Reference Stress Approach for Failure Strength Estimates of a Pipe With Local Wall Thinning

2005 ◽  
Author(s):  
Yun-Jae Kim ◽  
Young-Jin Kim
Keyword(s):  
Equivalent Stress ◽  
Fe Analysis ◽  
Creep Stress ◽  
Estimation Equations ◽  
Reference Stress ◽  
Wall Thinning ◽  
Approximate Estimation ◽  
Failure Loads ◽  
Reference Stress Approach ◽  
Local Wall Thinning

This paper proposes a method based on the reference stress a approach to estimate residual strength of a pipe with local wall thinning. The method is based on the equivalent stress averaged over the minimum ligament in the locally wall thinned region. Inspired by the reference stress method for approximate creep stress analysis, approximate estimation equations for the equivalent stress in the minimum ligament are proposed, which are then calibrated using detailed elastic-plastic 3-D FE analysis. The resulting estimation equations are found to be insensitive not only to pipe and defect geometries but also to material. Comparison of failure loads, predicted according to the proposed method, with published test data for corroded pipes shows excellent agreement.

Reference Stress Based Approach to Predict Failure Strength of Pipes With Local Wall Thinning Under Single Loading

2004 ◽  
Vol 126 (2) ◽  
pp. 194-201 ◽  
Author(s):  
Yun-Jae Kim ◽  
Do-Jun Shim ◽  
Hwan Lim ◽  
Young-Jin Kim
Keyword(s):  
Equivalent Stress ◽  
Three Dimensional ◽  
Failure Strength ◽  
Creep Stress ◽  
Estimation Equations ◽  
Reference Stress ◽  
Wall Thinning ◽  
Approximate Estimation ◽  
Failure Loads ◽  
Local Wall Thinning

This paper proposes a new method to estimate failure strength of a pipe with local wall thinning. The method is based on the equivalent stress averaged over the minimum ligament in the locally wall thinned region. The highlight of the proposed method is to propose a simple scheme to estimate the equivalent stress in the minimum ligament. Inspired by the reference stress method for approximate creep stress analysis, approximate estimation equations are proposed for the equivalent stress in the minimum ligament, which are then calibrated using detailed elastic-plastic three-dimensional FE analysis. Remarkably the resulting estimation equations are found to be insensitive not only to pipe and defect geometries but also to material. Comparison of failure loads, predicted according to the proposed method, with published test data for corroded pipes shows excellent agreement, which provides confidence in the use of the proposed method to assess local wall thinning in pipes. Furthermore, the proposed method is conceptually simple and thus easy to be extended to more complex situations.

Reference Stress Based Approach to Predict Failure Strength of Pipes With Local Wall Thinning Under Combined Loading

2005 ◽  
Vol 127 (1) ◽  
pp. 76-83 ◽  
Author(s):  
Do-Jun Shim ◽  
Young-Jin Kim ◽  
Yun-Jae Kim
Keyword(s):  
Internal Pressure ◽  
Equivalent Stress ◽  
New Method ◽  
Combined Loading ◽  
Failure Strength ◽  
Creep Stress ◽  
Reference Stress ◽  
Wall Thinning ◽  
Good Agreement ◽  
Local Wall Thinning

In the previous work carried out by the authors, a new method to estimate failure strength of a pipe with local wall thinning subject to either internal pressure or global bending has been proposed. The proposed method was based on the equivalent stress averaged over the minimum ligament in the locally wall thinned region, and the simple scheme to estimate the equivalent stress in the minimum ligament was proposed, based on the reference stress concept for creep stress analysis. This paper extends the new method to combined internal pressure and global bending. The proposed method is validated against FE results for various geometries of local wall thinning under combined loading. The effect of internal pressure is also investigated in the present study. Comparison of maximum moments, predicted according to the proposed method, with published full-scale pipe test data for locally wall thinned pipes under combined internal pressure and global bending, shows good agreement.

Engineering J Estimation Equations for Spent Fuel Canisters Under Combined Mechanical and Welding Residual Stresses

2018 ◽  
Author(s):  
Hyun-Jae Lee ◽  
Jae-Yoon Jeong ◽  
Yun-Jae Kim ◽  
Poh-Sang Lam
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Fe Analysis ◽  
Welding Residual Stress ◽  
Spent Fuel ◽  
Basic Form ◽  
Estimation Equations ◽  
Reference Stress ◽  
J Estimation

This paper provides engineering J estimation equations for Spent Fuel Canisters (SFCs) under combined mechanical and welding residual stress (WRS) fields. The basic form of estimation equations is reference stress-based ones as in R6. Interaction between mechanical (primary) and residual (secondary) stresses is treated using the V-factor. Based on systematic finite element (FE) analysis and J results, the V-factors for the combined mechanical and welding residual stresses are reported.

Creep Stress Analyses Affected by Defect Geometries on P91 Pipe With Local Wall Thinning Under High Temperature

2010 ◽  
Author(s):  
Jilin Xue ◽  
Changyu Zhou ◽  
Jian Peng
Keyword(s):  
High Temperature ◽  
Creep Strain ◽  
Power Plants ◽  
Creep Condition ◽  
Service Condition ◽  
Stress And Strain ◽  
Steel Pipes ◽  
Creep Stress ◽  
Wall Thinning ◽  
Local Wall Thinning

P91 heat-resistant steel pipes are widely used at high temperature in power plants and nuclear power plants. The service condition and manufacturing process may produce defects of local wall thinning, which may result in stress redistribution of the pipes during the service process at elevated temperature. For the purpose of understanding the creep stress and strain accumulation affected by local wall thinning geometries under creep condition, three groups of models were calculated, using three-dimensional models based on finite element analyses (FEA) codes ABAQUS. In this study, monotonic internal pressure was conducted on P91 full-scale steel pipes at 625°C, with local wall thinning located at the inner surface. Then, the creep strain and stress of pipes after 100,000h could be obtained corresponding to different models. Based on the analysis, the figures of creep stress and strain varying with defect geometries were plotted. Then, the stress and strain of pipes with local wall thinning affected by defect geometries, including different defect depths, different defect axial lengths and different defect hoop angles, were discussed. The results indicate that creep stress and creep strain increase with defect geometries. The variation laws have been summarized. The research results can provide the possibility on safety assessment and structure integrity analysis of the pipe with local wall thinning at high temperature effectively.

Creep Stress Analyses Affected by Load Properties on P91 Pipe with Local Wall Thinning under High Temperature

2011 ◽  
Vol 704-705 ◽  
pp. 1304-1309
Author(s):  
Ji Lin Xue ◽  
Chang Yu Zhou ◽  
Jian Peng
Keyword(s):  
High Temperature ◽  
Internal Pressure ◽  
Creep Strain ◽  
Power Plants ◽  
Creep Condition ◽  
Stress Redistribution ◽  
Stress And Strain ◽  
Creep Stress ◽  
Wall Thinning ◽  
Local Wall Thinning

The local wall thinning defect is very normal on pipes in power plants, which may result in stress redistribution of the pipes during the service process at elevated temperature. For the purpose of understanding the stress redistribution and strain accumulation of pipes with local wall thinning affected by load properties under creep condition, three groups of models were calculated, using three-dimensional elastic-plastic finite element analyses (FEA) based on FEA codes ABAQUS. In this study, the pipes has an identical defect of local wall thinning, the load properties and values are changed. Three groups of load properties, considering here, were monotonic internal pressure, monotonic moment and both internal pressure and moment, respectively. The numerical simulation conducted on P91 full-scale steel pipes at 625°C, with local wall thinning located at the inner surface. Then, von Mises stress and creep strain of pipes after 100,000h could be obtained corresponding to different models. Based on the analysis, the figures of creep stress and strain varying with load properties were plotted. Then, the stress and strain of pipes with local wall thinning affected by load properties were discussed. The results indicate that creep stress and creep strain increase with load properties. The variation laws have been summarized. The research results can provide the possibility on safety assessment and structure integrity analysis of the pipe with local wall thinning at high temperature effectively.

Characteristics of Strength and Deformation of Inner/Outer Local Wall Thinned Straight Pipes

2007 ◽  
Vol 353-358 ◽  
pp. 559-562 ◽  
Author(s):  
Seok Hwan Ahn ◽  
Kum Cheol Seok ◽  
Ki Woo Nam
Keyword(s):  
Fracture Behavior ◽  
Three Dimensional ◽  
Local Buckling ◽  
Fe Analysis ◽  
Metal Loss ◽  
Wall Thinning ◽  
Fracture Behaviors ◽  
Erosion Corrosion ◽  
Strength And Deformation ◽  
Local Wall Thinning

The experimental and the analysis for effects of circumferentially local wall thinning on the fracture behavior of pipes were carried out. Local wall thinning for experimental was machined on the outside of pipes in order to simulate the metal loss due to erosion/corrosion. In addition, the pipes with local wall thinning on the inside were carried out FE analysis, and it made a comparative study with that of outside. Failure mode could be classified into ovalization, local buckling and crack initiation depending on the thinned length and thinned ratio. Three-dimensional elasto-plastic analyses were able to accurately simulate fracture behaviors of inner/outer local wall thinning. Therefore the fracture behavior of the inner local wall thinning can be estimated with the outer local wall thinning.

Effect of Torsion on Collapse Bending Moment for 24-Inch Diameter Schedule 80 Pipes With Wall Thinning

2012 ◽  
Author(s):  
Kunio Hasegawa ◽  
Yinsheng Li ◽  
Bostjan Bezensek ◽  
Phuong Hoang
Keyword(s):  
Power Plants ◽  
Bending Moment ◽  
Combined Loading ◽  
Bending Moments ◽  
Compressive Stresses ◽  
Wall Thinning ◽  
Nominal Thickness ◽  
Calculation Results ◽  
Loading Modes ◽  
Local Wall Thinning

Piping items in power plants may experience combined bending and torsion moments during operation. Currently, there is a lack of guidance in the ASME B&PV Code Section XI for combined loading modes including pressure, torsion and bending. Finite element analyses were conducted for 24-inch diameter Schedule 80 pipes with local wall thinning subjected to tensile and compressive stresses. Plastic collapse bending moments were calculated under constant torsion moments. From the calculation results, it can be seen that collapse bending moment for pipes with local thinning subjected to tensile stress is smaller than that subjected to compressive stress. In addition, equivalent moment is defined as the root the sum of the squares of the torsion and bending moments. It is found that the equivalent moments can be approximated with the pure bending moments, when the wall thinning length is equal or less than 7.73R·t for the wall thinning depth of 75% of the nominal thickness, where R is the mean radius and t is the wall thickness of the pipe.

Plastic loads of elbows with local wall thinning under in-plane bending

2007 ◽  
Vol 145 (1) ◽  
pp. 63-79 ◽  
Author(s):  
Chang-Sik Oh ◽  
Yun-Jae Kim ◽  
Chi-Yong Park
Keyword(s):  
Wall Thinning ◽  
Plane Bending ◽  
Local Wall Thinning

Technical Basis for Application of Collapse Moments for Locally Thinned Pipes Subjected to Torsion and Bending Proposed for ASME Section XI

2014 ◽  
Author(s):  
Kunio Hasegawa ◽  
Yinsheng Li ◽  
Bostjan Bezensek ◽  
Phuong H. Hoang ◽  
Howard J. Rathbun
Keyword(s):  
Power Plants ◽  
Bending Moments ◽  
Finite Element Analyses ◽  
Pure Bending ◽  
Plastic Bending ◽  
Evaluation Procedures ◽  
Wall Thinning ◽  
Applicable Range ◽  
Technical Basis ◽  
Local Wall Thinning

Piping components in power plants may experience combined bending and torsion moments during operation. There is a lack of guidance for pipe evaluation for pipes with local wall thinning flaws under the combined bending and torsion moments. ASME B&PV Code Section XI Working Group is currently developing fully plastic bending pipe evaluation procedures for pressurized piping components containing local wall thinning subjected to combined torsion and bending moments. Using elastic fully plastic finite element analyses, plastic collapse bending moments under torsions were obtained for 4 (114.3) to 24 (609.6) inch (mm) diameter pipes with various local wall thinning flaw sizes. The objective of this paper is to introduce an equivalent moment, which combines torsion and bending moments by a vector summation, and to establish the applicable range of wall thinning lengths, angles and depths, where the equivalent moments are equal to pure bending moments.

Sign in / Sign up

Export Citation Format

Share Document