The Global Motion of a Rigid Body Subject to Periodic Body-Fixed Torques

1995 ◽  
Author(s):  
X. Tong ◽  
B. Tabarrok
Keyword(s):  
Rigid Body ◽  
Equations Of Motion ◽  
Melnikov Method ◽  
The Body ◽  
Body Motion ◽  
Heteroclinic Orbits ◽  
Coordinate Frame ◽  
Global Motion ◽  
Stable And Unstable Manifolds ◽  
Body Subject

Abstract In this paper the global motion of a rigid body subject to small periodic torques, which has a fixed direction in the body-fixed coordinate frame, is investigated by means of Melnikov’s method. Deprit’s variables are introduced to transform the equations of motion into a form describing a slowly varying oscillator. Then the Melnikov method developed for the slowly varying oscillator is used to predict the transversal intersections of stable and unstable manifolds for the perturbed rigid body motion. It is shown that there exist transversal intersections of heteroclinic orbits for certain ranges of parameter values.

scholarly journals An Efficient Modelling of Flexible Airships

2006 ◽  
Author(s):  
Selima Bennaceur ◽  
Naoufel Azouz ◽  
Djaber Boukraa
Keyword(s):  
Rigid Body ◽  
Equations Of Motion ◽  
General System ◽  
Rigid Body Motion ◽  
The Body ◽  
Body Motion ◽  
Modal Synthesis ◽  
Stiffness Matrices ◽  
Updated Lagrangian ◽  
Convenient Technique

This paper presents an efficient modelling of airships with small deformations moving in an ideal fluid. The formalism is based on the Updated Lagrangian Method (U.L.M.). This formalism proposes to take into account the coupling between the rigid body motion and the deformation as well as the interaction with the surrounding fluid. The resolution of the equations of motion is incremental. The behaviour of the airship is defined relatively to a virtual non-deformed reference configuration moving with the body. The flexibility is represented by a deformation modes issued from a Finite Elements Method analysis. The increment of rigid body motion is represented similarly by rigid modes. A modal synthesis is used to solve the general system equations of motion. Time constant matrices appears (i.e. mass and structural stiffness matrices), and we show a convenient technique to actualise the time dependant matrices.

Modelling lateral manoeuvres in fish

2012 ◽  
Vol 697 ◽  
pp. 1-34 ◽  
Author(s):  
K. Singh ◽  
T. J. Pedley
Keyword(s):  
Rigid Body ◽  
Equations Of Motion ◽  
Rigid Body Dynamics ◽  
The Body ◽  
Body Motion ◽  
Dynamic State ◽  
Parameter Study ◽  
Element Formulation ◽  
Turn Angle ◽  
Impulsive Input

AbstractWe propose a method to model manoeuvres in self-propelled flexible-bodied fish by modelling the hydrodynamics coupled to the body inertia. Flexible body motion is prescribed and the equations of motion are solved for the position of the centre of mass and rotation of the body. The governing equations are formulated by applying the conservation of linear and angular momentum. Two independent methods to model the fluid dynamics are pursued: Model 1 is an extension of elongated-body theory, modified for self-propulsion and flexible motion. Model 2 applies a numerical boundary-element formulation with the fish modelled as an infinitely thin rectangular body. The manoeuvring response to an impulsive input is first examined to understand the rigid-body characteristics of the fish. A flexible bend action is included to model C-bends of the type observed during escapes in fish. Models 1 and 2 are used to cross-verify the respective implementations as well as to develop physical insights into manoeuvring. A parameter study shows that fish of intermediate body depths are best adapted to rapid turns whereas the initial dynamic state of the fish is instrumental in affecting the sign as well as the magnitude of the turn angle, for a prescribed bend deflection. Computations for combined swimming and turning show that the initial rigid-body dynamics of the fish is much more effective than the induced effect of the prior shed wake in enhancing the turning response.

scholarly journals The equations of motion for a rigid body using non-redundant unified local velocity coordinates

2019 ◽  
Vol 48 (3) ◽  
pp. 283-309 ◽  
Author(s):  
Stefan Holzinger ◽  
Joachim Schöberl ◽  
Johannes Gerstmayr
Keyword(s):  
Rigid Body ◽  
Equations Of Motion ◽  
Motion Vector ◽  
The Body ◽  
Body Motion ◽  
Integration Scheme ◽  
Exponential Map ◽  
Local Velocity ◽  
Translational Velocity ◽  
Angular Velocity Vector

Abstract A novel formulation for the description of spatial rigid body motion using six non-redundant, homogeneous local velocity coordinates is presented. In contrast to common practice, the formulation proposed here does not distinguish between a translational and rotational motion in the sense that only translational velocity coordinates are used to describe the spatial motion of a rigid body. We obtain these new velocity coordinates by using the body-fixed translational velocity vectors of six properly selected points on the rigid body. These vectors are projected into six local directions and thus give six scalar velocities. Importantly, the equations of motion are derived without the aid of the rotation matrix or the angular velocity vector. The position coordinates and orientation of the body are obtained using the exponential map on the special Euclidean group $\mathit{SE}(3)$SE(3). Furthermore, we introduce the appropriate inverse tangent operator on $\mathit{SE}(3)$SE(3) in order to be able to solve the incremental motion vector differential equation. In addition, we present a modified version of a recently introduced a fourth-order Runge–Kutta Lie-group time integration scheme such that it can be used directly in our formulation. To demonstrate the applicability of our approach, we simulate the unstable rotation of a rigid body.

MULTIBODY DYNAMIC MODELING AND FLUTTER ANALYSIS OF A FLEXIBLE SLENDER VEHICLE

2012 ◽  
Vol 12 (06) ◽  
pp. 1250049 ◽  
Author(s):  
A. RASTI ◽  
S. A. FAZELZADEH
Keyword(s):  
Differential Equations ◽  
Rigid Body ◽  
Dynamic Modeling ◽  
Equations Of Motion ◽  
The Body ◽  
Elastic Deformations ◽  
Strip Theory ◽  
Multibody Dynamic ◽  
Flutter Analysis ◽  
Rigid Body Motions

In this paper, multibody dynamic modeling and flutter analysis of a flexible slender vehicle are investigated. The method is a comprehensive procedure based on the hybrid equations of motion in terms of quasi-coordinates. The equations consist of ordinary differential equations for the rigid body motions of the vehicle and partial differential equations for the elastic deformations of the flexible components of the vehicle. These equations are naturally nonlinear, but to avoid high nonlinearity of equations the elastic displacements are assumed to be small so that the equations of motion can be linearized. For the aeroelastic analysis a perturbation approach is used, by which the problem is divided into a nonlinear flight dynamics problem for quasi-rigid flight vehicle and a linear extended aeroelasticity problem for the elastic deformations and perturbations in the rigid body motions. In this manner, the trim values that are obtained from the first problem are used as an input to the second problem. The body of the vehicle is modeled with a uniform free–free beam and the aeroelastic forces are derived from the strip theory. The effect of some crucial geometric and physical parameters and the acting forces on the flutter speed and frequency of the vehicle are investigated.

Seismic Analysis of Structures With Coulomb Friction

1983 ◽  
Vol 105 (2) ◽  
pp. 171-178 ◽  
Author(s):  
V. N. Shah ◽  
C. B. Gilmore
Keyword(s):  
Rigid Body ◽  
Coulomb Friction ◽  
Seismic Event ◽  
Seismic Analysis ◽  
Equations Of Motion ◽  
Relative Displacement ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Superposition Method ◽  
Modal Superposition Method

A modal superposition method for the dynamic analysis of a structure with Coulomb friction is presented. The finite element method is used to derive the equations of motion, and the nonlinearities due to friction are represented by pseudo-force vector. A structure standing freely on the ground may slide during a seismic event. The relative displacement response may be divided into two parts: elastic deformation and rigid body motion. The presence of rigid body motion necessitates the inclusion of the higher modes in the transient analysis. Three single degree-of-freedom problems are solved to verify this method. In a fourth problem, the dynamic response of a platform standing freely on the ground is analyzed during a seismic event.

scholarly journals The Dynamical Behavior of a Rigid Body Relative Equilibrium Position

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
T. S. Amer
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
Numerical Solutions ◽  
Equations Of Motion ◽  
Relative Equilibrium ◽  
Dynamical Behavior ◽  
Vertical Plane ◽  
The Body ◽  
Physical Parameters ◽  
Pendulum Model

In this paper, we will focus on the dynamical behavior of a rigid body suspended on an elastic spring as a pendulum model with three degrees of freedom. It is assumed that the body moves in a rotating vertical plane uniformly with an arbitrary angular velocity. The relative periodic motions of this model are considered. The governing equations of motion are obtained using Lagrange’s equations and represent a nonlinear system of second-order differential equations that can be solved in terms of generalized coordinates. The numerical solutions are investigated using the fourth-order Runge-Kutta algorithms through Matlab packages. These solutions are represented graphically in order to describe and discuss the behavior of the body at any instant for different values of the physical parameters of the body. The obtained results have been discussed and compared with some previous published works. Some concluding remarks have been presented at the end of this work. The importance of this work is due to its numerous applications in life such as the vibrations that occur in buildings and structures.

The Dynamics of a Deformable Body Experiencing Large Displacements

1988 ◽  
Vol 55 (3) ◽  
pp. 676-680 ◽  
Author(s):  
W. P. Koppens ◽  
A. A. H. J. Sauren ◽  
F. E. Veldpaus ◽  
D. H. van Campen
Keyword(s):  
Rigid Body ◽  
Mass Matrix ◽  
Deformable Body ◽  
Equations Of Motion ◽  
Body Motion ◽  
General Description ◽  
Large Displacements ◽  
Displacement Fields ◽  
Cpu Time ◽  
Time Savings

A general description of the dynamics of a deformable body experiencing large displacements is presented. These displacements are resolved into displacements due to deformation and displacements due to rigid body motion. The former are approximated with a linear combination of assumed displacement fields. D’Alembert’s principle is used to derive the equations of motion. For this purpose, the rigid body displacements and the displacements due to deformation have to be independent. Commonly employed conditions for achieving this are reviewed. It is shown that some conditions lead to considerably simpler equations of motion and a sparser mass matrix, resulting in CPU time savings when used in a multibody program. This is illustrated with a uniform beam and a crank-slider mechanism.

Analytical Solutions for a Spinning Rigid Body Subject to Time-Varying Body-Fixed Torques, Part I: Constant Axial Torque

1993 ◽  
Vol 60 (4) ◽  
pp. 970-975 ◽  
Author(s):  
J. M. Longuski ◽  
P. Tsiotras
Keyword(s):  
Rigid Body ◽  
Equations Of Motion ◽  
Analytic Solutions ◽  
Axisymmetric Body ◽  
Attitude Motion ◽  
Time Varying ◽  
Torque Vector ◽  
Constant Torque ◽  
Symmetric Rigid Body ◽  
Body Subject

Analytic solutions are derived for the general attitude motion of a near-symmetric rigid body subject to time-varying torques in terms of certain integrals. A methodology is presented for evaluating these integrals in closed form. We consider the case of constant torque about the spin axis and of transverse torques expressed in terms of polynomial functions of time. For an axisymmetric body with constant axial torque, the resulting solutions of Euler’s equations of motion are exact. The analytic solutions for the Eulerian angles are approximate owing to a small angle assumption, but these apply to a wide variety of practical problems. The case when all three components of the external torque vector vary simultaneously with time is much more difficult and is treated in Part II.

scholarly journals Equivalence of Euler equations and torque-angular momentum relation

2021 ◽  
Vol 18 (1) ◽  
pp. 136
Author(s):  
V. Tanriverdi
Keyword(s):  
Angular Momentum ◽  
Rigid Body ◽  
Reference Frame ◽  
Euler Equations ◽  
Equations Of Motion ◽  
The Body ◽  
Moments Of Inertia ◽  
Body Reference ◽  
Stationary Reference Frame ◽  
Momentum Relation

Euler derived equations for rigid body rotations in the body reference frame and in the stationary reference frame by considering an infinitesimal part of the rigid body.Another derivation is possible, and it is widely used: transforming torque-angular momentum relation to the body reference frame.However, their equivalence is not shown explicitly.In this work, for a rigid body with different moments of inertia, we calculated Euler equations explicitly in the body reference frame and in the stationary reference frame and torque-angular momentum relation.We also calculated equations of motion from Lagrangian.These calculations show that all four of them are equivalent.

Evolution of Rotations of a Rigid Body Under the Action of Restoring and Control Moments

2005 ◽  
Author(s):  
L. D. Akulenko ◽  
D. D. Leshchenko ◽  
T. A. Kozachenko
Keyword(s):  
Rigid Body ◽  
Equations Of Motion ◽  
The Body ◽  
System Of Equations ◽  
Slow Time ◽  
Case Examples ◽  
First Approximation ◽  
Nutation Angle ◽  
Regular Precession ◽  
And Control

Perturbed rotations of a rigid body close to the regular precession in the Lagrangian case under the action of a restoring moment depending on slow time and nutation angle, as well as a perturbing moment slowly varying with time, are studied. The body is assumed to spin rapidly, and the restoring and perturbing moments are assumed to be small with a certain hierarchy of smallness of the components. A first approximation averaged system of equations of motion for an essentially nonlinear two-frequency system is obtained in the nonresonance case. Examples of motion of a body under the action of particular restoring, perturbing, and control moments of force are considered.

Sign in / Sign up

Export Citation Format

Share Document