Numerical Comparison of Leakage Flow and Rotordynamic Characteristics for Two Types of Labyrinth Seals With Baffles

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Yuanqiao Zhang ◽  
Jun Li ◽  
Zhigang Li ◽  
Xin Yan
Keyword(s):  
Rotational Speed ◽  
Flow Resistance ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Numerical Comparison ◽  
Vibration Frequencies ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Brush Seal ◽  
Swirl Intensity

Abstract Cavity separation baffles can decrease the circumferential swirl intensity of labyrinth seals and increase the seals' rotordynamic characteristics. Compared with conventional baffles, the bristle packs of brush seal baffles can contact the rotor directly, thereby further reducing the swirl intensity of the seal cavity. This paper, using the numerical model combining a multifrequency elliptical whirling orbit model, a porous medium model, and transient Reynolds-averaged Navier–Stokes (RANS) solutions, compares the leakage flow and rotordynamic characteristics of a labyrinth seal with brush-seal baffles (LSBSB) and a labyrinth seal with conventional baffles (LSCB). Ideal air flows into the seal at an inlet preswirl velocity of 0 m/s (or 60 m/s or 100 m/s), total pressure of 690 kPa, and temperature of 14 °C. The outlet static pressure is 100 kPa and the rotational speed is 7500 r/min (surface speed of 66.8 m/s) or 15,000 r/min (surface speed of 133.5 m/s). Numerical results show that the LSBSB possesses the slightly less leakage flow rate than the LSCB due to the flow resistance of the bristle pack to the fluid. Compared with the LSCB, the LSBSB shows a higher positive effective stiffness (Keff) at all considered vibration frequencies and a higher effective damping (Ceff) for most vibration frequencies. What is more, the crossover frequency (fc0) of the LSBSB is significantly lower than that of the LSCB, which means that the LSBSB has a wider frequency range offering positive effective damping. The increasing inlet preswirl velocity and rotational speed only slightly affect the Keff for both seals. The Ceff of two seals decreases as the inlet preswirl velocity rises, especially for the LSCB. The Ceff of the LSCB slightly decreases because of the increasing rotational speed. In contrast, the Ceff of the LSBSB is not sensitive to the changes in rotational speed. In a word, the LSBSB possesses superior rotordynamic performance to the LSCB. Note that this work also investigates the leakage flow and rotordynamic characteristics a labyrinth seal with inclined baffles (LSIB) under the condition of u0 = 60 m/s and n = 15,000 r/min. The inclined baffles of the LSIB are same as the backing plates of LSBSB baffles. The LSIB has rotordynamic coefficients almost equal to the LSCB. Hence, the reason why the LSBSB possesses better rotordynamic performance than that of the LSCB is the flow resistance of bristle packs of brush seal baffles, not the inclination direction variation of baffles.

Effects of Mushroom-Shaped Tooth Wear on the Leakage Performance and Rotordynamic Coefficients of Labyrinth Seals

2018 ◽  
Author(s):  
Yaoxing Chen ◽  
Zhigang Li ◽  
Xin Yan ◽  
Jun Li
Keyword(s):  
Tooth Wear ◽  
Labyrinth Seal ◽  
Linear Increase ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Crossover Frequency ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Leakage Flow Rate ◽  
Mesh Technique

The leakage performance and rotordynamic coefficients of the labyrinth seal are changed when a mushroom-shaped tooth wear occurs in actual transient operation resulting from rubbing and wear between stator teeth and the rotor. The objective of current study was to numerically investigate and characterize the variation of the leakage performance and rotordynamic coefficients as a result of an increased mushroom-shaped tooth wear at two typical inlet preswirl velocities and enhance the rotor stability of the after-damage labyrinth seal. In this paper, the Unsteady Reynolds-Averaged Navier-Stokes (URANS) solution based on the multi-frequency elliptical orbit rotor whirling mode and dynamic mesh technique was used to calculate the leakage flow rates and rotordynamic coefficients of the labyrinth seal with an unworn clearance and three after-damage clearances at two inlet preswirl velocities. The accuracy and availability of adopted transient computational methods in this work were validated by the published experimental data. Also, the influence of tooth mushroom radius and each cavity in the labyrinth seal on the rotor stability and some approaches to improve the rotor stability were discussed and conducted. The conclusion shows that the leakage flow rate increases with an increase in the clearance, and a linear increase is expected when the after-damage clearance is over 0.4 mm. An increase in the after-damage clearance always leads to a drop in the effective damping or an increase in crossover frequencies. Also, the additional tooth mushroom radius plays an important role in the effective damping or crossover frequency and can not be neglected. The upstream cavity always possesses lower crossover frequency, and a drop of 9.9 Hz in the crossover frequency is found when the seal entrance axially extends 5 mm. In addition, the crossover frequency is decreased from 243.5 Hz to 164.2 Hz when typical anti-swirl brakes are installed in this labyrinth seal with the worn mushroom-shaped teeth.

Impact of Frequency Dependence of Gas Labyrinth Seal Rotordynamic Coefficients on Centrifugal Compressor Stability

2010 ◽  
Author(s):  
Giuseppe Vannini ◽  
Manish R. Thorat ◽  
Dara W. Childs ◽  
Mirko Libraschi
Keyword(s):  
Molecular Weight ◽  
Numerical Model ◽  
Control Volume ◽  
Labyrinth Seal ◽  
Labyrinth Seals ◽  
Frequency Dependent ◽  
Rotordynamic Coefficients ◽  
Frequency Independent ◽  
Rotor Surface ◽  
Independent Model

A numerical model developed by Thorat & Childs [1] has indicated that the conventional frequency independent model for labyrinth seals is invalid for rotor surface velocities reaching a significant fraction of Mach 1. A theoretical one-control-volume (1CV) model based on a leakage equation that yields a reasonably good comparison with experimental results is considered in the present analysis. The numerical model yields frequency-dependent rotordynamic coefficients for the seal. Three real centrifugal compressors are analyzed to compare stability predictions with and without frequency-dependent labyrinth seal model. Three different compressor services are selected to have a comprehensive scenario in terms of pressure and molecular weight (MW). The molecular weight is very important for Mach number calculation and consequently for the frequency dependent nature of the coefficients. A hydrogen recycle application with MW around 8, a natural gas application with MW around 18, and finally a propane application with molecular weight around 44 are selected for this comparison. Useful indications on the applicability range of frequency dependent coefficients are given.

Rotordynamic Characteristics of the Straight-Through Labyrinth Seal Based On the Applicability Analysis of Leakage Models Using Bulk-Flow Method

2021 ◽  
Author(s):  
Tianhao Wang ◽  
Zhigang Li ◽  
Jun Li
Keyword(s):  
Rotational Speed ◽  
Control Volume ◽  
Labyrinth Seal ◽  
Bulk Flow ◽  
Inlet Pressure ◽  
Leakage Flow ◽  
Flow Method ◽  
Leakage Model ◽  
Outlet Pressure ◽  
Prediction Approach

Abstract Labyrinth seals are widely applied in the turbomachinery to control the leakage flow through the clearance between the stationary and rotating components. The fluid excitation induced by the labyrinth seal would deteriorate the stability of turbomachinery shaft. Developing an accurate and rapid prediction approach is crucial for the analysis of the fluid excitation rotordynamics of the labyrinth seal. The objective of this study is to analyze the applicability of leakage models using Bulk-Flow method and investigate the factors affecting the rotordynamic characteristics of the labyrinth seal. An elliptical orbit for rotor whirling was assumed in the one-control-volume Bulk-Flow model considering an isentropic process to predict the frequency-dependent rotordynamic coefficients of the labyrinth seal. The optimal leakage model was determined by comprehensively analyzing the applicability of 72 leakage models. Employing the optimal leakage model in the Bulk-Flow method, the effects of sealing clearance, pressure ratio, preswirl ratio and rotational speed on the rotordynamic characteristics of the labyrinth seal were investigated. The conclusions show that the Bulk-Flow method has an average prediction error of around 10% for the leakage flow rate, cross-coupled stiffness and direct damping when equipped with the optimal leakage model. Increasing preswirl ratio has a significantly destabilizing effect on the rotor stability, while the influence of increasing rotational speed is strongly related to preswirl direction. The effective damping of the labyrinth seal is sensitive to the inlet pressure, but insensitive to the outlet pressure and sealing clearance. The crossover frequency is almost impervious to the inlet pressure, outlet pressure and sealing clearance.

Hybrid Brush Pocket Damper Seals for Turbomachinery

2000 ◽  
Vol 122 (2) ◽  
pp. 330-336 ◽  
Author(s):  
Hector E. Laos ◽  
John M. Vance ◽  
Steven E. Buchanan
Keyword(s):  
Active Vibration Control ◽  
Design Feature ◽  
Aircraft Engine ◽  
Computer Code ◽  
Labyrinth Seal ◽  
Dual Function ◽  
Rotating Shaft ◽  
Labyrinth Seals ◽  
Low Leakage ◽  
Brush Seal

Pocket damper seals perform a dual function: both sealing the pressurized gas around a rotating shaft and providing large amounts of vibration damping. The annular cavity between the labyrinth seal teeth is subdivided into separate annular cavities around the circumference of the rotor by partitioning walls. Also, the upstream and downstream teeth have different radial clearances to the rotor. These seals have been shown to provide a remarkable amount of direct damping to attenuate vibration in turbomachinery, but they generally leak more than conventional labyrinth seals if both seals have the same minimum clearance. Conversely, brush seals allow less than half the leakage of labyrinth seals, but published test results show no significant amount of damping. They are considered to be a primary choice for the seals in new aircraft engine designs because of their low leakage. This paper will describe a recently invented hybrid brush/pocket damper seal that combines high damping with low leakage. Previous brush seal results were studied and calculations were made to select a brush seal to combine with the pocket damper design. The result is a hybrid seal with high damping and low leakage. A special design feature can also allow active vibration control as a bonus benefit. A computer code written for the original pocket damper seal was modified to include the brush element at the exit blade. Results from the computer code indicate that the hybrid seal can have less leakage than a six bladed (or 6 knives) labyrinth seal along with orders of magnitude more damping. Experimental evaluations of the damping and leakage performance of the hybrid seal are being conducted by the authors. The experimental work reported here tested the damping capability of the new hybrid brush seal by exciting the seal journal through an impedance head. A conventional six-bladed labyrinth seal of the same working dimensions was also tested. The brush hybrid pocket damper seal is found to leak less than the labyrinth seal while producing two to three times more damping than the original pocket damper seal (orders of magnitude more than the conventional labyrinth). [S0742-4795(00)01102-9]

Segmentation Effects on Brush Seal Leakage and Rotordynamic Coefficients

2015 ◽  
Author(s):  
Alexander O. Pugachev ◽  
Manuel Gaszner ◽  
Christos Georgakis ◽  
Paul Cooper
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Labyrinth Seal ◽  
Performance Characteristics ◽  
Radial Clearance ◽  
Single Plane ◽  
Rotordynamic Coefficients ◽  
Damping Coefficients ◽  
Brush Seal ◽  
Stiffness And Damping

This paper studies the effect of brush seal segmentation on the seal performance characteristics. A brush-labyrinth sealing configuration arranged of one brush seal downstream and two labyrinth fins upstream is studied experimentally and theoretically. The studied brush seal is of welded design installed with zero cold radial clearance. The brush seal front and back rings as well as the bristle pack are segmented radially in a single plane using the electrical discharge machining technique. The segmentation procedure results in loss of bristles at the site of the cuts altering the leakage flow structure in the seal and its performance characteristics. Two test rigs are used to obtain leakage, as well as rotordynamic stiffness and damping coefficients of the seal at different pressure ratios. The CFD-based model is used to predict the seal performance and to study in detail local changes in the flow field due to the segmentation. A back-to-back comparison of the performance of non-segmented and segmented brush seals, as well as baseline labyrinth seal is provided. The obtained results demonstrate that the segmentation in general negatively affects the performance of the studied brush-labyrinth sealing configuration. However, the segmented brush seal shows increased direct damping coefficients.

A CFD Study on the Dynamic Coefficients of Labyrinth Seals

2012 ◽  
Author(s):  
Donghui Zhang ◽  
Chester Lee ◽  
Michael Cave
Keyword(s):  
High Speed ◽  
Fluid Dynamic ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Dynamic Coefficients ◽  
Rotating Impeller ◽  
Coupling Stiffness ◽  
Direct Stiffness ◽  
Compressor Efficiency

Labyrinth seals are widely used in gas compressors to reduce internal leakage and increase the compressor efficiency. Due to the eccentricity between the rotating impeller and the stationary part as *well as the shaft whirling motion, forces are generated when the leakage flow passing through the cavities and the seals. For a lot of applications with high speed and pressure, these forces can drive the system unstable. Thus, predicting the forces accurately become a very important for compressor rotordynamic designs. A lot of research and studies has been done to the seals itself, including bulk flow method, computational fluid dynamic (CFD) and test measurement. The seal and leakage flow interaction forces can be predicted relatively accurate. But very few research treat the seal and cavities as one component interacting with the leakage flow and produce the forces. This paper presents results of CFD investigations on the dynamic coefficients of one typical impeller eye seal and front cavity. The CFD results show that large forces are generated in the front cavity due to circumferential uniform pressure distribution, which caused by the downstream labyrinth seal. The forces generated in the front cavity are more than in the front seal. It was found that the inertia, damping, and stiffness are proportional to average pressure. The cross-coupling stiffness increases with speed with power of 2 while the direct stiffness increases with speed with power of about 1.7.

Influence of Lubrication Oil on the Performance of Carbon Fibre Brush Seals for Aero-Engines Bearing Chambers

2019 ◽  
Author(s):  
Bilal Outirba ◽  
Patrick Hendrick
Keyword(s):  
Carbon Fibre ◽  
Rotational Speed ◽  
Fibre Length ◽  
Operating Conditions ◽  
Geometrical Parameters ◽  
Labyrinth Seals ◽  
Brush Seal ◽  
Lubrication Oil ◽  
Brush Seals ◽  
Aero Engines

Abstract Carbon fibre brush seals are an alternative to labyrinth seals in aero-engines lubrication systems due to better sealing ability with low power loss. However, the use of brush seals still raises concerns about coking issues. In addition, the influence of oil on the brush seal behaviour needs to be fully assessed. This paper provides an experimental investigation of the effect of lubrication oil on the performance of carbon fibre brush seals under static and dynamic conditions. Eight brush seal samples of various geometrical designs were submitted to an environment recreating the working conditions of a modern aero-engine bearing chamber in terms of rotational speed, air pressure, and oil type of injection and temperature. The test results indicated that the performance of carbon fibre brush seals was deeply influenced by the presence of oil within fibres. Oil deeply influences leakage performance, depending on geometrical parameters (density, fibre length and interference) and operating conditions (oil temperature, rotational speed). Brush seal fibre pack is mainly prone to hydrodynamic lift and oil soaking, which is defined by the ability of lubrication oil to fill in properly the interstices between fibres. Viscosity and surface tension may be the key properties influencing oil soaking. Seal torque data corroborates the presence of a hydrodynamic lift. In addition, in absence of differential pressure, seal torque decrease with when oil temperature increases indicates the existence of a critical viscosity. Finally, oil lubrication within the bristles allows reduction of the inter-bristle friction, thus limiting hysteresis.

Effects of Labyrinth Fin Wear on Aerodynamic Performance of Turbine Stages: Part I — Bending Damages

2019 ◽  
Author(s):  
Xin Yan ◽  
Xinbo Dai
Keyword(s):  
Labyrinth Seal ◽  
Flow Fields ◽  
Aerodynamic Performance ◽  
Leakage Flow ◽  
Original Design ◽  
Labyrinth Seals ◽  
Sealing Performance ◽  
Forward Bending ◽  
Design Case ◽  
Isentropic Efficiency

Abstract Labyrinth seals are widely applied in turbo machines because of their geometrical simplicity, convenient installation, reliable operation and excellent sealing performance. However, in realistic operation process, they usually encounter transient conditions (starting-up, shutting down, etc.) and unavoidable vibrations, which may cause wear in the labyrinth fins. After rubbing, the sealing performance of labyrinth seal will be varied in contrast to the original design. Correspondingly, the aerodynamic efficiency of the turbine stage will be affected by the variation of leakage flow in rubbing process. However, in published literature with respect to the labyrinth seal wear, most of the attention has been paid on revealing sealing performance degradation of labyrinth seal itself. Few studies have been concentrated on the influence of labyrinth seal wear on aerodynamic performance of turbine stages. In such background, the present paper utilizes the numerical methods to investigate the effects of labyrinth seal bending damages on aerodynamic performance of turbine stages. Firstly, under several assumptions, the bending geometrical model was established to describe different degrees of bending damages. Secondly, using three-dimensional RANS simulations, the effects of effective clearance variation due to bending on leakage flow and flow fields in turbine stages were investigated. The overall performance of the turbine stages with teeth-bending damages was also compared with the original design case. The influence of the forward bending and backward bending of labyrinth seals were analyzed and compared with each other. The total-total isentropic efficiency of turbine stages, leakage rates, outlet flow angles, reaction degrees and profile static pressure distributions, entropic distributions and flow fields in seals were obtained and compared to the original design case. The results indicate that the leakage rates in the worn labyrinth seal are quite relevant to the effective clearance, especially for the backward bending damages. As the effective clearances in backward bending cases are increased by 0.2–0.6mm, the isentropic efficiency of turbine stages is decreased by about 1–2%. However, for the forward bending damages, the aerodynamic performance and leakage rates in turbine stages are not sensitive to the effective clearance.

scholarly journals Rotordynamic Coefficient and Leakage Test Results for Interlock and Tooth-on-Stator Labyrinth Seals

1988 ◽  
Author(s):  
Dara W. Childs ◽  
David A. Elrod ◽  
Keith Hale
Keyword(s):  
Labyrinth Seal ◽  
Damping Coefficient ◽  
Test Results ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Damping Coefficients ◽  
Leakage Test ◽  
Stiffness And Damping ◽  
Rotordynamic Coefficient

Test results (leakage and rotordynamic coefficients) are presented for an interlock and tooth-on-stator labyrinth seals. Tests were carried out with air at speeds out to 16,000 cpm and supply pressures up to 7.5 bars. The rotordynamic coefficients consist of direct and cross-coupled stiffness and damping coefficients. Damping-coefficient data have not previously been presented for interlock seals. The test results support the following conclusions: (a) The interlock seal leaks substantially less than labyrinth seals. (b) Destabilizing forces are lower for the interlock seal. (c) The labyrinth seal has substantially greater direct damping values than the interlock seal. A complete rotordynamics analysis is needed to determine which type of seal would yield the best stability predictions for a given turbomachinery unit.

Effects of Pressure Ratio and Rotational Speed on Leakage Flow and Cavity Pressure in the Staggered Labyrinth Seal

2011 ◽  
Vol 133 (11) ◽  
Author(s):  
Zhigang Li ◽  
Jun Li ◽  
Xin Yan ◽  
Zhenping Feng
Keyword(s):  
Experimental Data ◽  
Numerical Simulations ◽  
Rotational Speed ◽  
Stokes Equations ◽  
Pressure Ratio ◽  
Labyrinth Seal ◽  
Flow Coefficient ◽  
Leakage Flow ◽  
Cavity Pressure ◽  
Cavity Structure

Effects of pressure ratio and rotational speed on the leakage flow and cavity pressure characteristics of the rotating staggered labyrinth seal were investigated by means of experimental measurements and numerical simulations. The rotating seal test rig with turbine flowmeter and pressure measuring instruments was utilized to investigate the leakage flow of the staggered labyrinth seal at eight pressure ratios and five rotational speeds. The repeatability of the experimental data was demonstrated by three times measurements at different pressure ratios and fixed rotational speed. The three-dimensional Reynolds-averaged Navier–Stokes equations and standard k-ε turbulent model were also applied to study the leakage flow characteristics of the staggered labyrinth seal at the experimental conditions. The validation of the numerical approach was verified through comparison of the experimental data. The detailed flow field in the staggered labyrinth seal was illustrated according to the numerical simulations. The experimental and numerical results show that the leakage flow coefficient increases with increasing pressure ratio at the fixed rotational speed and is more sensitive to the smaller pressure ratio. The influence of rotational speed on the leakage flow coefficient is not obvious in the present rotational speed limitations. The cavity pressure coefficient in the staggered labyrinth seal decreases and is significantly influenced by the cavity structure along the flow direction.

Sign in / Sign up

Export Citation Format

Share Document