Optimum Airflow Management for Multi-Board Rack-Mount Equipment

2003 ◽  
Author(s):  
Bhalchandra Puranik ◽  
Younes Shabany
Keyword(s):  
Design Process ◽  
Noise Level ◽  
Vacuum System ◽  
Air Velocity ◽  
Air Filter ◽  
Pull System ◽  
Geometrical Constraints ◽  
System Configurations

The airflow management for multi-board rack-mount equipment has to meet certain requirements including a minimum air velocity over the boards, uniform air velocity from board to board and from front to rear, and fan redundancy. These requirements have to be met within certain size, noise level and reliability constrains. Several configurations are usually considered: “push” or pressurized system, “pull” or vacuum system, and “push-pull” system. The purpose of this article is to demonstrate the airflow management design process for the three system configurations mentioned above, and to compare their optimum designs with each other given a set of geometrical constraints such as the overall dimensions of the equipment chassis, the card cage, and the type and thickness of the air filter. The design process is explained as a case study involving a typical multi-board rack mounted telecommunication chassis.

Developing design literacy through brand-based artefacts

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Catarina LELIS
Keyword(s):  
Empirical Study ◽  
Focus Groups ◽  
Design Process ◽  
Basic Design ◽  
Willingness To Participate ◽  
Socially Responsible ◽  
Interaction Structure ◽  
Functional Prototype ◽  
High Willingness

The brand is a powerful representational and identification-led asset that can be used to engage staff in creative, sustainable and developmental activities. Being a brand the result of, foremost, a design exercise, it is fair to suppose that it can be a relevant resource for the advancement of design literacy within organisational contexts. The main objective of this paper was to test and validate an interaction structure for an informed co-design process on visual brand artefacts. To carry on the empirical study, a university was chosen as case study as these contexts are generally rich in employee diversity. A non-functional prototype was designed, and walkthroughs were performed in five focus groups held with staff. The latter evidenced a need/wish to engage with basic design principles and high willingness to participate in the creation of brand design artefacts, mostly with the purposeof increasing its consistent use and innovate in its representation possibilities, whilst augmenting the brand’s socially responsible values.

Causing a Stir

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Camilo POTOCNJAK-OXMAN
Keyword(s):  
Design Process ◽  
Collaborative Design ◽  
Entrepreneurial Activity ◽  
Design Team ◽  
Design Processes ◽  
Early Stages

Stir was a crowd-voted grants platform aimed at supporting creative youth in the early stages of an entrepreneurial journey. Developed through an in-depth, collaborative design process, between 2015 and 2018 it received close to two hundred projects and distributed over fifty grants to emerging creatives and became one of the most impactful programs aimed at increasing entrepreneurial activity in Canberra, Australia. The following case study will provide an overview of the methodology and process used by the design team in conceiving and developing this platform, highlighting how the community’s interests and competencies were embedded in the project itself. The case provides insights for people leading collaborative design processes, with specific emphasis on some of the characteristics on programs targeting creative youth

Cyberphysical Design Automation Framework for Knowledge-based Engineering

2013 ◽  
Vol 1 (1) ◽  
pp. 158-178
Author(s):  
Urcun John Tanik
Keyword(s):  
System Design ◽  
Design Process ◽  
Design Automation ◽  
Design Theory ◽  
Knowledge Bases ◽  
Knowledge Based ◽  
Knowledge Based Engineering ◽  
Cyberphysical System ◽  
Automation Framework

Cyberphysical system design automation utilizing knowledge based engineering techniques with globally networked knowledge bases can tremendously improve the design process for emerging systems. Our goal is to develop a comprehensive architectural framework to improve the design process for cyberphysical systems (CPS) and implement a case study with Axiomatic Design Solutions Inc. to develop next generation toolsets utilizing knowledge-based engineering (KBE) systems adapted to multiple domains in the field of CPS design automation. The Cyberphysical System Design Automation Framework (CPSDAF) will be based on advances in CPS design theory based on current research and knowledge collected from global sources automatically via Semantic Web Services. A case study utilizing STEM students is discussed.

come_NET

2018 ◽  
Author(s):  
Konstantin Aal ◽  
Anne Weibert ◽  
Kai Schubert ◽  
Mary-Ann Sprenger ◽  
Thomas Von Rekowski
Keyword(s):  
Social Media ◽  
Design Process ◽  
Participatory Design ◽  
Controlled Environment ◽  
Design And Implementation ◽  
Neighborhood Contexts ◽  
Study Results ◽  
Computer Club ◽  
Close Cooperation

The case study presented in this chapter discusses the design and implementation of an online platform, “come_NET,” in the context of intercultural computer clubs in Germany. This tool was built in close cooperation with the children and adult computer club participants. It was designed to foster the sharing of ideas and experiences across distances, support collaboration, and make skills and expertise accessible to others in the local neighborhood contexts. In particular, the participatory-design process involving the children in the computer clubs fostered a profound understanding of the platform structure and functionalities. The study results show how younger children in particular were able to benefit, as the closed nature of the platform enabled them to gather experience as users of social media, but in a safe and controlled environment.

scholarly journals Adventure Code Camp: Library Mobile Design in the Backcountry

2014 ◽  
Vol 33 (3) ◽  
pp. 45 ◽  
Author(s):  
David Ward ◽  
James Hahn ◽  
Lori Mestre
Keyword(s):  
Mobile Devices ◽  
Design Process ◽  
Mobile Apps ◽  
Library Services ◽  
Mobile Web ◽  
Process Outcomes ◽  
Mobile Design ◽  
Web App ◽  
Software Services

<p>This article presents a case study exploring the use of a student Coding Camp as a bottom-up mobile design process to generate library mobile apps. A code camp sources student programmer talent and ideas for designing software services and features.  This case study reviews process, outcomes, and next steps in mobile web app coding camps. It concludes by offering implications for services design beyond the local camp presented in this study. By understanding how patrons expect to integrate library services and resources into their use of mobile devices, librarians can better design the user experience for this environment.</p>

scholarly journals Taking into Consideration the Inclusion of Wind Generation in Hybrid Microgrids: A Methodology and a Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4082
Author(s):  
Luis Arribas ◽  
Natalia Bitenc ◽  
Andreo Benech
Keyword(s):  
Power Systems ◽  
Design Process ◽  
Research Community ◽  
Wind Generation ◽  
Generation System ◽  
Economic Barriers ◽  
Wind Generation System

During the last decades, there has been great interest in the research community with respect to PV-Wind systems but figures show that, in practice, only PV-Diesel Power Systems (PVDPS) are being implemented. There are some barriers for the inclusion of wind generation in hybrid microgrids and some of them are economic barriers while others are technical barriers. This paper is focused on some of the identified technical barriers and presents a methodology to facilitate the inclusion of wind generation system in the design process in an affordable manner. An example of the application of this methodology and its results is shown through a case study. The case study is an existing PVDPS where there is an interest to incorporate wind generation in order to cope with a foreseen increase in the demand.

Research on the Green Urban Morphology Based on BIM - A Case Study on the Urban Design in Nanhe City

2013 ◽  
Vol 368-370 ◽  
pp. 78-82
Author(s):  
Ping Shu ◽  
Jun Xu ◽  
Li Jun Wang
Keyword(s):  
Urban Design ◽  
Design Process ◽  
Design Patterns ◽  
Urban Morphology ◽  
Theoretical Studies ◽  
Design Practice ◽  
Building Information Model ◽  
Building Information ◽  
Spatial Morphology

Based on theoretical studies of the urban spatial morphology, this paper introduces advanced concepts and methods of BIM (Building Information Model) into the urban design in Nanhe City ,and then respectively makes innovations of the urban design practice supported by BIM technology in the process of design, optimization and implementation of the program, attempting to explore BIM-based design patterns of the urban spatial morphology to make the traditional urban design process more rational and scientific, to expect to reach the green and sustainable urban spatial morphology.

Sign in / Sign up

Export Citation Format

Share Document