Emergency Core Cooling System Sump Strainer Fibre Bypass Testing and Measurement

2016 ◽  
Author(s):  
Qingwu Cheng ◽  
Harry Adams ◽  
Metin Yetisir
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Cooling System ◽  
Reactor Core ◽  
Regulatory Requirements ◽  
Pressurized Water ◽  
Load Pressure ◽  
Analysis Techniques ◽  
Core Cooling

The potential of losing post-Loss Of Coolant Accident (LOCA) recirculation capability due to debris blockage of Emergency Core Cooling (ECC) strainers resulted in early replacements of ECC strainers in most nuclear power plants. To validate the performance of ECC strainers, extensive testing representing plant conditions is required. Such testing programs include thin-bed and full debris load pressure drop tests, fibre bypass tests and chemical effects tests. Multiple testing loops and state-of-the-art analysis techniques have provided in-depth understanding of sump strainer performance and the effect of chemical precipitation on debris bed head loss. ECC strainers typically use perforated plates as filtering surfaces with 1.6 to 2.5 mm holes and 35 to 40% open area, allowing some particulates and fibres to pass through the strainer filtering surfaces. Recently, the bypassed fibrous debris has been identified as a potential safety concern due to its possible deposition in the reactor core and blocking of flow into fuel assemblies. In some cases, the amount of fibre that is specified as allowed to enter a reactor core is only 15 g per fuel assembly for pressurized water reactors. Characterization and quantification of bypassed fibre debris for nuclear power plants are needed to address regulatory requirements. Testing methodology and analysis techniques to address regulatory requirements and concerns are presented in this paper. In particular, a newly developed technique is presented to address debris bypass quantification.

scholarly journals Early quantification of reliability for a safety critical and control system: a case study of reactor core cooling system

2018 ◽  
Vol 7 (2.12) ◽  
pp. 248
Author(s):  
Vinay Kumar ◽  
Suraj Gupta ◽  
Anil Kumar Tripathi
Keyword(s):  
Control System ◽  
Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Cooling System ◽  
Reactor Core ◽  
Safety Critical ◽  
Core Cooling ◽  
And Control

Using Probabilistic Reliability analysis for Quantifying reliability of a system is already a common practice in Reliability Engineering community. This method plays an important role in analyzing reliability of nuclear plants and its various components. In Nuclear Power Plants Reactor Core Cooling System is a component of prime importance as its breakdown can disrupt Cooling System of power plant. In this paper, we present a framework for early quantification of Reliability and illustrated with a Safety Critical and Control System as case study which runs in a Nuclear Power Plant.  

Development of Best-Estimate ECCS Evaluation Methodology for APR1400

2009 ◽  
Author(s):  
Seok-Ho Lee ◽  
Mun-Soo Kim ◽  
Han-Gon Kim
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Cooling System ◽  
Evaluation Methodology ◽  
Preliminary Calculation ◽  
Pressurized Water ◽  
Water Storage Tank ◽  
Best Estimate ◽  
Design Characteristics ◽  
Core Cooling

Advanced Power Reactor 1400 (APR1400) is an evolutionary Pressurized Water Reactor (PWR) equipped with such advanced features as the Direct Vessel Injection (DVI), the Fluidic Device (FD) in the Safety Injection Tank (SIT), and the In-containment Refueling Water Storage Tank (IRWST) in the Emergency Core Cooling System (ECCS). To verify the performance of these advanced features, more realistic performance evaluation methodology is desired since existing methodologies use too conservative assumptions which cause negative biases to these features. In this study, therefore, a best estimate evaluation methodology for the APR1400 ECCS under large break loss of cooling accident (LBLOCA) is developed targeting operating license of the Shin Kori 3&4 nuclear power plants (SKN 3&4), the first commercial APR1400 plants. On this purpose, a variety of existing best estimate evaluation methodologies previously used are reviewed. As a result of this review, a methodology named KREM is selected for this study. The KREM is based on RELAP5/MOD3.1K and has been used for Korean operating plants since 2002 when it was first approved by Korean regulation. For this study, RELAP5/MOD3.3 (Patch 3), the latest version of RELAP series is selected since it could appropriately simulate the multi-dimensional phenomena for the APR1400 design characteristics. To quantify the code accuracy, analyses covering experimental data have been performed for 36 kinds of separated effect tests (SETs) and integral effect tests (IETs). The uncertainty in the peak cladding temperature (PCT) of the APR1400 is evaluated preliminarily. Based on the preliminary calculation, final uncertainty quantification and bias evaluation are performed to obtain the licensing PCT for Shin-Kori 3&4 plants and the result shows that the LBLOCA licensing acceptance criteria are well satisfied.

Experiments and Analytical Simulation Work on an Innovative Steam-Injector-Driven Passive Core Injection Cooling System

2007 ◽  
Author(s):  
Michitsugu Mori ◽  
Tadashi Narabayashi ◽  
Shuichi Ohmori ◽  
Fumitoshi Watanabe
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
High Pressures ◽  
Cooling System ◽  
Steam Pressure ◽  
Injection System ◽  
The Core ◽  
Coolant Injection ◽  
Core Cooling

A Steam Injector (SI) is a simple, compact, passive pump which also functions as a high-performance direct-contact compact heater. We are developing this innovative concept by applying the SI system to core injection systems in Emergency Core Cooling Systems (ECCS) to further improve the safety of nuclear power plants. Passive ECCS in nuclear power plants would be inherently very safe and would prevent serious accidents by keeping the core covered with water (Severe Accident-Free Concept). The Passive Core Coolant Injection System driven by a high-efficiency SI is one that, in an accident such as a loss of coolant accident (LOCA), attains a higher discharge pressure than the supply steam pressure used to inject water into the reactor by operating the SI using water stored in the pool as the water supply source and steam contained in the reactor as the source of pressurization energy. The passive SI equipment would replace large, rotating machines such as pumps and motors, so eliminating the possibility of such equipment failing. In this Si-driven Passive Core Coolant Injection System (SI-PCIS), redundancy will be provided to ensure that the water and steam supply valves to the SI open reliably, and when the valves open, the SI will automatically start to inject water into the core to keep the core covered with water. The SI used in SI-PCIS works for a range of steam pressure conditions, from atmosphere pressure through to high pressures, as confirmed by analytical simulations which were done based on comprehensive experimental data obtained using reduced scale SI. We did further simulations and evaluations of the core cooling and coolant injection performance of SI-PCIS in BWR using RETRAN-3D code, developed using EPRI and other utilities, for the case of small LOCA. Reactors equipped with passive safety systems — the gravity-driven core cooling/injection system (GDCS) and depressurization valves (DPV) — would inevitably end up having large LOCA, even if they are initially small LOCA, as depressurization valves are forcibly opened in order to inject coolant from the GDCS pool to the GDCS water head at up to ∼0.2MPa. On the other hand, our simulation demonstrated that SI-PCIS could prevent large LOCA occurring in reactors by having by coolant discharged into the core in the event of small LOCA or when DPV unexpectedly open.

Expectations for Inservice Testing Programs at New Nuclear Power Plants

2017 ◽  
Author(s):  
Thomas G. Scarbrough
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Reactor Core ◽  
Nuclear Regulatory Commission ◽  
Lessons Learned ◽  
Mechanical Equipment ◽  
American Society ◽  
Regulatory Commission ◽  
Safety Systems

In a series of Commission papers, the U.S. Nuclear Regulatory Commission (NRC) described its policy for inservice testing (IST) programs to be developed and implemented at nuclear power plants licensed under 10 CFR Part 52. This paper discusses the expectations for IST programs based on those Commission policy papers as applied in the NRC staff review of combined license (COL) applications for new reactors. For example, the design and qualification of pumps, valves, and dynamic restraints through implementation of American Society of Mechanical Engineers (ASME) Standard QME-1-2007, “Qualification of Active Mechanical Equipment Used in Nuclear Power Plants,” as accepted in NRC Regulatory Guide (RG) 1.100 (Revision 3), “Seismic Qualification of Electrical and Active Mechanical Equipment and Functional Qualification of Active Mechanical Equipment for Nuclear Power Plants,” will enable IST activities to assess the operational readiness of those components to perform their intended functions. ASME has updated the Operation and Maintenance of Nuclear Power Plants (OM Code) to improve the IST provisions for pumps, valves, and dynamic restraints that are incorporated by reference in the NRC regulations with applicable conditions. In addition, lessons learned from performance experience and testing of motor-operated valves (MOVs) will be implemented as part of the IST programs together with application of those lessons learned to other power-operated valves (POVs). Licensee programs for the Regulatory Treatment of Non-Safety Systems (RTNSS) will be implemented for components in active nonsafety-related systems that are the first line of defense in new reactors that rely on passive systems to provide reactor core and containment cooling in the event of a plant transient. This paper also discusses the overlapping testing provisions specified in ASME Standard QME-1-2007; plant-specific inspections, tests, analyses, and acceptance criteria; the applicable ASME OM Code as incorporated by reference in the NRC regulations; specific license conditions; and Initial Test Programs as described in the final safety analysis report and applicable RGs. Paper published with permission.

The analysis of emergency situations related to fires at nuclear power plants

2021 ◽  
Vol 30 (5) ◽  
pp. 66-75
Author(s):  
S. A. Titov ◽  
N. M. Barbin ◽  
A. M. Kobelev
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Emergency Situations ◽  
The Usa ◽  
Large Fires ◽  
Short Circuits ◽  
Nuclear Reactor Core

Introduction. The article provides a system and statistical analysis of emergency situations associated with fires at nuclear power plants (NPPs) in various countries of the world for the period from 1955 to 2019. The countries, where fires occurred at nuclear power plants, were identified (the USA, Great Britain, Switzerland, the USSR, Germany, Spain, Japan, Russia, India and France). Facilities, exposed to fires, are identified; causes of fires are indicated. The types of reactors where accidents and incidents, accompanied by large fires, have been determined.The analysis of major emergency situations at nuclear power plants accompanied by large fires. During the period from 1955 to 2019, 27 large fires were registered at nuclear power plants in 10 countries. The largest number of major fires was registered in 1984 (three fires), all of them occurred in the USSR. Most frequently, emergency situations occurred at transformers and cable channels — 40 %, nuclear reactor core — 15 %, reactor turbine — 11 %, reactor vessel — 7 %, steam pipeline systems, cooling towers — 7 %. The main causes of fires were technical malfunctions — 33 %, fires caused by the personnel — 30 %, fires due to short circuits — 18 %, due to natural disasters (natural conditions) — 15 % and unknown reasons — 4 %. A greater number of fires were registered at RBMK — 6, VVER — 5, BWR — 3, and PWR — 3 reactors.Conclusions. Having analyzed accidents, involving large fires at nuclear power plants during the period from 1955 to 2019, we come to the conclusion that the largest number of large fires was registered in the USSR. Nonetheless, to ensure safety at all stages of the life cycle of a nuclear power plant, it is necessary to apply such measures that would prevent the occurrence of severe fires and ensure the protection of personnel and the general public from the effects of a radiation accident.

scholarly journals Calculation of Potential Radiation Doses Associated with Predisposal Management of Dismantled Steam Generators from Nuclear Power Plants

2020 ◽  
Vol 12 (12) ◽  
pp. 5149
Author(s):  
Ga Hyun Chun ◽  
Jin-ho Park ◽  
Jae Hak Cheong
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Radiation Doses ◽  
Steam Generators ◽  
Pressurized Water ◽  
Water Reactor ◽  
General Pathway ◽  
Heavy Water Reactor ◽  
Past Experiences

Although the generation of large components from nuclear power plants is expected to gradually increase in the future, comprehensive studies on the radiological risks of the predisposal management of large components have been rarely reported in open literature. With a view to generalizing the assessment framework for the radiological risks of the processing and transport of a representative large component—a steam generator—12 scenarios were modeled in this study based on past experiences and practices. In addition, the general pathway dose factors normalized to the unit activity concentration of radionuclides for processing and transportation were derived. Using the general pathway dose factors, as derived using the approach established in this study, a specific assessment was conducted for steam generators from a pressurized water reactor (PWR) or a pressurized heavy water reactor (PHWR) in Korea. In order to demonstrate the applicability of the developed approach, radiation doses reported from actual experiences and studies are compared to the calculated values in this study. The applicability of special arrangement transportation of steam generators assumed in this study is evaluated in accordance with international guidance. The generalized approach to assessing the radiation doses can be used to support optimizing the predisposal management of large components in terms of radiological risk.

scholarly journals Small nuclear power plants for power supply in arctic regions: assessment of spent nuclear fuel radioactivity

2018 ◽  
Vol 4 (2) ◽  
pp. 119-125
Author(s):  
Vadim Naumov ◽  
Sergey Gusak ◽  
Andrey Naumov
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fuel Cycle ◽  
Mass Composition ◽  
Published Data ◽  
Pressurized Water ◽  
Fuel Cycles ◽  
Reactor Cores

The purpose of the present study is the investigation of mass composition of long-lived radionuclides accumulated in the fuel cycle of small nuclear power plants (SNPP) as well as long-lived radioactivity of spent fuel of such reactors. Analysis was performed of the published data on the projects of SNPP with pressurized water-cooled reactors (LWR) and reactors cooled with Pb-Bi eutectics (SVBR). Information was obtained on the parameters of fuel cycle, design and materials of reactor cores, thermodynamic characteristics of coolants of the primary cooling circuit for reactor facilities of different types. Mathematical models of fuel cycles of the cores of reactors of ABV, KLT-40S, RITM-200M, UNITERM, SVBR-10 and SVBR-100 types were developed. The KRATER software was applied for mathematical modeling of the fuel cycles where spatial-energy distribution of neutron flux density is determined within multi-group diffusion approximation and heterogeneity of reactor cores is taken into account using albedo method within the reactor cell model. Calculation studies of kinetics of burnup of isotopes in the initial fuel load (235U, 238U) and accumulation of long-lived fission products (85Kr, 90Sr, 137Cs, 151Sm) and actinoids (238,239,240,241,242Pu, 236U, 237Np, 241Am, 244Cm) in the cores of the examined SNPP reactor facilities were performed. The obtained information allowed estimating radiation characteristics of irradiated nuclear fuel and implementing comparison of long-lived radioactivity of spent reactor fuel of the SNPPs under study and of their prototypes (nuclear propulsion reactors). The comparison performed allowed formulating the conclusion on the possibility in principle (from the viewpoint of radiation safety) of application of SNF handling technology used in prototype reactors in the transportation and technological process layouts of handling SNF of SNPP reactors.

scholarly journals Thermal Hydraulic Analysis of a Nuclear Reactor due to Loss of Coolant Accident with and without Emergency Core Cooling System

2020 ◽  
Vol 01 (02) ◽  
pp. 53-60
Author(s):  
Pronob Deb Nath ◽  
Kazi Mostafijur Rahman ◽  
Md. Abdullah Al Bari
Keyword(s):  
Nuclear Reactor ◽  
Cooling System ◽  
Computational Study ◽  
Reactor Core ◽  
Primary Circuit ◽  
Feed Water ◽  
Pressurized Water ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling

This paper evaluates the thermal hydraulic behavior of a pressurized water reactor (PWR) when subjected to the event of Loss of Coolant Accident (LOCA) in any channel surrounding the core. The accidental break in a nuclear reactor may occur to circulation pipe in the main coolant system in a form of small fracture or equivalent double-ended rupture of largest pipe connected to primary circuit line resulting potential threat to other systems, causing pressure difference between internal parts, unwanted core shut down, explosion and radioactivity release into environment. In this computational study, LOCA for generation III+ VVER-1200 reactor has been carried out for arbitrary break at cold leg section with and without Emergency Core Cooling System (ECCS). PCTRAN, a thermal hydraulic model-based software developed using real data and computational approach incorporating reactor physics and control system was employed in this study. The software enables to test the consequences related to reactor core operations by monitoring different operating variables in the system control bar. Two types of analysis were performed -500% area break at cold leg pipe due to small break LOCA caused by malfunction of the system with and without availability of ECCS. Thermal hydraulic parameters like, coolant dynamics, heat transfer, reactor pressure, critical heat flux, temperature distribution in different sections of reactor core have also been investigated in the simulation. The flow in the reactor cooling system, steam generators steam with feed-water flow, coolant steam flow through leak level of water in different section, power distribution in core and turbine were plotted to analyze their behavior during the operations. The simulation showed that, LOCA with unavailability of Emergency Core Cooling System (ECCS) resulted in core meltdown and release of radioactivity after a specific time.

Sign in / Sign up

Export Citation Format

Share Document