scholarly journals Pattern recognition with “materials that compute”

2016 ◽  
Vol 2 (9) ◽  
pp. e1601114 ◽  
Author(s):  
Yan Fang ◽  
Victor V. Yashin ◽  
Steven P. Levitan ◽  
Anna C. Balazs
Keyword(s):  
Pattern Recognition ◽  
Electrical Power ◽  
Electrical Energy ◽  
Convergence Time ◽  
Material System ◽  
Power Sources ◽  
Bz Reaction ◽  
Self Organized ◽  
In Series ◽  
The Individual

Driven by advances in materials and computer science, researchers are attempting to design systems where the computer and material are one and the same entity. Using theoretical and computational modeling, we design a hybrid material system that can autonomously transduce chemical, mechanical, and electrical energy to perform a computational task in a self-organized manner, without the need for external electrical power sources. Each unit in this system integrates a self-oscillating gel, which undergoes the Belousov-Zhabotinsky (BZ) reaction, with an overlaying piezoelectric (PZ) cantilever. The chemomechanical oscillations of the BZ gels deflect the PZ layer, which consequently generates a voltage across the material. When these BZ-PZ units are connected in series by electrical wires, the oscillations of these units become synchronized across the network, where the mode of synchronization depends on the polarity of the PZ. We show that the network of coupled, synchronizing BZ-PZ oscillators can perform pattern recognition. The “stored” patterns are set of polarities of the individual BZ-PZ units, and the “input” patterns are coded through the initial phase of the oscillations imposed on these units. The results of the modeling show that the input pattern closest to the stored pattern exhibits the fastest convergence time to stable synchronization behavior. In this way, networks of coupled BZ-PZ oscillators achieve pattern recognition. Further, we show that the convergence time to stable synchronization provides a robust measure of the degree of match between the input and stored patterns. Through these studies, we establish experimentally realizable design rules for creating “materials that compute.”

scholarly journals The Global Survey of the Electrical Energy Distribution System: A Review

2019 ◽  
Vol 9 (4) ◽  
pp. 2247 ◽  
Author(s):  
Archana Sudhakar Talhar ◽  
Sanjay B. Bodkhe
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Electrical Energy ◽  
Clean Energy ◽  
Central Intelligence Agency ◽  
Energy Sources ◽  
Power Sources ◽  
Energy Scenario ◽  
The World

This paper gives a review of energy scenario in India and other countries. Today’s demand of the world is to minimize greenhouse gas emissions, during the production of electricity. Henceforth over the world, the production of electrical power is changing by introducing abundantly available renewable energy sources like sun and wind. But, because of the intermittent nature of sustainable power sources, the electrical power network faces many problems, during the transmission and distribution of electricity. For resolving these issues, Electrical Energy Storage (EES) is acknowledged as supporting technology. This paper discusses about the world electrical energy scenario with top renowned developed countries in power generation and consumption. Contribution of traditional power sources changed after the introduction of renewable energy sources like sun and wind. Worldwide Agencies are formed like International Energy Agency (IEA), The Central Intelligence Agency, (CIS) etc. The main aim of these agencies is to provide reliable, affordable and clean energy. This paper will discuss about the regulatory authority and government policies/incentives taken by different countries.  At the end of this paper, author focuses on obstacles in implementation, development and benefits of renewable energy.

Investigation and Optimization of Power Based Smart Home Module Integrated with Automatic Solar Tracking System and MPPT Technique

2019 ◽  
Vol 889 ◽  
pp. 526-532
Author(s):  
Thai Viet Dang ◽  
Si Thong Dinh ◽  
Xuan Toi Bui
Keyword(s):  
Solar Cell ◽  
Solar Energy ◽  
Power Consumption ◽  
Power Systems ◽  
Tracking System ◽  
Electrical Power ◽  
Research Result ◽  
Electrical Energy ◽  
Cell System ◽  
Power Sources

Currently, the world has a lot of research and practical application of intelligent building systems integrated with intelligent power systems. Because Vietnam is a country with potential for solar energy, the integrator of solar energy is being strongly developed. However, the research result of the optimization of electrical energy used by the intelligent type solar integration is rare. This paper presents the design and structure of the module of intelligent control and monitoring via wireless network integrated with the automatic solar concentration system. The system allows easy connection and operation of all electrical power sources including the dispersal solar power to ensure the efficient and lower power consumption. In addition, the solar cell system is applied the Maximum Power Point Tracking technique (MPPT), which helps to stabilize and improve the power generation efficiency of the PV panels. The test results on the module showed absorption performance of automatic solar-cell flat plate systems is raised by 20-30% and power consumption in small households reduced approximately 30%.

scholarly journals Hollow Piezoelectric Ceramic Fibers for Energy Harvesting Fabrics

2013 ◽  
Vol 8 (1) ◽  
pp. 155892501300800
Author(s):  
François M. Guillot ◽  
Haskell W. Beckham ◽  
Johannes Leisen
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Lead Zirconate ◽  
Ceramic Fibers ◽  
Power Sources ◽  
Electromechanical Performance ◽  
Alternative Power

In the past few years, the growing need for alternative power sources has generated considerable interest in the field of energy harvesting. A particularly exciting possibility within that field is the development of fabrics capable of harnessing mechanical energy and delivering electrical power to sensors and wearable devices. This study presents an evaluation of the electromechanical performance of hollow lead zirconate titanate (PZT) fibers as the basis for the construction of such fabrics. The fibers feature individual polymer claddings surrounding electrodes directly deposited onto both inside and outside ceramic surfaces. This configuration optimizes the amount of electrical energy available by placing the electrodes in direct contact with the surface of the material and by maximizing the active piezoelectric volume. Hollow fibers were electroded, encapsulated in a polymer cladding, poled and characterized in terms of their electromechanical properties. They were then glued to a vibrating cantilever beam equipped with a strain gauge, and their energy harvesting performance was measured. It was found that the fibers generated twice as much energy density as commercial state-of-the-art flexible composite sensors. Finally, the influence of the polymer cladding on the strain transmission to the fiber was evaluated. These fibers have the potential to be woven into fabrics that could harvest mechanical energy from the environment and could eventually be integrated into clothing.

scholarly journals ENERGY HARVESTING TECHNIQUES IN WIRELESS SENSOR NETWORKS

2018 ◽  
Vol 17 (2) ◽  
pp. 117
Author(s):  
Tatjana Nikolić ◽  
Mile Stojčev ◽  
Goran Nikolić ◽  
Goran Jovanović
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Energy Harvesting ◽  
Electrical Power ◽  
Electrical Energy ◽  
Wireless Sensor ◽  
Design Solution ◽  
Basic Operation ◽  
Alternative Source ◽  
Power Sources

Batteries are the main source of energy for low-power electronics such as micro-electro mechanical systems (MEMS), wireless sensor networks, embedded devices for remote sensing and control, etc. With the limited capacity of finite power sources and the need for supplying energy for the lifetime of a system/device there is a requirement for self-powered devices. Using conventional batteries is not always good design solution because batteries require human intervention to replace them (very often in hard-accessible and harsh-environmental conditions). Therefore, acquiring the electrical power, by using an alternative source of energy that is needed to operate these devices is a major concern. The process of extracting energy from the surrounding environment and converting it into consumable electrical energy is known as energy harvesting or power scavenging. The energy harvesting sources can be used to increase the lifetime and capability of the devices by either replacing or augmenting the battery usage. There are various forms of energy that can be scavenged, like solar, mechanical, thermal, and electromagnetic. Nowadays, there is a big interest in the field of research related to energy harvesting. This paper represents a survey for identifying the sources of energy harvesting and describes the basic operation of principles of the most common energy harvester. As first, we present, in short, the conversion principles of single energy source harvesting systems and point to their benefits and limitations in their usage. After that, hybrid structures of energy harvesters which simultaneously combine scavenged power from different ambient sources (solar, thermoelectric, electromagnetic), with aim to support higher load at the output, are considered.

Waste Heat Recovery From Generators in the Deployed Army

2014 ◽  
Author(s):  
Gunnar Tamm ◽  
J. Ledlie Klosky ◽  
Jacob Baxter ◽  
Luke Grant ◽  
Isaac Melnick ◽  
...  
Keyword(s):  
Waste Heat ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
The United States ◽  
Hot Water ◽  
Efficient Production ◽  
Water Heater ◽  
Power Sources ◽  
Fuel Savings

Electrical power generation in austere settings, such as combat zones, places a heavy burden on the US Army; high costs in both dollars and lives lost require that every drop of fuel be used effectively and efficiently. In remote locations such as combat outposts (COPs) and small forward operating bases (FOBs) in Afghanistan, electrical power derived from the Army’s standard Advanced Medium Mobile Power Sources (AMMPS) generator is even used to heat water for showers and heat living spaces. This heating requires conversion of thermal energy to mechanical energy, which is then converted to electrical energy and back to heat. Thus, a significant fuel savings could be realized through the more efficient production of heat. A combined heat and power system is proposed; efficiency is increased by routing the generator exhaust through simple ducting to a standard gas hot water heater to produce hot water with waste heat. With funding from the U.S. Army Rapid Equipping Force, cadets and faculty at the United States Military Academy designed, built and tested a system for under $1,000 in parts which was readily coupled to a 5 kW AMMPS generator to produce hot shower water. Results indicate a possible fuel savings of 1500–2000 gallons per year, 20–35% increased fuel utility, and the ability to provide 10–20 five gallon showers during every 5 hours of operation of each 5 kW generator. At a fuel cost of $20–50 per gallon in the deployed environment, and considering the large inventory of deployed generators, the payback for the Army could be tremendous.

A Review of Two Patents Relating to Novel Energy Harvesting Techniques to Provide Electrical Power On-Board Gun-Fired Projectiles

2010 ◽  
Author(s):  
Jahangir Rastegar ◽  
Richard Murray
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Harsh Environment ◽  
Logical Framework ◽  
Power Sources ◽  
Piezoelectric Elements ◽  
Harvesting Techniques

This is a review of two patents relating to electrical power generation on-board gun-fired munitions. The devices harvest mechanical energy from the motion of the projectile (e.g. the axial firing acceleration), and then convert the energy from mechanical to electrical using novel mechanisms and materials such as piezoelectric elements. The devices are particularly important for several reasons. Firstly, the devices are inherently safe because the root source of the electrical energy is the motion of the projectile; therefore no electrical energy can be produced until after the projectile is fired. Second, the devices have a much longer shelf-life than competing electrical power sources such as batteries. Finally, the devices are simple, rugged, and reliable making them ideal for the harsh environment on-board gun-fired projectiles. In addition to presenting the general approach, the logical framework of the patented embodiments is presented, especially with respect to the types of motion used for harvesting and the challenges presented by the varied magnitudes of those motions in different weapon platforms.

scholarly journals Bioelectrochemical System: An Eco-Friendly Approach to Generate Electricity-Utilizing Plants and Microorganisms

2021 ◽  
Vol 18 (1) ◽  
pp. 147-161
Author(s):  
Kruti Dave ◽  
Parth Darji ◽  
Fenie Gandhi ◽  
Saumya Singh ◽  
Digvijaysinh Jadav
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Energy Demand ◽  
Electrical Energy ◽  
Climatic Conditions ◽  
Current Gain ◽  
In Series ◽  
Major Application ◽  
Inorganic Waste ◽  
The Individual

Owing to the fact of future energy demand, and the clampdown world is facing now, there is a crucial requirement for the sustainable energy sources which are cheap and environmentally friendly.As committed by a green alternative, for future enhancement of the planet, the fossil fuel abandonment is required, and instigation of renewable resources such as Microbial Fuel Cell [MFCs] and Plant Microbial Fuel Cell [PMFCs] should be implemented. MFC is a visionary technique, as it converts wastage into the energy, whereas, PMFC is a new-fangled technique devoid of any climatic conditions and it requires less investment. By scrutinizing this technique, Bacillus megaterium and sewage material are used in MFCs, whereas Azolla and Trigonellafoenumis used in PMFCs, which converts chemical energy into electrical energy with the help of electrons flowing from the anode to cathode via circuit. The individual setup of each MFCs and PMFCs are examined diurnally for voltage and current gain proceeded by connecting both [MFC and PMFC] in series with LED between, thus gaining the luminance in LED.The yield in voltage and current were measured for different fuel cells from Day 1 to Day 12 and Obtained notable difference in both voltage and current. Voltage Difference: MFC;0.041 to 1.733,BMFC;0.271 to 1.885, PMFC(Azolla); 0.00 to 0.35, PMFC(Fenugreek); 0.01 to 0.766 and Current difference: MFC; 0.001-1.133, BMFC; 0.001-1.133, PMFC(Azolla); 0.00 – 0.2, PMFC(Fenugreek); 0.00 – 0.512.The assurance in the aptness of this process, can be evaluated by its exertion in the society. As known its major application is production of electricity from the organic as well as inorganic waste in the environment, and by the plants. Majority of the industries have gone through this manner for the bioenergy and biosensors production and wastewater treatment.

scholarly journals Bioelectrochemical Sysytem: An Eco-Friendly Approach To Generate Electricity Utilizing Plants And Microorganisms

2020 ◽  
Author(s):  
KRUTI DAVE ◽  
Parth Darji ◽  
Fenie Gandhi ◽  
Saumya Singh ◽  
Digvijaysinh Jadav
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Energy Demand ◽  
Electrical Energy ◽  
Climatic Conditions ◽  
Current Gain ◽  
In Series ◽  
The Individual ◽  
Expanding Population ◽  
Current Energy

Abstract With the expanding population, there is increase in an energy demand, which leads to the depletion of non-sustainable energy sources, for example; fossils. As the current situation speaks, the oil deposits are left for mere 53 years, likely with gas i.e. 52 years and with coal 150 years. So, there is an urgent need to find a sustainable source which is cheap and environment friendly, owing to the fact of current energy consumption level is left for merely 230 years. As committed by green alternative, for the future enhancement of the planet, the fossil fuel abandonment is required, and instigation of renewable resources such as Microbial Fuel Cell [MFCs] and Plant Microbial Fuel Cell [PMFCs] should be implemented. MFC is a visionary technique, as it converts wastage into the energy, whereas, PMFC is a new-fangled technique devoid of any climatic conditions and also it requires less investment. By scrutinizing this technique, Bacillus megaterium and sewage material is used in MFCs whereas Azolla and Trigonella foenum is used in PMFCs, which converts chemical energy into electrical energy with the help of electrons flowing from anode to cathode via circuit. The individual setup of each MFCs and PMFCs are examined diurnally for voltage and current gain proceeded by connection of both [MFC and PMFC] in series with LED in between thus gaining the luminance in LED. So assurance is gained by this technique of MFC and PMFC as distinctive energy harvesting technology equipped with; consistency, maintenance and free power for distant future.

scholarly journals Renewable Energy from Cooking Stove Waste Heat Energy using Thermoelectric Generator for Night Market Application

2019 ◽  
Vol 8 (4) ◽  
pp. 1250-1255
Keyword(s):  
Seebeck Coefficient ◽  
Thermoelectric Generator ◽  
Waste Heat ◽  
Electrical Power ◽  
Electrical Energy ◽  
Small Magnitude ◽  
Excess Heat ◽  
Electric Generator ◽  
In Series ◽  
The Cost

Malaysia night market normally operated along a temporarily closed road. No electrical power provided by the authorities and therefore hawkers need to prepare their own. Currently, they are working with gasoline-electric generator. On top of the cost incurred, they also need to consume exhaust gas and noise from the machine. Further, this situation will also affect customers. With a high percentage of the hawkers involve with cooking activities using the LPG gas stove, excess heat is one of the potential energy which can be converted into electrical energy using a thermoelectric generator (TEG). The aim of this study is to convert the excess heat available used to powered night market electrical facilities. A set of experiments was conducted utilizing five units of TEG connected in series to convert excess heat from a butane gas stove to electrical power. The temperature at both the hot and cold sides of the TEG was recorded used to analyze the effect of power produced. Two electrical parameters namely voltage and current outputs were measured used to calculate the electrical power generated. The analysis focused on the two main governing parameters namely temperature different and Seebeck coefficient toward power generated. It was found that only some amount of excess heat was converted which produced up to 46.8 mW electrical power. This is based on the high temperature recorded at the cold side of the TEG. The almost constant trend showed in temperature different was contributed to a small magnitude of the Seebeck coefficient and so for the power generated. The trend showed by the power generated was also almost constant even the temperature on the hot side keep increasing. The energy conversion process was considered success and can be further increased by increasing the number of TEG units used as well as by incorporating a cooling mechanism as practiced by many researchers.

Sign in / Sign up

Export Citation Format

Share Document