Parametric Analysis of Existing Gas Turbines With Inlet Evaporative and Overspray Fogging

2002 ◽  
Author(s):  
R. Bhargava ◽  
C. B. Meher-Homji
Keyword(s):  
Gas Turbine ◽  
Performance Improvement ◽  
Gas Turbines ◽  
Parametric Analysis ◽  
Design Parameters ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Performance Parameters ◽  
Wide Range ◽  
Turbine Design

With deregulation in the power generation market and the need for flexibility in terms of power augmentation during periods of high electricity demand, power plant operators all over the world are exploring means to augment power from both existing and new gas turbines. An approach becoming increasingly popular is that of high pressure fogging. In this paper, the results of a comprehensive parametric analysis on the effects of inlet fogging on a wide range of existing gas turbines have been presented. Both evaporative and overspray fogging conditions have been analyzed. The results of this study show that the performance parameters indicative of inlet fogging effects have definitive correlation with the key gas turbine design parameters. In addition, this study indicates that aeroderivative gas turbines, in comparison to the industrial machines, have higher performance improvement due to the inlet fogging effects. Plausible reasons for the observed trends are discussed in this paper. This paper represents the first systematic study on the effects of inlet fogging for a large number (a total of 67) of gas turbine engines available from major gas turbine manufacturers.

Parametric Analysis of Existing Gas Turbines With Inlet Evaporative and Overspray Fogging

2005 ◽  
Vol 127 (1) ◽  
pp. 145-158 ◽  
Author(s):  
R. Bhargava ◽  
C. B. Meher-Homji
Keyword(s):  
Gas Turbine ◽  
Performance Improvement ◽  
Gas Turbines ◽  
Parametric Analysis ◽  
Design Parameters ◽  
Performance Parameters ◽  
Heavy Duty ◽  
Wide Range ◽  
The World ◽  
Turbine Design

With deregulation in the power generation market and a need for flexibility in terms of power augmentation during the periods of high electricity demand, power plant operators all over the world are exploring means to augment power from both the existing and new gas turbines. An approach becoming increasingly popular is that of the high pressure inlet fogging. In this paper, the results of a comprehensive parametric analysis on the effects of inlet fogging on a wide range of existing gas turbines are presented. Both evaporative and overspray fogging conditions have been analyzed. The results show that the performance parameters indicative of inlet fogging effects have a definitive correlation with the key gas turbine design parameters. In addition, this study indicates that the aeroderivative gas turbines, in comparison to the heavy-duty industrial machines, have higher performance improvement due to inlet fogging effects. Plausible reasons for the observed trends are discussed. This paper represents the first systematic study on the effects of inlet fogging for a large number (a total of 67) of gas turbines available from the major gas turbine manufacturers.

Design, Development and Application of Vehicle Gas Turbine Engines

1966 ◽  
Vol 181 (1) ◽  
pp. 149-172
Author(s):  
P. A. Phillips ◽  
Peter Spear
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Low Cost ◽  
Engine Performance ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Design Development ◽  
Turbine Engine ◽  
Wide Range ◽  
Cycle Temperature

After briefly summarizing worldwide automotive gas turbine activity, the paper analyses the power plant requirements of a wide range of vehicle applications in order to formulate the design criteria for acceptable vehicle gas turbines. Ample data are available on the thermodynamic merits of various gas turbine cycles; however, the low cost of its piston engine competitor tends to eliminate all but the simplest cycles from vehicle gas turbine considerations. In order to improve the part load fuel economy, some complexity is inevitable, but this is limited to the addition of a glass ceramic regenerator in the 150 b.h.p. engine which is described in some detail. The alternative further complications necessary to achieve satisfactory vehicle response at various power/weight ratios are examined. Further improvement in engine performance will come by increasing the maximum cycle temperature. This can be achieved at lower cost by the extension of the use of ceramics. The paper is intended to stimulate the design application of the gas turbine engine.

Technological Trend of Aircraft Gas Turbines and its Effect on the Development for Ship Propulsion Plants

1970 ◽  
Author(s):  
N. K. H. Scholz
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Pressure Ratio ◽  
Gas Turbine Engine ◽  
Design Parameters ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Compression Pressure ◽  
Turbine Engine ◽  
Ship Propulsion

The effect of the main design parameters of the aero gas turbine engine cycle, namely combustion temperature and compression pressure ratio, on the specific performance values is discussed. The resulting development trend has been of essential influence on the technology. Relevant approaches are outlined. The efforts relating to weight and manufacturing expense are also indicated. In the design of aero gas turbine engines increasing consideration is given to the specific flight mission requirements, such as for instance by the introduction of the by-pass principle. Therefore direct application of aero gas turbine engines for ship propulsion without considerable modifications, as has been practiced in the past, is not considered very promising for the future. Nevertheless, there are possibilities to take advantage of aero gas turbine engine developments for ship propulsion systems. Appropriate approaches are discussed. With the experience obtained from aero gas turbine engines that will enter service in the early seventies it should be possible to develop marine gas turbine engines achieving consumptions and lifes that are competitive with those of advanced diesel units.

scholarly journals Ceramic Bearings for Use in Gas Turbine Engines

1989 ◽  
Vol 111 (1) ◽  
pp. 146-154 ◽  
Author(s):  
E. V. Zaretsky
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Wide Range ◽  
Rolling Element ◽  
Full Complement ◽  
Endurance Tests ◽  
Bearing Design ◽  
Government Laboratories

Three decades of research by U.S. industry and government laboratories have produced a vast array of data related to the use of ceramic rolling-element bearings and bearing components for aircraft gas turbine engines. Materials such as alumina, silicon carbide, titanium carbide, silicon nitride, and a crystallized glass ceramic have been investigated. Rolling-element endurance tests and analysis of full-complement bearings have been performed. Materials and bearing design methods have improved continuously over the years. This paper reviews a wide range of data and analyses with emphasis on how early NASA contributions as well as more recent data can enable the engineer or metallurgist to determine just where ceramic bearings are most applicable for gas turbines.

Key Parameters for the Performance of Impaction-Pin Nozzles Used in Inlet Fogging of Gas Turbine Engines

2005 ◽  
Author(s):  
Mustapha A. Chaker
Keyword(s):  
Gas Turbine ◽  
Droplet Size ◽  
Gas Turbines ◽  
Water Flow Rate ◽  
Turbine Engines ◽  
Operating Pressure ◽  
Gas Turbine Engines ◽  
Nozzle Orifice ◽  
Wide Range ◽  
Series Of Experiments

Application of inlet air fogging to gas turbine engines for power augmentation, has become common practice, with more than a 1000 installations worldwide including a large number of advanced gas turbines. In this paper an experimental investigation and empirical analysis of key operating parameters on the performance of impaction pin nozzles will be investigated. To this date no such correlation is available for impaction pin nozzles, which are currently used in about 75% of this type of applications. The correlations are developed from a series of experiments conducted in a wind tunnel equipped with the Malvern Spraytec droplet size measurement system. The conducted analysis covered a wide range of the relevant parameters. Mainly the water flow rate from the nozzle orifice was (0.00126 1.s−1 to 0.00063 1.s−1: 0.02 gpm to 0.1 gpm), the operating pressure was (34.5 bars to 204.1 bars: 500 psi to 3000 psi), the airflow velocity was (1.5 m.s−1 to 15.2 m.s−1: 295 fpm to 3000 fpm), the distance between the nozzle orifice and the location of measurement was (0.0127m to 0.508 m: 0.5” to 20”). Other parameters such as the plume spray one angle and the surrounding ambient psychrometric conditions, which may affect the droplet size for impaction pin nozzles is also discussed.

scholarly journals Progress in Novel Electrodeposited Bond Coats for Thermal Barrier Coating Systems

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4214
Author(s):  
Kranthi Kumar Maniam ◽  
Shiladitya Paul
Keyword(s):  
Gas Turbine ◽  
Thermal Barrier Coating ◽  
Gas Turbines ◽  
High Performance ◽  
Turbine Engines ◽  
Thermal Barrier ◽  
Gas Turbine Engines ◽  
Potential Cost ◽  
Bond Coats ◽  
Barrier Coating

The increased demand for high performance gas turbine engines has resulted in a continuous search for new base materials and coatings. With the significant developments in nickel-based superalloys, the quest for developments related to thermal barrier coating (TBC) systems is increasing rapidly and is considered a key area of research. Of key importance are the processing routes that can provide the required coating properties when applied on engine components with complex shapes, such as turbine vanes, blades, etc. Despite significant research and development in the coating systems, the scope of electrodeposition as a potential alternative to the conventional methods of producing bond coats has only been realised to a limited extent. Additionally, their effectiveness in prolonging the alloys’ lifetime is not well understood. This review summarises the work on electrodeposition as a coating development method for application in high temperature alloys for gas turbine engines and discusses the progress in the coatings that combine electrodeposition and other processes to achieve desired bond coats. The overall aim of this review is to emphasise the role of electrodeposition as a potential cost-effective alternative to produce bond coats. Besides, the developments in the electrodeposition of aluminium from ionic liquids for potential applications in gas turbines and the nuclear sector, as well as cost considerations and future challenges, are reviewed with the crucial raw materials’ current and future savings scenarios in mind.

The Effects of Ambient Conditions on Gas Turbine Emissions—Generalized Correction Factors

1978 ◽  
Vol 100 (4) ◽  
pp. 640-646 ◽  
Author(s):  
P. Donovan ◽  
T. Cackette
Keyword(s):  
Gas Turbine ◽  
Pressure Ratio ◽  
Turbine Engines ◽  
Inlet Temperature ◽  
Gas Turbine Engines ◽  
Correction Factors ◽  
Oxides Of Nitrogen ◽  
Ambient Conditions ◽  
Nitrogen Emission ◽  
Wide Range

A set of factors which reduces the variability due to ambient conditions of the hydrocarbon, carbon monoxide, and oxides of nitrogen emission indices has been developed. These factors can be used to correct an emission index to reference day ambient conditions. The correction factors, which vary with engine rated pressure ratio for NOx and idle pressure ratio for HC and CO, can be applied to a wide range of current technology gas turbine engines. The factors are a function of only the combustor inlet temperature and ambient humidity.

Determination of Cycle Configuration of Gas Turbines and Aircraft Engines by Optimization Procedure

1990 ◽  
Author(s):  
Yoshiharu Tsujikawa ◽  
Makoto Nagaoka
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Specific Impulse ◽  
Optimization Procedure ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Aircraft Engines ◽  
Scramjet Engine ◽  
Aero Engines

This paper is devoted to the analyses and optimization of simple and sophisticated cycles, particularly for various gas turbine engines and aero-engines (including scramjet engine) to achive the maximum performance. The optimization of such criteria as thermal efficiency, specific output and total performance for gas turbine engines, and overall efficiency, non-dimensional thrust and specific impulse for aero-engines have been performed by the optimization procedure with multiplier method. The comparisons of results with analytical solutions establishes the validity of the optimization procedure.

Design Parameters Prediction of New Type Gas Turbine Based on a Hybrid GRA-SVM Prediction Model

2017 ◽  
Author(s):  
Tingting Wei ◽  
Dengji Zhou ◽  
Jinwei Chen ◽  
Yaoxin Cui ◽  
Huisheng Zhang
Keyword(s):  
Prediction Model ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Technology Development ◽  
Design Parameters ◽  
Support Vector ◽  
Performance Parameters ◽  
New Type ◽  
Equipment Manufacture ◽  
Grey Relational

Since the late 1930s, gas turbine has begun to develop rapidly. To improve the economic and safety of gas turbine, new types were generated frequently by Original Equipment Manufacture (OEM). In this paper, a hybrid GRA-SVM prediction model is established to predict the main design parameters of new type gas turbines, based on the combination of Grey Relational Analysis (GRA) and Support Vector Machine (SVM). The parameters are classified into two types, system performance parameters reflecting market demands and technology development, and component performance parameters reflecting technology development and coupling connections. The regularity based on GRA determines the prediction order, then new type gas turbine parameters can be predicted with known system parameters. The model is verified by the application to SGT600. In this way, the evolution rule can be obtained with the development of gas turbine technology, and the improvement potential of several components can be predicted which will provide supports for overall performance design.

scholarly journals An Optimizing Design Point Program for Selection of a Gas Turbine Cycle

1977 ◽  
Author(s):  
G. K. Conkol ◽  
T. Singh
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Design Parameters ◽  
Turbine Engines ◽  
Original Design ◽  
Ground Vehicle ◽  
Design Point ◽  
Optimizing Design ◽  
Volume Characteristics ◽  
Gas Turbine Cycle

As vehicles evolve through the concept phase, a wide variety of engines are usually considered. For long-life vehicles such as heavy armored tracked vehicles, gas turbines have been favored because of their weight and volume characteristics at high hp levels (1500 to 2000 hp). Many existing gas turbine engines, however, are undesirable for vehicular use because their original design philosophy was aircraft oriented. In a ground vehicle, mass flow and expense are only two areas in which these engines differ greatly. Because the designer generally is not given the freedom to design an engine from scratch, he must evaluate modifications of the basic Brayton cycle. In this study, various cycles are evaluated by using a design point program in order to optimize design parameters and to recommend a cycle for heavy vehicular use.

Sign in / Sign up

Export Citation Format

Share Document