scholarly journals Genetic Features of Resident Biofilms Determine Attachment of Listeria monocytogenes

2009 ◽  
Vol 75 (24) ◽  
pp. 7814-7821 ◽  
Author(s):  
Olivier Habimana ◽  
Mickael Meyrand ◽  
Thierry Meylheuc ◽  
Saulius Kulakauskas ◽  
Romain Briandet
Keyword(s):  
Listeria Monocytogenes ◽  
Laser Scanning ◽  
Time Course ◽  
Surface Hydrophobicity ◽  
Flow Cell ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microscopy Imaging ◽  
Initial Fixation ◽  
Genetic Features

ABSTRACT Planktonic Listeria monocytogenes cells in food-processing environments tend most frequently to adhere to solid surfaces. Under these conditions, they are likely to encounter resident biofilms rather than a raw solid surface. Although metabolic interactions between L. monocytogenes and resident microflora have been widely studied, little is known about the biofilm properties that influence the initial fixation of L. monocytogenes to the biofilm interface. To study these properties, we created a set of model resident Lactococcus lactis biofilms with various architectures, types of matrices, and individual cell surface properties. This was achieved using cell wall mutants that affect bacterial chain formation, exopolysaccharide (EPS) synthesis and surface hydrophobicity. The dynamics of the formation of these biofilm structures were analyzed in flow cell chambers using in situ time course confocal laser scanning microscopy imaging. All the L. lactis biofilms tested reduced the initial immobilization of L. monocytogenes compared to the glass substratum of the flow cell. Significant differences were seen in L. monocytogenes settlement as a function of the genetic background of resident lactococcal biofilm cells. In particular, biofilms of the L. lactis chain-forming mutant resulted in a marked increase in L. monocytogenes settlement, while biofilms of the EPS-secreting mutant efficiently prevented pathogen fixation. These results offer new insights into the role of resident biofilms in governing the settlement of pathogens on food chain surfaces and could be of relevance in the field of food safety controls.

scholarly journals Use of electromagnetic stimulation on an Enterococcus faecalis biofilm on root canal treated teeth in vitro

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Beatriz H. D. Panariello ◽  
Justin K. Kindler ◽  
Kenneth J. Spolnik ◽  
Ygal Ehrlich ◽  
George J. Eckert ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Root Canal ◽  
Laser Scanning ◽  
Confocal Imaging ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microscopy Imaging ◽  
Electromagnetic Stimulation ◽  
Root Canal Disinfection

AbstractRoot canal disinfection is of utmost importance in the success of the treatment, thus, a novel method for achieving root canal disinfection by electromagnetic waves, creating a synergistic reaction via electric and thermal energy, was created. To study electromagnetic stimulation (EMS) for the disinfection of root canal in vitro, single rooted teeth were instrumented with a 45.05 Wave One Gold reciprocating file. Specimens were sterilized and inoculated with Enterococcus faecalis ATCC 29,212, which grew for 15 days to form an established biofilm. Samples were treated with 6% sodium hypochlorite (NaOCl), 1.5% NaOCl 1.5% NaOCl with EMS, 0.9% saline with EMS or 0.9% saline. After treatments, the colony forming units (CFU) was determined. Data was analyzed by Wilcoxon Rank Sums Test (α = 0.05). One sample per group was scored and split for confocal laser scanning microscopy imaging. There was a significant effect with the use of NaOCl with or without EMS versus 0.9% saline with or without EMS (p = 0.012 and 0.003, respectively). CFUs were lower when using 0.9% saline with EMS versus 0.9% saline alone (p = 0.002). Confocal imaging confirmed CFU findings. EMS with saline has an antibiofilm effect against E. faecalis and can potentially be applied for endodontic disinfection.

The fate of medial edge epithelial cells during palatal fusion in vitro: an analysis by DiI labelling and confocal microscopy

Development ◽  
1992 ◽  
Vol 114 (2) ◽  
pp. 379-388 ◽  
Author(s):  
M.J. Carette ◽  
M.W. Ferguson
Keyword(s):  
Laser Scanning ◽  
Time Course ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Palatal Fusion ◽  
Morphological Criteria ◽  
Medial Edge ◽  
Mesenchymal Transformation

Fusion of bilateral shelves, to form the definitive mammalian secondary palate, is critically dependent on removal of the medial edge cells that constitute the midline epithelial seam. Conflicting views suggest that programmed apoptotic death or epithelial-mesenchymal transformation of these cells is predominantly involved. Due in part to the potentially ambiguous interpretation of static images and the notable absence of fate mapping studies, the process by which this is achieved has, however, remained mechanistically equivocal. Using an in vitro mouse model, we have selectively labelled palatal epithelia with DiI and examined the fate of medial edge epithelial (MEE) cells during palatal fusion by localisation using a combination of conventional histology and confocal laser scanning microscopy (CLSM). In dynamic studies using CLSM, we have made repetitive observations of the same palatal cultures in time-course investigations. Our results concurred with the established morphological criteria of seam degeneration; however, they provided no evidence of MEE cell death or transformation. Instead we report that MEE cells migrate nasally and orally out of the seam and are recruited into, and constitute, epithelial triangles on both the oral and nasal aspects of the palate. Subsequently these cells become incorporated into the oral and nasal epithelia on the surface of the palate. We hypothesize an alternative method of seam degeneration in vivo which largely conserves the MEE population by recruiting it into the nasal and oral epithelia.

Tyrosine phosphorylation following alterations in arteriolar intraluminal pressure and wall tension

2001 ◽  
Vol 281 (3) ◽  
pp. H1047-H1056 ◽  
Author(s):  
Timothy V. Murphy ◽  
Brian E. Spurrell ◽  
Michael A. Hill
Keyword(s):  
Tyrosine Phosphorylation ◽  
Fluorescence Intensity ◽  
Laser Scanning ◽  
Time Course ◽  
Transmural Pressure ◽  
Laser Scanning Microscopy ◽  
Intraluminal Pressure ◽  
Confocal Laser ◽  
Wall Tension ◽  
Myogenic Activity

Arterioles respond to increased transmural pressure with myogenic constriction. The present study investigated the role of tyrosine phosphorylation in myogenic activity. Cannulated segments of a rat cremaster arteriole were fixed under pressure, followed by incubation with fluorescein isothiocyanate (FITC)-conjugated anti-phosphotyrosine. Smooth muscle cell fluorescence intensity was measured with the use of confocal laser-scanning microscopy. Anti-phosphotyrosine fluorescence intensity in muscle cells of arterioles maintained at 100 mmHg was reduced by the tyrosine kinase inhibitor tyrphostin A47 (30 μM) and increased by the tyrosine phosphatase inhibitor pervanadate (100 μM). In time-course experiments, anti-phosphotyrosine fluorescence increased slowly (over 5 min) after an acute increase in intraluminal pressure, and was dissociated from myogenic contraction (within 1 min). In contrast, angiotensin II (0.1 μM) caused rapid constriction and increased tyrosine phosphorylation. Anti-phosphotyrosine fluorescence was also pressure dependent (10–100 mmHg). Abolition of myogenic activity, either through removal of extracellular Ca2+, or exposure to verapamil (5 μM) or forskolin (0.1 μM) caused a further increase in anti-phosphotyrosine fluorescence. We conclude that transmural pressure and/or wall tension in arterioles causes increased tyrosine phosphorylation; however, this is not involved in the acute phase of myogenic constriction but may be involved in later responses, such as sustained myogenic tone or mechanisms possibly related to growth.

scholarly journals Mosaic-CLSM Assessment of Bacterial Spatial Distribution in Cosmetic Matrices According to Matrix Viscosity and Bacterial Hydrophobicity

Cosmetics ◽  
2020 ◽  
Vol 7 (2) ◽  
pp. 32
Author(s):  
Samia Almoughrabie ◽  
Chrisse Ngari ◽  
Romain Briandet ◽  
Valérie Poulet ◽  
Florence Dubois-Brissonnet
Keyword(s):  
Spatial Distribution ◽  
Laser Scanning ◽  
Rapid Assessment ◽  
Challenge Test ◽  
Surface Hydrophobicity ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Bacterial Surface ◽  
Bacterial Hydrophobicity ◽  
The Impact

The reliability of the challenge test depends, among other parameters, on the spatial distribution of microorganisms in the matrix. The present study aims to quickly identify factors that are susceptible to impair a uniform distribution of inoculated bacteria in cosmetic matrices in this context. We used mosaic confocal laser scanning microscopy (M-CLSM) to obtain rapid assessment of the impact of the composition and viscosity of cosmetic matrices on S. aureus spatial distribution. Several models of cosmetic matrices were formulated with different concentrations of two thickeners and were inoculated with three S. aureus strains having different levels of hydrophobicity. The spatial distribution of S. aureus in each matrix was evaluated according to the frequency distribution of the fluorescence values of at least 1350 CLSM images. We showed that, whatever the thickener used, an increasingly concentration of thickener results in increasingly bacterial clustered distribution. Moreover, higher bacterial hydrophobicity also resulted in a more clustered spatial distribution. In conclusion, CLSM-based method allows a rapid characterization of bacterial spatial distribution in complex emulsified systems. Both matrix viscosity and bacterial surface hydrophobicity affect the bacterial spatial distribution which can have an impact on the reliability of bacterial enumeration during challenge test.

Effects of Bacteriophage P100 at Different Concentrations on the Structural Parameters of Listeria monocytogenes Biofilms

2018 ◽  
Vol 81 (12) ◽  
pp. 2040-2044 ◽  
Author(s):  
CRISTINA RODRÍGUEZ-MELCÓN ◽  
ROSA CAPITA ◽  
CAMINO GARCÍA-FERNÁNDEZ ◽  
CARLOS ALONSO-CALLEJA
Keyword(s):  
Image Analysis ◽  
Listeria Monocytogenes ◽  
Laser Scanning ◽  
Digital Image Analysis ◽  
Surface Coverage ◽  
Structural Parameters ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Foodborne Diseases ◽  
Average Thickness

ABSTRACT Because listeriosis is one of the deadliest foodborne diseases, controlling and eradicating Listeria monocytogenes biofilms is a serious challenge for food safety. Biofilms (24 h old) formed on polystyrene by a L. monocytogenes strain of food origin were exposed for a further 24 h to 12 different concentrations (from 100 to 1011 PFU/mL) of the bacteriophage P100 (Listex P100). The structural parameters of biofilms were studied by using confocal laser scanning microscopy and digital image analysis. The biovolume in the observation field (14,121 μm2) of control (untreated) biofilms was 237,333.1 ± 2,692.6 μm3. The biomass of treated biofilms ranged from 164.7 ± 89.0 μm3 (biofilms exposed to 1010 PFU/mL) to 231,170.5 ± 15,142.0 μm3 (100 PFU/mL). The lowest biomass was achieved after treatment with 108 PFU/mL, with no further decrease in biovolume when higher phage concentrations were used. A strong (P < 0.001) correlation was found between phage concentration (log units) and biovolume (−0.965), surface coverage (−0.939), roughness (0.976), maximum thickness (−0.853), and average thickness (−0.965). Findings from this research suggest that bacteriophage P100 at concentrations equal to or greater than 8 log PFU/mL successfully removes L. monocytogenes biofilms from polystyrene surfaces.

Finding the comfort zone: Online-monitoring of electroactive bacteria colonising electrode surfaces with different chemical properties

2020 ◽  
Author(s):  
Hanna Frühauf ◽  
Markus Stöckl ◽  
Dirk Holtmann
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Confocal Laser Scanning Microscopy ◽  
Electrode Surface ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Electrochemical Impedance ◽  
Flow Cell ◽  
Laser Scanning Microscopy ◽  
Confocal Laser

<p>Mechanisms of electron transfer vary greatly within the diverse group of electroactive microorganisms and so does the need to attach to the electrode surface, e.g. by forming a biofilm.</p> <p>Electrochemical impedance spectroscopy (EIS) and confocal laser scanning microscopy (CLSM) are well established methods to monitor cell attachment to an electrode surface and have therefore been combined in a flow cell as a screening system. The flow cell, equipped with a transparent indium tin oxide working electrode (ITO WE), allows monitoring of attachment processes in real time with minimal needs for additional biofilm preparation. In preliminary experiments the flow cell was successfully used as microbial fuel cell (MFC) with a potential of +0.4 V vs. Ag/AgCl using <em>Shewanella oneidensis</em> as electroactive model organism. [1]</p> <p>Commonly, graphite-based electrode materials are used in bioelectrochemical systems due to their low costs and high conductivity. However, the hydrophobic and negatively charged surface is not yet optimal for microbial attachment. There are numerous attempts on electrode surface engineering in order to overcome this problem. In the majority of studies the biofilm analysis and evaluation of the attachment takes place at the end of the experiment, neglecting the impacts of the chemical surface properties and initial electrode conditioning during the very beginning of biofilm formation.</p> <p>To investigate initial attachment and biofilm formation in real-time, the transparent ITO-electrode is coated with polyelectrolytes differing in hydrophobicity and polarity to evaluate their effects on the initial surface colonisation by different electroactive microorganisms. Combining CLSM and EIS, both, surface coverage and electrochemical interaction of electrode-associated bacteria can be assessed.</p> <p>With this we aim to understand and ease initial steps of biofilm formation to improve efficiency of bioelectrochemical applications, e.g. with regards to start-up time.</p> <p> </p> <p>[1] Stöckl, M., Schlegel, C., Sydow, A., Holtmann, D., Ulber, R., & Mangold, K. M. (2016). Membrane separated flow cell for parallelized electrochemical impedance spectroscopy and confocal laser scanning microscopy to characterize electro-active microorganisms. <em>Electrochimica Acta</em>, 220, 444-452.</p>

scholarly journals Effect of arsenite on swimming motility delays surface colonization in Herminiimonas arsenicoxydans

Microbiology ◽  
2010 ◽  
Vol 156 (8) ◽  
pp. 2336-2342 ◽  
Author(s):  
M. Marchal ◽  
R. Briandet ◽  
S. Koechler ◽  
B. Kammerer ◽  
P. N. Bertin
Keyword(s):  
Laser Scanning ◽  
Time Course ◽  
Wild Type Strain ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Wild Type ◽  
Arsenite Oxidase ◽  
Swimming Motility ◽  
In The Wild ◽  
Biofilm Development

Herminiimonas arsenicoxydans is a Gram-negative bacterium able to detoxify arsenic-contaminated environments by oxidizing arsenite [As(III)] to arsenate [As(V)] and by scavenging arsenic ions in an extracellular matrix. Its motility and colonization behaviour have been previously suggested to be influenced by arsenite. Using time-course confocal laser scanning microscopy, we investigated its biofilm development in the absence and presence of arsenite. Arsenite was shown to delay biofilm initiation in the wild-type strain; this was partly explained by its toxicity, which caused an increased growth lag time. However, this delayed adhesion step in the presence of arsenite was not observed in either a swimming motility defective fliL mutant or an arsenite oxidase defective aoxB mutant; both strains displayed the wild-type surface properties and growth capacities. We propose that during the biofilm formation process arsenite acts on swimming motility as a result of the arsenite oxidase activity, preventing the switch between planktonic and sessile lifestyles. Our study therefore highlights the existence, under arsenite exposure, of a competition between swimming motility, resulting from arsenite oxidation, and biofilm initiation.

scholarly journals A Protein Kinase A-Dependent Mechanism by Which Rotavirus Affects the Distribution and mRNA Level of the Functional Tight Junction-Associated Protein, Occludin, in Human Differentiated Intestinal Caco-2 Cells

2007 ◽  
Vol 81 (16) ◽  
pp. 8579-8586 ◽  
Author(s):  
Isabelle Beau ◽  
Jacqueline Cotte-Laffitte ◽  
Raymonde Amsellem ◽  
Alain L. Servin
Keyword(s):  
Protein Kinase ◽  
Protein Kinase A ◽  
Laser Scanning ◽  
Time Course ◽  
Mrna Level ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Infected Cells ◽  
Triton X ◽  
Kinase A

ABSTRACT We found that at the tight junctions (TJs) of Caco-2 cell monolayers, rhesus monkey rotavirus (RRV) infection induced the disappearance of occludin. Confocal laser scanning microscopy showed the disappearance of occludin from the cell-cell boundaries without modifying the expression of the other TJ-associated proteins, ZO-1 and ZO-3. Western immunoblot analysis of RRV-infected cells showed a significant fall in the levels of the nonphosphorylated form of occludin in both Triton X-100-insoluble and Triton X-100-soluble fractions, without any change in the levels of the phosphorylated form of occludin. Quantitative reverse transcription-PCRs revealed that the level of transcription of the gene that encodes occludin was significantly reduced in RRV-infected cells. Treatment of RRV-infected cells with Rp-cyclic AMP and protein kinase A inhibitors H89 and KT5720 during the time course of the infection restored the distribution of occludin and a normal level of transcription of the gene that encodes occludin.

Sign in / Sign up

Export Citation Format

Share Document