scholarly journals Direct coherent multi-ink printing of fabric supercapacitors

2021 ◽  
Vol 7 (3) ◽  
pp. eabd6978 ◽  
Author(s):  
Jingxin Zhao ◽  
Hongyu Lu ◽  
Yan Zhang ◽  
Shixiong Yu ◽  
Oleksandr I. Malyi ◽  
...  
Keyword(s):  
System Integration ◽  
High Performance ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
High Mass ◽  
Wearable Electronics ◽  
Energy Storage Devices ◽  
Fabrication Procedure ◽  
Self Powered ◽  
Mechanical Devices

Coaxial fiber-shaped supercapacitors with short charge carrier diffusion paths are highly desirable as high-performance energy storage devices for wearable electronics. However, the traditional approaches based on the multistep fabrication processes for constructing the fiber-shaped energy device still encounter persistent restrictions in fabrication procedure, scalability, and mechanical durability. To overcome this critical challenge, an all-in-one coaxial fiber-shaped asymmetric supercapacitor (FASC) device is realized by a direct coherent multi-ink writing three-dimensional printing technology via designing the internal structure of the coaxial needles and regulating the rheological property and the feed rates of the multi-ink. Benefitting from the compact coaxial structure, the FASC device delivers a superior areal energy/power density at a high mass loading, and outstanding mechanical stability. As a conceptual exhibition for system integration, the FASC device is integrated with mechanical units and pressure sensor to realize high-performance self-powered mechanical devices and monitoring systems, respectively.

scholarly journals Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 13 ◽  
Author(s):  
Bin Zhang ◽  
Jaehyun Lee ◽  
Mincheol Kim ◽  
Naeeung Lee ◽  
Hyungdong Lee ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Storage ◽  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Layer By Layer ◽  
Energy Storage Devices ◽  
Laminar Structure ◽  
Jet Printing

The macroscopic assembly of two-dimensional materials into a laminar structure has received considerable attention because it improves both the mechanical and chemical properties of the original materials. However, conventional manufacturing methods have certain limitations in that they require a high temperature process, use toxic solvents, and are considerably time consuming. Here, we present a new system for the self-assembly of layer-by-layer (LBL) graphene oxide (GO) via an electrohydrodynamic (EHD) jet printing technique. During printing, the orientation of GO flakes can be controlled by the velocity distribution of liquid jet and electric field-induced alignment spontaneously. Closely-packed GO patterns with an ordered laminar structure can be rapidly realized using an interfacial assembly process on the substrates. The surface roughness and electrical conductivity of the LBL structure were significantly improved compared with conventional dispensing methods. We further applied this technique to fabricate a reduced graphene oxide (r-GO)-based supercapacitor and a three-dimensional (3D) metallic grid hybrid ammonia sensor. We present the EHD-assisted assembly of laminar r-GO structures as a new platform for preparing high-performance energy storage devices and sensors.

scholarly journals Atomic Modulation of 3D Conductive Frameworks Boost Performance of MnO2 for Coaxial Fiber-Shaped Supercapacitors

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Xiaona Wang ◽  
Zhenyu Zhou ◽  
Zhijian Sun ◽  
Jinho Hah ◽  
Yagang Yao ◽  
...  
Keyword(s):  
Energy Density ◽  
Specific Capacitance ◽  
High Performance ◽  
High Specific Capacitance ◽  
Superior Performance ◽  
High Mass ◽  
Mass Loading ◽  
Energy Storage Devices ◽  
Free Standing ◽  
Cell Potential

Abstract Coaxial fiber-shaped supercapacitors are a promising class of energy storage devices requiring high performance for flexible and miniature electronic devices. Yet, they are still struggling from inferior energy density, which comes from the limited choices in materials and structure used. Here, Zn-doped CuO nanowires were designed as 3D framework for aligned distributing high mass loading of MnO2 nanosheets. Zn could be introduced into the CuO crystal lattice to tune the covalency character and thus improve charge transport. The Zn–CuO@MnO2 as positive electrode obtained superior performance without sacrificing its areal and gravimetric capacitances with the increasing of mass loading of MnO2 due to 3D Zn–CuO framework enabling efficient electron transport. A novel category of free-standing asymmetric coaxial fiber-shaped supercapacitor based on Zn0.11CuO@MnO2 core electrode possesses superior specific capacitance and enhanced cell potential window. This asymmetric coaxial structure provides superior performance including higher capacity and better stability under deformation because of sufficient contact between the electrodes and electrolyte. Based on these advantages, the as-prepared asymmetric coaxial fiber-shaped supercapacitor exhibits a high specific capacitance of 296.6 mF cm−2 and energy density of 133.47 μWh cm−2. In addition, its capacitance retention reaches 76.57% after bending 10,000 times, which demonstrates as-prepared device’s excellent flexibility and long-term cycling stability.

Embedding hollow Co3O4 nanoboxes into a three-dimensional macroporous graphene framework for high-performance energy storage devices

Nano Research ◽  
2018 ◽  
Vol 11 (5) ◽  
pp. 2836-2846 ◽  
Author(s):  
Mengping Li ◽  
Maher F. El-Kady ◽  
Jee Y. Hwang ◽  
Matthew D. Kowal ◽  
Kristofer Marsh ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Three Dimensional ◽  
Energy Storage Devices ◽  
Storage Devices

scholarly journals 3D Porous Ti3C2 MXene/NiCo-MOF Composites for Enhanced Lithium Storage

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 695 ◽  
Author(s):  
Yijun Liu ◽  
Ying He ◽  
Elif Vargun ◽  
Tomas Plachy ◽  
Petr Saha ◽  
...  
Keyword(s):  
High Performance ◽  
Electrode Materials ◽  
High Current Density ◽  
Composite Films ◽  
Three Dimensional ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Energy Storage Devices ◽  
Lithium Storage ◽  
Hierarchical Porous

To improve Li storage capacity and the structural stability of Ti3C2 MXene-based electrode materials for lithium-ion batteries (LIBs), a facile strategy is developed to construct three-dimensional (3D) hierarchical porous Ti3C2/bimetal-organic framework (NiCo-MOF) nanoarchitectures as anodes for high-performance LIBs. 2D Ti3C2 nanosheets are coupled with NiCo-MOF nanoflakes induced by hydrogen bonds to form 3D Ti3C2/NiCo-MOF composite films through vacuum-assisted filtration technology. The morphology and electrochemical properties of Ti3C2/NiCo-MOF are influenced by the mass ratio of MOF to Ti3C2. Owing to the interconnected porous structures with a high specific surface area, rapid charge transfer process, and Li+ diffusion rate, the Ti3C2/NiCo-MOF-0.4 electrode delivers a high reversible capacity of 402 mAh g−1 at 0.1 A g−1 after 300 cycles; excellent rate performance (256 mAh g−1 at 1 A g−1); and long-term stability with a capacity retention of 85.7% even after 400 cycles at a high current density, much higher than pristine Ti3C2 MXene. The results highlight that Ti3C2/NiCo-MOF have great potential in the development of high-performance energy storage devices.

A facile method for the preparation of three-dimensional CNT sponge and a nanoscale engineering design for high performance fiber-shaped asymmetric supercapacitors

2017 ◽  
Vol 5 (43) ◽  
pp. 22559-22567 ◽  
Author(s):  
Yong Li ◽  
Zhuo Kang ◽  
Xiaoqin Yan ◽  
Shiyao Cao ◽  
Minghua Li ◽  
...  
Keyword(s):  
Engineering Design ◽  
High Performance ◽  
Three Dimensional ◽  
Wearable Electronics ◽  
Asymmetric Supercapacitors ◽  
Smart Textiles ◽  
High Performance Fiber ◽  
Application Potential

Fiber supercapacitors (FSCs) have great application potential in future smart textiles and portable and wearable electronics because of their flexibility, tiny volume and wearability.

scholarly journals Conformation-modulated three-dimensional electrocatalysts for high-performance fuel cell electrodes

2021 ◽  
Vol 7 (30) ◽  
pp. eabe9083
Author(s):  
Jong Min Kim ◽  
Ahrae Jo ◽  
Kyung Ah Lee ◽  
Hyeuk Jin Han ◽  
Ye Ji Kim ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Fuel Cells ◽  
Surface Area ◽  
Active Sites ◽  
High Performance ◽  
Polymer Electrolyte Membrane ◽  
Three Dimensional ◽  
Building Blocks ◽  
High Mass ◽  
Transfer Resistance

Unsupported Pt electrocatalysts demonstrate excellent electrochemical stability when used in polymer electrolyte membrane fuel cells; however, their extreme thinness and low porosity result in insufficient surface area and high mass transfer resistance. Here, we introduce three-dimensionally (3D) customized, multiscale Pt nanoarchitectures (PtNAs) composed of dense and narrow (for sufficient active sites) and sparse (for improved mass transfer) nanoscale building blocks. The 3D-multiscale PtNA fabricated by ultrahigh-resolution nanotransfer printing exhibited excellent performance (45% enhanced maximum power density) and high durability (only 5% loss of surface area for 5000 cycles) compared to commercial Pt/C. We also theoretically elucidate the relationship between the 3D structures and cell performance using computational fluid dynamics. We expect that the structure-controlled 3D electrocatalysts will introduce a new pathway to design and fabricate high-performance electrocatalysts for fuel cells, as well as various electrochemical devices that require the precision engineering of reaction surfaces and mass transfer.

A flexible, lightweight and stretchable all-solid-state supercapacitor based on warp-knitted stainless-steel mesh for wearable electronics

2022 ◽  
pp. 004051752110698
Author(s):  
Chuanli Su ◽  
Guangwei Shao ◽  
Qinghua Yu ◽  
Yaoli Huang ◽  
Jinhua Jiang ◽  
...  
Keyword(s):  
Stainless Steel ◽  
High Performance ◽  
Light Emitting Diode ◽  
Low Cost ◽  
Three Dimensional ◽  
Rate Capability ◽  
Cycling Stability ◽  
Wearable Electronics ◽  
Light Emitting ◽  
Dimensional Network

Highly conductive, flexible, stretchable and lightweight electrode substrates are essential to meet the future demand on supercapacitors for wearable electronics. However, it is difficult to achieve the above characteristics simultaneously. In this study, ultrafine stainless-steel fibers (with a diameter of ≈30 μm) are knitted into stainless-steel meshes (SSMs) with a diamond structure for the fabrication of textile stretchable electrodes and current collectors. The electrodes are fabricated by utilizing an electrodeposited three-dimensional network graphene framework and poly(3,4-ethylenedioxythiophene) (PEDOT) coating on the SSM substrates via a two-step electrodeposition process, which show a specific capacitance of 77.09 F g−1 (0.14 A g−1) and superb cycling stability (91% capacitance retention after 5000 cycles). Furthermore, the assembled flexible stretchable supercapacitor based on the PEDOT/reduced graphene oxide (RGO)@SSM electrodes exhibits an areal capacitance (53 mF cm−2 at 0.1 mA cm−2), a good cycling stability (≈73% capacitance retention after 5000 cycles), rate capability (36 mF cm−2 at 5 mA cm−2), stretchable stability (≈78% capacitance retention at 10% strain for 500 stretching cycles) and outstanding flexibility and stability under various bending deformations. The assembled supercapacitors can illuminate a thermometer and a light-emitting diode, demonstrating their potential application as stretchable supercapacitors. This simple and low-cost method developed for fabricating lightweight, stretchable and stable high-performance supercapacitors offers new opportunities for future stretchable electronic devices.

scholarly journals Author Correction: High-performance compliant thermoelectric generators with magnetically self-assembled soft heat conductors for self-powered wearable electronics

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Byeongmoon Lee ◽  
Hyeon Cho ◽  
Kyung Tae Park ◽  
Jin-Sang Kim ◽  
Min Park ◽  
...  
Keyword(s):  
High Performance ◽  
Thermoelectric Generators ◽  
Wearable Electronics ◽  
Self Assembled ◽  
Self Powered

A Correction to this paper has been published: https://doi.org/10.1038/s41467-021-21629-y

scholarly journals Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2736
Author(s):  
Rui Liu ◽  
Rui Jiang ◽  
Yu-Han Chu ◽  
Wein-Duo Yang
Keyword(s):  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Mechanical Stability ◽  
Electrochemical Impedance ◽  
High Energy ◽  
High Energy Density ◽  
Ni Foam ◽  
Energy Storage Devices ◽  
Compact Structure ◽  
X Ray

A novel MnO2/graphene/Ni foam electrode was fabricated via the impregnation and electrochemical deposition technique with Ni foams serving as substrates and graphene serving as a buffer layer for the enhanced conductivity of MnO2. The samples were characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Compared with other methods, our strategy avoids using surfactants and high-temperature treatments. The electrodes exhibited excellent electrochemical performance, high capabilities, and a long cycle life. Various electrochemical properties were systematically studied using cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that the specific capacitance of the MnO2/graphene/Ni composite prepared at 1 mA cm−2 of electrodeposition could achieve a scan rate of 10 mV s−1 at 292.8 F g−1, which confirmed that the graphene layer could remarkably improve electron transfer at the electrolyte–electrode interface. The capacitance retention was about 90% after 5000 cycles. Additionally, a MnO2/graphene//graphene asymmetric supercapacitor was assembled and it exhibited a high-energy density of 91 Wh kg−1 as well as had an excellent power density of 400 W kg−1 at 1 A g−1. It is speculated that the strong adhesion between the graphene and MnO2 can provide a compact structure to enhance the mechanical stability, which can be applied as a new method for energy storage devices.

scholarly journals Flexible, Transparent and Highly Conductive Polymer Film Electrodes for All-Solid-State Transparent Supercapacitor Applications

Membranes ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 788
Author(s):  
Xin Guan ◽  
Lujun Pan ◽  
Zeng Fan
Keyword(s):  
Energy Storage ◽  
Solid State ◽  
Electrochemical Properties ◽  
Polymer Film ◽  
High Performance ◽  
Electrode Materials ◽  
Wearable Electronics ◽  
Energy Storage Devices ◽  
Active Electrode ◽  
Supercapacitor Applications

Lightweight energy storage devices with high mechanical flexibility, superior electrochemical properties and good optical transparency are highly desired for next-generation smart wearable electronics. The development of high-performance flexible and transparent electrodes for supercapacitor applications is thus attracting great attention. In this work, we successfully developed flexible, transparent and highly conductive film electrodes based on a conducting polymer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The PEDOT:PSS film electrodes were prepared via a simple spin-coating approach followed by a post-treatment with a salt solution. After treatment, the film electrodes achieved a high areal specific capacitance (3.92 mF/cm2 at 1 mA/cm2) and long cycling lifetime (capacitance retention >90% after 3000 cycles) with high transmittance (>60% at 550 nm). Owing to their good optoelectronic and electrochemical properties, the as-assembled all-solid-state device for which the PEDOT:PSS film electrodes were utilized as both the active electrode materials and current collectors also exhibited superior energy storage performance over other PEDOT-based flexible and transparent symmetric supercapacitors in the literature. This work provides an effective approach for producing high-performance, flexible and transparent polymer electrodes for supercapacitor applications. The as-obtained polymer film electrodes can also be highly promising for future flexible transparent portable electronics.

Sign in / Sign up

Export Citation Format

Share Document