Determination of the Creep Deflection of a Rivet in Double Shear

1959 ◽  
Vol 26 (2) ◽  
pp. 285-290
Author(s):  
Joseph Marin
Keyword(s):  
Theoretical Prediction ◽  
Power Plants ◽  
Elevated Temperatures ◽  
Structural Components ◽  
Double Shear ◽  
Riveted Joints ◽  
Simple Tension ◽  
Riveted Joint ◽  
Jet Power

Abstract Structural components of modern aircraft are subjected to elevated temperatures by jet power plants and by skin friction resulting from supersonic speeds. Some of these high-temperature-aircraft structural components are riveted connections. Considerable experimental data are available on the creep of riveted connections used in aircraft [1]. However, a survey of the literature shows a lack of results on the theoretical prediction of creep in riveted connections from the usual creep and creep-rupture data for simple tension. The creep of a riveted joint is dependent on various factors including rivet diameter, rivet lengths, and plate thicknesses. This influence of size means that each particular riveted joint must be tested to obtain the necessary information. A basic approach to the problem is theoretically to predict the creep behavior of riveted joints from creep in simple tension. One of the important parts of the creep deformation of a riveted connection, Fig. 1(a), is the creep of the rivet. This paper deals with an approximate theoretical prediction of the creep deflection in a rivet based upon the creep constants of the material in simple tension.

Destructive and Ultrasonic Investigations of Damage Development in Metallic Materials

2007 ◽  
Vol 340-341 ◽  
pp. 229-234 ◽  
Author(s):  
Zbigniew L. Kowalewski ◽  
Sławomir Mackiewicz ◽  
Jacek Szelażek
Keyword(s):  
Power Plants ◽  
Elevated Temperatures ◽  
Damage Identification ◽  
Damage Development ◽  
Damage Degree ◽  
Yield Loci ◽  
Development Evaluation ◽  
Non Destructive ◽  
Destructive Methods

Damage development due to creep under uniaxial tension at elevated temperatures is assessed using destructive and non-destructive methods in steels, commonly used in power plants or chemical industry, and in aluminium alloy used in aircrafts for responsible elements. The results obtained using two different destructive methods for assessments of damage development are critically discussed. In the first method the specimens of steel after different amounts of creep prestraining were stretched up to failure and variations of the selected tension parameters were taken into account for damage identification. In the second one, a damage degree was evaluated by studying variations of an initial yield locus position in the stress space and by determination of the yield loci dimensions. The ultrasonic investigations were selected as the non-destructive method for damage development evaluation.

The Role of Free-Living Amoebae Occurring in Heated Effluents as Causative Agents of Human Disease

1983 ◽  
Vol 15 (10) ◽  
pp. 135-147
Author(s):  
Maurice A Shapiro ◽  
Meryl H Karol ◽  
Georg Keleti ◽  
Jan L Sykora ◽  
A J Martinez
Keyword(s):  
Human Disease ◽  
Power Plants ◽  
Elevated Temperatures ◽  
Human Subjects ◽  
Cooling Towers ◽  
Free Living ◽  
Cooling Systems ◽  
Delayed Onset ◽  
Source Of Infection ◽  
Causative Agents

It has been shown that several pathogenic organisms may be frequently found in thermal effluents and cooling systems of coal fired power plants. One of them is pathogenic Naegleria fowleri, the causative agent of an acute fatal human disease - primary amoebic meningoencephalitis (PAM). In our study two out of eight power plants investigated, harbored pathogenic N. fowleri in heated water or cooling towers. The occurrence of this organism was related to elevated temperatures. No significant correlation was found for other biological and chemical parameters. In addition, pathogenic Acanthamoeba which causes granulomatous amoebic encephalitis (GAE) was found in the tested heated effluents from coal fired power plants. Non-pathogenic strains of N. fowleri as well as other free-living and “harmless” amoebae were also very abundant in effluents from all investigated coal fired power plants and cooling towers. It has been reported that several species of nonpathogenic amoebae were isolated from humidifiers and air conditioning systems. Serological testing of symptomatic human subjects has indicated that these organisms may be one of the causative agents of hypersensitivity pneumonitis. An experimental study performed in our laboratory involved testing of guinea pigs sensitized by injection of axenic, non-pathogenic N. gruberi. Delayed onset skin reactivity was apparent in all animals injected with the antigen. Antibodies were detected in all sensitized animals. Bronchial provocation challenge employed to investigate pulmonary hypersensitivity was also used, and yielded positive results. All the sensitized animals displayed delayed onset respiratory responses. The results of this study indicate that not only pathogenic but also non-pathogenic free-living amoebae may be important causative agents of human disease. The occurrence of these organisms in cooling systems from coal fired power plants indicates that these facilities may be an important source of infection.

scholarly journals Chlorine-Functional Silsesquioxanes (POSS-Cl) as Effective Flame Retardants and Reinforcing Additives for Rigid Polyurethane Foams

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3979
Author(s):  
Anna Strąkowska ◽  
Sylwia Członka ◽  
Karolina Miedzińska ◽  
Krzysztof Strzelec
Keyword(s):  
Flame Retardants ◽  
Elevated Temperatures ◽  
Bending Strength ◽  
Reaction System ◽  
Fire Retardant ◽  
Polyurethane Foams ◽  
Polymerization Reaction ◽  
Three Point Bending ◽  
One Step

The subject of the research was the production of silsesquioxane modified rigid polyurethane (PUR) foams (POSS-Cl) with chlorine functional groups (chlorobenzyl, chloropropyl, chlorobenzylethyl) characterized by reduced flammability. The foams were prepared in a one-step additive polymerization reaction of isocyanates with polyols, and the POSS modifier was added to the reaction system in an amount of 2 wt.% polyol. The influence of POSS was analyzed by performing a series of tests, such as determination of the kinetics of foam growth, determination of apparent density, and structure analysis. Compressive strength, three-point bending strength, hardness, and shape stability at reduced and elevated temperatures were tested, and the hydrophobicity of the surface was determined. The most important measurement was the determination of the thermal stability (TGA) and the flammability of the modified systems using a cone calorimeter. The obtained results, after comparing with the results for unmodified foam, showed a large influence of POSS modifiers on the functional properties, especially thermal and fire-retardant, of the obtained PUR-POSS-Cl systems.

Performance Testing of Coal Fired Power Plants

2007 ◽  
Author(s):  
Shane E. Powers ◽  
William C. Wood
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Performance Test ◽  
Model Development ◽  
Performance Testing ◽  
The United States ◽  
Plant Performance ◽  
Cycle Performance ◽  
Test Program

With the renewed interest in the construction of coal-fired power plants in the United States, there has also been an increased interest in the methodology used to calculate/determine the overall performance of a coal fired power plant. This methodology is detailed in the ASME PTC 46 (1996) Code, which provides an excellent framework for determining the power output and heat rate of coal fired power plants. Unfortunately, the power industry has been slow to adopt this methodology, in part because of the lack of some details in the Code regarding the planning needed to design a performance test program for the determination of coal fired power plant performance. This paper will expand on the ASME PTC 46 (1996) Code by discussing key concepts that need to be addressed when planning an overall plant performance test of a coal fired power plant. The most difficult aspect of calculating coal fired power plant performance is integrating the calculation of boiler performance with the calculation of turbine cycle performance and other balance of plant aspects. If proper planning of the performance test is not performed, the integration of boiler and turbine data will result in a test result that does not accurately reflect the true performance of the overall plant. This planning must start very early in the development of the test program, and be implemented in all stages of the test program design. This paper will address the necessary planning of the test program, including: • Determination of Actual Plant Performance. • Selection of a Test Goal. • Development of the Basic Correction Algorithm. • Designing a Plant Model. • Development of Correction Curves. • Operation of the Power Plant during the Test. All nomenclature in this paper utilizes the ASME PTC 46 definitions for the calculation and correction of plant performance.

Sign in / Sign up

Export Citation Format

Share Document