Computational Fluid Dynamics Simulation of Flow-Mixing and Heat Transfer in 4 × 4 Rod Bundle With a Twist-Vane Spacer Grid

2019 ◽  
Vol 5 (4) ◽  
Author(s):  
Ganesh Lal Kumawat ◽  
Anuj Kumar Kansal ◽  
Naresh Kumar Maheshwari ◽  
Avaneesh Sharma
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Atomic Energy ◽  
Cfd Simulations ◽  
Spacer Grid ◽  
Fuel Rod ◽  
Rod Bundle ◽  
Flow Mixing ◽  
Computational Fluid Dynamics Cfd

The clearance between fuel rods is maintained by spacer grid or helical wire wrap. Thermal-hydraulic characteristics inside fuel rod bundle are strongly influenced by the spacer grid geometry and the bundle pitch-to-diameter (P/D) ratio. This includes the maximum fuel temperature, critical heat flux, as well as pressure drop through the fuel bundle. An understanding of the detailed structure of flow mixing and heat transfer in a fuel rod bundle geometry is therefore an important aspect of reactor core design, both in terms of the reactor's safe and reliable operation, and with regard to optimum power extraction. In this study, computational fluid dynamics (CFD) simulations are performed to investigate isothermal turbulent flow mixing and heat transfer behavior in 4 × 4 rod bundle with twist-vane spacer grid with P/D ratio of 1.35. This work is carried out under International Atomic Energy Agency (IAEA) co-ordinated research project titled as “Application of Computational Fluid Dynamics (CFD) Codes for Nuclear Power Plant Design.” CFD simulations are performed using open source CFD code OpenFOAM. Numerical results are compared with experimental data from Korea Atomic Energy Research Institute (KAERI) and found to be in good agreement.

scholarly journals Rapid pivot feeding in pipefish: flow effects on prey and evaluation of simple dynamic modelling via computational fluid dynamics

2008 ◽  
Vol 5 (28) ◽  
pp. 1291-1301 ◽  
Author(s):  
Sam Van Wassenbergh ◽  
Peter Aerts
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Analytical Model ◽  
Dynamic Modelling ◽  
Head Rotation ◽  
Theoretical Models ◽  
Cfd Simulations ◽  
Deceleration Phase ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Effects

Most theoretical models of unsteady aquatic movement in organisms assume that including steady-state drag force and added mass approximates the hydrodynamic force exerted on an organism's body. However, animals often perform explosively quick movements where high accelerations are realized in a few milliseconds and are followed closely by rapid decelerations. For such highly unsteady movements, the accuracy of this modelling approach may be limited. This type of movement can be found during pivot feeding in pipefish that abruptly rotate their head and snout towards prey. We used computational fluid dynamics (CFD) to validate a simple analytical model of cranial rotation in pipefish. CFD simulations also allowed us to assess prey displacement by head rotation. CFD showed that the analytical model accurately calculates the forces exerted on the pipefish. Although the initial phase of acceleration changes the flow patterns during the subsequent deceleration phase, the accuracy of the analytical model was not reduced during this deceleration phase. Our analysis also showed that prey are left approximately stationary despite the quickly approaching pipefish snout. This suggests that pivot-feeding fish need little or no suction to compensate for the effects of the flow induced by cranial rotation.

scholarly journals Effect of hydraulic and geometric factors upon leakage flow rate in pressurized pipes

RBRH ◽  
2021 ◽  
Vol 26 ◽  
Author(s):  
Mayara Francisca da Silva ◽  
Fábio Veríssimo Gonçalves ◽  
Johannes Gérson Janzen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Rate ◽  
Leakage Flow ◽  
Cfd Simulations ◽  
Mean Velocity ◽  
Leakage Flow Rate ◽  
Geometric Factors ◽  
Leakage Area ◽  
Computational Fluid Dynamics Cfd

ABSTRACT Computational Fluid Dynamics (CFD) simulations of a leakage in a pressurized pipe were undertaken to determine the empirical effects of hydraulic and geometric factors on the leakage flow rate. The results showed that pressure, leakage area and leakage form, influenced the leakage flow rate significantly, while pipe thickness and mean velocity did not influence the leakage flow rate. With relation to the interactions, the effect of pressure upon leakage flow rate depends on leakage area, being stronger for great leakage areas; the effects of leakage area and pressure on leakage flow rate is more pronounced for longitudinal leakages than for circular leakages. Finally, our results suggest that the equations that predict leakage flow rate in pressurized pipes may need a revision.

scholarly journals The Protect Air Film of an Exterior Window

2021 ◽  
Author(s):  
Sanaz Dianat
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Glass Temperature ◽  
Experimental Procedure ◽  
Wind Speeds ◽  
Computational Fluid Dynamics Cfd ◽  
Air Film ◽  
The Impact

The research paper investigates the impact of a window’s exterior air film on the assembly temperature. The exterior air film constitutes a vital portion of a window’s insulating values. The air film increases the temperature of the window exterior pane to a temperature above ambient temperature. The air film also rises the interior glass temperature and reduces the heat transfer from the interior surface. According to computational fluid dynamics (CFD), the air film is removed in windy conditions, decreasing the window temperature on the outside as well as on the inside. The idea behind the project is to carry out an experimental procedure on three different windows to validate the CFD results, which indicates the effect of various wind speeds. Keyword: Exterior air film, computational fluid dynamics, window assembly, wind speed

scholarly journals The Aerodynamics of a Diabolo

2021 ◽  
Author(s):  
Darren Jia
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Angular Momentum ◽  
Flow Pattern ◽  
High Spin ◽  
Angular Speed ◽  
Geometric Shape ◽  
Cfd Simulations ◽  
Resistive Torque ◽  
Computational Fluid Dynamics Cfd

Diabolo is a popular game in which the object can be spun at up to speeds of 5000 rpm. This high spin velocity gives the diabolo the necessary angular momentum to remain stable. The shape of the diabolo generates an interesting air flow pattern. The viscous air applies a resistive torque on the fast spinning diabolo. Through computational fluid dynamics (CFD) simulations it's shown that the resistive torque has an interesting dependence on the angular speed of the diabolo. Further, the geometric shape of the diabolo affects the dependence of torque on angular speed.

scholarly journals The Protect Air Film of an Exterior Window

2021 ◽  
Author(s):  
Sanaz Dianat
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Glass Temperature ◽  
Experimental Procedure ◽  
Wind Speeds ◽  
Computational Fluid Dynamics Cfd ◽  
Air Film ◽  
The Impact

The research paper investigates the impact of a window’s exterior air film on the assembly temperature. The exterior air film constitutes a vital portion of a window’s insulating values. The air film increases the temperature of the window exterior pane to a temperature above ambient temperature. The air film also rises the interior glass temperature and reduces the heat transfer from the interior surface. According to computational fluid dynamics (CFD), the air film is removed in windy conditions, decreasing the window temperature on the outside as well as on the inside. The idea behind the project is to carry out an experimental procedure on three different windows to validate the CFD results, which indicates the effect of various wind speeds. Keyword: Exterior air film, computational fluid dynamics, window assembly, wind speed

scholarly journals Comparison of Blade Element Method and CFD Simulations of a 10 MW Wind Turbine

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 73 ◽  
Author(s):  
Galih Bangga
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Separation ◽  
Spatial Interpolation ◽  
Flow Conditions ◽  
Cfd Simulations ◽  
Computational Fluid Dynamics Cfd ◽  
Correction Terms ◽  
Selection Of ◽  
Blade Element

The present studies deliver the computational investigations of a 10 MW turbine with a diameter of 205.8 m developed within the framework of the AVATAR (Advanced Aerodynamic Tools for Large Rotors) project. The simulations were carried out using two methods with different fidelity levels, namely the computational fluid dynamics (CFD) and blade element and momentum (BEM) approaches. For this purpose, a new BEM code namely B-GO was developed employing several correction terms and three different polar and spatial interpolation options. Several flow conditions were considered in the simulations, ranging from the design condition to the off-design condition where massive flow separation takes place, challenging the validity of the BEM approach. An excellent agreement is obtained between the BEM computations and the 3D CFD results for all blade regions, even when massive flow separation occurs on the blade inboard area. The results demonstrate that the selection of the polar data can influence the accuracy of the BEM results significantly, where the 3D polar datasets extracted from the CFD simulations are considered the best. The BEM prediction depends on the interpolation order and the blade segment discretization.

Sign in / Sign up

Export Citation Format

Share Document