Effect of the Red Blood Cells on the Primary Thrombus Formation

2007 ◽  
Author(s):  
Koichiro Yano ◽  
Daisuke Mori ◽  
Ken-ichi Tsubota ◽  
Takuji Ishikawa ◽  
Shigeo Wada ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Blood Cell ◽  
Blood Cells ◽  
Thrombus Formation ◽  
The Other ◽  
Biochemical Processes ◽  
Mechanical Factors ◽  
Molecular Bridge

It has been pointed out that some mechanical factors play important roles in a series of physiological or biochemical processes during the thrombus formation. Recently, many studies including the authors’ work qualitatively demonstrated how the thrombus is regulated under the influences of the blood flow and the intercellular molecular bridge using computational fluid dynamics techniques[1–4]. They verified the importance of the balance of them in the process of the thrombus formation. However, few studies have taken into account the existence of the other cell constituents than the platelet such as red blood cell (RBC).

A review of computational fluid dynamics analysis of blood pumps

2009 ◽  
Vol 20 (4) ◽  
pp. 363-397 ◽  
Author(s):  
M. BEHBAHANI ◽  
M. BEHR ◽  
M. HORMES ◽  
U. STEINSEIFER ◽  
D. ARORA ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Blood Cells ◽  
Chronically Ill ◽  
Ventricular Assist Devices ◽  
Blood Damage ◽  
Damage Models ◽  
Computational Fluid Dynamics Analysis ◽  
Blood Pumps

Ventricular assist devices (VADs) provide long- and short-term support to chronically ill heart disease patients; these devices are expected to match the remarkable functionality of the natural heart, which makes their design a very challenging task. Blood pumps, the principal component of the VADs, must operate over a wide range of flow rates and pressure heads and minimise the damage to blood cells in the process. They should also be small to allow easy implantation in both children and adults. Mathematical methods and computational fluid dynamics (CFD) have recently emerged as powerful design tools in this context; a review of the recent advances in the field is presented here. This review focusses on the CFD-based design strategies applied to blood flow in blood pumps and other blood-handling devices. Both simulation methods for blood flow and blood damage models are reviewed. The literature is put into context with a discussion of the chronological development in the field. The review is illustrated with specific examples drawn from our group's Galerkin/least squares (GLS) finite-element simulations of the basic Newtonian flow problem for the continuous-flow centrifugal GYRO blood pump. The GLS formulation is outlined, and modifications to include models that better represent blood rheology are shown. Haemocompatibility analysis of the pump is reviewed in the context of haemolysis estimations based on different blood damage models. Our strain-based blood damage model that accounts for the viscoleasticity associated with the red blood cells is reviewed in detail. The viability of design improvement based on trial and error and complete simulation-based design optimisation schemes are also discussed.

Hemodynamic Assessment of Hollow-Fiber Membrane Oxygenators Using Computational Fluid Dynamics in Heterogeneous Membrane Models

2021 ◽  
Author(s):  
Daniele Dipresa ◽  
Panagiotis Kalozoumis ◽  
Michael Pflaum ◽  
Ariana Peredo ◽  
Bettina Wiegmann ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Shear Stress ◽  
Hollow Fiber ◽  
Hollow Fiber Membrane ◽  
Thrombus Formation ◽  
Shear Stresses ◽  
Fiber Membrane ◽  
Hemodynamic Assessment

Abstract Extracorporeal membrane oxygenation (ECMO) has been used clinically for more than 40 years as a bridge to transplantation, with hollow-fiber membrane (HFM) oxygenators gaining in popularity due to their high gas transfer and low flow resistance. In spite of the technological advances in ECMO devices, the inevitable contact of the perfused blood with the polymer hollow-fiber gas-exchange membrane, and the subsequent thrombus formation, limits their clinical usage to only 2-4 weeks. In addition, the inhomogeneous flow in the device can further enhance thrombus formation and limit gas-transport efficiency. Endothelialisation of the blood contacting surfaces of ECMO devices offers a potential solution to their inherent thrombogenicity. However, abnormal shear stresses and inhomogeneous blood flow might affect the function and activation status of the seeded endothelial cells (ECs). In this study, the blood flow through two HFM oxygenators, including the commercially-available iLA® MiniLung Petite Novalung (Xenios AG, Germany) and an experimental one for the rat animal model, was modelled using computational fluid dynamics (CFD), with a view to assessing the magnitude and distribution of the shear stress on the wall of the hollow fibers and flow fields in the oxygenators. This work demonstrated significant inhomogeneity in the flow dynamics of both oxygenators, with regions of high hollow-fiber wall shear stress and regions of stagnant flow, implying both regions of increased flow-induced blood damage and a variable flow-induced stimulation on seeded ECs in a biohybrid setting.

scholarly journals A Simple Transient Poiseuille-Based Approach to Mimic the Womersley Function and to Model Pulsatile Blood Flow

Dynamics ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 9-17
Author(s):  
Andrea Natale Impiombato ◽  
Giorgio La Civita ◽  
Francesco Orlandi ◽  
Flavia Schwarz Franceschini Zinani ◽  
Luiz Alberto Oliveira Rocha ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Boundary Conditions ◽  
Quadratic Function ◽  
Pulsatile Blood Flow ◽  
Flow Through ◽  
Simplified Analysis ◽  
Function Models ◽  
Flow Reversals

As it is known, the Womersley function models velocity as a function of radius and time. It has been widely used to simulate the pulsatile blood flow through circular ducts. In this context, the present study is focused on the introduction of a simple function as an approximation of the Womersley function in order to evaluate its accuracy. This approximation consists of a simple quadratic function, suitable to be implemented in most commercial and non-commercial computational fluid dynamics codes, without the aid of external mathematical libraries. The Womersley function and the new function have been implemented here as boundary conditions in OpenFOAM ESI software (v.1906). The discrepancy between the obtained results proved to be within 0.7%, which fully validates the calculation approach implemented here. This approach is valid when a simplified analysis of the system is pointed out, in which flow reversals are not contemplated.

scholarly journals On the effects of membrane viscosity on transient red blood cell dynamics

Soft Matter ◽  
2020 ◽  
Vol 16 (26) ◽  
pp. 6191-6205 ◽  
Author(s):  
Fabio Guglietta ◽  
Marek Behr ◽  
Luca Biferale ◽  
Giacomo Falcucci ◽  
Mauro Sbragaglia
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Cell ◽  
Red Blood Cell ◽  
Blood Circulation ◽  
Hydraulic Properties ◽  
Large Scale ◽  
Mechanical Response ◽  
Cell Dynamics ◽  
Membrane Viscosity

Computational Fluid Dynamics is currently used to design and improve the hydraulic properties of biomedical devices, wherein the large scale blood circulation needs to be simulated by accounting for the mechanical response of RBCs at the mesoscale.

scholarly journals Effects of dietary Mannan oligosaccharide (MOS) on grown, survival rate, intestinal morphology and blood cell count of the golden trevally fish (Gnathanodon specious)

2019 ◽  
Vol 19 (4A) ◽  
pp. 241-250
Author(s):  
Dang Tran Tu Tram ◽  
Nguyen Thi Nguyet Hue ◽  
Ho Son Lam ◽  
Nguyen Truong Tan Tai ◽  
Dao Thi Hong Ngoc
Keyword(s):  
Survival Rate ◽  
Blood Cell ◽  
Blood Cells ◽  
White Blood Cells ◽  
Intestinal Morphology ◽  
The Other ◽  
Control Group ◽  
Blood Cell Count ◽  
Mannan Oligosaccharide ◽  
Erythrocyte Density

The golden trevally fishes (Gnathanodon specious) (2.19 ± 0.23 g) were cultured in glass tanks with density of 20 fishes/tank and they were fed supplemental diets of different MOS concentrations (0; 0.2; 0.4 and 0.6%) for 90 days. Collected data included growth rate, survival rate and some hematological characteristics of this fish. The results demonstrated that MOS supplementation did not affect growth performance, erythrocyte density and blood cell size, however the survival rate was significantly increased. On the other hand, the total number of white blood cells (BC) on the 60th day in the fish fed with MOS supplements (5.78–6.96 × 104TB/mm3) was higher than that in the control group (only 5.43 × 104TB/mm3) with the largest total leukocytes (6.96 ± 0.50 × 104TB /mm3) at 0.2% MOS (p < 0.05).

Computational Fluid Dynamics (CFD) Study of the 4th Generation Prototype of a Continuous Flow Ventricular Assist Device (VAD)

2004 ◽  
Vol 126 (2) ◽  
pp. 180-187 ◽  
Author(s):  
Xinwei Song ◽  
Houston G. Wood ◽  
Don Olsen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Ventricular Assist Device ◽  
Continuous Flow ◽  
Surrounding Tissue ◽  
Assist Device ◽  
Ventricular Assist ◽  
Wide Range ◽  
Computational Fluid Dynamics Cfd

The continuous flow ventricular assist device (VAD) is a miniature centrifugal pump, fully suspended by magnetic bearings, which is being developed for implantation in humans. The CF4 model is the first actual prototype of the final design product. The overall performances of blood flow in CF4 have been simulated using computational fluid dynamics (CFD) software: CFX, which is commercially available from ANSYS Inc. The flow regions modeled in CF4 include the inlet elbow, the five-blade impeller, the clearance gap below the impeller, and the exit volute. According to different needs from patients, a wide range of flow rates and revolutions per minute (RPM) have been studied. The flow rate-pressure curves are given. The streamlines in the flow field are drawn to detect stagnation points and vortices that could lead to thrombosis. The stress is calculated in the fluid field to estimate potential hemolysis. The stress is elevated to the decreased size of the blood flow paths through the smaller pump, but is still within the safe range. The thermal study on the pump, the blood and the surrounding tissue shows the temperature rise due to magnetoelectric heat sources and thermal dissipation is insignificant. CFD simulation proved valuable to demonstrate and to improve the performance of fluid flow in the design of a small size pump.

Blood Flow Velocimetry in a Microchannel During Coagulation Using PIV and wOFV

2020 ◽  
Author(s):  
E. Kucukal ◽  
Y. Man ◽  
U. A. Gurkan ◽  
B. E. Schmidt
Keyword(s):  
Blood Flow ◽  
Blood Cells ◽  
Thrombus Formation ◽  
Blockage Ratio ◽  
Time Decay ◽  
Clotting Time ◽  
White Light Source ◽  
Flow Velocimetry ◽  
Flow Evolution ◽  
Time Decay Rate

Abstract This article describes novel measurements of the velocity of whole blood flow in a microchannel during coagulation. The blood is imaged volumetrically using a simple optical setup involving a white light source and a microscope camera. The images are processed using PIV and wavelet-based optical flow velocimetry (wOFV), both of which use images of individual blood cells as flow tracers. Measurements of several clinically relevant parameters such as the clotting time, decay rate, and blockage ratio are computed. The high-resolution wOFV results yield highly detailed information regarding thrombus formation and corresponding flow evolution that is the first of its kind.

Sign in / Sign up

Export Citation Format

Share Document