Numerical Investigation on Interaction Between a Semi-Submersible Platform and its Mooring System

2015 ◽  
Author(s):  
Yuanchuan Liu ◽  
Yao Peng ◽  
Decheng Wan
Keyword(s):  
Mooring Line ◽  
Mooring System ◽  
Floating Structure ◽  
Mooring Lines ◽  
Flow Solver ◽  
Floating Structures ◽  
Marine Renewable Energy ◽  
Motion Responses ◽  
Increasing Demand ◽  
Energy Engineering

With the increasing demand of floating structures in offshore, coastal and marine renewable energy engineering, the interaction between the mooring system and floating structure becomes more and more important. In this paper, motion responses of a semi-submersible platform with mooring system under regular wave conditions are investigated numerically by a viscous flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. Influence of the mooring system on the platform motion responses is evaluated in two different ways. Investigations are covered for analysis methods adopted for solving mooring lines and the length of each part of a multi-component mooring line. Several important conclusions are drawn.

Optimization of Mooring System for Multi-Arrayed Tidal Turbines in a Strong Current Area

2014 ◽  
Author(s):  
Yu-ho Rho ◽  
Chul-hee Jo ◽  
Do-youb Kim
Keyword(s):  
Power Systems ◽  
Tidal Current ◽  
Mooring Line ◽  
Limited Area ◽  
Mooring System ◽  
Ocean Energy ◽  
Floating Structure ◽  
Energy Potential ◽  
Mooring Lines ◽  
Floating Structures

Recently, focus has been placed on ocean energy resources as environmental concerns regarding the exploitation of hydrocarbons are increasing. The enormous energy potential in tidal current power fields has been exploited by installing floating tidal current power turbines. Due to other floating structures operating within a limited area, stationkeeping is needed in order to keep the motions of the floating structures within permissible limits. In this study, methods for selecting and optimizing the mooring system for floating tidal current power systems in shallow water are investigated. The mooring system provides restoring forces and moments on a floating structure, pulling the structure back toward its equilibrium position. Typically, the mooring lines are segmented in order to optimize the force and displacement characteristics known as the mooring line characteristics. The mooring system concepts investigated in this study include the distributed mass, clump weight, and buoyancy element mooring systems.

scholarly journals The Quasi-Static Response of Moored Floating Structures Based on Minimization of Mechanical Energy

2021 ◽  
Vol 9 (9) ◽  
pp. 960
Author(s):  
Chun Bao Li ◽  
Mingsheng Chen ◽  
Joonmo Choung
Keyword(s):  
Potential Energy ◽  
Mechanical Energy ◽  
Line Tension ◽  
Line Length ◽  
Theoretical Background ◽  
Mooring Line ◽  
Floating Structure ◽  
Mooring Lines ◽  
Floating Structures ◽  
Static Responses

It is essential to design a reasonable mooring line length that ensures quasi-static responses of moored floating structures are within an acceptable level, and that reduces the cost of mooring lines in the overall project. Quasi-static responses include the equilibrium position and the line tension of a moored floating structure (also called the mean value in a dynamic response), etc. The quasi-static responses derived by the classic catenary equation cannot present mooring–seabed interaction and hydrodynamic effects on a mooring line. While a commercial program can predict reasonable quasi-static responses, costly modeling is required. This motivated us to propose a new method for predicting quasi-static responses that minimizes the mechanical energy of the whole system based on basic geometric parameters, and that is easy to implement. In this study, the mechanical energy of moored floating structures is assumed to be the sum of gravitational–buoyancy potential energy, kinetic energy induced by drag forces, and spring potential energy derived by line tension. We introduce fundamental theoretical background for the development of the proposed method. We investigate the effect of quasi-static actions on mooring response, comparing the proposed method’s results with those from the catenary equation and ABAQUS software. The study reveals the shortcomings of the catenary equation in offshore applications. We also compare quasi-static responses derived by the AQWA numerical package with the results calculated from the proposed method for an 8 MW WindFloat 2 type of platform. Good agreement was drawn between the proposed method and AQWA. The proposed method proves more timesaving than AQWA in terms of modeling of mooring lines and floaters, and more accurate than the catenary equation, and can be used effectively in the early design phase of dimension mooring lengths for moored floating structures.

Numerical Simulation of a Spar Interacting With a Polyester Mooring System

2004 ◽  
Author(s):  
Minsuk Kim ◽  
Yu Ding ◽  
Jun Zhang
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loads ◽  
Mooring System ◽  
Floating Structure ◽  
Mooring Lines ◽  
Floating Structures ◽  
System A ◽  
Large Elongation ◽  
The Mean ◽  
Offset Curve

A numerical scheme, known as CABLE3D, originally developed for the simulation of dynamics of steel mooring lines is extended to allow for special properties pertaining to polyester ropes, such as relatively large elongation under tension, dependence of the modulus on loads, and energy dissipation under cyclic loads. The modified CABLE3D is then integrated into a numerical package, known as COUPLE6D, for computing the interaction between a floating structure and its polyester mooring system. A classical SPAR is chosen in this study as a representative of deepwater floating structures. By considering large elongation in polyester ropes, the static offset curve of a polyester mooring system is softer than that calculated under the assumption of small elongation. The effects of the mean loads on the modulus of polyester ropes are much greater than those of the dynamic loads. The energy dissipation in polyester ropes under cyclic loading does not play a significant role in the responses of the SPAR and tensions in a polyester mooring system. The above observations though made based on a classical SPAR may still have important implications to other floating structures moored by a polyester mooring system.

Motion Responses of a Catenary-Taut-Hybrid Moored Single Module of a Semisubmersible Very Large Floating Structure in Multisloped Seabed

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Yiting Wang ◽  
Xuefeng Wang ◽  
Shengwen Xu ◽  
Lei Wang
Keyword(s):  
Shallow Water ◽  
Time Domain ◽  
Large Scale ◽  
Bottom Topography ◽  
Three Dimensional ◽  
Low Frequency ◽  
Mooring System ◽  
Floating Structure ◽  
Mooring Lines ◽  
Motion Responses

Motion responses of moored very large floating structures (VLFSs) in coastal regions are remarkably influenced by shallow water, seabed topography, and mooring system, which were given particular focus in this paper. A three-dimensional (3D) numerical model of a moored semisubmersible single module (SMOD) was described, and time domain simulated and experimentally validated. A catenary-taut-hybrid mooring system was adopted considering coastal space limitations. Large-scale catenary mooring lines were deployed on the deep water side, while taut chains were used on the shore side to decrease the anchor radius. Although the mooring system may induce a stiffness difference between the two sides, the effectiveness of the mooring system was demonstrated by time-domain simulation and model tests. The moored semisubmersible SMOD in shallow water exhibits significant low frequency characteristics. Water depth, asymmetric stiffness, and bottom topography effects were investigated by a series of sensitivity studies. The results show that these factors play an important role in motion responses of the moored SMOD, which can further conduce to better understandings on the hydrodynamic of the semisubmersible-type VLFSs.

scholarly journals Transient Responses Evaluation of FPSO with Different Failure Scenarios of Mooring Lines

2021 ◽  
Vol 9 (2) ◽  
pp. 103
Author(s):  
Dongsheng Qiao ◽  
Binbin Li ◽  
Jun Yan ◽  
Yu Qin ◽  
Haizhi Liang ◽  
...  
Keyword(s):  
Service Condition ◽  
Mooring Line ◽  
Mooring System ◽  
Transient Effects ◽  
Floating Platform ◽  
Transient Responses ◽  
Mooring Lines ◽  
Performance Deterioration ◽  
Steady State Responses ◽  
Influence Process

During the long-term service condition, the mooring line of the deep-water floating platform may fail due to various reasons, such as overloading caused by an accidental condition or performance deterioration. Therefore, the safety performance under the transient responses process should be evaluated in advance, during the design phase. A series of time-domain numerical simulations for evaluating the performance changes of a Floating Production Storage and Offloading (FPSO) with different broken modes of mooring lines was carried out. The broken conditions include the single mooring line or two mooring lines failure under ipsilateral, opposite, and adjacent sides. The resulting transient and following steady-state responses of the vessel and the mooring line tensions were analyzed, and the corresponding influence mechanism was investigated. The accidental failure of a single or two mooring lines changes the watch circle of the vessel and the tension redistribution of the remaining mooring lines. The results indicated that the failure of mooring lines mainly influences the responses of sway, surge, and yaw, and the change rule is closely related to the stiffness and symmetry of the mooring system. The simulation results could give a profound understanding of the transient-effects influence process of mooring line failure, and the suggestions are given to account for the transient effects in the design of the mooring system.

Experimental Investigation vs Numerical Simulation of the Dynamic Response of a Moored Floating Structure to Waves

2014 ◽  
Author(s):  
Daniele Dessi ◽  
Sara Siniscalchi Minna
Keyword(s):  
Dynamical Behavior ◽  
Irregular Waves ◽  
Mooring Line ◽  
Floating Structure ◽  
Mooring Lines ◽  
Wave Energy Converters ◽  
Time Histories ◽  
Actual Configuration ◽  
Proper Orthogonal ◽  
Dynamic Wave

A combined numerical/theoretical investigation of a moored floating structure response to incoming waves is presented. The floating structure consists of three bodies, equipped with fenders, joined by elastic cables. The system is also moored to the seabed with eight mooring lines. This corresponds to an actual configuration of a floating structure used as a multipurpose platform for hosting wind-turbines, aquaculture farms or wave-energy converters. The dynamic wave response is investigated with numerical simulations in regular and irregular waves, showing a good agreement with experiments in terms of time histories of pitch, heave and surge motions as well as of the mooring line forces. To highlight the dynamical behavior of this complex configuration, the proper orthogonal decomposition is used for extracting the principal modes by which the moored structure oscillates in waves giving further insights about the way waves excites the structure.

North Sea Mooring Systems: How Reliable Are They?

2014 ◽  
Author(s):  
Will Brindley ◽  
Andrew P. Comley
Keyword(s):  
Continental Shelf ◽  
North Sea ◽  
Recent Decade ◽  
Mooring Line ◽  
Mooring System ◽  
Failure Rates ◽  
Floating Structure ◽  
Strength Capacity ◽  
Failure Statistics ◽  
Overall Reliability

In recent years a number of high profile mooring failures have emphasised the high risk nature of this element of a floating structure. Semi-submersible Mobile Offshore Drilling Units (MODUs) operating in the harsh North Sea environment have experienced approximately 3 mooring failures every 2 years, based on an average population of 34 units. In recognition of the high mooring failure rates, the HSE has introduced recommendations for more stringent mooring strength requirements for units operating on the UK Continental Shelf (UKCS) [17]. Although strength requirements are useful to assess the suitability of a mooring design, they do not provide an insight into the question: what is the reliability of the mooring system? This paper aims to answer this question by evaluating failure statistics over the most recent decade of available data. Mooring failure rates are compared between the Norwegian Continental Shelf (NCS), the UKCS, and with industry code targets to understand how overall reliability is related to the strength capacity of a mooring system. The failure statistics suggest that a typical MODU operating in the UKCS would experience a mooring line failure in heavy weather approximately every 20 operating years. This failure rate appears to be several orders of magnitude greater than industry targets used to calibrate mooring codes. Despite the increased strength requirements for the NCS, failure rates do not appear to be lower than the UKCS. This suggests that reliability does not correlate well with mooring system strength. As a result, designing to meet the more rigorous HSE requirements, which would require extensive upgrades to existing units, may not significantly increase mooring system reliability. This conclusion needs to be supported with further investigation of failure statistics in both the UKCS and NCS. In general, work remains to find practical ways to further understand past failures and so improve overall reliability.

Validation of Mooring Simulations (for Mooring Integrity Assessment) With In-Service Tension Measurements

2021 ◽  
Author(s):  
Willemijn Pauw ◽  
Remco Hageman ◽  
Joris van den Berg ◽  
Pieter Aalberts ◽  
Hironori Yamaji ◽  
...  
Keyword(s):  
Numerical Models ◽  
Weather Conditions ◽  
Mooring Line ◽  
Mooring System ◽  
Mooring Lines ◽  
Data Set ◽  
Integrity Assessment ◽  
Motion Data ◽  
Load Cells ◽  
Line Loads

Abstract Integrity of mooring system is of high importance in the offshore industry. In-service assessment of loads in the mooring lines is however very challenging. Direct monitoring of mooring line loads through load cells or inclinometers requires subsea installation work and continuous data transmission. Other solutions based on GPS and motion monitoring have been presented as solutions to overcome these limitations [1]. Monitoring solutions based on GPS and motion data provide good practical benefits, because monitoring can be conducted from accessible area. The procedure relies on accurate numerical models to model the relation between global motions and response of the mooring system. In this paper, validation of this monitoring approach for a single unit will be presented. The unit under consideration is a turret-moored unit operating in Australia. In-service measurements of motions, GPS and line tensions are available. A numerical time-domain model of the mooring system was created. This model was used to simulate mooring line tensions due to measured FPSO motions. Using the measured unit response avoids the uncertainty resulting from a prediction of the hydrodynamic response. Measurements from load cells in various mooring lines are available. These measurements were compared against the results obtained from the simulations for validation of the approach. Three different periods, comprising a total of five weeks of data, were examined in more detail. Two periods are mild weather conditions with different dominant wave directions. The third period features heavy weather conditions. In this paper, the data set and numerical model are presented. A comparison between the measured and numerically calculated mooring line forces will be presented. Differences between the calculated and measured forces are examined. This validation study has shown that in-service monitoring of mooring line loads through GPS and motion data provides a new opportunity for mooring integrity assessment with reduced monitoring system complexity.

Research on the Arrangement of the Mooring Lines of the Thruster Assisted Mooring System

2013 ◽  
Author(s):  
Gang Zou ◽  
Lei Wang ◽  
Feng Zhang
Keyword(s):  
Mooring Line ◽  
Mooring System ◽  
Main Function ◽  
Time Domain Simulation ◽  
Mooring Lines ◽  
Dynamic Positioning System ◽  
Optimum Arrangement ◽  
Line Angle ◽  
Mooring Forces ◽  
Offshore Industry

As the offshore industry is developing into deeper and deeper water, station keeping technics are becoming more and more important to the industry. Based on the dynamic positioning system, the thruster assisted mooring system (TAMS) is developed, which consisted of mooring lines and thrusters. The main function of the TAMS is to hold a structure against wind wave and current loads with its thruster and cables, which is mainly evaluated by the holding capacity of the system. The arrangement of the mooring lines (location of anchor or the mooring line angle relative to platform) will directly affect the TAMS holding capacity because of the influence of the directions of the mooring forces. So finding out an optimum arrangement of the mooring lines is essential since the performance of the TAMS depends greatly on the arrangement of the mooring lines. The TAMS of a semi-submersible platform, which is studied in this paper, consisted of eight mooring lines. By fixing the layout of the thrusters and changing the location of each mooring line for every case, the performances of the TAMS are analyzed. The platform motions, mooring line tensions and power consumptions are compared to obtain the optimum arrangement of mooring lines, and thus a thruster assisted mooring system with a better performance can be achieved. Time domain simulation is carried out in this paper to obtain the results.

Semi-Submersible Floater’s VIM Simulation Method for Mooring Line Safety Assessment

2018 ◽  
Author(s):  
Toshifumi Fujiwara
Keyword(s):  
Safety Assessment ◽  
Simulation Method ◽  
Oscillator Model ◽  
Design Stage ◽  
Mooring Line ◽  
Floating Structure ◽  
Mooring Lines ◽  
Wake Oscillator Model ◽  
Wake Oscillator ◽  
The Time Domain

The author proposed the Vortex-induced Motion (VIM) simulation method of a semi-submersible type offshore floating structure using the wake oscillator model based on the potential theory and model test data. This method is easy to use for the time-domain simulation of the VIM amplitude, that is in-line, transverse and yaw motions, of the semi-submersible floater in case of being demented mooring safety assessment of that. The simulation method presented in this paper was modified the single circular floater simulation method with the wake oscillator model for a semi-submersible floater. Some empirical parameters, obtained from the systematic model tests used many semi-submersible floaters, are only decided from external form of the semi-submersible floaters, that is the column / lower hull ratio etc. This simulation method is able to indicate general VIM trend and to be used for the assessment of mooring lines safety in the design stage. Using the VIM amplitude simulation, fatigue damage of mooring lines on one sample semi-submersible floater was investigated as an example.

Sign in / Sign up

Export Citation Format

Share Document