Tailoring of Two-Dimensional Band-Gap Materials for Broadband Frequency Isolation

2007 ◽  
Author(s):  
Mahmoud I. Hussein ◽  
Karim Hamza ◽  
Gregory M. Hulbert ◽  
Kazuhiro Saitou
Keyword(s):  
Band Gap ◽  
Vibration Isolation ◽  
Optimization Techniques ◽  
Band Gaps ◽  
Two Dimensional ◽  
Frequency Bandwidth ◽  
Periodic Composite ◽  
Unit Cells ◽  
Periodic Materials ◽  
Broadband Frequency

The spatial distribution of material phases within a periodic composite can be engineered to produce band gaps in its frequency spectrum. Applications for such composite materials include vibration and sound isolation. Previous research focused on utilizing topology optimization techniques to design two-dimensional periodic materials with a maximized band gap around a particular frequency or between two particular dispersion branches. While sizable band gaps can be realized, the possibility remains that the frequency bandwidth of the load that is to be isolated might significantly exceed the size of the band gap. In this paper, genetic algorithms are used to design squared bi-material unit cells with a maximized sum of relative band-gap widths over a prescribed frequency range of interest. The optimized unit cells therefore exhibit broadband frequency isolation characteristics. The effects of the ratios of contrasting material properties are also studied. The designed cells are subsequently used, with varying levels of material damping, to form a finite vibration isolation structure, which is subjected to broadband loading conditions. Excellent isolation properties of the synthesized material are demonstrated for this structure.

Vibration isolation characteristics of finite periodic tetra-chiral lattice coating filled with internal resonators

2016 ◽  
Vol 230 (16) ◽  
pp. 2840-2850 ◽  
Author(s):  
Dawei Zhu ◽  
Xiuchang Huang ◽  
Hongxing Hua ◽  
Hui Zheng
Keyword(s):  
Band Gap ◽  
Vibration Isolation ◽  
Periodic Structures ◽  
Low Frequency ◽  
Band Gaps ◽  
Stiffened Plate ◽  
Frequency Range ◽  
Vibration Attenuation ◽  
Unit Cells ◽  
Internal Resonators

Owing to their locally resonant mechanism, internal resonators are usually used to provide band gaps in low-frequency region for many types of periodic structures. In this study, internal resonators are used to improve the vibration attenuation ability of finite periodic tetra-chiral coating, enabling high reduction of the radiated sound power by a vibrating stiffened plate. Based on the Bloch theorem and finite element method, the band gap characteristics of tetra-chiral unit cells filled with and without internal resonators are analysed and compared to reveal the relationship between band gaps and vibration modes of such tetra-chiral unit cells. The rotational vibration of internal resonators can effectively strengthen the vibration attenuation ability of tetra-chiral lattice and extend the effective frequency range of vibration attenuation. Two tetra-chiral lattices with and without internal resonators are respectively designed and their vibration transmissibilities are measured using the hammering method. The experimental results confirm the vibration isolation effect of the internal resonators on the finite periodic tetra-chiral lattice. The tetra-chiral lattice as an acoustic coating is applied to a stiffened plate, and analysis results indicate that the internal resonators can obviously enhance the vibration attenuation ability of tetra-chiral lattice coating in the frequency range of the band gap corresponding to the rotating vibration mode of internal resonators. When the soft rubber with the internal resonators in tetra-chiral layers has gradient elastic modulus, the vibration attenuation ability and noise reduction of the tetra-chiral lattice coating are basically enhanced in the frequency range of the corresponding band gaps of tetra-chiral unit cells.

Wave propagation in acoustic metamaterials with resonantly shunted cross-shape piezos

2018 ◽  
Vol 29 (13) ◽  
pp. 2744-2753 ◽  
Author(s):  
Shengbing Chen
Keyword(s):  
Wave Propagation ◽  
Band Gap ◽  
Vibration Isolation ◽  
Band Gaps ◽  
Acoustic Metamaterials ◽  
Resonant Frequencies ◽  
Piezoelectric Patch ◽  
Transmission Properties ◽  
Gap Width ◽  
Band Gap Width

Cross-shape piezoelectric patches were originally proposed to improve the band-gap properties of acoustic metamaterials with shunting circuits. The dispersion curves are characterized through the application of finite element method. Also, the theoretical band-gap predictions are verified by simulation results obtained from COMSOL. The investigation results show that the proposed scheme distinguishes itself from the conventional square patches by broader band gaps, whose bandwidth is almost doubled. The inherent capacitance of the piezoelectric patch is strongly related to the boundary conditions, so the local resonant band gap is strongly affected by the shape of piezoelectric patches as well. As a result, the band-gap width and location of metamaterials with different shape patches are rather different, even with the same size patches. Also, negative modulus (NM) and Poisson’s ratio were observed around the resonant frequencies. The transmission properties of finite periods agree well with band-gap predictions. An obvious attenuation zone (AZ) is produced around the band-gap location, in which the wave propagation is decayed strongly. Similarly, the width of AZ of the proposed metamaterial is much larger than that of the conventional one. Hence, the proposed scheme demonstrates more advantages in the application to vibration isolation when compared with the conventional.

Origami-Based Bistable Metastructures for Low-Frequency Vibration Control

2021 ◽  
Vol 88 (5) ◽  
Author(s):  
Mingkai Zhang ◽  
Jinkyu Yang ◽  
Rui Zhu
Keyword(s):  
Vibration Isolation ◽  
Energy Analysis ◽  
Geometrical Nonlinearity ◽  
Low Frequency ◽  
Quantitative Relationship ◽  
Vibration Modes ◽  
Two Dimensional ◽  
Low Frequency Vibration ◽  
Dynamic Experiments ◽  
Unit Cells

Abstract In this research, we aim to combine origami units with vibration-filtering metastructures. By employing the bistable origami structure as resonant unit cells, we propose metastructures with low-frequency vibration isolation ability. The geometrical nonlinearity of the origami building block is harnessed for the adjustable stiffness of the metastructure’s resonant unit. The quantitative relationship between the overall stiffness and geometric parameter of the origami unit is revealed through the potential energy analysis. Both static and dynamic experiments are conducted on the bistable origami cell and the constructed beam-like metastructure to verify the adjustable stiffness and the tunable vibration isolation zone, respectively. Finally, a two-dimensional (2D) plate-like metastructure is designed and numerically studied for the control of different vibration modes. The proposed origami-based metastructures can be potentially useful in various engineering applications where structures with vibration isolation abilities are appreciated.

Acoustic Waves in Two-Dimensional Phononic Crystals With Reticular Geometric Structures

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Zi-Gui Huang ◽  
Zheng-Yu Chen
Keyword(s):  
Band Gap ◽  
Acoustic Waves ◽  
Phononic Crystals ◽  
Band Gaps ◽  
Sound Insulation ◽  
Two Dimensional ◽  
Elastic Band ◽  
Geometric Structures ◽  
2D And 3D ◽  
Elastic Band Gaps

Previous studies on photonic crystals raise the exciting topic of phononic crystals. This paper presents the results of tunable band gaps in the acoustic waves of two-dimensional phononic crystals with reticular geometric structures using the 2D and 3D finite element methods. This paper calculates and discusses the band gap variations of the bulk modes due to different sizes of reticular geometric structures. Results show that adjusting the orientation of the reticular geometric structures can increase or decrease the total elastic band gaps for mixed polarization modes. The band gap phenomena of elastic or acoustic waves can potentially be utilized to achieve vibration-free, high-precision mechanical systems, and sound insulation.

scholarly journals Two-Dimensional Composite Acoustic Metamaterials of Rectangular Unit Cell from Pentamode to Band Gap

Crystals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1457
Author(s):  
Qi Li ◽  
Ke Wu ◽  
Mingquan Zhang
Keyword(s):  
Wave Propagation ◽  
Acoustic Wave ◽  
Band Gap ◽  
Unit Cell ◽  
The Other ◽  
Two Dimensional ◽  
Acoustic Metamaterials ◽  
Acoustic Wave Propagation ◽  
Theoretical Support ◽  
Unit Cells

Pentamode metamaterials have been receiving an increasing amount of interest due to their water-like properties. In this paper, a two-dimensional composite pentamode metamaterial of rectangular unit cell is proposed. The unit cells can be classified into two groups, one with uniform arms and the other with non-uniform arms. Phononic band structures of the unit cells were calculated to derive their properties. The unit cells can be pentamode metamaterials that permit acoustic wave travelling or have a total band gap that impedes acoustic wave propagation by varying the structures. The influences of geometric parameters and materials of the composed elements on the effective velocities and anisotropy were analyzed. The metamaterials can be used for acoustic wave control under water. Simulations of materials with different unit cells were conducted to verify the calculated properties of the unit cells. The research provides theoretical support for applications of the pentamode metamaterials.

scholarly journals Vibration Attenuation Investigations on a Distributed Phononic Crystals Beam for Rubber Concrete Structures

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Chao Li ◽  
Sifeng Zhang ◽  
Liyong Gao ◽  
Wei Huang ◽  
Zhaoxin Liu
Keyword(s):  
Band Gap ◽  
Frequency Band ◽  
High Frequency ◽  
Concrete Beam ◽  
Vibration Isolation ◽  
Civil Engineering ◽  
Low Frequency ◽  
Band Gaps ◽  
Spring Force ◽  
Rubber Concrete

Locally resonant phononic crystals (LRPCs) beam is characterized by the band gaps; some frequency ranges within which flexural waves cannot propagate freely. So, the LRPCs beam can be used for noise or vibration isolation. In this paper, a LRPCs beam with distributed oscillators is proposed, and the general formula of band gaps and transmission spectrum are derived by the transfer matrix method (TMM) and spectrum element method (SEM). Subsequently, the parameter effects on band gaps are investigated in detail. Finally, a rubber concrete beam is designed to demonstrate the application of distributed LRPCs beam in civil engineering. Results reveal that the distributed LRPCs beam has multifrequency band gaps and the number of the band gaps is equal to that of the oscillators. Compared with others, the distributed LRPCs beam can reduce the stress concentration when subjected to vibration. The oscillator interval has no effect on the band gaps, which makes it more convenient to design structures. Individual changes of oscillator mass or stiffness affect the band gap location and width. When the resonance frequency of oscillator is fixed, the starting frequency of the band gap remains constant, and increasing oscillator mass of high-frequency band gap widens the high-frequency band gap, while increasing oscillator mass of low-frequency gap widens both high-frequency and low-frequency band gaps. External loads, such as the common uniform spring force provided by foundation in civil engineering, are conducive to the band gap, and when the spring force increases, all the band gaps are widened. Taken together, a configuration of LRPCs rubber concrete beam is designed, and it shows good isolation on the vibration induced by the railway. By the presented design flow chart, the research can serve as a reference for vibration isolation of LRPCs beams in civil engineering.

Band Gaps of Two-Dimensional Square-Lattice Photonic Crystal with Button-Shaped Dielectric Rods

2011 ◽  
Vol 216 ◽  
pp. 285-289
Author(s):  
S.X. Du ◽  
X. D. He ◽  
B. Liu ◽  
S. J. Li ◽  
Z.M. Zhang ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Plane Wave ◽  
Band Gap ◽  
Expansion Method ◽  
Band Gaps ◽  
Square Lattice ◽  
Two Dimensional ◽  
Plane Wave Expansion ◽  
Plane Wave Expansion Method ◽  
Wave Expansion

In this paper, a new structure of two-dimensional (2D) square-lattice photonic crystal (SLPC) with button-shaped dielectric rods (BSDRs) is designed, and the properties of band gaps are analyzed by Plane Wave Expansion Method (PWM). The optimal samples that possess the width of absolute band gap are obtained by scanning the three parameters: the radius of large circular R in button mark, the ratio of the radius of small circular to the radius of large circular r/R, and the rotating angle of button mark Ө. It is shown that when r/R=0.485, R=0.406um, and Ө =750, the largest absolute band gap of 0.0406 (ωa/2πc) exists for normalized frequencies in the range 0.7501 to 0.7910 (ωa/2πc). Besides，we can get at most five absolute band gaps when r/R=0.485, R=0.406um, and Ө =600.

Frequency characteristics of defect states in a two-dimensional phononic crystal with slit structure

2016 ◽  
Vol 30 (06) ◽  
pp. 1650025 ◽  
Author(s):  
X. P. Wang ◽  
P. Jiang ◽  
T. N. Chen ◽  
K. P. Yu
Keyword(s):  
Band Gap ◽  
Power Transmission ◽  
Phononic Crystal ◽  
Slit Width ◽  
Band Gaps ◽  
Theoretical Research ◽  
Two Dimensional ◽  
Defect States ◽  
Band Frequency ◽  
Practical Applications

In this paper, the defect state and band gap characteristics in a two-dimensional slit structure phononic crystal, consisting of slotted steel tubes embedded in an air matrix, are investigated theoretically and experimentally. Using the finite element method and supercell technique, the dispersion relationships and power transmission spectra of the slit structures are calculated. The vibration modes of the band gap edges are analyzed to clarify the mechanism of the generation of the band gaps. Additionally, the influence of the slit width on the band gaps in slit structure is investigated. The slit width was found to influence the band gaps; this is critical to understand for practical applications. Based on this finding, a method to form defect scatterers by changing the slit width of a single central scatterer, or one row of scatterers, in the perfect PC was developed. Defect bands can be induced by creating defects inside the original complete band gaps. The frequency can then be tuned by changing the slit width of defect scatterers. Meanwhile, the relationship between point defect and line defect is investigated. Finally, we verify the results of theoretical research by experiments. These results will help in fabricating devices such as acoustic filters and waveguides whose band frequency can be modulated.

Influence of Point Defects on Band Gaps of Fe-Epoxy in Two-Dimensional Phononic Crystal

2013 ◽  
Vol 652-654 ◽  
pp. 1377-1382
Author(s):  
Jiao He ◽  
Guang Hui Fan ◽  
De Xun Zhao ◽  
Ying Kai Liu
Keyword(s):  
Point Defect ◽  
Band Gap ◽  
Nearest Neighbor ◽  
Phononic Crystal ◽  
Expansion Method ◽  
Band Gaps ◽  
Two Dimensional ◽  
Defect States ◽  
Filling Fraction ◽  
Nearest Neighbor Coupling

The band gap of a new two-dimensional phononic crystal was studied by the plane-wave expansion method. The two-dimensional phononic crystal is formed by square-shape array geometry of iron cylinders with square cross section inserted in an epoxy resin. The band gaps of different structures were calculated such as defect-free, single cavity crystal point defect states, crystal point defect states with (10) direction coupling, crystal point defect states with (10) direction next-nearest-neighbor coupling, and crystal point defect states with (11) direction next-nearest-neighbor coupling. Compared with that of defect-free, it is conclude that point defect is beneficial to the production of band gaps. The bandwidth of point defect is about 5 times larger than that of the defect-free crystal with the filling fraction F=0.4. In addition, the maximum number of band gap is in the crystal point defect states with (10) direction next-nearest-neighbor coupling. It will provide a theoretical reference for the manufacture of phononic crystal.

Sign in / Sign up

Export Citation Format

Share Document