise. Based on a micro-macro-mechanical model, a 3D braided composite may be as a cell system and the geometry of each cell is deeply dependent on its position in the cross-section of the cylindrical shell. The material properties of epoxy are expressed as a linear function of temperature. The governing equations are based on Reddy's higher order shear deformation shell theory with a von Kármán-Donnell-type of kinematic nonlinearity and including thermal effects. A singular perturbation technique is employed to determine the buckling temperatures and postbuckling behaviors of 3D braided composite cylindrical shells. The numerical illustrations concern the postbuckling behavior of perfect and imperfect, braided composite cylindrical shells with different values of geometric parameter and of fiber volume fraction. The results show that the shell has lower buckling temperatures and postbuckling equilibrium paths when the temperature-dependent properties are taken into account. The results reveal that the fiber volume fraction, braiding angle and the shell geometric parameter have a significant effect on the thermal buckling and postbuckling behavior of braided composite cylindrical shells.

Nonlinear buckling of orthogonal carbon nanotube-reinforced composite cylindrical shells under axial compression surrounded by elastic foundation in thermal environment

2019 ◽  
Vol 08 (04) ◽  
pp. 1950016 ◽  
Author(s):  
Vu Hoai Nam ◽  
Nguyen Thi Phuong ◽  
Vu Minh Duc
Keyword(s):  
Carbon Nanotube ◽  
Elastic Foundation ◽  
Axial Compression ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Cylindrical Shells ◽  
Geometrical Parameters ◽  
Postbuckling Behavior ◽  
Nonlinear Buckling ◽  
Reinforced Composite

Nonlinear buckling and postbuckling of orthogonal carbon nanotube-reinforced composite (Orthogonal CNTRC) cylindrical shells subjected to axial compression in thermal environments surrounded by elastic foundation are presented in this paper. Two layers of shell are reinforced by carbon nanotube (CNT) in two orthogonal directions (longitudinal and circumferential directions). Based on Donnell’s shell theory with von Karman’s nonlinearity and the Galerkin method, the governing equations are established to obtain the critical buckling loads and postbuckling load-deflection curves. The large effects of CNT volume fraction, temperature change, elastic foundation and geometrical parameters of cylindrical shells on the buckling load and postbuckling behavior of Orthogonal CNTRC cylindrical shells are obtained.

An analytical approach to the nonlinear buckling behavior of axially compressed auxetic-core cylindrical shells with carbon nanotube-reinforced coatings

2021 ◽  
pp. 146442072110333
Author(s):  
Le Ngoc Ly ◽  
Vu Minh Duc ◽  
Nguyen-Thoi Trung ◽  
Nguyen Thi Phuong ◽  
Dang Thuy Dong ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Volume Fraction ◽  
Load Capacity ◽  
Cylindrical Shells ◽  
Compressive Load ◽  
Functionally Graded ◽  
Honeycomb Lattice ◽  
Geometrical Parameters ◽  
Postbuckling Behavior ◽  
Nonlinear Buckling

Auxetic materials are usually designed as cores for structures subject to high impulse loads. Furthermore, the lightweight and high load capacity of the auxetic core construction is also an important advantage even for structures subjected to static loads. The combination of auxetic core and face sheets made by the advanced composite materials is a solution to dramatically increase the load-carrying capacity of the structure. In this paper, a new design of auxetic-core cylindrical shells with carbon nanotube-reinforced coatings is presented. Additionally, the nonlinear buckling behaviors of auxetic-core cylindrical shells with carbon nanotube-reinforced coatings under axially compressive loads are investigated. Three distributed types of functionally graded carbon nanotube-reinforced coatings and the honeycomb lattice form of the auxetic core are investigated. The homogenization model for auxetic lattice structures is considered to constitute the formulations of stiffnesses of the core layer. The nonlinear basic formulations are formulated by using the geometrically nonlinear Donnell shell theory considering Pasternak’s foundation. The Galerkin procedure can be applied three times for three states of buckling behaviors, and the expressions of the compressive load-maximal deflection and compressive load-average end shortening postbuckling curves are achieved. The numerically obtained investigations present the significant effects of auxetic core, volume fraction, direction arrangement and distributed law of carbon nanotube, foundation stiffnesses, geometrical parameters of auxetic core and shell on the critical buckling load and postbuckling behavior of structures.

Monitoring of mechanical properties of prestressed glass fiber epoxy composites over 12 months after fabrication

2021 ◽  
pp. 002199832110047
Author(s):  
Mahmoud Mohamed ◽  
Siddhartha Brahma ◽  
Haibin Ning ◽  
Selvum Pillay
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Flexural Strength ◽  
Compressive Residual Stress ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Epoxy Composites ◽  
Flexural Properties ◽  
Initial Increase ◽  
Fiber Volume

Fiber prestressing during matrix curing can significantly improve the mechanical properties of fiber-reinforced polymer composites. One primary reason behind this improvement is the generated compressive residual stress within the cured matrix, which impedes cracks initiation and propagation. However, the prestressing force might diminish progressively with time due to the creep of the compressed matrix and the relaxation of the tensioned fiber. As a result, the initial compressive residual stress and the acquired improvement in mechanical properties are prone to decline over time. Therefore, it is necessary to evaluate the mechanical properties of the prestressed composites as time proceeds. This study monitors the change in the tensile and flexural properties of unidirectional prestressed glass fiber reinforced epoxy composites over a period of 12 months after manufacturing. The composites were prepared using three different fiber volume fractions 25%, 30%, and 40%. The results of mechanical testing showed that the prestressed composites acquired an initial increase up to 29% in the tensile properties and up to 32% in the flexural properties compared to the non-prestressed counterparts. Throughout the 12 months of study, the initial increase in both tensile and flexural strength showed a progressive reduction. The loss ratio of the initial increase was observed to be inversely proportional to the fiber volume fraction. For the prestressed composites fabricated with 25%, 30%, and 40% fiber volume fraction, the initial increase in tensile and flexural strength dropped by 29%, 25%, and 17%, respectively and by 34%, 26%, and 21%, respectively at the end of the study. Approximately 50% of the total loss took place over the first month after the manufacture, while after the sixth month, the reduction in mechanical properties became insignificant. Tensile modulus started to show a very slight reduction after the fourth/sixth month, while the flexural modulus reduction was observed from the beginning. Although the prestressed composites displayed time-dependent losses, their long-term mechanical properties still outperformed the non-prestressed counterparts.

scholarly journals Effect of Fiber Volume Fraction on Behavior of Concrete Beams Made with Recycled Concrete Aggregates

2019 ◽  
Vol 253 ◽  
pp. 02004
Author(s):  
Wael Alnahhal ◽  
Omar Aljidda
Keyword(s):  
Fiber Volume Fraction ◽  
Concrete Beams ◽  
Volume Fraction ◽  
Recycled Concrete ◽  
Flexural Behavior ◽  
Beam Specimen ◽  
Rc Beam ◽  
Fiber Volume ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates

This study investigates the effect of using different volume fractions of basalt macro fibers (BMF) on the flexural behavior of concrete beams made with 100% recycled concrete aggregates (RCA) experimentally. A total of 4 reinforced concrete (RC) beam specimens were flexural tested until failure. The parameter investigated included the BMF volume fraction (0%, 0.5%, 1%, and 1.5%). The testing results of the specimens were compared to control beam specimen made with no added fibers. The experimental results showed that adding BMF improves the flexural capacity of the tested beams.

Sign in / Sign up

Export Citation Format

Share Document