scholarly journals Rapid Antimicrobial Susceptibility Testing Using Forward Laser Light Scatter Technology

2016 ◽  
Vol 54 (11) ◽  
pp. 2701-2706 ◽  
Author(s):  
Randall T. Hayden ◽  
Lani K. Clinton ◽  
Carolyn Hewitt ◽  
Terri Koyamatsu ◽  
Yilun Sun ◽  
...  

The delayed reporting of antimicrobial susceptibility testing remains a limiting factor in clinical decision-making in the treatment of bacterial infection. This study evaluates the use of forward laser light scatter (FLLS) to measure bacterial growth for the early determination of antimicrobial susceptibility. Three isolates each (two clinical isolates and one reference strain) ofStaphylococcus aureus,Escherichia coli, andPseudomonas aeruginosawere tested in triplicate using two commercial antimicrobial testing systems, the Vitek2 and the MicroScan MIC panel, to challenge the BacterioScan FLLS. The BacterioScan FLLS showed a high degree of categorical concordance with the commercial methods. Pairwise comparison with each commercial system serving as a reference standard showed 88.9% agreement with MicroScan (two minor errors) and 72.2% agreement with Vitek (five minor errors). FLLS using the BacterioScan system shows promise as a novel method for the rapid and accurate determination of antimicrobial susceptibility.

mSystems ◽  
2018 ◽  
Vol 3 (6) ◽  
Author(s):  
A. S. Gargis ◽  
H. P. McLaughlin ◽  
A. B. Conley ◽  
C. Lascols ◽  
P. A. Michel ◽  
...  

ABSTRACTPenicillin (PEN) is a low-cost option for anthrax treatment, but naturally occurring resistance has been reported. β-Lactamase expression (bla1,bla2) inBacillus anthracisis regulated by a sigma factor (SigP) and its cognate anti-sigma factor (RsiP). Mutations leading to truncation of RsiP were previously described as a basis for PEN resistance. Here, we analyze whole-genome sequencing (WGS) data and compare the chromosomalsigP-bla1regions from 374B. anthracisstrains to determine the frequency of mutations, identify mutations associated with PEN resistance, and evaluate the usefulness of WGS for predicting PEN resistance. Few (3.5%) strains contained at least 1 of 11 different mutations insigP,rsiP, orbla1.Nine of these mutations have not been previously associated with PEN resistance. Four strains showed PEN resistance (PEN-R) by conventional broth microdilution, including 1 strain with a novel frameshift inrsiP. One strain that carries the samersiPframeshift mutation as that found previously in a PEN-R strain showed a PEN-susceptible (PEN-S) phenotype and exhibited decreasedbla1andbla2transcription. An unexpectedly small colony size, a reduced growth rate, and undetectable β-lactamase activity levels (culture supernatant and cell lysate) were observed in this PEN-S strain. Sequence analysis revealed mutations in genes associated with growth defects that may contribute to this phenotype. WhileB. anthracisrsiPmutations cannot be exclusively used to predict resistance, four of the five strains withrsiPmutations were PEN-R. Therefore, theB. anthracissigP-bla1region is a useful locus for WGS-based PEN resistance prediction, but phenotypic testing remains essential.IMPORTANCEDetermination of antimicrobial susceptibility ofB. anthracisis essential for the appropriate distribution of antimicrobial agents for postexposure prophylaxis (PEP) and treatment of anthrax. Analysis of WGS data allows for the rapid detection of mutations in antimicrobial resistance (AMR) genes in an isolate, but the presence of a mutation in an AMR gene does not always accurately predict resistance. As mutations in the anti-sigma factor RsiP have been previously associated with high-level penicillin resistance in a limited number of strains, we investigated WGS assemblies from 374 strains to determine the frequency of mutations and performed functional antimicrobial susceptibility testing. Of the five strains that contained mutations inrsiP, only four were PEN-R by functional antimicrobial susceptibility testing. We conclude that while sequence analysis of this region is useful for AMR prediction inB. anthracis, genetic analysis should not be used exclusively and phenotypic susceptibility testing remains essential.


2019 ◽  
Vol 57 (12) ◽  
Author(s):  
C. Paul Morris ◽  
Patricia J. Simner

ABSTRACT Accurate detection of methicillin resistance among staphylococci is vital for patient care. Methicillin resistance is most commonly mediated by acquisition of the mecA gene, which encodes an altered penicillin binding protein, PBP2a. Application of phenotypic methods to detect mecA-mediated beta-lactam resistance in staphylococci is becoming more complex as species-specific differences are identified among coagulase-negative staphylococci (CoNS). Previously, interpretative criteria and antimicrobial susceptibility testing (AST) methods specific to the CoNS group were used to evaluate Staphylococcus epidermidis. A manuscript by S. N. Naccache, K. Callan, C.-A. D. Burnham, M. A. Wallace, et al. (J Clin Microbiol 57:e00961-19, 2019, https://doi.org/10.1128/JCM.00961-19) details experiments revealing that S. epidermidis, the most common clinically isolated CoNS, requires tailored use of previously described methods and interpretive criteria to reliably identify the presence of mecA-mediated methicillin resistance.


2017 ◽  
Vol 55 (7) ◽  
pp. 2116-2126 ◽  
Author(s):  
Matthias Marschal ◽  
Johanna Bachmaier ◽  
Ingo Autenrieth ◽  
Philipp Oberhettinger ◽  
Matthias Willmann ◽  
...  

ABSTRACT Bloodstream infections (BSI) are an important cause of morbidity and mortality. Increasing rates of antimicrobial-resistant pathogens limit treatment options, prompting an empirical use of broad-range antibiotics. Fast and reliable diagnostic tools are needed to provide adequate therapy in a timely manner and to enable a de-escalation of treatment. The Accelerate Pheno system (Accelerate Diagnostics, USA) is a fully automated test system that performs both identification and antimicrobial susceptibility testing (AST) directly from positive blood cultures within approximately 7 h. In total, 115 episodes of BSI with Gram-negative bacteria were included in our study and compared to conventional culture-based methods. The Accelerate Pheno system correctly identified 88.7% (102 of 115) of all BSI episodes and 97.1% (102 of 105) of isolates that are covered by the system's identification panel. The Accelerate Pheno system generated an AST result for 91.3% (95 of 104) samples in which the Accelerate Pheno system identified a Gram-negative pathogen. The overall category agreement between the Accelerate Pheno system and culture-based AST was 96.4%, the rates for minor discrepancies 1.4%, major discrepancies 2.3%, and very major discrepancies 1.0%. Of note, ceftriaxone, piperacillin-tazobactam, and carbapenem resistance was correctly detected in blood culture specimens with extended-spectrum beta-lactamase-producing Escherichia coli ( n = 7) and multidrug-resistant Pseudomonas aeruginosa ( n = 3) strains. The utilization of the Accelerate Pheno system reduced the time to result for identification by 27.49 h ( P < 0.0001) and for AST by 40.39 h ( P < 0.0001) compared to culture-based methods in our laboratory setting. In conclusion, the Accelerate Pheno system provided fast, reliable results while significantly improving turnaround time in blood culture diagnostics of Gram-negative BSI.


2016 ◽  
Vol 54 (3) ◽  
pp. 516-517 ◽  
Author(s):  
Brandi M. Limbago

Bacteria in theStaphylococcus intermediusgroup, includingStaphylococcuspseudintermedius, often encodemecA-mediated methicillin resistance. Reliable detection of this phenotype for proper treatment and infection control decisions requires that these coagulase-positive staphylococci are accurately identified and specifically that they are not misidentified asS. aureus. As correct species level bacterial identification becomes more commonplace in clinical laboratories, one can expect to see changes in guidance for antimicrobial susceptibility testing and interpretation. The study by Wu et al. in this issue (M. T. Wu, C.-A. D. Burnham, L. F. Westblade, J. Dien Bard, S. D. Lawhon, M. A. Wallace, T. Stanley, E. Burd, J. Hindler, R. M. Humphries, J Clin Microbiol 54:535–542, 2016,http://dx.doi.org/10.1128/JCM.02864-15) highlights the impact of robust identification ofS. intermediusgroup organisms on the selection of appropriate antimicrobial susceptibility testing methods and interpretation.


2021 ◽  
Vol 59 (4) ◽  
Author(s):  
Claudio U. Köser ◽  
Sophia B. Georghiou ◽  
Thomas Schön ◽  
Max Salfinger

ABSTRACT In a recent report of a systematic review of critical concentrations (CCs), the World Health Organization (WHO) lowered the rifampin (RIF) CC for antimicrobial susceptibility testing (AST) of the Mycobacterium tuberculosis complex using Middlebrook 7H10 medium and the Bactec Mycobacterial Growth Indicator Tube (MGIT) 960 system from 1 to 0.5 μg/ml. The previous RIF CC for 7H10 had been in use for over half a century. Because it had served as the de facto reference standard, it contributed to the endorsement of inappropriately high CCs for other AST methods, including the U.S. Food and Drug Administration (FDA)-approved MGIT system. Moreover, this resulted in confusion about the interpretation of seven borderline resistance mutations in rpoB (i.e., L430P, D435Y, H445L, H445N, H445S, L452P, and I491F). In this issue of the Journal of Clinical Microbiology, Shea et al. (J Clin Microbiol 59:e01885-20, 2021, https://doi.org/10.1128/JCM.01885-20) provide evidence that the CC endorsed by the Clinical and Laboratory Standards Institute for the Sensititre MYCOTB system, which is not FDA approved but is CE-IVD marked in the European Union, is likely also too high. These findings underscore the importance of calibrating AST methods against a rigorously defined reference standard, as recently proposed by the European Committee on Antimicrobial Susceptibility Testing, as well as the value of routine next-generation sequencing for investigating discordant AST results.


2019 ◽  
Vol 57 (11) ◽  
Author(s):  
Romney M. Humphries ◽  
Daniel A. Green ◽  
Audrey N. Schuetz ◽  
Yehudit Bergman ◽  
Shawna Lewis ◽  
...  

ABSTRACT Susceptibility testing of the polymyxins (colistin and polymyxin B) is challenging for clinical laboratories. The Clinical and Laboratory Standards Institute (CLSI) Antimicrobial Susceptibility Testing Subcommittee evaluated two methods to enable accurate testing of these agents. These methods were a colistin broth disk elution (CBDE) and a colistin agar test (CAT), the latter of which was evaluated using two inoculum volumes, 1 μl (CAT-1) and 10 μl (CAT-10). The methods were evaluated using a collection of 270 isolates of Enterobacterales, 122 Pseudomonas aeruginosa isolates, and 106 Acinetobacter spp. isolates. Overall, 94.4% of CBDE results were in essential agreement and 97.9% in categorical agreement (CA) with reference broth microdilution MICs. Nine very major errors (VME; 3.2%) and 3 major errors (ME; 0.9%) were observed. With the CBDE, 98.6% CA was observed for Enterobacterales (2.5% VME, 0% ME), 99.3% CA was observed for P. aeruginosa (0% VME, 0.7% ME), and 93.1% CA was observed for Acinetobacter spp. (5.6% VME, 3.3% ME). Overall, CA was 94.9% with 6.8% VME using CAT-1 and improved to 98.3% with 3.9% VME using CAT-10. No ME were observed using either CAT-1 or CAT-10. Using the CAT-1/CAT-10, the CA observed was 99.4%/99.7% for Enterobacterales (1%/0.5% VME), 98.7%/100% for P. aeruginosa (8.3%/0% VME), and 88.5%/92.3% for Acinetobacter spp. (21.4%/14.3% VME). Based on these data, the CLSI antimicrobial susceptibility testing (AST) subcommittee endorsed the CBDE and CAT-10 methods for colistin testing of Enterobacterales and P. aeruginosa.


2020 ◽  
Vol 86 (9) ◽  
Author(s):  
Luyao Ma ◽  
Marlen Petersen ◽  
Xiaonan Lu

ABSTRACT Campylobacter spp. have been recognized as major foodborne pathogens worldwide. An increasing frequency of antibiotic-resistant pathogens, including Campylobacter spp., have been identified to transmit from food products to humans and cause severe threats to public health. To better mitigate the antibiotic resistance crisis, rapid detection methods are required to provide timely antimicrobial resistance surveillance data for agri-food systems. Herein, we developed a polymer-based microfluidic device for the identification and antimicrobial susceptibility testing (AST) of Campylobacter spp. An array of bacterial incubation chambers were created in the microfluidic device, where chromogenic medium and antibiotics were loaded. The growth of Campylobacter spp. was visualized by color change due to chromogenic reactions. This platform achieved 100% specificity for Campylobacter identification. Sensitive detection of multiple Campylobacter species (C. jejuni, C. coli, and C. lari) was obtained in artificially contaminated milk and poultry meat, with detection limits down to 1 × 102 CFU/ml and 1 × 104 CFU/25 g, respectively. On-chip AST determined Campylobacter antibiotic susceptibilities by the lowest concentration of antibiotics that can inhibit bacterial growth (i.e., no color change observed). High coincidences (91% to 100%) of on-chip AST and the conventional agar dilution method were achieved against several clinically important antibiotics. For a presumptive colony, on-chip identification and AST were completed in parallel within 24 h, whereas standard methods, including biochemical assays and traditional culture-based AST, take several days for multiple sequential steps. In conclusion, this lab-on-a-chip device can achieve rapid and reliable detection of antibiotic-resistant Campylobacter spp. IMPORTANCE Increasing concerns of antibiotic-resistant Campylobacter spp. with regard to public health emphasize the importance of efficient and fast detection. This study described the timely identification and antimicrobial susceptibility testing of Campylobacter spp. by using a microfluidic device. Our developed method not only reduced the total analysis time, but it also simplified food sample preparation and chip operation for end users. Due to the miniaturized size of the lab-on-a-chip platform, the detection was achieved by using up to 1,000 times less of the reagents than with standard reference methods, making it a competitive approach for rapid screening and surveillance study in food industries. In addition, multiple clinically important Campylobacter species (C. jejuni, C. coli, and C. lari) could be tested by our device. This device has potential for wide application in food safety management and clinical diagnostics, especially in resource-limited regions.


Sign in / Sign up

Export Citation Format

Share Document