scholarly journals Surface Temperature Effect on Convective Heat Transfer Coefficients for Jet Impingement Cooling of Electric Machines With Automatic Transmission Fluid

2019 ◽  
Author(s):  
Bidzina Kekelia ◽  
Kevin Bennion ◽  
Xuhui Feng ◽  
Gilberto Moreno ◽  
J. Emily Cousineau ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Surface Temperature ◽  
Automatic Transmission ◽  
Jet Impingement ◽  
Target Surface ◽  
Electric Machines ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Transmission Fluid ◽  
Jet Velocities

Abstract In this study, the results of NREL’s continued work on experimental characterization of the thermal performance of free-surface jets of automatic transmission fluid impinged on a heated target surface are presented. The measured heat transfer coefficients are useful for understanding factors influencing performance of driveline fluid-based cooling systems for electric machines and help designers in developing high-performance, power-dense and reliable machines. Experiments were carried out for different fluid and target surface temperatures (50°C, 70°C, and 90°C for the fluid and 90°C, 100°C, 110°C, and 120°C for the target surface). Impinging jet velocities (0.5 m/s to 7.5 m/s) and the jet position on the target surface (center versus edge) were also varied. The impinging angle was kept at 90° relative to the target surface. It was found that higher target surface temperature increased heat transfer coefficients, namely, increasing surface temperature from 90°C to 120°C enhanced heat transfer coefficient values at higher impinged jet velocities (7.5 m/s) by up to 15%.

scholarly journals Convective Heat Transfer Coefficients of Automatic Transmission Fluid Jets With Implications for Electric Machine Thermal Management

2015 ◽  
Author(s):  
Kevin Bennion ◽  
Gilberto Moreno
Keyword(s):  
Heat Transfer ◽  
Thermal Management ◽  
Automatic Transmission ◽  
Electric Machines ◽  
Electric Machine ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Vehicle Propulsion ◽  
Fluid Jets ◽  
Transmission Fluid

Thermal management for electric machines (motors/generators) is important as the automotive industry continues to transition to more electrically dominant vehicle propulsion systems. Cooling of the electric machine(s) in some electric vehicle traction drive applications is accomplished by impinging automatic transmission fluid (ATF) jets onto the machine’s copper windings. In this study, we provide the results of experiments characterizing the thermal performance of ATF jets on surfaces representative of windings, using Ford’s Mercon LV ATF. Experiments were carried out at various ATF temperatures and jet velocities to quantify the influence of these parameters on heat transfer coefficients. Fluid temperatures were varied from 50°C to 90°C to encompass potential operating temperatures within an automotive transaxle environment. The jet nozzle velocities were varied from 0.5 to 10 m/s. The experimental ATF heat transfer coefficient results provided in this report are a useful resource for understanding factors that influence the performance of ATF-based cooling systems for electric machines.

Flow and Heat Transfer of Confined Impingement Jets Cooling

2000 ◽  
Author(s):  
Ting Wang ◽  
Mingjie Lin ◽  
Ronald S. Bunker
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Flow Structure ◽  
Experimental Studies ◽  
Cross Flow ◽  
Jet Impingement ◽  
Target Surface ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Transfer Behavior

Experimental studies on heat transfer and flow structure in confined impingement jets were performed. The objective of this study was to investigate the detailed heat transfer coefficient distribution on the jet impingement target surface and flow structure in the confined cavity. The distribution of heat transfer coefficients on the target surface was obtained by employing the transient liquid crystal method coupled with a 3-D inverse transient conduction scheme under Reynolds number ranging from 1039 to 5175. The results show that the average heat transfer coefficients increased linearly with the Reynolds number as Nu = 0.00304 Pr0.42Re. The effects of cross flow on heat transfer were investigated. The flow structure were analyzed to gain insight into convective heat transfer behavior.

scholarly journals Opportunities in Jet-Impingement Cooling for Gas-Turbine Engines

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6587
Author(s):  
Sandip Dutta ◽  
Prashant Singh
Keyword(s):  
Heat Transfer ◽  
Jet Impingement ◽  
Target Surface ◽  
Turbine Engines ◽  
High Porosity ◽  
Transfer Coefficients ◽  
Impingement Cooling ◽  
Heat Transfer Coefficients ◽  
Impingement Heat Transfer ◽  
Convective Heat Transfer Coefficients

Impingement heat transfer is considered one of the most effective cooling technologies that yield high localized convective heat transfer coefficients. This paper studies different configurable parameters involved in jet impingement cooling such as, exit orifice shape, crossflow regulation, target surface modification, spent air reuse, impingement channel modification, jet pulsation, and other techniques to understand which of them are critical and how these heat-transfer-enhancement concepts work. The aim of this paper is to excite the thermal sciences community of this efficient cooling technique and instill some thoughts for future innovations. New orifice shapes are becoming feasible due to innovative 3D printing technologies. However, the orifice shape variations show that it is hard to beat a sharp-edged round orifice in heat transfer coefficient, but it comes with a higher pressure drop across the orifice. Any attempt to streamline the hole shape indicated a drop in the Nusselt number, thus giving the designer some control over thermal budgeting of a component. Reduction in crossflow has been attempted with channel modifications. The use of high-porosity conductive foam in the impingement space has shown marked improvement in heat transfer performance. A list of possible research topics based on this discussion is provided in the conclusion.

Impingement Heat Transfer Enhancement on a Cylindrical, Leading Edge Model With Varying Jet Temperatures

2012 ◽  
Author(s):  
Evan L. Martin ◽  
Lesley M. Wright ◽  
Daniel C. Crites
Keyword(s):  
Heat Transfer ◽  
Experimental Technique ◽  
Leading Edge ◽  
Jet Impingement ◽  
Target Surface ◽  
Large Temperature ◽  
Transfer Coefficients ◽  
Stagnation Region ◽  
Heat Transfer Coefficients ◽  
Impingement Heat Transfer

Stagnation region heat transfer coefficients are obtained from jet impingement onto a concave surface in this experimental investigation. A single row of round jets impinge on the cylindrical target surface to replicate leading edge cooling in a gas turbine airfoil. A modified, transient lumped capacitance experimental technique was developed (and validated) to obtain stagnation region Nusselt numbers with jet-to-target surface temperature differences ranging from 60°F (33.3°C) to 400°F (222.2°C). In addition to varying jet temperatures, the jet Reynolds number (5000–20000), jet-to-jet spacing (s/d = 2–8), jet-to-target surface spacing (ℓ/d = 2–8), and impingement surface diameter-to-jet diameter (D/d = 3.6, 5.5) were independently varied. This parametric investigation has served to develop and validate a new experimental technique which can be used for investigations involving large temperature differences between the surface and fluid. Furthermore, the study has broadened the range of existing correlations currently used to predict heat transfer coefficients for leading edge, jet impingement.

Impingement Heat Transfer Enhancement on a Cylindrical, Leading Edge Model With Varying Jet Temperatures

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Evan L. Martin ◽  
Lesley M. Wright ◽  
Daniel C. Crites
Keyword(s):  
Heat Transfer ◽  
Experimental Technique ◽  
Leading Edge ◽  
Jet Impingement ◽  
Target Surface ◽  
Large Temperature ◽  
Transfer Coefficients ◽  
Stagnation Region ◽  
Heat Transfer Coefficients ◽  
Impingement Heat Transfer

Stagnation region heat transfer coefficients are obtained from jet impingement onto a concave surface in this experimental investigation. A single row of round jets impinge on the cylindrical target surface to replicate leading edge cooling in a gas turbine airfoil. A modified, transient lumped capacitance experimental technique was developed (and validated) to obtain stagnation region Nusselt numbers with jet-to-target surface temperature differences ranging from 60 °F (33.3 °C) to 400 °F (222.2 °C). In addition to varying jet temperatures, the jet Reynolds number (5000–20,000), jet-to-jet spacing (s/d = 2–8), jet-to-target surface spacing (ℓ/d = 2–8), and impingement surface diameter-to-jet diameter (D/d = 3.6, 5.5) were independently varied. This parametric investigation has served to develop and validate a new experimental technique, which can be used for investigations involving large temperature differences between the surface and fluid. Furthermore, the study has broadened the range of existing correlations currently used to predict heat transfer coefficients for leading edge jet impingement.

Jet Impingement Heat Transfer Enhancement by U-Shaped Crossflow Diverters

2019 ◽  
Vol 12 (4) ◽  
Author(s):  
Srivatsan Madhavan ◽  
Kishore Ranganath Ramakrishnan ◽  
Prashant Singh ◽  
Srinath Ekkad
Keyword(s):  
Heat Transfer ◽  
Heat Dissipation ◽  
Jet Impingement ◽  
Target Surface ◽  
Reynolds Numbers ◽  
Pumping Power ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Impingement Heat Transfer ◽  
Baseline Case

Abstract Array-jet impingement is typically used in gas turbine blade near-wall cooling, where high rates of heat dissipation is required. The accumulated crossflow mass flux results in significant reduction in jet effectiveness in the downstream rows, leading to reduced cooling performance. In this paper, a jet impingement system equipped with U-shaped ribs (hereafter referred as “diverter”) was used for diverting the crossflow away from the jets emanating from the nozzle plate. To this end, a baseline configuration of array-jet impingement onto smooth target surface is considered, where the normalized jet-to-jet spacing (x/dj = y/dj) was 6 and the normalized jet-to-target spacing (z/dj) was 2. Crossflow diverters with thickness t of 1.5875 mm and height h of 2dj (= z) were installed at a distance of 2dj from the respective jet centers. Detailed heat transfer coefficients have been calculated through transient liquid crystal experiments carried out over Reynolds numbers ranging from 3500 to 12,000. It has been observed that crossflow diverters protect the downstream jets from upstream jet deflection, thereby maximizing their stagnation cooling potential. An average of 15–30% enhancement in Nusselt number is obtained over the flow range tested. This benefit in heat transfer came at a cost of increased pumping power to maintain similar flow rate in the system. At a given pumping power, crossflow diverters yielded an enhancement of 9–15% in heat transfer compared with the baseline case.

scholarly journals Operating temperatures of oil-lubricated medium-speed gears: Numerical models and experimental results

2003 ◽  
Vol 217 (2) ◽  
pp. 87-106 ◽  
Author(s):  
H Long ◽  
A A Lord ◽  
D T Gethin ◽  
B J Roylance
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Temperature ◽  
Rotational Speed ◽  
High Speed ◽  
Applied Load ◽  
Frictional Heat ◽  
Transfer Coefficients ◽  
Gear Teeth ◽  
Heat Transfer Coefficients

This paper investigates the effects of gear geometry, rotational speed and applied load, as well as lubrication conditions on surface temperature of high-speed gear teeth. The analytical approach and procedure for estimating frictional heat flux and heat transfer coefficients of gear teeth in high-speed operational conditions was developed and accounts for the effect of oil mist as a cooling medium. Numerical simulations of tooth temperature based on finite element analysis were established to investigate temperature distributions and variations over a range of applied load and rotational speed, which compared well with experimental measurements. A sensitivity analysis of surface temperature to gear configuration, frictional heat flux, heat transfer coefficients, and oil and ambient temperatures was conducted and the major parameters influencing surface temperature were evaluated.

scholarly journals Heat Transfer Boundary Conditions in the RELAP5-3D Code

2008 ◽  
Author(s):  
Richard A. Riemke ◽  
Cliff B. Davis ◽  
Richard R. Schultz
Keyword(s):  
Heat Transfer ◽  
Boundary Conditions ◽  
Surface Temperature ◽  
Volume Fraction ◽  
Control Variable ◽  
Time Dependent ◽  
Fluid Temperature ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
General Table

The heat transfer boundary conditions used in the RELAP5-3D computer program have evolved over the years. Currently, RELAP5-3D has the following options for the heat transfer boundary conditions: (a) heat transfer correlation package option, (b) non-convective option (from radiation/conduction enclosure model or symmetry/insulated conditions), and (c) other options (setting the surface temperature to a volume fraction averaged fluid temperature of the boundary volume, obtaining the surface temperature from a control variable, obtaining the surface temperature from a time-dependent general table, obtaining the heat flux from a time-dependent general table, or obtaining heat transfer coefficients from either a time- or temperature-dependent general table). These options will be discussed, including the more recent ones.

Single-Phase and Boiling Cooling of Small Pin Fin Arrays by Multiple Nozzle Jet Impingement

1996 ◽  
Vol 118 (1) ◽  
pp. 21-26 ◽  
Author(s):  
David Copeland
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Critical Heat Flux ◽  
Single Phase ◽  
Jet Impingement ◽  
Transfer Coefficients ◽  
Pin Fin ◽  
Heat Transfer Coefficients ◽  
Aspect Ratios ◽  
Pin Fin Arrays

Experimental measurements of multiple nozzle submerged jet array impingement single-phase and boiling heat transfer were made using FC-72 and 1 cm square copper pin fin arrays, having equal width and spacing of 0.1 and 0.2 mm, with aspect ratios from 1 to 5. Arrays of 25 and 100 nozzles were used, with diameters of 0.25 to 1.0 mm providing nozzle area from 5 to 20 mm2 (5 to 20% of the heat source base area). Flow rates of 2.5 to 10 cm3/s (0.15 to 0.6 l/min) were studied, with nozzle velocities from 0.125 to 2 m/s. Single nozzles and smooth surfaces were also evaluated for comparison. Single-phase heat transfer coefficients (based on planform area) from 2.4 to 49.3 kW/m2 K were measured, while critical heat flux varied from 45 to 395 W/cm2. Correlations of the single-phase heat transfer coefficient and critical heat flux as functions of pin fin dimensions, number of nozzles, nozzle area and liquid flow rate are provided.

MEMS Impinging-Jet Cooling

2000 ◽  
Author(s):  
Qiao Lin ◽  
Shuyun Wu ◽  
Yin Yuen ◽  
Yu-Chong Tai ◽  
Chin-Ming Ho
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Jet Impingement ◽  
Impinging Jet ◽  
Impinging Jets ◽  
Measured Temperature ◽  
Transfer Coefficients ◽  
Element Analysis ◽  
Heat Transfer Coefficients ◽  
Jet Cooling

Abstract This paper presents an experimental investigation on MEMS impinging jets as applied to micro heat exchangers. We have fabricated MEMS single and array jet nozzles using DRIE technology, as well as a MEMS quartz chip providing a simulated hot surface for jet impingement. The quartz chip, with an integrated polysilicon thin-film heater and distributed temperature sensors, offers high spatial resolution in temperature measurement due to the low thermal conductivity of quartz. From measured temperature distributions, heat transfer coefficients are computed for single and array micro impinging jets using finite element analysis. The results from this study for the first time provide extensive data on spatial distributions of micro impinging-jet heat transfer coefficients, and demonstrate the viability of MEMS heat exchangers that use micro impinging jets.

Sign in / Sign up

Export Citation Format

Share Document