Experimental Identification of a Fractional Derivative Linear Model for Viscoelastic Materials

2005 ◽  
Author(s):  
Giuseppe Catania ◽  
Silvio Sorrentino
Keyword(s):  
Frequency Response ◽  
Differential Operators ◽  
Equations Of Motion ◽  
Viscoelastic Model ◽  
Frequency Domain Method ◽  
Stress Strain ◽  
General Technique ◽  
Integer Order ◽  
Experimental Identification ◽  
Linear Viscoelastic

Non integer, fractional order derivative rheological models are known to be very effective in describing the linear viscoelastic dynamic behaviour of mechanical structures made of polymers [1]. The application of fractional calculus to viscoelasticity can be physically consistent [2][3][4] and the resulting non integer order differential stress-strain constitutive relation provides good curve fitting properties, requires only a few parameters and leads to causal behaviour [5]. When using such models the solution of direct problems, i.e. the evaluation of time or frequency response from a known excitation can still be obtained from the equations of motion using standard tools such as modal analysis [6]. But regarding the inverse problem, i.e. the identification from measured input-output vibrations, no general technique has so far been established, since the current methods do not seem to easily work with differential operators of non integer order. In this paper a frequency domain method is proposed for the experimental identification of a linear viscoelastic model, namely the Fractional Zener also known as Fractional Standard Linear Solid [5], to compute the frequency dependent complex stress-strain relationship parameters related to the material. The procedure is first checked with respect to numerically generated frequency response functions for testing its accuracy, and then to experimental inertance data from a free-free homogeneous beam made of High Density Polyethylene (HDPE) in plane flexural and axial vibration.

A Comparison Between Fractional-Order and Integer-Order Differential Finite Deformation Viscoelastic Models: Effects of Filler Content and Loading Rate on Material Parameters

2018 ◽  
Vol 10 (09) ◽  
pp. 1850099 ◽  
Author(s):  
Hesam Khajehsaeid
Keyword(s):  
Fractional Order ◽  
Differential Operators ◽  
Filler Content ◽  
Viscoelastic Model ◽  
Constitutive Models ◽  
Viscoelastic Behavior ◽  
Fractional Model ◽  
Material Parameters ◽  
Integer Order ◽  
Viscoelastic Models

Elastomers or rubber-like materials exhibit nonlinear viscoelastic behavior such as creep and relaxation upon mechanical loading. Differential constitutive models and hereditary integrals are the main frameworks followed in the literature for modeling the viscoelastic behavior at finite deformations. Regular differential operators can be replaced by fractional-order derivatives in the standard models in order to make fractional viscoelastic models. In the present paper, the relaxation behavior of elastomers is formulated both in terms of ordinary (integer-order) and fractional differential viscoelastic models. The derived constitutive equations are fitted to several experimental data to compare their efficiency in modeling the stress relaxation phenomenon. Specifically, a fractional viscoelastic model with one fractional dashpot (FD) is compared with two ordinary models including respectively one and two ordinary dashpots (OD). The models are compared in fitting accuracy, number of required material parameters and also variation of parameters from one compound to another to clarify the effects of filler content and deformation rate. It is shown that, the results of the ordinary model with one OD is not good at all. The fractional model with one FD and the ordinary model with two ODs provide good fittings for all compounds whereas the former uses only three parameters and the latter uses five material parameters. For the fractional model, the order of the Maxwell element and the associated relaxation time approximately remain the same for different compounds of each material at certain loading rates, but it is not the case for the ordinary differential models.

Dynamic response of the isolated passive rat diaphragm strip

1992 ◽  
Vol 73 (6) ◽  
pp. 2681-2692 ◽  
Author(s):  
D. Navajas ◽  
S. Mijailovich ◽  
G. M. Glass ◽  
D. Stamenovic ◽  
J. J. Fredberg
Keyword(s):  
Dynamic Response ◽  
Plastic Material ◽  
Viscoelastic Model ◽  
Nonlinear Behavior ◽  
Step Response ◽  
Stress Adaptation ◽  
Amplitude Dependence ◽  
Rat Diaphragm ◽  
Stress Strain ◽  
Linear Viscoelastic

To further our understanding of the mechanisms underlying chest wall mechanics, we investigated the dynamic response of the isolated passive rat diaphragm strip. Stress adaptation of the tissue was measured from 0.05 to 60 s after subjecting the strips to strain steps of normalized strain amplitudes from 0.005 to 0.04. The tissue resistance (R), elastance (E), and hysteresivity (eta) were measured in the same range of amplitudes by sinusoidally straining the strip at frequencies from 0.03125 to 10 Hz. The stress (T) depended exponentially on the strain (epsilon) and relaxed and recovered linearly with the logarithm of time. E increased linearly with the logarithm of frequency and decreased with increasing amplitude. R fell hyperbolically with frequency and showed an amplitude dependence similar to that of E. To interpret the strong nonlinear behavior, we extended the viscoelastic model of Hildebrandt (J. Appl. Physiol. 28: 365–372, 1970) to include an exponential stress-strain relationship. Accordingly, the step response was described by T - Tr = Tr(e alpha delta epsilon - 1)(1 - gamma log t), where delta epsilon is the strain amplitude, Tr is the initial operating stress, alpha is a measure of the stress-strain nonlinearity, and gamma is the rate of stress adaptation. The oscillatory response of the model was computed by applying Fung's quasi-linear viscoelastic theory. This quasi-linear viscoelastic model fitted the step and oscillatory data fairly well but only if alpha depended negatively on delta epsilon, as might be expected in a plastic material.

Application of a Viscoelastic Model for Polyester Mooring

2010 ◽  
Author(s):  
J. W. Kim ◽  
J. H. Kyoung ◽  
A. Sablok
Keyword(s):  
Material Properties ◽  
Viscoelastic Model ◽  
Practical Method ◽  
Time Dependent ◽  
Mooring Line ◽  
New Model ◽  
Global Performance ◽  
Excitation Period ◽  
Linear Viscoelastic ◽  
Floating Platforms

A new practical method to simulate time-dependent material properties of polyester mooring line is proposed. The time-dependent material properties of polyester rope are modeled with a standard linear solid (SLS) model, which is one of the simplest forms of a linear viscoelastic model. The viscoelastic model simulates most of the mechanical properties of polyester rope such as creep, strain-stress hysteresis and excitation period-dependent stiffness. The strain rate-stress relation of the SLS model has been re-formulated to a stretch-tension relation, which is more suitable for implementation into global performance and mooring analyses tools for floating platforms. The new model has been implemented to a time-domain global performance analysis software and applied to simulate motion of a spar platform with chain-polyester-chain mooring system. The new model provides accurate platform offset without any approximation on the mean environmental load and can simulate the transient effect due to the loss of a mooring line during storm conditions, which has not been possible to simulate using existing dual-stiffness models.

A non-linear viscoelastic model with structure-dependent relaxation times

1976 ◽  
Vol 1 (2) ◽  
pp. 147-157 ◽  
Author(s):  
D. Acierno ◽  
F.P. La Mantia ◽  
G. Marrucci ◽  
G. Rizzo ◽  
G. Titomanlio
Keyword(s):  
Relaxation Times ◽  
Viscoelastic Model ◽  
Non Linear ◽  
Linear Viscoelastic ◽  
Linear Viscoelastic Model

STRESS RELAXATION OF MAGNETORHEOLOGICAL FLUIDS

2002 ◽  
Vol 16 (17n18) ◽  
pp. 2655-2661
Author(s):  
W. H. LI ◽  
G. CHEN ◽  
S. H. YEO ◽  
H. DU
Keyword(s):  
Stress Relaxation ◽  
Viscoelastic Model ◽  
Relaxation Modulus ◽  
Damping Function ◽  
Mr Fluids ◽  
Large Step ◽  
Linear Viscoelastic ◽  
Predicted Values ◽  
Two Parameters ◽  
Step Strain

In this paper, the experimental and modeling study and analysis of the stress relaxation characteristics of magnetorheological (MR) fluids under step shear are presented. The experiments are carried out using a rheometer with parallel-plate geometry. The applied strain varies from 0.01% to 100%, covering both the pre-yield and post-yield regimes. The effects of step strain, field strength, and temperature on the stress modulus are addressed. For small step strain ranges, the stress relaxation modulus G(t,γ) is independent of step strain, where MR fluids behave as linear viscoelastic solids. For large step strain ranges, the stress relaxation modulus decreases gradually with increasing step strain. Morever, the stress relaxation modulus G(t,γ) was found to obey time-strain factorability. That is, G(t,γ) can be represented as the product of a linear stress relaxation G(t) and a strain-dependent damping function h(γ). The linear stress relaxation modulus is represented as a three-parameter solid viscoelastic model, and the damping function h(γ) has a sigmoidal form with two parameters. The comparison between the experimental results and the model-predicted values indicates that this model can accurately describe the relaxation behavior of MR fluids under step strains.

On the Frequency Response of a Spinning Disk With Large Deformations

2010 ◽  
Author(s):  
Ramin M. H. Khorasany ◽  
Stanley G. Hutton
Keyword(s):  
Frequency Response ◽  
Plate Theory ◽  
Equations Of Motion ◽  
Rotating Disk ◽  
Nonlinear Frequency ◽  
Response Characteristics ◽  
Geometrical Nonlinear ◽  
Oscillation Frequencies ◽  
Multi Mode ◽  
Different Levels

In this paper, the effect of geometrical nonlinear terms, caused by a space fixed point force, on the frequencies of oscillations of a rotating disk with clamped-free boundary conditions is investigated. The nonlinear geometrical equations of motion are based on Von Karman plate theory. Using the eigenfunctions of a stationary disk as approximating functions in Galerkin’s method, the equations of motion are transformed into a set of coupled nonlinear Ordinary Differential Equations (ODEs). These equations are then used to find the equilibrium positions of the disk at different discrete blade speeds. At any given speed, the governing equations are linearized about the equilibrium solution of the disk under the application of a space fixed external force. These linearized equations are then used to find the oscillation frequencies of the disk considering the effect of large deformation. Using multi mode approximation and different levels of nonlinearity, the frequency response of the disk considering the effect of geometrical nonlinear terms are studied. It is found that at the linear critical speed, the nonlinear frequency of the corresponding mode is not zero. Results are presented that illustrate the effect of the magnitude of disk displacement upon the frequency response characteristics. It is also found that for each mode, including the effect of the geometrical nonlinear terms due to the applied load causes a separation in the frequency responses of its backward and forward traveling waves when the disk is stationary. This effect is similar to the effect of a space fixed constraint in the linear problem. In order to verify the numerical results, experiments are conducted and the results are presented.

A non-linear viscoelastic model for sediments flocculated in the presence of seawater salts

2015 ◽  
Vol 482 ◽  
pp. 500-506 ◽  
Author(s):  
Christian Goñi ◽  
Ricardo I. Jeldres ◽  
Pedro G. Toledo ◽  
Anthony D. Stickland ◽  
Peter J. Scales
Keyword(s):  
Viscoelastic Model ◽  
Non Linear ◽  
Linear Viscoelastic ◽  
Linear Viscoelastic Model

The Analysis of an Elastic Four-Bar Linkage on a Vibrating Foundation Using a Variational Method

1980 ◽  
Vol 102 (2) ◽  
pp. 320-328 ◽  
Author(s):  
B. S. Thompson
Keyword(s):  
Variational Method ◽  
Boundary Conditions ◽  
Equations Of Motion ◽  
Stress Strain ◽  
Variational Theorem ◽  
Vibrating Foundation ◽  
Four Bar Linkage

A variational method is employed to derive the equations of motion and the associated boundary conditions for a flexible crank-rocker linkage sited on a foundation which vibrates perpendicular to the plane of the mechanism. The links oscillate in axial, flexural and torsional modes, and the equations governing this behavior are systematically constructed using a variational theorem by permitting independent variations of the stress, strain, displacement and velocity parameters.

NUMERICAL INVESTIGATION OF THERMOMECHANICAL PROCESSES UNDER SHORT-PULSED LASER IRRADIATION OF A HALF-SPACE

2021 ◽  
Vol 6 ◽  
pp. 55-65
Author(s):  
Kamila Storchak ◽  
◽  
Nina Yakovenko ◽  
Olga Polonevych ◽  
Irina Sribna ◽  
...  
Keyword(s):  
Residual Stress ◽  
Laser Irradiation ◽  
Half Space ◽  
Strain State ◽  
Thermal Stresses ◽  
Equations Of Motion ◽  
Thermomechanical Loading ◽  
Stress Strain ◽  
Stress Strain State ◽  
Residual Strains

The laser irradiation of metallic surfaces by intense heat sources is used for the generation of short probing pulses, which propagate into thin specimens and enable one to estimate their structure and mechanical properties within the framework of the classical acoustic approach. High thermal stresses and residual strains occur during the short-term irradiation of the surface of a construction by an energy source of high density. In the present work, we solve the axially symmetric problem of a half-space under thermomechanical loading. We take into account the influence of volume and inelastic characteristics of separate phases on the residual stress-strain state of the half-space. The statement of the problem includes: Cauchy relations, equations of motion, heat conduction equation, initial conditions, thermal and mechanical boundary conditions. The thermomechanical behavior of an isotropic material is described by the Bodner-Partom unified model of flow. The problem is solved with using the finite element technique. The numerical realization of our problem is performed with the help of step-by-step time integration. The equations of motion are integrated by the Newmark method. The residual stress-strain state is described using the method of numerical solution of the axisymmetric dynamic problem for a half-space under thermomechanical loading and the flow model. We established that microstructural transformations, which are taken into account due to the thermophase volume strain and dependence of inelastic characteristics of the material on the phase composition, significantly reduce residual inelastic strain and promote the appearance of compressive stresses. The three-zone region of residual stresses field formation is obtained.

Sign in / Sign up

Export Citation Format

Share Document