Vortex Transport and Blade Interactions in High Pressure Turbines

2003 ◽  
Author(s):  
V. S. P. Chaluvadi ◽  
A. I. Kalfas ◽  
H. P. Hodson
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Rotor Blade ◽  
Delta Wing ◽  
Classical Model ◽  
Three Dimensional ◽  
Axial Flow ◽  
Passage Vortex ◽  
Blade Row ◽  
The Impact

This paper presents a study of the three-dimensional flow field within the blade rows of a high-pressure axial flow steam turbine stage. Half-delta wings were fixed to a rotating hub to simulate an upstream rotor passage vortex. The flow field is investigated in a Low-Speed Research Turbine using pneumatic and hot-wire probes downstream of the blade row. The paper examines the impact of the delta wing vortex transport on the performance of the downstream blade row. Steady and unsteady numerical simulations were performed using structured 3D Navier-Stokes solver to further understand the flow field. The loss measurements at the exit of the stator blade showed an increase in stagnation pressure loss due to the delta wing vortex transport. The increase in loss was 21% of the datum stator loss, demonstrating the importance of this vortex interaction. The transport of the stator viscous flow through the rotor blade row is also described. The rotor exit flow was affected by the interaction between the enhanced stator passage vortex and the rotor blade row. Flow underturning near the hub and overturning towards the mid-span was observed, contrary to the classical model of overturning near the hub and underturning towards the mid-span. The unsteady numerical simulation results were further analysed to identify the entropy producing regions in the unsteady flow field.

Vortex Transport and Blade Interactions in High Pressure Turbines

2004 ◽  
Vol 126 (3) ◽  
pp. 395-405 ◽  
Author(s):  
V. S. P. Chaluvadi ◽  
A. I. Kalfas ◽  
H. P. Hodson
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Rotor Blade ◽  
Delta Wing ◽  
Classical Model ◽  
Three Dimensional ◽  
Axial Flow ◽  
Passage Vortex ◽  
Blade Row ◽  
The Impact

This paper presents a study of the three-dimensional flow field within the blade rows of a high-pressure axial flow steam turbine stage. Half-delta wings were fixed to a rotating hub to simulate an upstream rotor passage vortex. The flow field is investigated in a low-speed research turbine using pneumatic and hot-wire probes downstream of the blade row. The paper examines the impact of the delta wing vortex transport on the performance of the downstream blade row. Steady and unsteady numerical simulations were performed using structured three-dimensional Navier-Stokes solver to further understand the flow field. The loss measurements at the exit of the stator blade showed an increase in stagnation pressure loss due to the delta wing vortex transport. The increase in loss was 21% of the datum stator loss, demonstrating the importance of this vortex interaction. The transport of the stator viscous flow through the rotor blade row is also described. The rotor exit flow was affected by the interaction between the enhanced stator passage vortex and the rotor blade row. Flow underturning near the hub and overturning towards the midspan was observed, contrary to the classical model of overturning near the hub and underturning towards the midspan. The unsteady numerical simulation results were further analyzed to identify the entropy producing regions in the unsteady flow field.

Blade Row Interaction in a High-Pressure Steam Turbine

2003 ◽  
Vol 125 (1) ◽  
pp. 14-24 ◽  
Author(s):  
V. S. P. Chaluvadi ◽  
A. I. Kalfas ◽  
H. P. Hodson ◽  
H. Ohyama ◽  
E. Watanabe
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Numerical Simulations ◽  
Steam Turbine ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Axial Flow ◽  
Navier Stokes ◽  
Flow Interaction ◽  
Blade Row

This paper presents a study of the three-dimensional flow field within the blade rows of a high-pressure axial flow steam turbine stage. Compound lean angles have been employed to achieve relatively low blade loading for hub and tip sections and so reduce the secondary losses. The flow field is investigated in a low-speed research turbine using pneumatic and hot-wire probes downstream of the blade row. Steady and unsteady numerical simulations were performed using structured 3-D Navier-Stokes solver to further understand the flow field. Agreement between the simulations and the measurements has been found. The unsteady measurements indicate that there is a significant effect of the stator flow interaction in the downstream rotor blade. The transport of the stator viscous flow through the rotor blade row is described. Unsteady numerical simulations were found to be successful in predicting accurately the flow near the secondary flow interaction regions compared to steady simulations. A method to calculate the unsteady loss generated inside the blade row was developed from the unsteady numerical simulations. The contribution of various regions in the blade to the unsteady loss generation was evaluated. This method can assist the designer in identifying and optimizing the features of the flow that are responsible for the majority of the unsteady loss production. An analytical model was developed to quantify this effect for the vortex transport inside the downstream blade.

Blade Row Interaction in a High Pressure Steam Turbine

2002 ◽  
Author(s):  
V. S. P. Chaluvadi ◽  
A. I. Kalfas ◽  
H. P. Hodson ◽  
H. Ohyama ◽  
E. Watanabe
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Numerical Simulations ◽  
Steam Turbine ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Axial Flow ◽  
Navier Stokes ◽  
Flow Interaction ◽  
Blade Row

This paper presents a study of the three-dimensional flow field within the blade rows of a high-pressure axial flow steam turbine stage. Compound lean angles have been employed to achieve relatively low blade loading for hub and tip sections and so reduce the secondary losses. The flow field is investigated in a Low-Speed Research Turbine using pneumatic and hot-wire probes downstream of the blade row. Steady and unsteady numerical simulations were performed using structured 3D Navier-Stokes solver to further understand the flow field. Agreement between the simulations and the measurements has been found. The unsteady measurements indicate that there is a significant effect of the stator flow interaction in the downstream rotor blade. The transport of the stator viscous flow through the rotor blade row is described. Unsteady numerical simulations were found to be successful in predicting accurately the flow near the secondary flow interaction regions compared to steady simulations. A method to calculate the unsteady loss generated inside the blade row was developed from the unsteady numerical simulations. The contribution of various regions in the blade to the unsteady loss generation was evaluated. This method can assist the designer in identifying and optimizing the features of the flow that are responsible for the majority of the unsteady loss production. An analytical model was developed to quantify this effect for the vortex transport inside the downstream blade.

scholarly journals Experimental Study of a 3D Wake Decay and Secondary Flows Behind a Rotor Blade Row of a Low Speed Compressor Stage

1996 ◽  
Author(s):  
A. S. Witkowski ◽  
T. J. Chmielniak ◽  
M. D. Strozik
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Compressor Stage ◽  
Blade Row

Detailed measurements have been performed in a low pressure axial flow compressor stage to investigate the structure of the secondary flow field and the three-dimensional wake decay at different axial locations before and behind the rotor. The three dimensional flow field upstream and downstream of the rotor and on the centerline of the stator blade passage have been sampled periodically using a straight and a 90 degree triple-split fiber probe. Radial measurements at 39 radial stations were carried out at chosen axial positions in order to get the span-wise characteristics of the unsteady flow. Taking the experimental values of the unsteady flow velocities and turbulence properties, the effects of the rotor blade wake decay and secondary flow on the blade row spacing and stator passage flow at different operating conditions are discussed. For the normal operating point, the component of radial turbulent intensities in the leakage-flow mixing region is found to be much higher than the corresponding axial and tangential components. But for a higher value of the flow coefficient the relations are different.The results of the experiments show that triple-split fiber probes, straight and 90 degree measurements, combined with the ensemble average technique are a very useful method for the analysis of rotor flow in turbomachinery. Tip clearance vortex, secondary flow near the hub and radial flow in the wake, turbulent intensity and Reynolds stresses and also the decay of the rotor wakes can be obtained by this method.

Blade-Row Interactions in an LP Turbine at Design and Strong Off-Design Operation

2014 ◽  
Author(s):  
Martin Lipfert ◽  
Jan Habermann ◽  
Martin G. Rose ◽  
Stephan Staudacher ◽  
Yavuz Guendogdu
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Three Dimensional ◽  
Suction Side ◽  
Test Facility ◽  
Time Resolved ◽  
Joint Project ◽  
Multi Stage ◽  
Blade Row ◽  
Wake Interactions

In a joint project between the Institute of Aircraft Propulsion Systems (ILA) and MTU Aero Engines a two-stage low pressure turbine is tested at design and strong off-design conditions. The experimental data taken in the altitude test-facility aims to study the effect of positive and negative incidence of the second stator vane. A detailed insight and understanding of the blade row interactions at these regimes is sought. Steady and time-resolved pressure measurements on the airfoil as well as inlet and outlet hot-film traverses at identical Reynolds number are performed for the midspan streamline. The results are compared with unsteady multi-stage CFD predictions. Simulations agree well with the experimental data and allow detailed insights in the time-resolved flow-field. Airfoil pressure field responses are found to increase with positve incidence whereas at negative incidence the magnitude remains unchanged. Different pressure to suction side phasing is observed for the studied regimes. The assessment of unsteady blade forces reveals that changes in unsteady lift are minor compared to changes in axial force components. These increase with increasing positive incidence. The wake-interactions are predominating the blade responses in all regimes. For the positive incidence conditions vane 1 passage vortex fluid is involved in the midspan passage interaction leading to a more distorted three-dimensional flow field.

Time-Averaged and Time-Accurate Aerodynamic Effects of Forward Rotor Cavity Purge Flow for a High-Pressure Turbine: Part I—Analytical and Experimental Comparisons

2012 ◽  
Author(s):  
Brian R. Green ◽  
Randall M. Mathison ◽  
Michael G. Dunn
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Film Cooling ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Unsteady Aerodynamics ◽  
Flow Path ◽  
Field Analysis ◽  
High Pressure Turbine ◽  
Purge Flow

The effect of rotor purge flow on the unsteady aerodynamics of a high-pressure turbine stage operating at design corrected conditions has been investigated both experimentally and computationally. The experimental configuration consisted of a single-stage high-pressure turbine with a modern film-cooling configuration on the vane airfoil as well as the inner and outer end-wall surfaces. Purge flow was introduced into the cavity located between the high-pressure vane and the high-pressure disk. The high-pressure blades and the downstream low-pressure turbine nozzle row were not cooled. All hardware featured an aerodynamic design typical of a commercial high-pressure ratio turbine, and the flow path geometry was representative of the actual engine hardware. In addition to instrumentation in the main flow path, the stationary and rotating seals of the purge flow cavity were instrumented with high frequency response, flush-mounted pressure transducers and miniature thermocouples to measure flow field parameters above and below the angel wing. Predictions of the time-dependent flow field in the turbine flow path were obtained using FINE/Turbo, a three-dimensional, Reynolds-Averaged Navier-Stokes CFD code that had the capability to perform both steady and unsteady analysis. The steady and unsteady flow fields throughout the turbine were predicted using a three blade-row computational model that incorporated the purge flow cavity between the high-pressure vane and disk. The predictions were performed in an effort to mimic the design process with no adjustment of boundary conditions to better match the experimental data. The time-accurate predictions were generated using the harmonic method. Part I of this paper concentrates on the comparison of the time-averaged and time-accurate predictions with measurements in and around the purge flow cavity. The degree of agreement between the measured and predicted parameters is described in detail, providing confidence in the predictions for flow field analysis that will be provided in Part II.

Effects of Stator Wakes and Spanwise Nonuniform Inlet Conditions on the Rotor Flow of an Axial Turbine Stage

1993 ◽  
Vol 115 (1) ◽  
pp. 128-136 ◽  
Author(s):  
J. Zeschky ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Axial Flow ◽  
Tip Clearance ◽  
Hot Wire ◽  
Turbine Stage ◽  
Static Pressure Distribution ◽  
Inlet Conditions ◽  
Experimental Values ◽  
Rotor Flow

Detailed measurements have been performed in a subsonic, axial-flow turbine stage to investigate the structure of the secondary flow field and the loss generation. The data include the static pressure distribution on the rotor blade passage surfaces and radial-circumferential measurements of the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The flow field at the rotor outlet is derived from unsteady hot-wire measurements with high temporal and spatial resolution. The paper presents the formation of the tip clearance vortex and the passage vortices, which are strongly influenced by the spanwise nonuniform stator outlet flow. Taking the experimental values for the unsteady flow velocities and turbulence properties, the effect of the periodic stator wakes on the rotor flow is discussed.

Design Optimization of Profiled Endwall With Consideration of Cooling and Rim Seal Flow Effects

2016 ◽  
Author(s):  
Huimin Tang ◽  
Shuaiqiang Liu ◽  
Hualing Luo
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Secondary Flow ◽  
Three Dimensional ◽  
Great Influence ◽  
Optimization Procedure ◽  
Secondary Flows ◽  
High Pressure Turbine ◽  
Operation Condition ◽  
Turbine Performance

Profiled endwall is an effective method to improve aerodynamic performance of turbine. This approach has been widely studied in the past decade on many engines. When automatic design optimisation is considered, most of the researches are usually based on the assumption of a simplified simulation model without considering cooling and rim seal flows. However, many researchers find out that some of the benefits achieved by optimization procedure are lost when applying the high-fidelity geometry configuration. Previously, an optimization procedure has been implemented by integrating the in-house geometry manipulator, a commercial three-dimensional CFD flow solver and the optimization driver, IsightTM. This optimization procedure has been executed [12] to design profiled endwalls for a turbine cascade and a one-and-half stage axial turbine. Improvements of the turbine performance have been achieved. As the profiled endwall is applied to a high pressure turbine, the problems of cooling and rim seal flows should be addressed. In this work, the effects of rim seal flow and cooling on the flow field of two-stage high pressure turbine have been presented. Three optimization runs are performed to design the profiled endwall of Rotor-One with different optimization model to consider the effects of rim flow and cooling separately. It is found that the rim seal flow has a significant impact on the flow field. The cooling is able to change the operation condition greatly, but barely affects the secondary flow in the turbine. The influences of the profiled endwalls on the flow field in turbine and cavities have been analyzed in detail. A significant reduction of secondary flows and corresponding increase of performance are achieved when taking account of the rim flows into the optimization. The traditional optimization mechanism of profiled endwall is to reduce the cross passage gradient, which has great influence on the strength of the secondary flow. However, with considering the rim seal flows, the profiled endwall improves the turbine performance mainly by controlling the path of rim seal flow. Then the optimization procedure with consideration of rim seal flow has also been applied to the design of the profiled endwall for Stator Two.

Discrete Frequency Noise Generation From an Axial Flow Fan Blade Row

1970 ◽  
Vol 92 (1) ◽  
pp. 37-43 ◽  
Author(s):  
Ramani Mani
Keyword(s):  
Three Dimensional ◽  
Axial Flow ◽  
Acoustic Energy ◽  
Frequency Noise ◽  
Noise Generation ◽  
Two Dimensional ◽  
Axial Flow Fan ◽  
Fan Noise ◽  
Blade Row ◽  
Fan Blade

An analysis is presented which treats the noise generation from an axial flow fan row by given forces including the effects of a moving medium. The linearization of Euler’s equations to yield tractable problems for fan noise is discussed. The three-dimensional problem is decomposed into several two-dimensional problems. Finally, full details are given of a two-dimensional analysis to predict the amounts of acoustic energy, at the blade passing frequency and its harmonics, radiated up and downstream of a blade row due to its interaction with a neighboring row.

Numerical study of the impact of water injection holes arrangement on cavitation flow control

2019 ◽  
Vol 103 (1) ◽  
pp. 003685041987774 ◽  
Author(s):  
Wei Wang ◽  
Qingdian Zhang ◽  
Tao Tang ◽  
Shengpeng Lu ◽  
Qi Yi ◽  
...  
Keyword(s):  
Flow Field ◽  
Numerical Study ◽  
Water Injection ◽  
Three Dimensional ◽  
Hydrodynamic Performance ◽  
Cavitation Flow ◽  
Suction Surface ◽  
Double Row ◽  
Suppression Effect ◽  
The Impact

A method of water injection to flow field using distributed holes on the suction surface of hydrofoil is presented in this article to control cavitation flow. Modified renormalization group k–ε turbulence model is coupled with full-cavitation model to calculate periodical cavitation patterns and the dynamic characteristics of the NACA66(MOD) hydrofoil. Water injection is found to be highly effective for cavitation suppression. The cavitation suppression effect of distributed regulation of jet holes and porosities along three-dimensional spanwise hydrofoil is also investigated. The appropriate porosities of single row spanwise jet holes and optimal jet position of double row jet holes are revealed for both cavitation suppression and good hydrodynamic performance. Double row jet holes setting in forward trapezoidal arrangement shows great potential for cavitation suppression and hydrodynamic performance. This research provides a method of water injection to flow field to actively control cavitation, which will facilitate development of engineering designs.

Sign in / Sign up

Export Citation Format

Share Document