Modelling and Simulation of Homogeneous Charge Compression Ignition Engine Fueled by Biodiesel

2018 ◽  
Author(s):  
Meshack Hawi ◽  
Mahmoud Ahmed ◽  
Shinichi Ookawara
Keyword(s):  
Heat Release ◽  
Compression Ratio ◽  
Homogeneous Charge Compression Ignition ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Hcci Engine ◽  
Hcci Engines ◽  
Homogeneous Charge

Homogeneous charge compression ignition (HCCI) is a combustion technology which has received increased attention of researchers in the combustion field for its potential in achieving low oxides of nitrogen (NOx) and soot emission in internal combustion (IC) engines. HCCI engines have advantages of higher thermal efficiency and reduced emissions in comparison to conventional internal combustion engines. In HCCI engines, ignition is controlled by the chemical kinetics, which leads to significant variation in ignition time with changes in the operating conditions. This variation limits the practical range of operation of the engine. Additionally, since HCCI engine operation combines the operating principles of both spark ignition (SI) and compression ignition (CI) engines, HCCI engine parameters such as compression ratio and injection timing may vary significantly depending on operating conditions, including the type of fuel used. As such, considerable research efforts have been focused on establishing optimal conditions for HCCI operation with both conventional and alternative fuels. In this study, numerical simulation is used to investigate the effect of compression ratio on combustion and emission characteristics of an HCCI engine fueled by pure biodiesel. Using a zero-dimensional (0-D) reactor model and a detailed reaction mechanism for biodiesel, the influence of compression ratio on the combustion and emission characteristics are studied in Chemkin-Pro. Simulation results are validated with available experimental data in terms of incylinder pressure and heat release rate to demonstrate the accuracy of the simulation model in predicting the performance of the actual engine. Analysis shows that an increase in compression ratio leads to advanced and higher peak incylinder pressure. The results also reveal that an increase in compression ratio produces advanced ignition and increased heat release rates for biodiesel combustion. Emission of NOx is observed to increase with increase in compression ratio while the effect of compression ratio on emissions of CO, CO2 and unburned hydrocarbon (UHC) is only marginal.

Combustion and emission characteristics of a homogeneous charge compression ignition engine

2005 ◽  
Vol 219 (9) ◽  
pp. 1133-1139 ◽  
Author(s):  
Hu Tiegang ◽  
Liu Shenghua ◽  
Zhou Longbao ◽  
Zhu Chi
Keyword(s):  
Heat Release ◽  
Homogeneous Charge Compression Ignition ◽  
Cetane Number ◽  
Pressure Rise ◽  
Operating Conditions ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Hcci Engine ◽  
Homogeneous Charge

Dimethyl ether (DME) is a kind of fuel with high cetane number and low evaporating temperature, which is suitable for a homogeneous charge compression ignition (HCCI) engine. The combustion and emission characteristics of an HCCI engine fuelled with DME were investigated on a modified single-cylinder engine. The experimental results indicate that the HCCI engine combustion is a two-stage heat release process. The engine load or air-fuel ratio has significant effects on the maximum cylinder pressure and its position, the shape of the pressure rise rate and the heat release rate. The engine speed has little effect. A DME HCCI engine is smoke free, with zero NOx and low hydrocarbon and CO emissions under the operating conditions of 0.25–0.30 MPa brake mean effective pressure.

Spark Plug Modifications for Improving Ion Sensing Capabilities in a Homogeneous Charge Compression Ignition (HCCI) Engine

2009 ◽  
Author(s):  
Gregory Bogin ◽  
J. Hunter Mack ◽  
Robert W. Dibble
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Low Cost ◽  
Operating Conditions ◽  
Compression Ignition ◽  
Ion Detection ◽  
Hcci Engine ◽  
Spark Plug ◽  
Wide Range ◽  
Hcci Engines ◽  
Homogeneous Charge

Ion sensors have shown great potential as a low-cost diagnostic tool for detecting the start of combustion (SOC) in Homogeneous Charge Compression Ignition (HCCI) engines. Ion detection in an HCCI engine depends on both the combustion event as well as the type of probe used. Optimization of the shape and size of spark plug electrodes is experimentally examined in order to improve the overall quality of the ion signal for a wide range of engine operating conditions. Idling conditions for an HCCI engine are typically lean with equivalence ratios φ ≤ 0.25, which leads to reduced peak combustion temperatures. The ion signal in HCCI engines decreases exponentially with reduced combustion temperatures. Experiments are conducted on a 1.9L 4-cylinder VW TDI diesel engine (converted to run in HCCI mode) using four modified spark plugs to understand ion detection over various equivalence ratios and operating conditions. Increasing the surface area of the positive center electrode (using a positive bias voltage) provided a significant improvement in the peak ion signal.

scholarly journals Effect of Preheating Temperature and Fuel Properties on Combustion and Emission Characteristics of Homogeneous Charge Compression Ignition (HCCI) Engine

2021 ◽  
Vol 9 (5) ◽  
pp. 558-564
Keyword(s):  
Experimental Investigation ◽  
Diesel Engine ◽  
Air Temperature ◽  
Homogeneous Charge Compression Ignition ◽  
Fuel Properties ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Hcci Engine ◽  
Di Diesel Engine ◽  
Homogeneous Charge

The homogeneous charge compression ignition (HCCI) engine is the promising technology to reduce the pollutants without affecting its performance and it is also proved by the many studies. This study investigates the performance and emission characteristics of HCCI engine fuelled with diesel –waste cooking oil (WCO) blends and also analysed the effect of air temperature and fuel properties on HCCI engine combustion. The experimental investigation was conducted with single cylinder DI diesel engine and it was slightly modified to port injection system for premixing the charge. The electric air heater was adopted in suction pipe to preheat the inlet air. The experimental investigation conducted in two phases, in the first phase the conventional DI diesel engine was tested with different fuel blends such as B25, B50, B75 and B100 and notes the readings. In the next phase, HCCI engine was operated with same blend ratios. During the experimentation on HCCI engine, the suction air temperature was varied between 40⁰C to 90⁰C. From the experimental results, it was found that the HCCI engine has emitted low NOx and smoke emissions at 80⁰C of air temperature for all the blends. Whereas the HCCI engine emitted more carbon monoxide (CO) and hydrocarbon (HC) emissions due to lean mixture causes misfiring in the chamber. In addition, it is also noted that the value of CO and HC has been varied with diesel –WCO blends. The specific fuel consumption (SFC) is increased for diesel and biodiesel fuel in HCCI engine compared to compression ignition (CI) engine

scholarly journals Homogeneous Charge Compression Ignition Combustion: Challenges and Proposed Solutions

2013 ◽  
Vol 2013 ◽  
pp. 1-14 ◽  
Author(s):  
Mohammad Izadi Najafabadi ◽  
Nuraini Abdul Aziz
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Fuel Efficiency ◽  
Operating Conditions ◽  
Future Research ◽  
Compression Ignition ◽  
Ignition Timing ◽  
Ic Engine ◽  
Hcci Engine ◽  
Wide Range ◽  
Homogeneous Charge

Engine and car manufacturers are experiencing the demand concerning fuel efficiency and low emissions from both consumers and governments. Homogeneous charge compression ignition (HCCI) is an alternative combustion technology that is cleaner and more efficient than the other types of combustion. Although the thermal efficiency andNOxemission of HCCI engine are greater in comparison with traditional engines, HCCI combustion has several main difficulties such as controlling of ignition timing, limited power output, and weak cold-start capability. In this study a literature review on HCCI engine has been performed and HCCI challenges and proposed solutions have been investigated from the point view ofIgnition Timingthat is the main problem of this engine. HCCI challenges are investigated by many IC engine researchers during the last decade, but practical solutions have not been presented for a fully HCCI engine. Some of the solutions are slow response time and some of them are technically difficult to implement. So it seems that fully HCCI engine needs more investigation to meet its mass-production and the future research and application should be considered as part of an effort to achieve low-temperature combustion in a wide range of operating conditions in an IC engine.

Sensitivity Analysis of Combustion Timing of Homogeneous Charge Compression Ignition Gasoline Engines

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Chia-Jui Chiang ◽  
Anna G. Stefanopoulou
Keyword(s):  
Sensitivity Analysis ◽  
Homogeneous Charge Compression Ignition ◽  
Quantitative Information ◽  
Operating Conditions ◽  
Dominant Factor ◽  
Compression Ignition ◽  
Hcci Engine ◽  
Wide Range ◽  
Start Of Combustion ◽  
Homogeneous Charge

The goal of this paper is to identify the dominant factors that should be included in a control oriented model in order to predict the start of combustion in a homogeneous charge compression ignition (HCCI) engine. Qualitative and quantitative information on the individual effects of fuel and exhaust gas recirculation on the HCCI combustion is provided. Using sensitivity analysis around a wide range of operating conditions of a single-cylinder port-injection gasoline HCCI engine, we find that temperature is the dominant factor in determining the start of combustion. Charge temperature thus becomes the “spark” in a HCCI engine. Therefore, a model without the composition terms should be adequate for model based regulation of the combustion timing in a port-injection gasoline HCCI engine with high dilution from the exhaust.

scholarly journals Characterisation of the combustion process in the spark ignition and homogeneous charge compression ignition engine

2018 ◽  
Vol 22 (5) ◽  
pp. 2025-2037
Author(s):  
Ante Vucetic ◽  
Mladen Bozic ◽  
Darko Kozarac ◽  
Zoran Lulic
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Compression Ignition ◽  
Combustion Mode ◽  
Hcci Engine ◽  
Combustion Modes ◽  
Mode Of Operation ◽  
Start Of Combustion ◽  
Homogeneous Charge

Homogeneous charge compression ignition (HCCI) engine is a potential solution for reducing air pollution and for satisfying legal limits regarding the emissions from internal combustion engines. The HCCI engines have advantages of lower emissions of NOx and particulate matter, compared to the standard combustion modes, while on the other hand one of the major disadvantages is the difficulty of control of start of combustion, since the start of combustion is highly sensitive to the intake air temperature. Additional advantage of the HCCI engine is the ability to operate with wide range of fuels. In order to demonstrate this potential in this study the HCCI mode of operation is compared to the spark ignition mode of operation. The study aims to compare and characterise two different combustion modes on the same engine with different CR and different fuels at similar operating conditions. For that purpose the engine tests are performed at the same indicated mean effective pressures for the spark ignition and HCCI combustion mode at the same engine speed, while the tests are performed at three different engine speeds and three different loads. The measurements were performed on the experimental set-up that consists of single cylinder Diesel engine modified to enable operation in spark ignition and HCCI modes. The characterisation includes the comparison of in-cylinder pressure, temperature and rate of heat release obtained by spark ignition and homogeneous charge compression ignition combustion mode and presents comparisons of engine efficiencies and of emissions of HC, CO, and NOx.

Investigation of thermal stratification in premixed homogeneous charge compression ignition engines: A Large Eddy Simulation study

2018 ◽  
Vol 20 (8-9) ◽  
pp. 931-944
Author(s):  
Aimilios Sofianopoulos ◽  
Mozhgan Rahimi Boldaji ◽  
Benjamin Lawler ◽  
Sotirios Mamalis
Keyword(s):  
Heat Release ◽  
Thermal Stratification ◽  
Homogeneous Charge Compression Ignition ◽  
Working Fluid ◽  
Compression Ignition ◽  
Modeling Framework ◽  
Cyclic Variability ◽  
Large Eddy ◽  
Hcci Engines ◽  
Homogeneous Charge

The operating range of Homogeneous Charge Compression Ignition (HCCI) engines is limited to low and medium loads by high heat release rates. Negative valve overlap can be used to control ignition timing and heat release by diluting the mixture with residual gas and introducing thermal stratification. Cyclic variability in HCCI engines with NVO can result in reduced efficiency, unstable operation, and excessive pressure rise rates. Contrary to spark-ignition engines, where the sources of cyclic variability are well understood, there is a lack of understanding of the effects of turbulence on cyclic variability in HCCI engines and the dependence of cyclic variability on thermal stratification. A three-dimensional computational fluid dynamics (CFD) model of a 2.0L GM Ecotec engine cylinder, modified for HCCI combustion, was developed using Converge. Large Eddy Simulations (LES) were combined with detailed chemical kinetics for simulating the combustion process. Twenty consecutive cycles were simulated and the results were compared with individual cycle data of 300 consecutive experimental cycles. A verification approach based on the LES quality index indicated that this modeling framework can resolve more than 80% of the kinetic energy of the working fluid in the combustion chamber at the pre-ignition region. Lower cyclic variability was predicted by the LES model compared to the experiments. This difference is attributed to the resolution of the sub-grid velocity field, time averaging of the intake manifold pressure boundary conditions, and different variability in the equivalence ratio compared to the experimental data. Combustion phasing of each cycle was found to depend primarily on the bulk cylinder temperature, which agrees with established findings in the literature. Large cyclic variability of turbulent mixing and spatial distribution of temperature was predicted. However, both of these parameters were found to have a small effect on the cyclic variability of combustion phasing.

scholarly journals Performance and Emission Parameters of Homogeneous Charge Compression Ignition (HCCI) Engine: A Review

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3557 ◽  
Author(s):  
M. Mofijur ◽  
M.M. Hasan ◽  
T.M.I. Mahlia ◽  
S.M. Ashrafur Rahman ◽  
A.S. Silitonga ◽  
...  
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Engine Performance ◽  
Spark Ignition ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Combustion Mode ◽  
Performance And Emission ◽  
Hcci Combustion ◽  
Hcci Engines ◽  
Homogeneous Charge

Strict emission regulations and demand for better fuel economy are driving forces for finding advanced engines that will be able to replace the conventional internal combustion engines in the near future. Homogeneous charge compression ignition (HCCI) engines use a different combustion technique; there are no spark plugs or injectors to assist the combustion. Instead, when the mixtures reach chemical activation energy, combustion auto-ignites in multiple spots. The main objective of this review paper is to study the engine performance and emission characteristics of HCCI engines operating in various conditions. Additionally, the impact of different fuels and additives on HCCI engine performance is also evaluated. The study also introduces a potential guideline to improve engine performance and emission characteristics. Compared to conventional compression ignition and spark ignition combustion methods, the HCCI combustion mode is noticeably faster and also provides better thermal efficiency. Although a wide range of fuels including alternative and renewable fuels can be used in the HCCI mode, there are some limitation/challenges, such as combustion limited operating range, phase control, high level of noise, cold start, preparation of homogeneous charge, etc. In conclusion, the HCCI combustion mode can be achieved in existing spark ignition (SI) engines with minor adjustments, and it results in lower oxides of nitrogen (NOx) and soot emissions, with practically a similar performance as that of SI combustion. Further improvements are required to permit extensive use of the HCCI mode in future.

Sign in / Sign up

Export Citation Format

Share Document