scholarly journals Application of Recess Vaned Casing Treatment to Axial Flow Fans

1989 ◽  
Author(s):  
A. R. Azimian ◽  
R. L. Elder ◽  
A. B. McKenzie
Keyword(s):  
Unsteady Flow ◽  
Frequency Response ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Axial Position ◽  
Flow Conditions ◽  
Peak Efficiency ◽  
Stall Margin ◽  
Casing Treatment

The effect of applying a vaned recessed casing treatment to a single stage axial flow fan has been investigated. The influence of the axial position of the recess relative to the rotor leading edge and other geometrical modifications of the vane passage have been examined. Significant improvements in stall margin were observed without (in some builds) loss in peak efficiency. Slow and fast frequency response yawmeter probes have been used in the study to examine both the steady flow conditions and the unsteady flow caused by rotating stall.

Application of Recess Vaned Casing Treatment to Axial Flow Fans

1990 ◽  
Vol 112 (1) ◽  
pp. 145-150 ◽  
Author(s):  
A. R. Azimian ◽  
R. L. Elder ◽  
A. B. McKenzie
Keyword(s):  
Unsteady Flow ◽  
Frequency Response ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Axial Position ◽  
Flow Conditions ◽  
Peak Efficiency ◽  
Stall Margin ◽  
Casing Treatment

The effect of applying a vaned recessed casing treatment to a single-stage axial flow fan has been investigated. The influences of the axial position of the recess relative to the rotor leading edge and other geometric modifications of the vane passage have been examined. Significant improvements in stall margin were observed without (in some builds) loss in peak efficiency. Slow and fast frequency response yawmeter probes have been used in the study to examine both the steady flow conditions and the unsteady flow caused by rotating stall.

Influencing Parameters of Tip Blowing Interacting With Rotor Tip Flow

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Cyril Guinet ◽  
André Inzenhofer ◽  
Volker Gümmer
Keyword(s):  
Geometric Model ◽  
Axial Compressor ◽  
Axial Flow ◽  
Navier Stokes ◽  
Axial Position ◽  
Design Parameters ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Casing Treatments

The design space of axial-flow compressors is restricted by stability issues. Different axial-type casing treatments (CTs) have shown their ability to enhance compressor stability and to influence efficiency. Casing treatments have proven to be effective, but there still is need for more detailed investigations and gain of understanding for the underlying flow mechanism. Casing treatments are known to have a multitude of effects on the near-casing 3D flow field. For transonic compressor rotors, these are more complex, as super- and subsonic flow regions alternate while interacting with the casing treatment. To derive design rules, it is important to quantify the influence of the casing treatment on the different tip flow phenomena. Designing a casing treatment in a way that it antagonizes only the deteriorating secondary flow effects can be seen as a method to enhance stability while increasing efficiency. The numerical studies are carried out on a tip-critical rotor of a 1.5-stage transonic axial compressor. The examined recirculating tip blowing casing treatment (TBCT) consists of a recirculating channel with an air off-take above the rotor and an injection nozzle in front of the rotor. The design and functioning of the casing treatment are influenced by various parameters. A variation of the geometry of the tip blowing, more specifically the nozzle aspect ratio, the axial position, or the tangential orientation of the injection port, was carried out to identify key levers. The tip blowing casing treatment is defined as a parameterized geometric model and is automatically meshed. A sensitivity analysis of the respective design parameters of the tip blowing is carried out on a single rotor row. Their impact on overall efficiency and their ability to improve stall margin are evaluated. The study is carried out using unsteady Reynolds-averaged Navier–Stokes (URANS) simulations.

Extensive Experimental Study of Circumferential Single Groove in an Axial Flow Compressor

2014 ◽  
Author(s):  
Jichao Li ◽  
Feng Lin ◽  
Sichen Wang ◽  
Juan Du ◽  
Chaoqun Nie ◽  
...  
Keyword(s):  
Experimental Study ◽  
Unsteady Flow ◽  
Axial Compressor ◽  
Axial Flow ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Good Tool ◽  
Stall Margin ◽  
Casing Treatment ◽  
Tip Leakage

Circumferential single-groove casing treatment becomes an interesting topic in recent few years, because it is a good tool to explore the interaction between the groove and the flow in blade tip region. The stall margin improvement (SMI) as a function of the axial groove location has been found for some compressors, such a trend cannot be predicted by steady high-fidelity CFD simulations. Recent efforts show that to catch such a trend, multi-passage, unsteady flow simulations are needed as the stalling mechanism itself involves cross-passage flows and unsteady dynamics. This indicates a need to validate unsteady numerical simulation results. In this paper, an extensive experimental study of a total of fifteen single casing grooves in a low-speed axial compressor rotor is presented, the groove location varies from 0.4% to 98.3% of axial tip chord are tested. The unsteady pressure data both at casing and at the blade wake with different groove locations are measured and processed, including the movement of trajectory of tip leakage flow, the evolution of unsteadiness of tip leakage flow (UTLF), the unsteady spectrum signature during the stall process, and the outlet unsteady flow characteristic along the span. These data provide a case study for validation of the unsteady CFD results, and may be helpful for further interpretation on the stalling mechanism affected by circumferential casing grooves.

scholarly journals Flow mechanism of affecting an axial flow compressor performance and stability with cross-blade slot casing treatments

2018 ◽  
Vol 233 (1) ◽  
pp. 17-36 ◽  
Author(s):  
HaoGuang Zhang ◽  
XuDong Zhang ◽  
YanHui Wu ◽  
WuLi Chu ◽  
HaiYang Kuang
Keyword(s):  
Axial Flow ◽  
Low Energy ◽  
Peak Efficiency ◽  
Stall Margin ◽  
Casing Treatment ◽  
Flow Loss ◽  
Stall Margin Improvement ◽  
And Performance ◽  
Flow Compressor ◽  
Casing Treatments

The objective of this study is to evaluate the effect of cross-blade slot casing treatment on the stability and performance of an axial flow compressor rotor. The experimental and unsteady calculated results both show that cross-blade slot casing treatment can generate about 22% stall margin improvement, and the compressor peak efficiency is reduced by about 13%. The detailed flow-field analyses indicate that the sucked and injected flow caused by the slots of cross-blade slot casing treatment can restrain the rotor tip passage blockage, which is made by the low energy tip clearance leakage vortex. When cross-blade slot casing treatment is applied, not only the rotor wheel flange work becomes lower in most of the rotor blade span, but also the flow loss in the blade tip passage becomes fairly large due to the strong interaction between the mainstream and the injected flows made by the slots. As a result, the compressor total pressure ratio and efficiency for cross-blade slot casing treatment are reduced obviously. Three kinds of new cross-blade slot casing treatment were designed according to the previous successful experience and investigated in this paper. The numerical results show that the new three cross-blade slot casing treatments both generate about 54% stall margin improvement at the cost of minor peak efficiency. For one new cross-blade slot casing treatment (CSCT2), the compressor peak efficiency is reduced by about 0.3%. The low energy TLV, which is present for cross-blade slot casing treatment, is removed by the strong sucked flow made by CSCT2. Moreover, the interaction between the mainstream and the injected flows caused by CSCT2 becomes weak obviously, and the corresponding flow loss is reduced greatly. Hence, the compressor stability and performance with CSCT2 are higher than those with cross-blade slot casing treatment.

Mechanism of affecting the performance and internal flow field of an axial flow subsonic compressor with self-recirculation casing treatment

2020 ◽  
pp. 095441002094267
Author(s):  
Hao G Zhang ◽  
Fei Y Dong ◽  
Wei Wang ◽  
Wu L Chu ◽  
Song Yan
Keyword(s):  
Flow Field ◽  
Axial Flow ◽  
Internal Flow ◽  
Leading Edge ◽  
Tip Clearance ◽  
Stall Margin ◽  
Casing Treatment ◽  
Leakage Flows ◽  
Blade Tip ◽  
Compressor Performance

This investigation aims to understand the mechanisms of affecting the axial flow compressor performance and internal flow field with the application of self-recirculation casing treatment. Besides, the potentiality of further enhancing the compressor performance and stability by optimizing the geometric structure of self-recirculation casing treatment is discussed in detail. The results show that self-recirculation casing treatment generates about 7.06, 7.89% stall margin improvements in the experiment and full-annulus unsteady calculation, respectively. Moreover, the compressor total pressure and isentropic efficiency are improved among most of operating points, and the experimental and calculated compressor peak efficiencies are increased by 0.7% and 0.6%, respectively. The comparisons between baseline shroud and self-recirculation casing treatment show that the flow conditions of the compressor rotor inlet upstream are improved well with self-recirculation casing treatment, and the degree of the pressure enhancement in the blade top passage for self-recirculation casing treatment is higher than that for baseline. Further, self-recirculation casing treatment can restrain the leading edge-spilled flows made by the blade tip clearance leakage flows and weaken the blade tip passage blockage. Hence, the flow loss near the rotor top passage is reduced after the application of self-recirculation casing treatment. The rotor performance and stability for self-recirculation casing treatment are greater than those for baseline. The flow-field analyses also indicate that the adverse effects caused by the clearance leakage flows of the blades tip rear are greater than those made by the clearance leakage flows of the blades leading edge. When one injecting part of self-recirculation casing treatment is aligned with the inlet of one blade tip passage, the flow-field quality in the passage is not the best among all the passages between two adjacent injecting parts of self-recirculation casing treatment. Further, the flow-field analyses also indicate that the effect of the relative position between the blade and self-recirculation casing treatment on the flows in the self-recirculation casing treatment may be ignored during the optimization of the recirculating loop configuration.

Parametric Study for Lossless Casing Treatment on a Mixed-Flow Compressor Rotor

2015 ◽  
Author(s):  
Noureddine Djeghri ◽  
Huu Duc Vo ◽  
Hong Yu
Keyword(s):  
Parametric Study ◽  
Numerical Study ◽  
Axial Position ◽  
Design Parameters ◽  
Skew Angle ◽  
Peak Efficiency ◽  
Mixed Flow ◽  
Stall Margin ◽  
Casing Treatment ◽  
Stall Margin Improvement

A systematic numerical study has been carried out to investigate the effects of casing treatment slots geometry and location on the stall margin and peak efficiency of an isolated mixed-flow rotor at high subsonic flow conditions. Based on the literature review for axial rotor, a semi-circular axial skewed slot casing treatment placed in the leading edge region was chosen as the starting configuration as it has the best potential of producing stall margin improvement with low peak efficiency loss. A computational parametric study was performed from this baseline casing treatment geometry to identify the most important geometrical design parameters and to arrive at a design with noticeable stall margin improvement and no loss in peak efficiency. The results show that the design parameters with the largest impact on stall margin improvement and peak efficiency are: open area ratio, slot skew angle, slot axial length and slot axial position. The slots depth and slot shape seem to have only limited influence on performance. While not yet optimized, a slot casing treatment design with significant stall margin improvement and no loss in peak efficiency was obtained. To the authors’ knowledge, this work is the most extensive slot casing treatments parametric study so far in term of number of design parameters considered.

An Experimental Investigation About the Effect of the Partial Casing Treatment on a Transonic Axial-Flow Compressor Performance Under Inlet Distortion

2012 ◽  
Author(s):  
Maoyi Li ◽  
Wei Yuan ◽  
Xizhen Song ◽  
Yajun Lu ◽  
Zhiping Li ◽  
...  
Keyword(s):  
Total Pressure ◽  
Pressure Ratio ◽  
Axial Flow ◽  
Peak Efficiency ◽  
Stall Margin ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Inlet Distortion ◽  
Flow Compressor ◽  
Total Pressure Ratio

The traditional annulus casing treatment often pays the price of lowered efficiency for improving the stall margin of a compressor under inlet distortion. In view of the unsymmetry of the inlet flow-field of compressors, partial casing treatment was used to control the flow in a transonic axial-flow compressor with arc-skewed-slots deployed at different circumferential positions under inlet distortion. The experimental results indicate that when the partial casing treatment is arranged on the undistorted and distorted sectors, the stall margin is enhanced by 8.02%, with the relative peak efficiency improved simultaneously by 2.143%, compared with the case of solid casing at 98% rotating speed. By contrast, the traditional casing treatment increases the stall-margin by 23.13%, but decreases the relative peak efficiency by 0.752%. By analyzing dynamic and static experimental data, the mechanism underlying the partial casing treatment was also studied in detail here. The disturbances of inlet flow were restrained by annulus casing treatment, nevertheless the total pressure ratio was decreased obviously in the distorted sector. As a result, the stall-margin is improved, but the relative peak efficiency is decreased too. When the partial casing treatment was arranged on the undistortded and distorted sectors, the stall disturbances was thereby restrained. So the stall margin was enhanced. In addition, the total pressure ratio was improved by the partial casing treatment in the distorted and transition sectors, and thus the relative peak efficiency was also increased markedly.

An Experimental Investigation on the Mechanism of Stall Margin Improvement of Casing Treatment

1985 ◽  
Author(s):  
Zhuang Ping ◽  
Lu Ya-Jun ◽  
Li Bao-Ju ◽  
Feng Yu-Chen
Keyword(s):  
Good Reason ◽  
Three Dimensional ◽  
Axial Flow ◽  
Rotating Stall ◽  
Flow Mechanism ◽  
Three Dimensional Flow ◽  
Stall Margin ◽  
Casing Treatment ◽  
Stall Margin Improvement ◽  
Flow Compressor

A single-rotor axial flow compressor and a two-dimensional cascade have been tested with and without casing treatment. A three-dimensional flow mechanism of the onset of rotating stall is suggested. It gives good reason to explain the mechanism of stall-margin improvement of casing treatment.

Influencing Parameters of a Tip Blowing Interacting With Rotor Tip Flow

2015 ◽  
Author(s):  
Cyril Guinet ◽  
André Inzenhofer ◽  
Volker Gümmer
Keyword(s):  
Geometric Model ◽  
Axial Compressor ◽  
Axial Flow ◽  
Axial Position ◽  
Design Parameters ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Flow Phenomena ◽  
Casing Treatments

The design space of axial-flow compressors is restricted by stability issues. Different axial-type casing treatments have shown their ability to enhance compressor stability and to influence efficiency. Casing treatments have proven to be effective, but there still is need for more detailed investigations and gain of understanding for the underlying flow mechanism. Casing treatments are known to have a multitude of effects on the near-casing 3D flow field. For transonic compressor rotors these are more complex, as super- and subsonic flow regions alternate while interacting with the casing treatment. To derive design rules it is important to quantify the influence of the casing treatment on the different tip flow phenomena. Designing a casing treatment in a way that it antagonizes only the deteriorating secondary flow effects can be seen as a method to enhance stability while increasing efficiency. The numerical studies are carried out on a tip-critical rotor of a 1.5 stage transonic axial compressor. The examined recirculating tip blowing casing treatment, which consists of a recirculating channel with an air off-take above the rotor and an injection nozzle in front of the rotor. The design and functioning of the casing treatment is influenced by various parameters. A variation of the geometry of the tip blowing, more specifically the nozzle aspect ratio, the axial position or the tangential orientation of the injection port, was carried out to identify key levers. The tip blowing casing treatment is defined as a parameterized geometric model and is automatically meshed. A sensitivity analysis of the respective design parameters of the tip blowing is carried out on a single rotor row. Their impact on overall efficiency and their ability to improve stall margin is evaluated. The study is carried out using URANS simulations.

scholarly journals Axial Flow Compressor Stability Enhancement: Circumferential T-Shape Grooves Performance Investigation

Aerospace ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 12
Author(s):  
Marco Porro ◽  
Richard Jefferson-Loveday ◽  
Ernesto Benini
Keyword(s):  
Vortex Breakdown ◽  
Pressure Ratio ◽  
Axial Flow ◽  
Suction Side ◽  
Treatment Technique ◽  
Tip Leakage Flow ◽  
Stall Inception ◽  
Stall Margin ◽  
Casing Treatment ◽  
Stall Margin Improvement

This work focuses its attention on possibilities to enhance the stability of an axial compressor using a casing treatment technique. Circumferential grooves machined into the case are considered and their performances evaluated using three-dimensional steady state computational simulations. The effects of rectangular and new T-shape grooves on NASA Rotor 37 performances are investigated, resolving in detail the flow field near the blade tip in order to understand the stall inception delay mechanism produced by the casing treatment. First, a validation of the computational model was carried out analysing a smooth wall case without grooves. The comparisons of the total pressure ratio, total temperature ratio and adiabatic efficiency profiles with experimental data highlighted the accuracy and validity of the model. Then, the results for a rectangular groove chosen as the baseline case demonstrated that the groove interacts with the tip leakage flow, weakening the vortex breakdown and reducing the separation at the blade suction side. These effects delay stall inception, improving compressor stability. New T-shape grooves were designed keeping the volume as a constant parameter and their performances were evaluated in terms of stall margin improvement and efficiency variation. All the configurations showed a common efficiency loss near the peak condition and some of them revealed a stall margin improvement with respect to the baseline. Due to their reduced depth, these new configurations are interesting because they enable the use of a thinner light-weight compressor case as is desirable in aerospace applications.

Sign in / Sign up

Export Citation Format

Share Document