Natural Convection of Viscoplastic Fluids in an Enclosure With Localized Heating and Symmetrical Cooling

2013 ◽  
Author(s):  
Mohd. Ashique Hassan ◽  
Manabendra Pathak ◽  
Mohd. Kaleem Khan
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Constant Heat Flux ◽  
Bottom Wall ◽  
Viscoplastic Fluid ◽  
Square Enclosure ◽  
Viscoplastic Fluids ◽  
Localized Heating ◽  
Side Walls ◽  
The Heat Transfer Coefficient

In this study a computational investigation of two-dimensional, steady-state, natural convection of viscoplastic fluid in a square enclosure has been presented. The enclosure has been locally heated from the bottom wall using a constant heat flux source and symmetrically cooled from both the side walls. The other walls are maintained as insulated surfaces. Finite volume based code has been used in the simulation and Bingham model has been used to model the rheology of the enclosed viscoplastic fluids. Simulations have been made for three different heating lengths of the bottom wall. The flow phenomenon and heat transfer inside the enclosure have been investigated for different properties of viscoplastic fluid, heating conditions and heated length. It has been observed that for a particular thermal condition the heat transfer coefficient or the Nusselt number decrease with the increase in yield stress value of the fluid due to weakening of convective circulation.

Numerical computation of natural convection inside a curved-shape nanofluid-filled enclosure with nonuniform heating of the bottom wall

2019 ◽  
Vol 30 (01) ◽  
pp. 1950006 ◽  
Author(s):  
Abdellaziz Yahiaoui ◽  
Mahfoud Djezzar ◽  
Hassane Naji
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Bottom Wall ◽  
Working Fluid ◽  
Nonuniform Heating ◽  
Square Enclosure ◽  
Nusselt Numbers

This paper performs a numerical analysis of the natural convection within two-dimensional enclosures (square enclosure and enclosures with curved walls) full of a H2O-Cu nanofluid. While their vertical walls are isothermal with a cold temperature [Formula: see text], the horizontal top wall is adiabatic and the bottom wall is kept at a sinusoidal hot temperature. The working fluid is assumed to be Newtonian and incompressible. Three values of the Rayleigh number were considered, viz., 103, 104, 105, the Prandtl number is fixed at 6.2, and the volume fraction [Formula: see text] is taken equal to 0% (pure water), 10% and 20%. The numerical simulation is achieved using a 2D-in-house CFD code based on the governing equations formulated in bipolar coordinates and translated algebraically via the finite volume method. Numerical results are presented in terms of streamlines, isotherms and local and average Nusselt numbers. These show that the heat transfer rate increases with both the volume fraction and the Rayleigh number, and that the average number of Nusselt characterizing the heat transfer raises with the nanoparticles volume fraction.

scholarly journals Natural convection in tilted square cavities with triangular shaped top cold wall

1970 ◽  
Vol 39 (1) ◽  
pp. 30-39 ◽  
Author(s):  
Tamanna Sultana ◽  
Sumon Saha ◽  
Goutam Saha ◽  
Md Quamrul Islam
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Nusselt Number ◽  
Natural Convection ◽  
Numerical Study ◽  
Constant Heat Flux ◽  
Heat Transfer Process ◽  
Bottom Wall ◽  
Grashof Number ◽  
Inclination Angles

A numerical study of natural convection in a tilted square cavity with heated horizontal base and cold upper wall is presented. The present study is based in such a configuration where the top triangular wall of two different shapes is maintained at a constant low temperature. A constant heat flux source whose length is 20% of the total length of the cavity is discretely embedded at the left corner of the bottom wall. The remaining part of the bottom wall and the two sidewalls are considered to be adiabatic. The study includes computations for inclination angles of the cavity from 0° to 45°, where the Grashof number, Gr varies from 103 to 106. The Penalty finite element method has been used to see the effects of inclination angles and Grashof number on heat transfer process in the cavity. Results are presented in the form of streamline and isotherm plots as well as the variation of the average Nusselt number. Observation shows the significant effect of different triangular top surface on the heat transfer characteristics at the higher Grashof number and inclination angle. Keywords: Natural convection, Penalty finite element, Nusselt number, Isoflux heating. doi:10.3329/jme.v39i1.1831 Journal of Mechanical Engineering, vol. ME39, No. 1, June 2008 30-39  

Natural Convection of Viscoplastic Fluids in a Square Enclosure

2013 ◽  
Vol 135 (12) ◽  
Author(s):  
M. A. Hassan ◽  
Manabendra Pathak ◽  
Mohd. Kaleem Khan
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Yield Stress ◽  
Average Nusselt Number ◽  
Critical Value ◽  
Square Enclosure ◽  
Bingham Number ◽  
Viscoplastic Fluids

Viscoplastic fluids are special kind of non-Newtonian materials which deform or flow only when applied stresses are more than a critical value known as yield stress. In this work, a numerical investigation of natural convection in a square enclosure filled with viscoplastic fluids has been reported. The enclosure has been partially heated from the bottom wall by a heating source and symmetrically cooled from both the side walls. The rheology of the viscoplastic fluids has been modeled with Bingham fluid model. A scaling analysis has been presented to establish the gross dependence of heat transfer on different values of operating parameters of the problem. The effects of yield stress of the fluid on heat and fluid transport inside the enclosure have been investigated for different values of temperature difference, across the hot and cold surfaces and also for different fluids. The effects of different lengths of heated zone on the flow phenomena and heat transfer characteristics have been investigated for three different values of the heated zones. All the important results have been expressed in terms of Bingham number (Bn), Rayleigh number (Ra), and Prandtl number (Pr). It has been observed that with the increase in Bingham number, the buoyancy induced fluid circulation and convection effect decreases inside the enclosure. For each Rayleigh number, there correspond a critical Bingham number for which the heat transfer inside the enclosure takes place solely by conduction mode. This critical value increases with the increase in Rayleigh number. For fixed value of Bingham number, i.e., fixed value of yield stress, the effects of Rayleigh number and heated length on heat transfer have been observed similar to the case of natural convection in Newtonian fluid. It has been also observed that at high Bingham number the effect of increase in Rayleigh number on average Nusselt number is lesser compared to the effect of increasing Rayleigh number at low Bingham number. Using the present numerical results, a correlation of average Nusselt number as a function of other nondimensional numbers has been established.

scholarly journals Effects of Natural Convection from an Open Square Cavity Containing a Heated Circular Cylinder

2012 ◽  
Vol 47 (1) ◽  
pp. 19-28 ◽  
Author(s):  
Sheikh Anwar Hossain ◽  
MA Alim
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Circular Cylinder ◽  
Flow Field ◽  
Vertical Wall ◽  
Convection Heat Transfer ◽  
Constant Heat Flux ◽  
Bottom Wall ◽  
Coupled Equations ◽  
Inclination Angles

The problem of natural convection heat transfer in a square open cavity containing a heated and conducting circular cylinder at the centre is analyzed in this paper. As boundary conditions of the cavity, the left vertical wall is kept at a constant heat flux, bottom and top wall are kept at different high and low temperature respectively. The remaining side is open. Two dimensional laminar steady state natural convection is considered. This configuration is related in the design of electronic devices, solar energy receivers, uncovered flat plate solar collectors geothermal reservoirs etc. The fluid is concerned with different Prandtl numbers, Grashof numbers and the properties of the fluid are assumed to be constant. The development of Mathematical model is governed by the coupled equations of continuity, momentum and energy and is solved by employing Galerkin weighted finite element method. Flow field and heat transfer were predicted for fluid with Pr = 0.72 , 1.0 ,7.0; Gr = 103, 104, 105 ,106; inclination angles of the cavity are ? = 0°, 15°, 30°, 45° and diameter ratio dr = 0.2.The average Nusselt number increases as the increases of inclination angle of the cavity for lower Pr and lower temperature at bottom wall. The average Nu increases mainly for higher inclinations and for higher Gr. Various vortices and recirculations are formed into the flow field for higher Pr and higher temperature at the bottom wall. DOI: http://dx.doi.org/10.3329/bjsir.v47i1.10718Bangladesh J. Sci. Ind. Res. 47(1), 19-28, 2012

Numerical Simulation of Heat Transfer in Laminar Natural Convection of Mixed Newtonian-Non-Newtonian and Pure Non-Newtonian Nanofluids in a Square Enclosure

2021 ◽  
pp. 1-44
Author(s):  
Ajay Vallabh ◽  
P.S. Ghoshdastidar
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Base Fluid ◽  
Volume Fraction ◽  
Numerical Study ◽  
Transfer Model ◽  
Nanoparticle Concentration ◽  
Left Wall ◽  
Square Enclosure ◽  
First Case

Abstract This paper presents a steady-state heat transfer model for the natural convection of mixed Newtonian-Non-Newtonian (Alumina-Water) and pure Non-Newtonian (Alumina-0.5 wt% Carboxymethyl Cellulose (CMC)/Water) nanofluids in a square enclosure with adiabatic horizontal walls and isothermal vertical walls, the left wall being hot and the right wall cold. In the first case the nanofluid changes its Newtonian character to Non-Newtonian past 2.78% volume fraction of the nanoparticles. In the second case the base fluid itself is Non-Newtonian and the nanofluid behaves as a pure Non-Newtonian fluid. The power-law viscosity model has been adopted for the non-Newtonian nanofluids. A finite-difference based numerical study with the Stream function-Vorticity-Temperature formulation has been carried out. The homogeneous flow model has been used for modelling the nanofluids. The present results have been extensively validated with earlier works. In Case I the results indicate that Alumina-Water nanofluid shows 4% enhancement in heat transfer at 2.78% nanoparticle concentration. Following that there is a sharp decline in heat transfer with respect to that in base fluid for nanoparticle volume fractions equal to and greater than 3%. In Case II Alumina-CMC/Water nanofluid shows 17% deterioration in heat transfer with respect to that in base fluid at 1.5% nanoparticle concentration. An enhancement in heat transfer is observed for increase in hot wall temperature at a fixed volume fraction of nanoparticles, for both types of nanofluid.

scholarly journals Natural convection in a differentially heated enclosure with triangular roof

1970 ◽  
Vol 39 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Sumon Saha ◽  
Noman Hasan ◽  
Chowdhury Md Feroz
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Element Analysis ◽  
Left Wall ◽  
Square Enclosure

A numerical study has been carried out for laminar natural convection heat transfer within a two-dimensional modified square enclosure having a triangular roof. The vertical sidewalls are differentially heated considering a constant flux heat source strip is flush mounted with the left wall. The opposite wall is considered isothermal having a temperature of the surrounding fluid. The rest of the walls are adiabatic. Air is considered as the fluid inside the enclosure. The solution has been carried out on the basis of finite element analysis by a non-linear parametric solver to examine the heat transfer and fluid flow characteristics. Different heights of the triangular roof have been considered for the present analysis. Fluid flow fields and isotherm patterns and the average Nusselt number are presented for the Rayleigh numbers ranging from 103 to 106 in order to show the effects of these governing parameters. The average Nusselt number computed for the case of isoflux heating is also compared with the case of isothermal heating as available in the literature. The outcome of the present investigation shows that the convective phenomenon is greatly influenced by the inclined roof height. Keywords: Natural convection, triangular roof, Rayleigh number, isoflux heating. Doi:10.3329/jme.v39i1.1826 Journal of Mechanical Engineering, vol. ME39, No. 1, June 2008 1-7

scholarly journals Effects of Anisotropy on Natural Convection in a Vertical Porous Cavity Filled with a Heat Generation

2020 ◽  
pp. 12-27
Author(s):  
Degan Gerard ◽  
Sokpoli Amavi Ernest ◽  
Akowanou Djidjoho Christian ◽  
Vodounnou Edmond Claude
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Temperature Fields ◽  
Poisson Equations ◽  
Gravitational Vector ◽  
Side Walls ◽  
Rayleigh Numbers ◽  
Vertical Cavity

This research was devoted to the analytical study of heat transfer by natural convection in a vertical cavity, confining a porous medium, and containing a heat source. The porous medium is hydrodynamically anisotropic in permeability whose axes of permeability tensor are obliquely oriented relative to the gravitational vector and saturated with a Newtonian fluid. The side walls are cooled to the temperature  and the horizontal walls are kept adiabatic. An analytical solution to this problem is found for low Rayleigh numbers by writing the solutions of mathematical model in polynomial form of degree n of the Rayleigh number. Poisson equations obtained are solved by the modified Galerkin method. The results are presented in term of streamlines and isotherms. The distribution of the streamlines and the temperature fields are greatly influenced by the permeability anisotropy parameters and the thermal conductivity. The heat transfer decreases considerably when the Rayleigh number increases.

Sign in / Sign up

Export Citation Format

Share Document