Experimental Investigations of the Burning Behaviour of Transport Package Impact Limiters and of Fire Spread Impact Onto the Cask

2018 ◽  
Author(s):  
Marina Erenberg ◽  
Claus Bletzer ◽  
Martin Feldkamp ◽  
André Musolff ◽  
Marko Nehrig ◽  
...  
Keyword(s):  
Large Scale ◽  
Fire Test ◽  
Spent Nuclear Fuel ◽  
Safety Evaluation ◽  
Fire Spread ◽  
High Level Waste ◽  
Experimental Investigations ◽  
Thermal Testing ◽  
Steel Sheets ◽  
The Impact

Accident safe packages for the transport of spent nuclear fuel and high-level waste shall fulfil international IAEA safety requirements. Compliance is shown by consecutive mechanical and thermal testing. Additional numerical analysis are usually part of the safety evaluation. For damage protection some package designs are equipped with wood filled impact limiters encapsulated by steel sheets. The safety of these packages is established in compliance with IAEA regulations. Cumulative mechanical and fire tests are conducted to achieve safety standards and to prevent loss of containment. Mechanical reliability is proven by drop tests. Drop testing might cause significant damage of the impact limiter steel sheets and might enable sufficient oxygen supply to the impact limiter during the fire test to ignite the wood filling. The boundary conditions of the fire test are precisely described in the IAEA regulatory. During the test the impact limiter will be subjected to a 30 minute enduring fire phase. Subsequent to the fire phase any burning of the specimen has to extinguish naturally and no artificial cooling is allowed. At BAM a large-scale fire test with a real size impact limiter and a wood volume of about 3m3 was conducted to investigate the burning behaviour of wood filled impact limiters in steel sheet encapsulation. The impact limiter was equipped with extensive temperature monitoring equipment. Until today burning of such impact limiters is not sufficiently considered in transport package design and more investigation is necessary to explore the consequences of the impacting fire. The objective of the large scale test was to find out whether a self-sustaining smouldering or even a flaming fire inside the impact limiter was initiated and what impact on the cask is resulting. The amount of energy, transferred from the impact limiter into the cask is of particular importance for the safety of heavy weight packages. With the intention of heat flux quantification a new approach was made and a test bench was designed.

scholarly journals Development of a ceramic waste form for high-level waste disposal

1999 ◽  
Vol 556 ◽  
Author(s):  
D. W. Esh ◽  
K. M. Goff ◽  
K. T. Hirsche ◽  
T. J. Battisti ◽  
M. F. Simpson ◽  
...  
Keyword(s):  
Spent Nuclear Fuel ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Fission Products ◽  
Waste Form ◽  
High Level Waste ◽  
Durability Test ◽  
Ceramic Waste ◽  
High Level ◽  
The Impact

AbstractA ceramic waste form is being developed by Argonne National Laboratory* (ANL) as part of the demonstration of the electrometallurgical treatment of spent nuclear fuel [1]. The halide, alkaline earth, alkali, transuranic, and rare earth fission products are stabilized in zeolite which is combined with glass and processed in a hot isostatic press (HIP) to form a ceramic composite. The mineral sodalite is formed in the HIP from the zeolite precursor. The process, from starting materials to final product, is relatively simple. An overview of the processing operations is given. The metrics that have been developed to measure the success or completion of processing operations are developed and discussed. The impact of variability in processing metrics on the durability of the final product is presented. The process is demonstrated to be robust for the type and range of operation metrics considered and the performance metric (PCT durability test) against which the operation metrics are evaluated.

An Overview of Risk Management Planning for Hot-Isostatic Pressure Treatment of High-Level Waste Calcine for the Idaho Cleanup Project

2012 ◽  
Author(s):  
Brian D. Preussner ◽  
Joseph A. Nenni ◽  
Vondell J. Balls
Keyword(s):  
Risk Management ◽  
Systems Engineering ◽  
Large Scale ◽  
Spent Nuclear Fuel ◽  
Waste Form ◽  
High Level Waste ◽  
Simultaneous Application ◽  
Time And Motion ◽  
High Level ◽  
Hip Process

The Calcine Disposition Project (CDP) of the Idaho Cleanup Project (ICP) has the responsibility to retrieve, treat, and dispose of the calcine stored at the Idaho Nuclear Technology and Engineering Center (INTEC) located at the Idaho National Laboratory. Calcine is the granular product of thermally treating, or calcining liquid high-level waste (HLW) that was produced at INTEC during the reprocessing of spent nuclear fuel (SNF) to recover uranium. The CDP is currently designing the Hot Isostatic Pressure (HIP) treatment for the calcine to provide monolithic, glass-ceramic waste form suitable for transport and disposition outside of Idaho by 2035 in compliance with the Idaho Settlement Agreement. The HIP process has been used by industry since its invention, by Battelle Institute, in 1955. Hot isostatic pressing can be used for upgrading castings, densifying pre-sintered components, and consolidate powders. It involves the simultaneous application of a high pressure and temperature in a specially constructed vessel. The pressure is applied on all sides with a gas (usually inert) and, so, is isostatic. The CDP will use this treatment process (10,000 psi at 1,150 C) to combine physically and chemically a mixture of calcine and granular additives into a non leachable waste-form. The HIP process for calcine involves filling a metal can with calcine and additives, heating and evacuating the can to remove volatiles, sealing the can under vacuum, and placing the can within the HIP machine for treatment. Although the HIP process has been in use for over 50 years it has not been applied in large scale radioactive service. Challenges with retrofitting such a system for Calcine treatment include 1) filling and sealing the HIP can cleanly and remotely, 2) remotely loading and unloading the HIP machine, and 3) performing maintenance and repair on a 300 ton, hydraulically actuated machine in a highly radioactive hot cell environment. In this article, a systems engineering approach, including use of industry-proven design-for-quality tools and quantitative assessment techniques is summarized. Discussions on how these techniques were used to improve high-consequence risk management and more effectively apply failure mode, RAMI, and time and motion analyses at the earliest possible stages of design are provided.

Preliminary Safety Evaluation of an Aircraft Impact on a Near-Surface Radioactive Waste Repository

2013 ◽  
Author(s):  
R. Lo Frano ◽  
G. Forasassi ◽  
G. Pugliese
Keyword(s):  
Radioactive Waste ◽  
Large Scale ◽  
Safety Evaluation ◽  
Design Guidelines ◽  
Stress Tests ◽  
Structural Effects ◽  
Concrete Wall ◽  
Near Surface ◽  
Impulsive Loads ◽  
The Impact

The aircraft impact accident has become very significant in the design of a nuclear facilities, particularly, after the tragic September 2001 event, that raised the public concern about the potential damaging effects that the impact of a large civilian airplane could bring in safety relevant structures. The aim of this study is therefore to preliminarily evaluate the global response and the structural effects induced by the impact of a military or commercial airplane (actually considered as a “beyond design basis” event) into a near surface radioactive waste (RWs) disposal facility. The safety evaluation was carried out according to the International safety and design guidelines and in agreement with the stress tests requirements for the security track. To achieve the purpose, a lay out and a scheme of a possible near surface repository, like for example those of the El Cabril one, were taken into account. In order to preliminarily perform a reliable analysis of such a large-scale structure and to determine the structural effects induced by such a types of impulsive loads, a realistic, but still operable, numerical model with suitable materials characteristics was implemented by means of FEM codes. In the carried out structural analyses, the RWs repository was considered a “robust” target, due to its thicker walls and main constitutive materials (steel and reinforced concrete). In addition to adequately represent the dynamic response of repository under crashing, relevant physical phenomena (i.e. penetration, spalling, etc.) were simulated and analysed. The preliminary assessment of the effects induced by the dynamic/impulsive loads allowed generally to verify the residual strength capability of the repository considered. The obtained preliminary results highlighted a remarkable potential to withstand the impact of military/large commercial aircrafts, even in presence of ongoing concrete progressive failure (some penetration and spalling of the concrete wall) of the impacted area.

scholarly journals The circulation of the Mediterranean Sea: a historical review of experimental investigations

2010 ◽  
Vol 1 (1) ◽  
pp. 11 ◽  
Author(s):  
A. Bergamasco ◽  
P. Malanotte-Rizzoli
Keyword(s):  
Mediterranean Sea ◽  
Large Scale ◽  
Thermohaline Circulation ◽  
World Ocean ◽  
Historical Review ◽  
Atlantic Water ◽  
Experimental Investigations ◽  
Basin Scale ◽  
The Mediterranean ◽  
The Impact

The Mediterranean Sea is an enclosed basin composed of two similar basins and different sub-basins. It is a concentration basin, where evaporation exceeds precipitation. In the surface layer there is an inflow of Atlantic water which is modified along its path to the Eastern basin. This transformation occurs through surface heat loss and evaporation specifically in the Levantine basin. The Mediterranean is furthermore the site of water mass formation processes, which can be studied experimentally because of their easy accessibility. There are two main reasons why the Mediterranean is important. The first one is the impact of the Mediterranean on the global thermohaline circulation, the second reason is that the Mediterranean basin can be considered as Laborartory for investigating processes occurring on the global scale of the world ocean. In this paper we want to provide a short historical review of the evolving knowledge of the Mediterranean circulation that has emerged from experimental investigations over the last decades. We start by describing the old picture of the basin circulation which had stationary, smooth large scale patterns. Then we show the major experiments that led to the discovery of the sub-basin scale circulation and its mesoscale features. We conclude with the dynamical discovery of EMT in the 1990s and the most exciting ongoing new research programmes.

Impact of COVID-19 on Nuclear Medicine in Germany, Austria and Switzerland: An International Survey in April 2020

2020 ◽  
Vol 59 (04) ◽  
pp. 294-299 ◽  
Author(s):  
Lutz S. Freudenberg ◽  
Ulf Dittmer ◽  
Ken Herrmann
Keyword(s):  
Nuclear Medicine ◽  
Health Systems ◽  
Personal Protective Equipment ◽  
Large Scale ◽  
Diagnostic Procedures ◽  
Protective Equipment ◽  
Current Crisis ◽  
Web Based ◽  
Public Versus Private ◽  
The Impact

Abstract Introduction Preparations of health systems to accommodate large number of severely ill COVID-19 patients in March/April 2020 has a significant impact on nuclear medicine departments. Materials and Methods A web-based questionnaire was designed to differentiate the impact of the pandemic on inpatient and outpatient nuclear medicine operations and on public versus private health systems, respectively. Questions were addressing the following issues: impact on nuclear medicine diagnostics and therapy, use of recommendations, personal protective equipment, and organizational adaptations. The survey was available for 6 days and closed on April 20, 2020. Results 113 complete responses were recorded. Nearly all participants (97 %) report a decline of nuclear medicine diagnostic procedures. The mean reduction in the last three weeks for PET/CT, scintigraphies of bone, myocardium, lung thyroid, sentinel lymph-node are –14.4 %, –47.2 %, –47.5 %, –40.7 %, –58.4 %, and –25.2 % respectively. Furthermore, 76 % of the participants report a reduction in therapies especially for benign thyroid disease (-41.8 %) and radiosynoviorthesis (–53.8 %) while tumor therapies remained mainly stable. 48 % of the participants report a shortage of personal protective equipment. Conclusions Nuclear medicine services are notably reduced 3 weeks after the SARS-CoV-2 pandemic reached Germany, Austria and Switzerland on a large scale. We must be aware that the current crisis will also have a significant economic impact on the healthcare system. As the survey cannot adapt to daily dynamic changes in priorities, it serves as a first snapshot requiring follow-up studies and comparisons with other countries and regions.

HOME VISITS DURING THE FIRST MONTH OF DELIVERY FOR RECENTLY DELIVERED WOMEN IN UTTAR PRADESH, INDIA

2020 ◽  
Vol 6 (5) ◽  
pp. 1183-1189
Author(s):  
Dr. Tridibesh Tripathy ◽  
Dr. Umakant Prusty ◽  
Dr. Chintamani Nayak ◽  
Dr. Rakesh Dwivedi ◽  
Dr. Mohini Gautam
Keyword(s):  
Large Scale ◽  
National Level ◽  
Uttar Pradesh ◽  
Life Time ◽  
Structured Interview ◽  
The Other ◽  
Registration System ◽  
Action Group ◽  
Current Article ◽  
The Impact

The current article of Uttar Pradesh (UP) is about the ASHAs who are the daughters-in-law of a family that resides in the same community that they serve as the grassroots health worker since 2005 when the NRHM was introduced in the Empowered Action Group (EAG) states. UP is one such Empowered Action Group (EAG) state. The current study explores the actual responses of Recently Delivered Women (RDW) on their visits during the first month of their recent delivery. From the catchment area of each of the 250 ASHAs, two RDWs were selected who had a child in the age group of 3 to 6 months during the survey. The response profiles of the RDWs on the post- delivery first month visits are dwelled upon to evolve a picture representing the entire state of UP. The relevance of the study assumes significance as detailed data on the modalities of postnatal visits are available but not exclusively for the first month period of their recent delivery. The details of the post-delivery first month period related visits are not available even in large scale surveys like National Family Health Survey 4 done in 2015-16. The current study gives an insight in to these visits with a five-point approach i.e. type of personnel doing the visit, frequency of the visits, visits done in a particular week from among those four weeks separately for the three visits separately. The current study is basically regarding the summary of this Penta approach for the post- delivery one-month period.     The first month period after each delivery deals with 70% of the time of the postnatal period & the entire neonatal period. Therefore, it does impact the Maternal Mortality Rate & Ratio (MMR) & the Neonatal Mortality Rates (NMR) in India and especially in UP through the unsafe Maternal & Neonatal practices in the first month period after delivery. The current MM Rate of UP is 20.1 & MM Ratio is 216 whereas the MM ratio is 122 in India (SRS, 2019). The Sample Registration System (SRS) report also mentions that the Life Time Risk (LTR) of a woman in pregnancy is 0.7% which is the highest in the nation (SRS, 2019). This means it is very risky to give birth in UP in comparison to other regions in the country (SRS, 2019). This risk is at the peak in the first month period after each delivery. Similarly, the current NMR in India is 23 per 1000 livebirths (UNIGME,2018). As NMR data is not available separately for states, the national level data also hold good for the states and that’s how for the state of UP as well. These mortalities are the impact indicators and such indicators can be reduced through long drawn processes that includes effective and timely visits to RDWs especially in the first month period after delivery. This would help in making their post-natal & neonatal stage safe. This is the area of post-delivery first month visit profile detailing that the current article helps in popping out in relation to the recent delivery of the respondents.   A total of four districts of Uttar Pradesh were selected purposively for the study and the data collection was conducted in the villages of the respective districts with the help of a pre-tested structured interview schedule with both close-ended and open-ended questions.  The current article deals with five close ended questions with options, two for the type of personnel & frequency while the other three are for each of the three visits in the first month after the recent delivery of respondents. In addition, in-depth interviews were also conducted amongst the RDWs and a total 500 respondents had participated in the study.   Among the districts related to this article, the results showed that ASHA was the type of personnel who did the majority of visits in all the four districts. On the other hand, 25-40% of RDWs in all the 4 districts replied that they did not receive any visit within the first month of their recent delivery. Regarding frequency, most of the RDWs in all the 4 districts received 1-2 times visits by ASHAs.   Regarding the first visit, it was found that the ASHAs of Barabanki and Gonda visited less percentage of RDWs in the first week after delivery. Similarly, the second visit revealed that about 1.2% RDWs in Banda district could not recall about the visit. Further on the second visit, the RDWs responded that most of them in 3 districts except Gonda district did receive the second postnatal visit in 7-15 days after their recent delivery. Less than half of RDWs in Barabanki district & just more than half of RDWs in Gonda district received the third visit in 15-21 days period after delivery. For the same period, the majority of RDWs in the rest two districts responded that they had been entertained through a home visit.

The Impact of Quantitative Easing on Emerging Markets – Literature Review

e-Finanse ◽  
2018 ◽  
Vol 14 (4) ◽  
pp. 67-76
Author(s):  
Piotr Bartkiewicz
Keyword(s):  
Emerging Markets ◽  
Large Scale ◽  
Empirical Literature ◽  
Quantitative Easing ◽  
Methodological Choices ◽  
The Subject ◽  
Methodological Approaches ◽  
The Impact ◽  
Sufficient Precision

AbstractThe article presents the results of the review of the empirical literature regarding the impact of quantitative easing (QE) on emerging markets (EMs). The subject is of interest to policymakers and researchers due to the increasingly larger role of EMs in the world economy and the large-scale capital flows occurring after 2009. The review is conducted in a systematic manner and takes into consideration different methodological choices, samples and measurement issues. The paper puts the summarized results in the context of transmission channels identified in the literature. There are few distinct methodological approaches present in the literature. While there is a consensus regarding the direction of the impact of QE on EMs, its size and durability have not yet been assessed with sufficient precision. In addition, there are clear gaps in the empirical findings, not least related to relative underrepresentation of the CEE region (in particular, Poland).

Dietary Patterns: A New Therapeutic Approach for Depression?

2019 ◽  
Vol 20 (2) ◽  
pp. 123-129 ◽  
Author(s):  
Mariana Jesus ◽  
Tânia Silva ◽  
César Cagigal ◽  
Vera Martins ◽  
Carla Silva
Keyword(s):  
Depressive Symptoms ◽  
Dietary Patterns ◽  
Large Scale ◽  
Randomized Clinical Trials ◽  
Dietary Intervention ◽  
Common Mental Disorder ◽  
Controlled Trial ◽  
Statistical Significance ◽  
Inverse Association ◽  
The Impact

Introduction: The field of nutritional psychiatry is a fast-growing one. Although initially, it focused on the effects of vitamins and micronutrients in mental health, in the last decade, its focus also extended to the dietary patterns. The possibility of a dietary cost-effective intervention in the most common mental disorder, depression, cannot be overlooked due to its potential large-scale impact. Method: A classic review of the literature was conducted, and studies published between 2010 and 2018 focusing on the impact of dietary patterns in depression and depressive symptoms were included. Results: We found 10 studies that matched our criteria. Most studies showed an inverse association between healthy dietary patterns, rich in fruits, vegetables, lean meats, nuts and whole grains, and with low intake of processed and sugary foods, and depression and depressive symptoms throughout an array of age groups, although some authors reported statistical significance only in women. While most studies were of cross-sectional design, making it difficult to infer causality, a randomized controlled trial presented similar results. Discussion: he association between dietary patterns and depression is now well-established, although the exact etiological pathways are still unknown. Dietary intervention, with the implementation of healthier dietary patterns, closer to the traditional ones, can play an important role in the prevention and adjunctive therapy of depression and depressive symptoms. Conclusion: More large-scale randomized clinical trials need to be conducted, in order to confirm the association between high-quality dietary patterns and lower risk of depression and depressive symptoms.

Sign in / Sign up

Export Citation Format

Share Document