scholarly journals Assessment of Wind Energy for Nevada Using Towers and Mesoscale Modeling

2007 ◽  
Author(s):  
Darko Koracin ◽  
Richard L. Reinhardt ◽  
Marshall B. Liddle ◽  
Travis McCord ◽  
Domagoj Podnar ◽  
...  
Keyword(s):  
High Resolution ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Mesoscale Model ◽  
Horizontal Resolution ◽  
Mesoscale Modeling ◽  
Annual Cycles ◽  
Wind Power Density ◽  
Mountainous Regions

The main objectives of the study were to support wind energy assessment for all of Nevada by providing two annual cycles of high-resolution mesoscale modeling evaluated by data from surface stations and towers, estimating differences between these annual cycles and standard wind maps, and providing wind and wind power density statistics at elevations relevant to turbine operations. In addition to the 65 existing Remote Automated Weather Stations in Nevada, four 50-m-tall meteorological towers were deployed in western Nevada to capture long-term wind characteristics and provide database input to verify and improve modeling results. The modeling methodology using Mesoscale Model 5 (MM5) was developed to provide wind and wind power density estimates representing mesoscale effects that include actual synoptic forcing during the two annual cycles (horizontal resolution on the order of 2 and 3 km). The results from the two annual simulation cycles show similar wind statistics with an average difference of less than 100 W/m2. The available TrueWind results for the wind power density at 50 m show greater values of wind power density compared to both MM5-simulated annual cycles for most of the area. However, mainly in the Sierras and the mountainous regions of southern and eastern Nevada, the MM5 simulations indicate greater values for wind power density. The results of this study suggest that the synthesis of the data from a network of tower observations and high-resolution mesoscale modeling is a crucial tool for assessing the wind power density in Nevada and, more generally, other topographically developed areas.

scholarly journals Combining QuickSCAT wind data and Landsat ETM+ images to evaluate the offshore wind power resource of East Vietnam Sea

2020 ◽  
Vol 20 (2) ◽  
pp. 143-153
Author(s):  
Nguyen Xuan Tung ◽  
Do Huy Cuong ◽  
Bui Thi Bao Anh ◽  
Nguyen Thi Nhan ◽  
Tran Quang Son
Keyword(s):  
Power Generation ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Geographical Location ◽  
Wind Power Generation ◽  
Offshore Wind ◽  
Wind Data ◽  
Power Capacity ◽  
Wind Power Density

Since the East Vietnam Sea has an advantageous geographical location and rich natural resources, we can develop and manage islands and reefs in this region reasonably to declare national sovereignty. Based on 1096 scenes of QuikSCAT wind data of 2006–2009, wind power density at 10 m hight is calculated to evaluate wind energy resources of the East Vietnam Sea. With a combination of wind power density at 70 m hight calculated according to the power law of wind energy profile and reef flats extracted from 35 scenes of Landsat ETM+ images, installed wind power capacity of every island or reef is estimated to evaluate wind power generation of the East Vietnam Sea. We found that the wind power density ranges from levels 4–7, so that the wind energy can be well applied to wind power generation. The wind power density takes on a gradually increasing trend in seasons. Specifically, the wind power density is lower in spring and summer, whereas it is higher in autumn and winter. Among islands and reefs in the East Vietnam Sea, the installed wind power capacity of Hoang Sa archipelago is highest in general, the installed wind power capacity of Truong Sa archipelago is at the third level. The installed wind power capacity of Discovery Reef, Bombay Reef, Tree island, Lincoln island, Woody Island of Hoang Sa archipelago and Mariveles Reef, Ladd Reef, Petley Reef, Cornwallis South Reef of Truong Sa archipelago is relatively high, and wind power generation should be developed on these islands first.

Assessment of wind energy potential and characteristics in Qatar for clean electricity generation

2021 ◽  
pp. 0309524X2110438
Author(s):  
Carlos Méndez ◽  
Yusuf Bicer
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Wind Farm ◽  
Wind Farms ◽  
Wind Rose ◽  
Energy Potential ◽  
Wind Power Density ◽  
Wind Speeds ◽  
Wind Energy Potential

The present study analyzes the wind energy potential of Qatar, by generating a wind atlas and a Wind Power Density map for the entire country based on ERA-5 data with over 41 years of measurements. Moreover, the wind speeds’ frequency and direction are analyzed using wind recurrence, Weibull, and wind rose plots. Furthermore, the best location to install a wind farm is selected. The results indicate that, at 100 m height, the mean wind speed fluctuates between 5.6054 and 6.5257 m/s. Similarly, the Wind Power Density results reflect values between 149.46 and 335.06 W/m2. Furthermore, a wind farm located in the selected location can generate about 59.7437, 90.4414, and 113.5075 GWh/y electricity by employing Gamesa G97/2000, GE Energy 2.75-120, and Senvion 3.4M140 wind turbines, respectively. Also, these wind farms can save approximately 22,110.80, 17,617.63, and 11,637.84 tons of CO2 emissions annually.

scholarly journals Assessment of wind energy potential across varying topographical features of Tamil Nadu, India

2019 ◽  
Vol 38 (1) ◽  
pp. 175-200 ◽  
Author(s):  
Shafiqur Rehman ◽  
Narayanan Natarajan ◽  
Mangottiri Vasudevan ◽  
Luai M Alhems
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Tamil Nadu ◽  
High Energy ◽  
Energy Potential ◽  
Annual Average ◽  
Wind Power Density ◽  
Wind Energy Potential

Wind energy is one of the abundant, cheap and fast-growing renewable energy sources whose intensive extraction potential is still in immature stage in India. This study aims at the determination and evaluation of wind energy potential of three cities located at different elevations in the state of Tamil Nadu, India. The historical records of wind speed, direction, temperature and pressure were collected for three South Indian cities, namely Chennai, Erode and Coimbatore over a period of 38 years (1980-2017). The mean wind power density was observed to be highest at Chennai (129 W/m2) and lowest at Erode (76 W/m2) and the corresponding mean energy content was highest for Chennai (1129 kWh/m2/year) and lowest at Erode (666 kWh/m2/year). Considering the events of high energy-carrying winds at Chennai, Erode and Coimbatore, maximum wind power density were estimated to be 185 W/m2, 190 W/m2 and 234 W/m2, respectively. The annual average net energy yield and annual average net capacity factor were selected as the representative parameters for expressing strategic wind energy potential at geographically distinct locations having significant variation in wind speed distribution. Based on the analysis, Chennai is found to be the most suitable site for wind energy production followed by Coimbatore and Erode.

scholarly journals An Assessment of Wind Energy Potential for the Three Topographic Regions of Eritrea

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1846 ◽  
Author(s):  
Teklebrhan Negash ◽  
Erik Möllerström ◽  
Fredric Ottermo
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Coastal Region ◽  
Energy Potential ◽  
Wind Power Density ◽  
Prevailing Wind Direction ◽  
Central Highland ◽  
Wind Energy Potential

This paper presents the wind energy potential and wind characteristics for 25 wind sites in Eritrea, based on wind data from the years 2000–2005. The studied sites are distributed all over Eritrea, but can roughly be divided into three regions: coastal region, western lowlands, and central highlands. The coastal region sites have the highest potential for wind power. An uncertainty, due to extrapolating the wind speed from the 10-m measurements, should be noted. The year to year variations are typically small and, for the sites deemed as suitable for wind power, the seasonal variations are most prominent in the coastal region with a peak during the period November–March. Moreover, Weibull parameters, prevailing wind direction, and wind power density recalculated for 100 m above ground are presented for all 25 sites. Comparing the results to values from the web-based, large-scale dataset, the Global Wind Atlas (GWA), both mean wind speed and wind power density are typically higher for the measurements. The difference is especially large for the more complex-terrain central highland sites where GWA results are also likely to be more uncertain. The result of this study can be used to make preliminary assessments on possible power production potential at the given sites.

scholarly journals Wind potential estimation and proposed energy production in Southern Punjab using Weibull probability density function and surface measured data

2020 ◽  
pp. 014459872092074 ◽  
Author(s):  
Muhammad Sumair ◽  
Tauseef Aized ◽  
Syed Asad Raza Gardezi ◽  
Syed Ubaid Ur Rehman ◽  
Syed Muhammad Sohail Rehman
Keyword(s):  
Wind Speed ◽  
Energy Density ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Energy Production ◽  
Economic Assessment ◽  
Weibull Model ◽  
Wind Power Density ◽  
Wind Potential

Current work focusses on the wind potential assessment in South Punjab. Eleven locations from South Punjab have been analyzed using two-parameter Weibull model (with Energy Pattern Factor Method to estimate Weibull parameters) and five years (2014–2018) hourly wind data measured at 50 m height and collected from Pakistan Meteorological Department. Techno-economic analysis of energy production using six different turbine models was carried out with the purpose of presenting a clear picture about the importance of turbine selection at particular location. The analysis showed that Rahim Yar Khan carries the highest wind speed, highest wind power density, and wind energy density with values 4.40 ms−1, 77.2 W/m2 and 677.76 kWh/m2/year, respectively. On the other extreme, Bahawalnagar observes the least wind speed i.e. 3.60 ms−1 while Layyah observes the minimum wind power density and wind energy density as 38.96 W/m2 and 352.24 kWh/m2/year, respectively. According to National Renewable Energy Laboratory standards, wind potential ranging from 0 to 200 W/m2 is considered poor. Economic assessment was carried out to find feasibility of the location for energy harvesting. Finally, Polar diagrams drawn to show the optimum wind blowing directions shows that optimum wind direction in the region is southwest.

scholarly journals The Investigation of Wind Energy Potential in Order to Estimate Power Plants in Baladeh Mazandaran, Iran

2012 ◽  
pp. 29-33
Author(s):  
S. Asghar Gholamian ◽  
S. Bagher Soltani ◽  
R. Ilka
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Power Plants ◽  
Weather Station ◽  
Energy Potential ◽  
Wind Power Density ◽  
Synoptic Weather ◽  
Wind Potential

First step for achieving wind energy is to locate points with appropriate wind power density in a country. Wind data which are recorded in a synoptic weather station, are the best way to study the wind potential of an area. In this paper wind speed period of Baladeh synoptic weather station is studied, since it has the maximum average of wind speed among 15 stations of the MAZANDARAN Province. Weibull factors k and c are calculated for 40 months from September 2006 to December 2009 and wind power density is determined based on these data. The total average of factors k and c for a height for 50 m are 1.442 m/s and 5.1256 respectively. By using the average of factors, wind power density in 50 m height will be 147.40 watt/m2 which is categorized as weak potential in wind class. However by monthly investigation it is shown that with a 50 m wind, this station can be put in medium class in hot months of the year.

scholarly journals Assessment of Wind Energy Potential In Zwara, Libya

2021 ◽  
Vol 8 (2) ◽  
Author(s):  
Alhassan A. Teyabeen ◽  
Fathi R. Akkari ◽  
Ali E. Jwaid ◽  
Ashraf Zaghwan ◽  
Rehab Abodelah
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Ground Level ◽  
Energy Potential ◽  
Average Wind Speed ◽  
Wind Power Density ◽  
Wind Energy Potential ◽  
Wind Resource

To assess the wind energy potential at any site, the wind power density should be estimated; it evaluates the wind resource and indicates the amount of available wind energy. The purpose of this study is to estimate the monthly and annual wind power density based on the Weibull distribution using wind speed data collected in Zwara, Libya during 2007. The wind date are measured at the three hub heights of 10m, 30m, and 50m above ground level, and recorded every 10 minutes. The analysis showed that the annual average wind speed are 4.51, 5.86, 6.26 m/s for the respective mentioned heights. The average annual wind power densities at the mentioned heights were 113.71, 204.19, 243.48 , respectively.

scholarly journals Towards a sustainable 2022 FIFA World Cup in Qatar: Evaluation of wind energy potential for three football stadiums

2020 ◽  
Vol 38 (5) ◽  
pp. 1893-1913
Author(s):  
Carlos Méndez ◽  
Yusuf Bicer
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Energy Demand ◽  
Power Plants ◽  
Wind Farms ◽  
World Cup ◽  
Fifa World Cup ◽  
Wind Power Density ◽  
Football Stadiums

This study analyzes the feasibility of satisfying the demand of three Football Stadiums for the 2022 FIFA World Cup in Qatar, using the wind’s kinetic energy. For all three selected locations (Lusail, Al Rayyan, and Al Wakrah), the wind potentiality is calculated through an environmental parameters study, from which the wind power density is obtained. Furthermore, a commercial wind turbine with proper characteristics is selected, and the same case study for each location is presented, to quantify the capacity that wind energy offers for satisfying the maximum energy demand of each associated stadium. In addition, the environmental benefits and the time required by each wind farm to satisfy the energy demand are computed. The results reveal that the conditions enable the use of wind energy for this purpose, based on a 5.06 m/s, 4.63 m/s, and 5.18 m/s velocity mean for Lusail, Al Rayyan, and Al Wakrah, respectively; from which values of 187.49 W/m2, 150.96 W/m2, and 187.29 W/m2 of wind power density are obtained. Also, the proposed wind farms could produce 69,952.56 MWh/year, 59,550.19 MWh/year, and 75,333.70 MWh/year, respectively. Moreover, the wind farms should produce energy for a period of 5.64 h, 4.41 h, and 5.23 h, to satisfy the maximum demand by a football match in its associated location. Additionally, to avoid the implementation of a storage system, the electricity obtained from the wind is connected to the power grid, decreasing the quota of fossil fuel power plants. In consequence, Qatar will eliminate the emissions of approximately 23.376 tons of CO2 in total per trio of matches held in these stadiums. Finally, a post 2022 FIFA World Cup scenario is analyzed, obtaining a positive outcome from both environmental and economic perspectives, in which an average of 14,675 tons of CO2 and 6.03 Million US$ can be saved annually.

scholarly journals Climate Change Characteristics of Coastal Wind Energy Resources in Zhejiang Province Based on ERA-Interim Data

2021 ◽  
Vol 9 ◽  
Author(s):  
Nan Wang ◽  
Kai-Peng Zhou ◽  
Kuo Wang ◽  
Tao Feng ◽  
Yu-Hui Zhang ◽  
...  
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Linear Trend ◽  
Surface Wind ◽  
Sea Surface ◽  
Energy Resources ◽  
Wind Power Density ◽  
Sea Surface Wind ◽  
Wind Energy Resources

The reanalysis of sea surface wind speed is compared with the measured wind speed of five offshore wind towers in Zhejiang, China. The applicability of reanalysis data in the Zhejiang coastal sea surface and the climatic characteristics of sea surface wind power density is analyzed. Results show that the reanalysis of wind field data at the height of 10 m can well capture the wind field characteristics of the actual sea surface wind field. The sea surface wind power density effective hours increases from west to east and north to south. Then Empirical orthogonal function (EOF) is used to analyze the sea surface wind power density anomaly field, and the first mode is a consistent pattern, the second mode is a North-South dipole pattern, the third mode is an East-West dipole pattern respectively. The stability of wind energy resources grows more stable with increasing distance from the coast, and the northern sea area which is far away from the coastal sea is more stable than that of the southern sea area. The yearly linear trend of sea surface wind power density is in an East-West dipole pattern respectively. The wind energy resources are more stable farther from the coast, and the wind energy resources in the northern sea are more stable than that of the southern sea. The yearly linear trend of sea surface wind power density is the East-West dipole type, the seasonal linear trend is a significant downward trend from West to East in spring, and on the contrary in summer, a non-significant trend in autumn and winter. The monthly change index shows that the linear trend near the entrance of Hangzhou Bay in Northern Zhejiang is of weak increase or decrease, which is good for wind energy development. When the wind power density is between 0 and 150 W·m−2, its frequency mainly shows the distribution trend of high in the West and low in the East, but the wind power density is between 150 and 600 W·m−2, its distribution is the opposite.

Wind Energy Potential along the Onshore and Offshore Qatar

2020 ◽  
Author(s):  
Aboobacker Valliyil Mohammed ◽  
Ebrahim M.A.S. Al-Ansari ◽  
Shanas Puthuveetil Razak ◽  
Veerasingam Subramanian ◽  
Vethamony Ponnumony
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Time Series Data ◽  
Series Data ◽  
Energy Potential ◽  
Wind Power Density ◽  
Enso Events ◽  
Wind Energy Potential

Wind energy is one among the clean and renewable energy resources. The utilization of nonconventional energies over the conventional sources helps to reduce the carbon emissions significantly. The present study aims at investigating the wind energy potential at select coastal locations of Qatar using ERA5 winds. ERA5 is the updated reanalysis product of the European Centre for Medium-range Weather Forecasts (ECMWF), in which the scatterometer and in situ wind data are assimilated to improve the accuracy of predictions, thus the long-term and shortterm variabilities are reasonably well captured. Compared to the earlier studies, in this work, we have assessed the wind power at inland and offshore areas of Qatar, considering 40-year long (1979-2018) time series data with hourly ERA5 winds at 10-m height. The results show that there is no significant increase or decrease of wind power around Qatar in the last 40 years in most of the locations, while there is a slight decreasing trend in the offshore areas of Al Ruwais. This indicates that the average wind power is consistently available throughout the years. The links of climatic indices, especially the ENSO events with the wind climate of Qatar, are clearly evident in the long-term data. As obvious, the offshore regions of Qatar have relatively high wind power compared to the land areas. Among the selected locations, the highest annual mean wind power density is obtained in the offshore Al Ruwais (152 W/m2), followed by offshore Ras Laffan (134 W/m2) and land area of Al Khor (120 W/m2). The maximum wind power density varies between 1830 and 2120 W/m2 in the land areas, while it is between 1850 and 2410 W/m2 in the offshore areas of Qatar. The highest wind power is consistently available during the prevalence of shamal winds in winter (January-March) as well as summer (June).

Sign in / Sign up

Export Citation Format

Share Document