Astronomically forced hydrology of the Late Cretaceous sub-tropical Potosí Basin, Bolivia

2020 ◽  
Vol 132 (9-10) ◽  
pp. 1931-1952
Author(s):  
Adrian Tasistro-Hart ◽  
Adam Maloof ◽  
Blair Schoene ◽  
Michael P. Eddy
Keyword(s):  
Time Series ◽  
Late Cretaceous ◽  
Three Dimensional ◽  
Field Measurements ◽  
Ionization Mass ◽  
Orbital Parameters ◽  
Stratigraphic Model ◽  
Sea Level Oscillations ◽  
Earth’S Climate ◽  
Stratigraphic Height

Abstract Periodic variations in Earth’s orbital parameters force climate on local and global scales, with global responses particularly sensitive to the presence of ice sheets and their associated feedbacks. Therefore, determining whether orbital forcings influenced sedimentary records of the past, and if so, which had such an effect, can shed light on Earth’s climate sensitivity and global ice volume. To this end, we present a field- and drone-based cyclostratigraphy of the predominantly lacustrine El Molino Formation of the Late Cretaceous–Early Paleogene Potosí Basin in present day Bolivia, which contains carbonate mud parasequences that record fluctuating hydrological conditions, including ephemeral marine connections, from 73 Ma to 64 Ma. We introduce a novel methodology for incorporating drone imagery into a quantitative, three-dimensional stratigraphic model that generates an upward-younging quantity comparable to stratigraphic height, and we find that our model outperforms our own field measurements of stratigraphic height. We project drone imagery at two sites into the stratigraphic model to construct time series of outcrop color, which vary systematically with facies and track basin water depth. Spectral analysis of these time series reveals sedimentary periodicities corresponding to short eccentricity, precession, and semi-precession, which are corroborated with measurements of magnetic susceptibility from mudstones. We generate independent age models at both study areas from four new U-Pb chemical abrasion–isotope dilution–thermal ionization mass spectrometry (CA–ID–TIMS) ages, which are consistent with an orbital interpretation for observed sedimentary periodicities. Importantly, we observe the presence of obliquity-scale periodicity in sedimentation during a period of marine connection, suggesting that sea level oscillations were driven by obliquity. This observation is consistent with previous claims about the presence of a small, orbitally forced Antarctic ice sheet during the latest Cretaceous.

scholarly journals Blowing and drifting snow in Alpine terrain: numerical simulation and related field measurements

1998 ◽  
Vol 26 ◽  
pp. 174-178 ◽  
Author(s):  
Peter Gauer
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Three Dimensional ◽  
Field Measurements ◽  
Blowing Snow ◽  
Related Field ◽  
Drifting Snow ◽  
Physically Based ◽  
Snow Transport

A physically based numerical model of drifting and blowing snow in three-dimensional terrain is developed. The model includes snow transport by saltation and suspension. As an example, a numerical simulation for an Alpine ridge is presented and compared with field measurements.

scholarly journals Development of a time-series shotgun metagenomics database for monitoring microbial communities at the Pacific coast of Japan

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kazutoshi Yoshitake ◽  
Gaku Kimura ◽  
Tomoko Sakami ◽  
Tsuyoshi Watanabe ◽  
Yukiko Taniuchi ◽  
...  
Keyword(s):  
Time Series ◽  
Microbial Communities ◽  
Pacific Coast ◽  
Three Dimensional ◽  
Amplicon Sequencing ◽  
Metagenomic Data ◽  
Shotgun Metagenomics ◽  
Functional Features ◽  
Pacific Coast Of Japan ◽  
Marine Microbial Communities

AbstractAlthough numerous metagenome, amplicon sequencing-based studies have been conducted to date to characterize marine microbial communities, relatively few have employed full metagenome shotgun sequencing to obtain a broader picture of the functional features of these marine microbial communities. Moreover, most of these studies only performed sporadic sampling, which is insufficient to understand an ecosystem comprehensively. In this study, we regularly conducted seawater sampling along the northeastern Pacific coast of Japan between March 2012 and May 2016. We collected 213 seawater samples and prepared size-based fractions to generate 454 subsets of samples for shotgun metagenome sequencing and analysis. We also determined the sequences of 16S rRNA (n = 111) and 18S rRNA (n = 47) gene amplicons from smaller sample subsets. We thereafter developed the Ocean Monitoring Database for time-series metagenomic data (http://marine-meta.healthscience.sci.waseda.ac.jp/omd/), which provides a three-dimensional bird’s-eye view of the data. This database includes results of digital DNA chip analysis, a novel method for estimating ocean characteristics such as water temperature from metagenomic data. Furthermore, we developed a novel classification method that includes more information about viruses than that acquired using BLAST. We further report the discovery of a large number of previously overlooked (TAG)n repeat sequences in the genomes of marine microbes. We predict that the availability of this time-series database will lead to major discoveries in marine microbiome research.

scholarly journals Transient Three-Dimensional Flow Field Measurements by Means of 3D µPTV in Drying Poly(Vinyl Acetate)-Methanol Thin Films Subject to Short-Scale Marangoni Instabilities

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1223
Author(s):  
Max Tönsmann ◽  
Philip Scharfer ◽  
Wilhelm Schabel
Keyword(s):  
Flow Field ◽  
Vinyl Acetate ◽  
Three Dimensional ◽  
Field Measurements ◽  
Initial Assessment ◽  
Ambient Conditions ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Short Scale ◽  
Dry Film

Convective Marangoni instabilities in drying polymer films may induce surface deformations, which persist in the dry film, deteriorating product performance. While theoretic stability analyses are abundantly available, experimental data are scarce. We report transient three-dimensional flow field measurements in thin poly(vinyl acetate)-methanol films, drying under ambient conditions with several films exhibiting short-scale Marangoni convection cells. An initial assessment of the upper limit of thermal and solutal Marangoni numbers reveals that the solutal effect is likely to be the dominant cause for the observed instabilities.

Study of Rehabilitation of Injured Knee Joint Applying Chaotic Theory in Human Body Motion

2007 ◽  
Vol 342-343 ◽  
pp. 581-584
Author(s):  
Byung Young Moon ◽  
Kwon Son ◽  
Jung Hong Park
Keyword(s):  
Time Series ◽  
Lyapunov Exponent ◽  
Angular Displacement ◽  
Three Dimensional ◽  
Gait Pattern ◽  
Body Motion ◽  
Largest Lyapunov Exponent ◽  
Chaos Analysis ◽  
Nonlinear Technique ◽  
Injured Knee

Gait analysis is essential to identify accurate cause and knee condition from patients who display abnormal walking. Traditional linear tools can, however, mask the true structure of motor variability, since biomechanical data from a few strides during the gait have limitation to understanding the system. Therefore, it is necessary to propose a more precise dynamic method. The chaos analysis, a nonlinear technique, focuses on understanding how variations in the gait pattern change over time. Healthy eight subjects walked on a treadmill for 100 seconds at 60 Hz. Three dimensional walking kinematic data were obtained using two cameras and KWON3D motion analyzer. The largest Lyapunov exponent from the measured knee angular displacement time series was calculated to quantify local stability. This study quantified the variability present in time series generated from gait parameter via chaos analysis. Gait pattern is found to be chaotic. The proposed Lyapunov exponent can be used in rehabilitation and diagnosis of recoverable patients.

scholarly journals Three-dimensional deformation time series of glacier motion from multiple-aperture DInSAR observation

2019 ◽  
Vol 93 (12) ◽  
pp. 2651-2660 ◽  
Author(s):  
Sergey Samsonov
Keyword(s):  
Time Series ◽  
Surface Deformation ◽  
Ground Deformation ◽  
Three Dimensional ◽  
Data Sets ◽  
Ice Flow ◽  
The North ◽  
Glacier Ice ◽  
Deformation Component ◽  
3D Deformation

AbstractThe previously presented Multidimensional Small Baseline Subset (MSBAS-2D) technique computes two-dimensional (2D), east and vertical, ground deformation time series from two or more ascending and descending Differential Interferometric Synthetic Aperture Radar (DInSAR) data sets by assuming that the contribution of the north deformation component is negligible. DInSAR data sets can be acquired with different temporal and spatial resolutions, viewing geometries and wavelengths. The MSBAS-2D technique has previously been used for mapping deformation due to mining, urban development, carbon sequestration, permafrost aggradation and pingo growth, and volcanic activities. In the case of glacier ice flow, the north deformation component is often too large to be negligible. Historically, the surface-parallel flow (SPF) constraint was used to compute the static three-dimensional (3D) velocity field at various glaciers. A novel MSBAS-3D technique has been developed for computing 3D deformation time series where the SPF constraint is utilized. This technique is used for mapping 3D deformation at the Barnes Ice Cap, Baffin Island, Nunavut, Canada, during January–March 2015, and the MSBAS-2D and MSBAS-3D solutions are compared. The MSBAS-3D technique can be used for studying glacier ice flow at other glaciers and other surface deformation processes with large north deformation component, such as landslides. The software implementation of MSBAS-3D technique can be downloaded from http://insar.ca/.

Assessment of a Double Hole Film Cooling Geometry Using S-PIV and PSP

2013 ◽  
Author(s):  
Lesley M. Wright ◽  
Stephen T. McClain ◽  
Charles P. Brown ◽  
Weston V. Harmon
Keyword(s):  
Film Cooling ◽  
Density Ratio ◽  
Three Dimensional ◽  
Field Measurements ◽  
Secondary Flows ◽  
Cylindrical Hole ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Hole Geometry ◽  
Compound Angle

A novel, double hole film cooling configuration is investigated as an alternative to traditional cylindrical and fanshaped, laidback holes. This experimental investigation utilizes a Stereo-Particle Image Velocimetry (S-PIV) to quantitatively assess the ability of the proposed, double hole geometry to weaken or mitigate the counter-rotating vortices formed within the jet structure. The three-dimensional flow field measurements are combined with surface film cooling effectiveness measurements obtained using Pressure Sensitive Paint (PSP). The double hole geometry consists of two compound angle holes. The inclination of each hole is θ = 35°, and the compound angle of the holes is β = ± 45° (with the holes angled toward one another). The simple angle cylindrical and shaped holes both have an inclination angle of θ = 35°. The blowing ratio is varied from M = 0.5 to 1.5 for all three film cooling geometries while the density ratio is maintained at DR = 1.0. Time averaged velocity distributions are obtained for both the mainstream and coolant flows at five streamwise planes across the fluid domain (x/d = −4, 0, 1, 5, and 10). These transverse velocity distributions are combined with the detailed film cooling effectiveness distributions on the surface to evaluate the proposed double hole configuration (compared to the traditional hole designs). The fanshaped, laidback geometry effectively reduces the strength of the kidney-shaped vortices within the structure of the jet (over the entire range of blowing ratios considered). The three-dimensional velocity field measurements indicate the secondary flows formed from the double hole geometry strengthen in the plane perpendicular to the mainstream flow. At the exit of the double hole geometry, the streamwise momentum of the jets is reduced (compared to the single, cylindrical hole), and the geometry offers improved film cooling coverage. However, moving downstream in the steamwise direction, the two jets form a single jet, and the counter-rotating vortices are comparable to those formed within the jet from a single, cylindrical hole. These strong secondary flows lift the coolant off the surface, and the film cooling coverage offered by the double hole geometry is reduced.

Diesel Droplet Diffusion in Isotropic Turbulence With Digital Holographic Cinematography

2005 ◽  
Author(s):  
Balaji Gopalan ◽  
Edwin Malkiel ◽  
Jian Sheng ◽  
Joseph Katz
Keyword(s):  
Time Series ◽  
High Speed ◽  
Isotropic Turbulence ◽  
Fluid Motion ◽  
Three Dimensional ◽  
Time History ◽  
Sample Volume ◽  
Velocity Autocorrelation Function ◽  
Digital Cameras ◽  
Velocity Autocorrelation

High-speed in-line digital holographic cinematography was used to investigate the diffusion of droplets in locally isotropic turbulence. Droplets of diesel fuel (0.3–0.9mm diameter, specific gravity of 0.85) were injected into a 37×37×37mm3 sample volume located in the center of a 160-liter tank. The turbulence was generated by 4 spinning grids, located symmetrically in the corners of the tank, and was characterized prior to the experiments. The sample volume was back illuminated with two perpendicular collimated beams of coherent laser light and time series of in-line holograms were recorded with two high-speed digital cameras at 500 frames/sec. Numerical reconstruction generated a time series of high-resolution images of the droplets throughout the sample volume. We developed an algorithm for automatically detecting the droplet trajectories from each view, for matching the two views to obtain the three-dimensional tracks, and for calculating the time history of velocity. We also measured the mean fluid motion using 2-D PIV. The data enabled us to calculate the Lagrangian velocity autocorrelation function.

Estimating contribution of high-frequency sea-level oscillations to the extreme sea levels in the Adriatic Sea

2021 ◽  
Author(s):  
Krešimir Ruić ◽  
Jadranka Šepić ◽  
Maja Karlović ◽  
Iva Međugorac
Keyword(s):  
Time Series ◽  
Sea Level ◽  
High Frequency ◽  
Adriatic Sea ◽  
Tide Gauge ◽  
Data Series ◽  
Sea Levels ◽  
Short Period ◽  
Extreme Sea Levels ◽  
Sea Level Oscillations

<p>Extreme sea levels are known to hit the Adriatic Sea and to occasionally cause floods that produce severe material damage. Whereas the contribution of longer-period (T > 2 h) sea-level oscillations to the phenomena has been well researched, the contribution of the shorter period (T < 2 h) oscillations is yet to be determined. With this aim, data of 1-min sampling resolution were collected for 20 tide gauges, 10 located at the Italian (north and west) and 10 at the Croatian (east) Adriatic coast. Analyses were done on time series of 3 to 15 years length, with the latest data coming from 2020, and with longer data series available for the Croatian coast. Sea level data were thoroughly checked, and spurious data were removed. </p><p>For each station, extreme sea levels were defined as events during which sea level surpasses its 99.9 percentile value. The contribution of short-period oscillations to extremes was then estimated from corresponding high-frequency (T < 2 h) series. Additionally, for four Croatian tide gauge stations (Rovinj, Bakar, Split, and Dubrovnik), for period of 1956-2004, extreme sea levels were also determined from the hourly sea level time series, with the contribution of short-period oscillations visually estimated from the original tide gauge charts.  </p><p>Spatial and temporal distribution of contribution of short-period sea-level oscillations to the extreme sea level in the Adriatic were estimated. It was shown that short-period sea-level oscillation can significantly contribute to the overall extremes and should be considered when estimating flooding levels. </p>

Sign in / Sign up

Export Citation Format

Share Document