scholarly journals A Better Way to Support Horizontal Pressure Vessels Subject to Thermal Loading

1997 ◽  
Author(s):  
Alwyn S. Tooth ◽  
John S. T. Cheung ◽  
Heong W. Ng ◽  
Lin S. Ong ◽  
Chithranjan Nadarajah
Keyword(s):  
High Temperature ◽  
Fatigue Life ◽  
Pressure Vessel ◽  
Thermal Loading ◽  
Thermal Stresses ◽  
Pressure Vessels ◽  
Sliding Surface ◽  
Current Design ◽  
Horizontal Pressure ◽  
Regular Site

When storing liquids at high temperature, in horizontal vessels, the current design methods aim to minimise the thermal stresses by introducing a sliding surface at the base of one of the twin saddle supports. However, regular site maintenance is required to ensure that adequate sliding is achieved This may be difficult and costly to carry out. The aim of the present work, therefore, is to dispense with the sliding support and to provide saddle designs which although fixed to the platform, or foundation, do not result in the storage/pressure vessel being over-stressed when thermal loading occurs. The paper provides general recommendations for the most appropriate saddle geometries, and details the way in which ‘Design by Analysis’ and ‘Fatigue Life Assessments’ may be carried out using the stresses which arise from these designs.

scholarly journals Effect of Head Types on the Free Vibration and Fatigue for Horizontal LPG Pressure Vessels

2018 ◽  
Vol 21 (4) ◽  
pp. 494-500
Author(s):  
Marwan Abdulrazzaq Salman ◽  
Mahmud Rasheed Ismail ◽  
Yassr Y. Kahtan
Keyword(s):  
Fatigue Life ◽  
Pressure Vessel ◽  
Natural Frequencies ◽  
Pressure Vessels ◽  
Mode Shapes ◽  
Liquefied Petroleum Gas ◽  
Oil Refineries ◽  
Periodic Loading ◽  
Spherical Head ◽  
Horizontal Pressure

Pressure vessels are the heart of plants and oil refineries stations. In many engineering applications such vessels can be subjected to periodic loading either internally due to the charging and discharging process or externally due to the excitation from other nearby components such as pumps, compressors or from seismic. So that in spite of a good design according static assumption it may be critical in dynamics. In this work a horizontal pressure vessel with accessories subjected to liquefied petroleum gas pressure LPG is considered. Three models of different head types are investigated herein namely; Deep torispherical, Elliptical 2:1 and Hemispherical. The design and material selections are chosen as per ASME. For practical service many accessories are attached to the vessel such as manhole, supports, inlet and outlet opining. Finite Element method via ANSYS R18.2 is introduced for the numerical analysis. The fatigue life in case of fully reversed cyclic loading are estimated and located. Vibration characteristics such as mode shapes and natural frequencies for the lowest five modes are evaluated and compared. It is found that the fatigue life can be increased as higher as 180% for hemi- spherical head as compared with deep torispherical head pressure vessel and the lowest four natural frequencies are nearly identical for all models, however significant change observed in the fifth natural frequency.

Effect of Carbide Content on Temper Embrittlement of 2.25Cr1Mo Steel

2016 ◽  
Author(s):  
Yian Wang ◽  
Guoshan Xie ◽  
Zheng Zhang ◽  
Xiaolong Qian ◽  
Yufeng Zhou ◽  
...  
Keyword(s):  
High Temperature ◽  
Pressure Vessel ◽  
High Stress ◽  
Temper Embrittlement ◽  
Damage Mechanism ◽  
Pressure Vessels ◽  
Nondestructive Method ◽  
Operating Conditions ◽  
Low Alloy Steels ◽  
Carbide Content

Temper embrittlement is a common damage mechanism of pressure vessels in the chemical and petrochemical industry serviced in high temperature, which results in the reduction of roughness due to metallurgical change in some low alloy steels. Pressure vessels that are temper embrittled may be susceptible to brittle fracture under certain operating conditions which cause high stress by thermal gradients, e.g., during start-up and shutdown. 2.25Cr1-Mo steel is widely used to make hydrogenation reactor due to its superior combination of high mechanical strength, good weldability, excellent high temperature hydrogen attack (HTHA) and oxidation-resistance. However, 2.25Cr-1Mo steel is particularly susceptible to temper embrittlement. In this paper, the effect of carbide on temper embrittlement of 2.25Cr-1Mo steel was investigated. Mechanical properties and the ductile-brittle transition temperature (DBTT) of 2.25Cr-1Mo steel were measured by tensile test and impact test. The tests were performed at two positions (base metal and weld metal) and three states (original, step cooling treated and in-service for a hundred thousand hours). The content and distribution of carbides were analyzed by scanning electron microscope (SEM). The content of Cr and Mo elements in carbide was measured by energy dispersive X-ray analysis (EDS). The results showed that the embrittlement could increase the strength and reduce the plasticity. Higher carbide contents appear to be responsible for the higher DBTT. The in-service 2.25Cr-1Mo steel showed the highest DBTT and carbide content, followed by step cooling treated 2.25Cr-1Mo steel, while the as-received 2.25Cr-1Mo steel has the minimum DBTT and carbide content. At the same time, the Cr and Mo contents in carbide increased with the increasing of DBTT. It is well known that the specimen analyzed by SEM is very small in size, sampling SEM specimen is convenient and nondestructive to pressure vessel. Therefore, the relationship between DBTT and the content of carbide offers a feasible nondestructive method for quantitative measuring the temper embrittlement of 2.25Cr-1Mo steel pressure vessel.

A Study on Fatigue Life Evaluation of Pressure Vessel Made of ASME SA240-316L Material Using Numerical Analysis

2019 ◽  
Vol 893 ◽  
pp. 1-5 ◽  
Author(s):  
Eui Soo Kim
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Pressure Vessel ◽  
Life Prediction ◽  
Pressure Vessels ◽  
Physical Damage ◽  
Element Analysis ◽  
Internal Damage ◽  
Life Evaluation ◽  
Fatigue Life Evaluation

Pressure vessels are subjected to repeated loads during use and charging, which can causefine physical damage even in the elastic region. If the load is repeated under stress conditions belowthe yield strength, internal damage accumulates. Fatigue life evaluation of the structure of thepressure vessel using finite element analysis (FEA) is used to evaluate the life cycle of the structuraldesign based on finite element method (FEM) technology. This technique is more advanced thanfatigue life prediction that uses relational equations. This study describes fatigue analysis to predictthe fatigue life of a pressure vessel using stress data obtained from FEA. The life prediction results areuseful for improving the component design at a very early development stage. The fatigue life of thepressure vessel is calculated for each node on the model, and cumulative damage theory is used tocalculate the fatigue life. Then, the fatigue life is calculated from this information using the FEanalysis software ADINA and the fatigue life calculation program WINLIFE.

An alternative way to support horizontal pressure vessels subject to thermal loading

1998 ◽  
Vol 75 (8) ◽  
pp. 617-623 ◽  
Author(s):  
Alwyn S. Tooth ◽  
John S.T. Cheung ◽  
Heong W. Ng ◽  
Lin S. Ong ◽  
Chithranjan Nadarajah
Keyword(s):  
Thermal Loading ◽  
Pressure Vessels ◽  
Horizontal Pressure

A Study of Nozzles in Pressure Vessels under Pressure Fatigue Loading

1967 ◽  
Vol 182 (1) ◽  
pp. 657-684 ◽  
Author(s):  
J. Spence ◽  
W. B. Carlson
Keyword(s):  
Fatigue Life ◽  
Mild Steel ◽  
Pressure Vessel ◽  
Special Interest ◽  
Maximum Stress ◽  
Fatigue Loading ◽  
Fatigue Tests ◽  
Pressure Vessels ◽  
Full Size

Nozzles in cylindrical vessels have been of special interest to designers for some time and have offered a field of activity for many research workers. This paper presents some static and fatigue tests on five designs of full size pressure vessel nozzles manufactured in two materials. Supporting and other published work is reviewed showing that on the basis of the same maximum stress mild steel vessels give the same fatigue life as low alloy vessels. When compared on the basis of current codes it is shown that mild steel vessels may have five to ten times the fatigue life of low alloy vessels unless special precautions are taken.

Kendall Analysis of Cannon Pressure Vessels

2012 ◽  
Author(s):  
John H. Underwood
Keyword(s):  
Fatigue Life ◽  
Yield Strength ◽  
Pressure Vessel ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Full Scale ◽  
Compressive Yield Strength ◽  
Us Army ◽  
Post Test ◽  
Engineering Mechanics

Engineering mechanics analysis of cannon pressure vessels is described with special emphasis on the work of the late US Army Benet Laboratories engineer David P. Kendall. His work encompassed a broad range of design and analysis of high pressure vessels for use as cannons, including analysis of the limiting yield pressure for vessels, the autofrettage process applied to thick vessels, and the fatigue life of autofrettaged cannon vessels. Mr. Kendall’s work has become the standard approach used to analyze the structural integrity of cannon pressure vessels at the US Army Benet Laboratories. The methods used by Kendall in analysis of pressure vessels were simple and direct. He used classic results from research in engineering mechanics to develop descriptive expressions for limiting pressure, autofrettage residual stresses and fatigue life of cannon pressure vessels. Then he checked the expressions against the results of full-scale cannon pressure vessel tests in the proving grounds and the laboratory. Three types of analysis are described: [i] Yield pressure tests of cannon sections compared with a yield pressure expression, including in the comparison post-test yield strength measurements from appropriate locations of the cannon sections; [ii] Autofrettage hoop residual stress measurements by neutron diffraction in cannon sections compared with expressions, including Bauschinger corrections in the expressions to account for the reduction in compressive yield strength near the bore of an autofrettaged vessel; [iii] Fatigue life tests of cannons following proving ground firing and subsequent laboratory simulated firing compared with Paris-based fatigue life expressions that include post-test metallographic determination of the initial crack size due to firing. Procedures are proposed for Paris life calculations for bore-initiated fatigue affected by crack-face pressure and notch-initiated cracking in which notch tip stresses are significantly above the material yield strength. The expressions developed by Kendall and compared with full-scale cannon pressure vessel tests provide useful first-order design and safety checks for pressure vessels, to be followed by further engineering analysis and service simulation testing as appropriate for the application. Expressions are summarized that are intended for initial design calculations of yield pressure, autofrettage stresses and fatigue life for pressure vessels. Example calculations with these expressions are described for a hypothetical pressure vessel.

Support Analysis of Horizontal Pressure Vessel Using FEA

2014 ◽  
Vol 592-594 ◽  
pp. 1220-1224
Author(s):  
Navin Kumar ◽  
Surjit Angra ◽  
Vinod Kumar Mittal
Keyword(s):  
Stress Analysis ◽  
Pressure Vessel ◽  
Theoretical Basis ◽  
Pressure Vessels ◽  
Loading Conditions ◽  
Ansys Software ◽  
Support Design ◽  
Horizontal Pressure ◽  
The Given

Saddles are used to support the horizontal pressure vessels such as boiler drums or tanks. Since saddle is an integral part of the vessel, it should be designed in such a way that it can withstand the pressure vessel load while carrying liquid along with the operating weight. This paper presents the stress analysis of saddle support of a horizontal pressure vessel. A model of horizontal pressure vessel and saddle is created in Ansys software. For the given boundry and loading conditions, stresses induced in the saddle support are analyzed using Ansys software. After analysis it is found that maximum localized stress arises at the saddle to vessel interface near the saddle horn area. The results obtained shows that the saddle support design is safe for the given loading conditions and provides the theoretical basis for furthur optimisation.

An Empirical Life Prediction Method of Cold-Stretched Austenitic Stainless Steel

2016 ◽  
Vol 853 ◽  
pp. 67-71
Author(s):  
Yu Han ◽  
Ke Sheng Wang
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Fatigue Life ◽  
Austenitic Stainless Steel ◽  
Prediction Model ◽  
Test Data ◽  
Life Prediction ◽  
Pressure Vessels ◽  
Fatigue Life Prediction ◽  
Life Prediction Model

With the purpose of long-cycle safe operation of cold stretched austenitic stainless steel pressure vessels so as to achieve unification of economy and safety, prediction of fatigue life of S31603 austenitic stainless steel at high temperature is systematic studied. Based on the Hull-Rimmer cavity theory, a fatigue life prediction model applicable to stress controlled is developed. Fatigue test is carried out on the solution annealed and cold stretched S31603 steel at high temperature and corresponding test data is obtained. The fatigue life of the solution annealed and cold stretched materials is predicted by the model and the prediction results are in good agreement with the experimental results. On this basis, the life prediction model coupled with the strain level of cold stretching is further established. Compared with the test data, the prediction results is found to be very satisfactory with an error band less than ±1.5 times. The fatigue life prediction model suitable for stress control at high temperature is simple in form and has a clear and obvious physical significance which points out a new way to predict fatigue life of metal materials.

Fatigue Life of Commercial High Pressure Tubing

2002 ◽  
Author(s):  
Michael D. Mann
Keyword(s):  
High Pressure ◽  
Fatigue Life ◽  
Pressure Vessel ◽  
Pressure Vessels ◽  
Thick Wall ◽  
Pressure Tubing ◽  
Safety And Reliability ◽  
Section Viii ◽  
Critical Components ◽  
Axial Fatigue

Design guidance for high pressure components, has undergone a dramatic change with the release of ASME Section VIII division 3 pressure vessel code. For the first time, a thorough design criteria is available for design of thick wall pressure vessels. The most critical components of a design are safety and reliability. Ultra high-pressure vessels, in most cases, do not have an “infinite” life. The design must therefore be “leak before break” and a design cycle life must be specified. This paper looks at the effects of fatigue on commercial high-pressure tubing under tri-axial fatigue. The tubing investigated is 316 stainless steel 9/16″ and 3/8″ diameter 4100 bar (60,000 psi) tubing. The testing was performed using a tri-axial fatigue machine originally designed by Dr. B. Crossland, Dr. J. L. M. Morrison and Dr. J. S. C. Perry in 1960 and upgraded by the Author. This investigation compares the fatigue life prediction per KD3 in the ASME pressure vessel code Section VIII division 3 and actual test results from the fatigue machine. This verification gives important reliability data for commercial hardware used in high-pressure piping.

Paris Fatigue Life Modeling of Pressure Vessel Service Simulation Tests

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
John H. Underwood ◽  
John J. Keating ◽  
Edward Troiano ◽  
Gregory N. Vigilante
Keyword(s):  
Fatigue Life ◽  
Residual Stresses ◽  
Pressure Vessel ◽  
Base Alloy ◽  
Pressure Vessels ◽  
Full Scale ◽  
Test Results ◽  
X Ray Diffraction ◽  
Life Model ◽  
Nickel Base

Results from four groups of full-scale pressure vessel service simulation tests are described and analyzed using Paris fatigue life modeling. The objective is to determine how the vessel and initial crack configurations and applied and residual stresses control the as-tested fatigue life of the vessel. The tube inner radii are in the 40–80 mm range; wall thickness varies from 6 to 80 mm; materials are ASTM A723 pressure vessel steel and IN718 nickel-base alloy; applied internal pressure varies from 90 to 700 MPa. The Paris constant, C, and exponent, m, that describe the fatigue crack propagation rate versus stress intensity factor range for the various vessel materials, were measured as part of the investigation. Extensive, previously published fatigue life results from baseline A723 pressure vessels with well characterized autofrettage residual stresses and C and m values are used to demonstrate that a Paris fatigue life model gives a good description of the measured life. The same model is then used to determine the variables with predominant control over life in three types of pressure vessel for which less information and tests results are available. A design life for pressure vessels is calculated for a specified very low probability of fatigue failure using the log(N)-normal distribution statistics often used for fatigue of structures. The results of the work showed: (i) X-ray diffraction measurements of through-wall autofrettage residual stresses are in excellent agreement with prior neutron diffraction measurements from a baseline autofrettaged A723 pressure vessel; these verified autofrettage residual stresses then provide critical input to the baseline Paris life modeling; (ii) comparison of the various full-scale fatigue test results with results from the Paris fatigue life model shows close agreement when autofrettage residual stresses are incorporated into models; (iii) model results for A723 steel vessels with yield strength reduced from the initial 1400 MPa value and degree of autofrettage increased from the initial 40% value indicates a significantly improved resistance to brittle failure with no loss of fatigue life; (iv] comparison of model fatigue life results for IN718 nickel-base alloy vessels with their full-scale test results is improved when near-bore residual stresses measured by X-ray diffraction are included in the model calculations.

Sign in / Sign up

Export Citation Format

Share Document