Design and Construction of Pipeline Integrated Oil Storage Caverns

Author(s):  
Jack Broyles ◽  
Paul Dusseault ◽  
Frank Vanden Elsen

In response to industry demand, Hardisty Caverns Limited Partnership (HCLP) has developed cost effective underground storage facilities with a capacity to store 480,000 m3 (3 million barrels) of crude oil. This project is unique through the integration of existing underground salt caverns into a significant North American crude oil transportation hub. Annually, 64 million cubic meters (400 million barrels) of oil move through this hub. This project utilizes existing caverns developed in the late 1960’s. Significant work was required to upgrade the cavern facilities and to construct new surface facilities to integrate the caverns into the crude oil transportation hub. Remote operation of the facility is performed from a control centre in Edmonton. In this paper, the key features of the design and construction of the Hardisty Cavern Storage Project will be presented. Of particular interest are the unique challenges presented due to hydraulic considerations related to cavern operation with multiple product characteristics and to provide crude oil movements exchanges between the cavern storage facilities and both low flow rate feeder pipelines and high flow rate transportation pipelines.

1981 ◽  
pp. 385-392 ◽  
Author(s):  
D.E. Shaw ◽  
M.N. Plooster ◽  
R.D. Ellison

2021 ◽  
pp. 097321792110406
Author(s):  
Swasthi Kabi Satpathy ◽  
Manas Ranjan Upadhyay ◽  
Rajlaxmi Upadhyay ◽  
Manoj Kumar Dash ◽  
Alok Satyaprakash Nayak ◽  
...  

Introduction: The oxygen concentration used in neonatal resuscitation has been a matter of debate with higher oxygen concentrations posing many adverse outcomes. Recent guidelines recommend use of blender to titrate FiO2 delivered during resuscitation. However, blender being unaffordable and unavailable at many peripheral institutions, we tried to use a low-flow flowmeter to titrate the oxygen and measure FiO2 delivered at different flow rates. Methods: From a central oxygen supply, oxygen flow was titrated using a low-flow flowmeter which was connected to a self-inflating bag and oximeter. Three variables were taken—volume of self-inflating bag, flow rate, and number of compressions per minute. FiO2 delivered with each variable, keeping the other two constant, was recorded. Results: The data obtained was analyzed by fitting the study variables into a stepwise multiple linear regression model and a linear equation was obtained. The model R square obtained suggested strong linear relationship between flow rate and FiO2 delivered. The model showed statistically significant association between flow rate and FiO2 delivery, whereas association with other variables was statistically insignificant. Discussion: Our study suggests that 76.57% of change in FiO2 is determined by change in flow rate. The major advantage of this study would be at resource poor settings where a low-flow flowmeter which is more cost effective can be used to titrate the FiO2 delivered during neonatal resuscitation.


Author(s):  
Behrokh Abbasnejad ◽  
David McGloin ◽  
Lee Clemon

Abstract Direct low flow sensing is of interest to many applications in medical and biochemical industries. Low flow rate measurement is still challenging, and conventional flow sensors such as hot films, hot wires and Pitot probes are not capable of measuring very low flow rates accurately. In some applications that require flow measurement in a small diameter tubing (e.g. intravenous (IV) infusion), using such sensors also becomes mechanically impractical. Herein, a flexible laser-induced graphitic (LIG) piezoresistive flow sensor has been fabricated in a cost-effective single processing step. The capability of the LIG sensor in very low flow rate measurement has been investigated by embedding the sensor within an intravenous (IV) line. The embedded LIG hair-like sensor was tested at ambient temperature within the IV line at flow rates ranging from 0 m/s to 0.3 m/s (IV infusion free-flow rate). The LIG hair-like sensor presented in this study detects live flow rates of IV infusions with a threshold detection limit as low as 0.02 m/s. Moreover, the deformation of the LIG hair-like sensor that lead to resistance change in response to various flow rates is simulated using COMSOL Multiphysics.


2021 ◽  
Author(s):  
Fu Jin ◽  
Wang Xi ◽  
Ding Mingming ◽  
Yang Guobin ◽  
Zhang Shunyuan ◽  
...  

Abstract The crude oil price has been keeping at a low level in recent years, which made China's government put more efforts in the development of underground oil storages in depleted salt caverns. Under the initiative of "the Belt and Road", a more concrete concept which is "the Silk Road Economic Belt and the 21st-Century Maritime Silk Road" successfully connects Jiangsu Province in the east of China. Consisting of 20 depleted caverns, Huai'an project that is still under planning is one of the most successful examples that turn depleted salt caverns into underground crude oil storages in China. Each cavern takes up 24×104m3, while the project totally takes up 480×104m3. TDMA algorithm was adopted to solve the heat exchange model of oil, brine and surrounding rocks, revealing the relationship between temperature and cavern pressure. Salt rock safety factor, salt cavern shrinkage ratio, axial stress and ground subsidence were taken into consideration to establish a 3-dimension salt rock creep model for 19 depleted salt caverns, so that the caverns’ shapes were optimized. Hydrodynamics models were used to determine the oil's flow rate into and out of a 1000m deep cavern whose thermal field was simulated by software to reveal the temperature limit of oil and brine. Due to geothermal gradient and continuous heat transmission, the average temperature of oil and brine goes up from 35°C to 44.3°C within 7 years, while the inner pressure goes up from 12.96MPa to 21.93MPa in a depleted salt cavern. Salt creep ratio decreases as oil is stored in underground caverns for a longer period. Salt is hardly penetrated by oil, while the temperature change has a strong influence on caverns’ internal pressure. The thermal expansion factor and compressibility coefficient of crude oil and brine are both crucial to the temperature's effect on internal pressure. Caverns that have larger segments in their upper-middle or middle parts are more stable and resistant to salt creep than those that have larger segments in their lower parts. When oil is injected or pumped out, it is necessary to make the internal pressure lower than the static pressure of surrounding rocks. Hence, the most appropriate flow rate of crude oil is 4.5m/s. Crude oil that is stored in deep salt caverns may be heated up to 60°C due to the geothermal gradient, but the flammable gas in oil is rapidly gasified or even explodes when it is pumped out to the surface. To avoid accidents and air pollution, oil is cooled down before being delivered via pipelines. Oil tanks used to be applied by scale in China, however they are too obvious on the ground to comply with national strategic energy safety. Compared with oil tanks of similar volumes, the Huai'an underground oil storages may save the overall cost by 35.3%. It is the first time that the salt rock creep model is established in depleted salt caverns, while the conclusion overthrew the common preference of regular cylindrical caverns.


Author(s):  
Melvin Neufeld ◽  
Bruce A. Miller

The Hardisty Cavern Facility at Hardisty, Alberta — consists of four underground salt caverns totalling 3.0 million barrels of petroleum products storage — was recently completed. This project is unique in that it integrates existing underground salt caverns into a significant North American crude oil transportation hub. Approximately 400 million barrels of oil move through this hub annually. This project utilizes existing caverns developed in the late 1960’s with significant upgrades and new infrastructure to integrate the Hardisty Cavern Facility into the crude oil transportation hub. This paper discusses the automation related innovations implemented and the challenges encountered during the course of the project. One example of innovation involves utilizing a single variable frequency drive (VFD) to perform multiple functions. Due to process requirements, the VFD was required to operate one or two cavern injection pumps. Electrical power grid constraints dictated that the VFD be used for starting and stopping the 1500 horsepower (1119 kW) pump motors. Process conditions also required that the pump motor loads be automatically transferred from VFD to the utility power grid without interruption to production. Operational flexibility was another key component of the facility automation requirements. Storage requirements for multiple petroleum products necessitated operator-selectable flow paths within the automation system. In addition, flexibility, safety, efficiency and maintainability requirements resulted in a distributed process philosophy across three separate process areas.


2021 ◽  
Vol 104 (2) ◽  
pp. 003685042199886
Author(s):  
Wenzhe Kang ◽  
Lingjiu Zhou ◽  
Dianhai Liu ◽  
Zhengwei Wang

Previous researches has shown that inlet backflow may occur in a centrifugal pump when running at low-flow-rate conditions and have nonnegligible effects on cavitation behaviors (e.g. mass flow gain factor) and cavitation stability (e.g. cavitation surge). To analyze the influences of backflow in impeller inlet, comparative studies of cavitating flows are carried out for two typical centrifugal pumps. A series of computational fluid dynamics (CFD) simulations were carried out for the cavitating flows in two pumps, based on the RANS (Reynolds-Averaged Naiver-Stokes) solver with the turbulence model of k- ω shear stress transport and homogeneous multiphase model. The cavity volume in Pump A (with less reversed flow in impeller inlet) decreases with the decreasing of flow rate, while the cavity volume in Pump B (with obvious inlet backflow) reach the minimum values at δ = 0.1285 and then increase as the flow rate decreases. For Pump A, the mass flow gain factors are negative and the absolute values increase with the decrease of cavitation number for all calculation conditions. For Pump B, the mass flow gain factors are negative for most conditions but positive for some conditions with low flow rate coefficients and low cavitation numbers, reaching the minimum value at condition of σ = 0.151 for most cases. The development of backflow in impeller inlet is found to be the essential reason for the great differences. For Pump B, the strong shearing between backflow and main flow lead to the cavitation in inlet tube. The cavity volume in the impeller decreases while that in the inlet tube increases with the decreasing of flow rate, which make the total cavity volume reaches the minimum value at δ = 0.1285 and then the mass flow gain factor become positive. Through the transient calculations for cavitating flows in two pumps, low-frequency fluctuations of pressure and flow rate are found in Pump B at some off-designed conditions (e.g. δ = 0.107, σ = 0.195). The relations among inlet pressure, inlet flow rate, cavity volume, and backflow are analyzed in detail to understand the periodic evolution of low-frequency fluctuations. Backflow is found to be the main reason which cause the positive value of mass flow gain factor at low-flow-rate conditions. Through the transient simulations of cavitating flow, backflow is considered as an important aspect closely related to the hydraulic stability of cavitating pumping system.


ORL ◽  
2021 ◽  
pp. 1-5
Author(s):  
Jingjing Liu ◽  
Tengfang Chen ◽  
Zhenggang Lv ◽  
Dezhong Wu

<b><i>Introduction:</i></b> In China, nasal cannula oxygen therapy is typically humidified. However, it is difficult to decide whether to suspend nasal cannula oxygen inhalation after the nosebleed has temporarily stopped. Therefore, we conducted a preliminary investigation on whether the use of humidified nasal cannulas in our hospital increases the incidence of epistaxis. <b><i>Methods:</i></b> We conducted a survey of 176,058 inpatients in our hospital and other city branches of our hospital over the past 3 years and obtained information concerning their use of humidified nasal cannulas for oxygen inhalation, nonhumidified nasal cannulas, anticoagulant and antiplatelet drugs, and oxygen inhalation flow rates. This information was compared with the data collected at consultation for epistaxis during these 3 years. <b><i>Results:</i></b> No significant difference was found between inpatients with humidified nasal cannulas and those without nasal cannula oxygen therapy in the incidence of consultations due to epistaxis (χ<sup>2</sup> = 1.007, <i>p</i> &#x3e; 0.05). The same trend was observed among hospitalized patients using anticoagulant and antiplatelet drugs (χ<sup>2</sup> = 2.082, <i>p</i> &#x3e; 0.05). Among the patients with an inhaled oxygen flow rate ≥5 L/min, the incidence of ear-nose-throat (ENT) consultations due to epistaxis was 0. No statistically significant difference was found between inpatients with a humidified oxygen inhalation flow rate &#x3c;5 L/min and those without nasal cannula oxygen therapy in the incidence of ENT consultations due to epistaxis (χ<sup>2</sup> = 0.838, <i>p</i> &#x3e; 0.05). A statistically significant difference was observed in the incidence of ENT consultations due to epistaxis between the low-flow nonhumidified nasal cannula and nonnasal cannula oxygen inhalation groups (χ<sup>2</sup> = 18.428, <i>p</i> &#x3c; 0.001). The same trend was observed between the 2 groups of low-flow humidified and low-flow nonhumidified nasal cannula oxygen inhalation (χ<sup>2</sup> = 26.194, <i>p</i> &#x3c; 0.001). <b><i>Discussion/Conclusion:</i></b> Neither high-flow humidified nasal cannula oxygen inhalation nor low-flow humidified nasal cannula oxygen inhalation will increase the incidence of recurrent or serious epistaxis complications; the same trend was observed for patients who use anticoagulant and antiplatelet drugs. Humidification during low-flow nasal cannula oxygen inhalation can prevent severe and repeated epistaxis to a certain extent.


Sign in / Sign up

Export Citation Format

Share Document