Coupled Time-Domain Hydro-Elastic Simulation for Submerged Floating Tunnel Under Wave Excitations

2021 ◽  
Author(s):  
Chungkuk Jin ◽  
Sung-Jae Kim ◽  
MooHyun Kim
Keyword(s):  
Time Domain ◽  
Domain Model ◽  
Mooring Line ◽  
Wave Forces ◽  
Rod Theory ◽  
Discrete Module ◽  
Simulation Based ◽  
Submerged Floating Tunnel ◽  
The Time Domain ◽  
Elastic Simulation

Abstract We develop a fully-coupled time-domain hydro-elasticity model for the Submerged Floating Tunnel (SFT) based on the Discrete-Module-Beam (DMB) method. Frequency-domain simulation based on 3D potential theory results in multibody’s hydrodynamic coefficients and excitation forces for tunnel sections. Subsequently, we build the time-domain model with the multibody Cummins equation and external stiffness matrix from the Euler-Bernoulli and Saint-Venant torsion theories. We establish the mooring line model with rod theory and couple components with translational springs at their respective connection locations. We then compare the dynamic motions, wave forces, and mooring tensions between the present and Morison-equation-based elastic models under regular wave excitations at different submergence depths. The present model is especially important for the shallowly submerged tunnel in which the Morison model shows exaggerated motions, especially at high-frequency range.

Float-Off Operation of a Land-Built COT on Dual Transportation Barges: Time- vs. Frequency-Domain Analysis

2005 ◽  
Author(s):  
Chan K. Yang ◽  
D. H. Lee ◽  
M. H. Kim ◽  
B. N. Park ◽  
Y. T. Yang ◽  
...  
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Domain Analysis ◽  
Frequency Domain Analysis ◽  
Domain Model ◽  
Mooring Line ◽  
Load Prediction ◽  
Floating Bodies ◽  
Realistic Situation ◽  
The Time Domain

In this paper, the float-off operation of a land-built crude oil tank (COT) loaded out and towed on launching dual-submersible barges is numerically simulated by a time-domain vessel-mooring-riser coupled dynamic analysis program with multiple floating bodies. The study is particularly focused on the maximum load prediction on connectors and the minimum gap prediction between barges and the COT. In case of simpler modeling, the time-domain simulation results are compared with frequency-domain results. Then, the time-domain model is run for more realistic situation with hawsers and mooring line. In hydrodynamic analysis, the interactions among the 3 floating bodies are fully taken into consideration. In the frequency-domain analysis, the connectors between barges are modeled by equivalent translational and rotational springs, the stiffness of which is estimated using Euler’s beam theory. In order to assess the possible occurrence of contact between COT and barges, the relative motions between barges and the COT at several points of interest were investigated.

Optimized Mooring Line Simulation Using a Hybrid Method Time Domain Scheme

2014 ◽  
Author(s):  
Niels Hørbye Christiansen ◽  
Per Erlend Torbergsen Voie ◽  
Jan Høgsberg ◽  
Nils Sødahl
Keyword(s):  
Hybrid Method ◽  
Time Domain ◽  
Computation Time ◽  
Mooring Line ◽  
Mooring Lines ◽  
Fem Model ◽  
Input Variables ◽  
The Time Domain ◽  
The Cost ◽  
Short Time

Dynamic analyses of slender marine structures are computationally expensive. Recently it has been shown how a hybrid method which combines FEM models and artificial neural networks (ANN) can be used to reduce the computation time spend on the time domain simulations associated with fatigue analysis of mooring lines by two orders of magnitude. The present study shows how an ANN trained to perform nonlinear dynamic response simulation can be optimized using a method known as optimal brain damage (OBD) and thereby be used to rank the importance of all analysis input. Both the training and the optimization of the ANN are based on one short time domain simulation sequence generated by a FEM model of the structure. This means that it is possible to evaluate the importance of input parameters based on this single simulation only. The method is tested on a numerical model of mooring lines on a floating off-shore installation. It is shown that it is possible to estimate the cost of ignoring one or more input variables in an analysis.

Less=Moor: A Time-Efficient Computational Tool to Assess the Behavior of Moored Ships in Waves

2017 ◽  
Author(s):  
Yijun Wang ◽  
Alex van Deyzen ◽  
Benno Beimers
Keyword(s):  
Dynamic Response ◽  
Research Effort ◽  
Equations Of Motion ◽  
Line Tension ◽  
Mooring Line ◽  
Induced Response ◽  
Wave Forces ◽  
Computational Tool ◽  
The Time Domain ◽  
Nonlinear Equations Of Motion

In the field of port design there is a need for a reliable but time-efficient method to assess the behavior of moored ships in order to determine if further detailed analysis of the behavior is required. The response of moored ships induced by gusting wind and/or waves is dynamic. Excessive motion response may cause interruption of the (un)loading operation. High line tension may cause lines to snap, introducing dangerous situations. A (detailed) Dynamic Mooring Analysis (DMA), however, is often a time-consuming and expensive exercise, especially when responses in many different environmental conditions need to be assessed. Royal HaskoningDHV has developed a time-efficient computational tool in-house to assess the wave (sea or swell) induced dynamic response of ships moored to exposed berths. The mooring line characteristics are linearized and the equations of motion are solved in the frequency domain with both the 1st and 2nd wave forces taken into account. This tool has been termed Less=Moor. The accuracy and reliability of the computational tool has been illustrated by comparing motions and mooring line forces to results obtained with software that solves the nonlinear equations of motion in the time domain (aNySIM). The calculated response of a Floating Storage and Regasification Unit (FSRU) moored to dolphins located offshore has been presented. The results show a good comparison. The computational tool can therefore be used to indicate whether the wave induced response of ships moored at exposed berths proves to be critical. The next step is to make this tool suitable to assess the dynamic response of moored ships with large wind areas, e.g. container ships, cruise vessels, RoRo or car carriers, to gusting wind. In addition, assessment of ship responses in a complicated wave field (e.g. with reflected infra-gravity waves) also requires more research effort.

On Vessel Motion Induced Vortex-Induced Vibrations of a Steel Lazy Wave Riser

2021 ◽  
Author(s):  
Decao Yin
Keyword(s):  
Vortex Shedding ◽  
Time Domain ◽  
Oscillatory Flow ◽  
Domain Model ◽  
Time Varying ◽  
Structure Interaction ◽  
Response Characteristics ◽  
Vortex Induced Vibrations ◽  
The Time Domain ◽  
Vessel Motion

Abstract Deepwater steel lazy wave risers (SLWR) subject to vessel motion will be exposed to time-varying oscillatory flow, vortices could be generated and the cyclic vortex shedding force causes the structure vibrate, such fluid-structure interaction is called vortex-induced vibrations (VIV). To investigate VIV on a riser with non-linear structures under vessel motion and oscillatory flows, time domain approaches are needed. In this study, a time-domain approach is used to simulate a full-scale SLWR. Two cases with simplified riser top motions are simulated numerically. By using default input parameters to the time domain approach, the key oscillatory flow induced VIV response characteristics such as response frequency, curvature and displacements are examined and discussed. More accurate VIV prediction could be achieved by using realistic hydrodynamic inputs into the time domain model.

scholarly journals Analytical and Numerical Analysis of the Dynamics of a Moonpool Platform–Wave Energy Buoy (MP–WEB)

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4083
Author(s):  
Kong ◽  
Liu ◽  
Su ◽  
Ao ◽  
Chen ◽  
...  
Keyword(s):  
Frequency Domain ◽  
Wave Energy ◽  
Time Domain ◽  
Impulse Response Function ◽  
Radiation Force ◽  
Resonance Phenomenon ◽  
Hydrodynamic Performance ◽  
Wave Forces ◽  
Diffraction Radiation ◽  
The Time Domain

In this work the hydrodynamic performance of a novel wave energy converter configuration was analytically and numerically studied by combining a moonpool and a wave energy buoy, called the moonpool platform–wave energy buoy (MP–WEB). A potential flow, semi-analytical approach was adopted to assess the total (incident, diffraction, radiation) wave forces acting on the device, and the wave capture and energy efficiency performance of this configuration was assessed, both in the time and frequency domain. The performance of the two configurations, single float and double float, were analyzed and compared in terms of diffraction force, added mass radiation force, motion, and power in the frequency domain. Using an impulse response function-based (IRF) method, the frequency domain results were converted in the time domain. The same parameters in the time domain were derived and the main results were confirmed. Wave energy conversion efficiency was significantly increased due to the resonance phenomenon inside the moonpool.

Simulating High Mode Vortex Induced Vibration of Riser in Linear Sheared Current Using an Empirical Time Domain Model

2020 ◽  
Author(s):  
Sang Woo Kim ◽  
Svein Sævik ◽  
Jie Wu
Keyword(s):  
Frequency Domain ◽  
Vortex Shedding ◽  
Time Domain ◽  
Structural Model ◽  
Cross Flow ◽  
Domain Model ◽  
Vortex Induced Vibrations ◽  
The One ◽  
The Time Domain ◽  
Empirical Coefficients

Abstract This paper addresses the performance evaluation of an empirical time domain Vortex Induced Vibrations (VIV) model which has been developed for several years at NTNU. Unlike the frequency domain which is the existing VIV analysis method, the time domain model introduces new vortex shedding force terms to the well known Morison equation. The extra load terms are based on the relative velocity, a synchronization model and additional empirical coefficients that describe the hydrodynamic forces due to cross-flow (CF) and In-line (IL) vortex shedding. These hydrodynamic coefficients have been tuned to fit experimental data and by considering the results from the one of existing frequency domain VIV programs, VIVANA, which is widely used for industrial design. The feature of the time domain model is that it enables to include the structural non-linearity, such as variable tension, and time-varying flow. The robustness of the new model’s features has been validated by comparing the test results in previous researches. However, the riser used in experiments has a relatively small length/diameter (L/D) ratio. It implies that there is a need for more validation to make it applicable to real riser design. In this study, the time domain VIV model is applied to perform correlation studies against the Hanøytangen experiment data for the case of linear sheared current at a large L/D ratio. The main comparison has been made with respect to the maximum fatigue damage and dominating frequency for each test condition. The results show the time domain model showed reasonable accuracy with respect to the experimental and VIVANA. The discrepancy with regard to experiment results needs to be further studied with a non-linear structural model.

Time-Domain Coupled Dynamic Analysis of Mooring Systems in Extreme Sea Condition

2018 ◽  
Author(s):  
Xuliang Han ◽  
ShiSheng Wang ◽  
Bin Xie ◽  
Wenhui Xie ◽  
Weiwei Zhou
Keyword(s):  
Dynamic Analysis ◽  
Body Surface ◽  
Time Domain ◽  
Mooring Line ◽  
Mooring System ◽  
Dynamic Coupling ◽  
Spar Platform ◽  
Coupled Dynamic Analysis ◽  
Motion Responses ◽  
The Time Domain

In order to predict the coupled motion and external wave load for the design of deepwater floating structure system, based on the three-dimensional time-domain potential flow theory, this paper present the indirect time-domain dynamic coupling method and the body nonlinear dynamic coupling method. The perturbation expansion theory is adopted to evaluate hydrodynamic on the fixed mean wetted body surface for the former method. The transient free surface Green function has been extended and applied to calculate the nonlinear hydrodynamic on the instantaneous wetted exact body surface for the latter method. The finite element model is employed to solve dynamic response of mooring line. Then asynchronous coupled method is adopted to achieve the coupled dynamic analysis of platform and mooring lines. The time-domain motion responses and spectrum analysis of Spar platform are verified and compared with the traditional indirect time-domain coupling dynamic method when the mooring system is completed. Also the time-domain motion responses and statistical characteristic of Spar platform are investigated with one mooring line broken in extreme sea condition. Some conclusions are obtained, that is, dynamic coupling effects are significant and transient position hydrodynamic calculation of platform has a great influence on the low frequency motion. The results also show that the influence on the global performance of mooring system is different when the broken line is in different place. A remarkable influence occurs when the broken mooring line is in the head-wave direction.

Investigation on Fluidelastic Instability Accompanied by Wake Shedding With a Time-Domain Model

2019 ◽  
Author(s):  
Kai Guo ◽  
Yipeng Wang ◽  
Tong Su ◽  
Liyan Liu ◽  
Zhanbin Jia ◽  
...  
Keyword(s):  
Vortex Shedding ◽  
Time Domain ◽  
Domain Model ◽  
Elastic Instability ◽  
Flow Induced Vibration ◽  
Fluid Forces ◽  
Double Peaks ◽  
Critical Instability ◽  
Periodic Characteristic ◽  
The Time Domain

Abstract As the most dangerous flow-induced vibration (FIV) mechanism, fluid-elastic instability is always accompanied by the wake shedding. If both of the two FIV mechanisms are considered, fluid forces in this condition can be quite complex. In this paper, a time-domain model based on unsteady flow theory was used to investigate the fluid-elastic instability in a rotated triangular tube array. The vortex shedding forces were simplified as harmonic forces. Computational fluid dynamics (CFD) was used to get the fluid force coefficients with vortex shedding. The model was established by a finite element code with MATLAB software and simulation results agreed with the experiment results. The results showed the critical instability velocity can be influenced by vortex shedding forces, and double peaks can be found in the frequency spectrum of displacements of tubes. The time-domain displacements showed the phases had been impacted by the shedding and periodic characteristic was found in the displacements results. The model can also be adopted in fluid-elastic instability analysis in other tube arrangements and flow conditions.

Effect of the elastic hysteresis term formulation and response to non-harmonic periodic excitations of a non-linear SDOF dynamical model with weak frequency-dependency in the time domain

2021 ◽  
pp. 095440622110182
Author(s):  
Christos Spitas ◽  
Mahmoud S Dwaikat ◽  
Vasileios Spitas
Keyword(s):  
Correction Factor ◽  
Time Domain ◽  
Hysteresis Loops ◽  
Domain Model ◽  
Viscous Damping ◽  
State Variables ◽  
Hysteretic Damping ◽  
Vibration Responses ◽  
The Time Domain ◽  
Damping Model

We elaborate a SDOF time-domain model for elastic hysteretic damping, by modifying the viscous damping model to introduce an instantaneous correction factor that recursively depends on the state variables of the system, such that the response exhibits weak dependency on frequency, corresponding to a large array of engineering materials. The effect of different formulations for calculating the instantaneous correction factor on the predicted hysteresis loops and the potential manifestation of singularities is studied. Hysteresis loops anticipated by the model are plotted and forced vibration responses to harmonic and other periodic non-harmonic excitations are simulated and discussed, also in comparison to the conventional viscous and Reid’s damping models.

Sign in / Sign up

Export Citation Format

Share Document