Robust software sensor design for the state estimation in a sulfate-reducing bioreactor

2016 ◽  
Vol 50 (1) ◽  
pp. 67-75 ◽  
Author(s):  
R. V. Gómez-Acata ◽  
M. I. Neria-González ◽  
R. Aguilar-López
Keyword(s):  
State Estimation ◽  
The State ◽  
Sensor Design ◽  
Software Sensor ◽  
Sulfate Reducing ◽  
Sulfate Reducing Bioreactor

Exponential Observer Design for State Estimation in a Class of Anaerobic Sulfate Reducing Bioreactor

2009 ◽  
Vol 4 (2) ◽  
Author(s):  
Ricardo Aguilar-López ◽  
Ricardo Acevedo-Gómez
Keyword(s):  
Mathematical Model ◽  
State Estimation ◽  
Exponential Convergence ◽  
Observer Design ◽  
Kinetic Term ◽  
Stirred Bioreactor ◽  
Sulfate Reducing ◽  
Nominal Model ◽  
Corrective Term ◽  
Sulfate Reducing Bioreactor

The objective of this work is to infer the biomass and product concentrations in a class of bioreactor, under the assumption of substrate measurements. This is done by employing a mathematical model of a continuous stirred bioreactor where the corresponding kinetic term is experimentally corroborated. The observer's structure contains, as usual, a predictive term given for nominal model plus a corrective term, which is proposed as adaptive one, where the corresponding observer's gain obey a specific dynamic equation, which provides an exponential convergence characteristic, under the Lipschitz assumption of the system. Numerical simulations show an adequate performance of the proposed observer and a comparison with a finite-time observer is done.

Analyzing the State Estimation Software Package Reliability Using the Fault Tree Technology

2018 ◽  
Vol 6 (6) ◽  
pp. 24-34
Author(s):  
Irina N. KOLOSOK ◽  
◽  
Elena S. KORKINA ◽  
Alexandr V. TIKHONOV ◽  
◽  
...  
Keyword(s):  
State Estimation ◽  
Software Package ◽  
Fault Tree ◽  
The State ◽  
Package Reliability

State Estimation Using Randomly Delayed Measurements

1993 ◽  
Vol 115 (1) ◽  
pp. 19-26 ◽  
Author(s):  
A. Ray ◽  
L. W. Liou ◽  
J. H. Shen
Keyword(s):  
State Estimation ◽  
Minimum Variance ◽  
The State ◽  
Sensor Data ◽  
State Estimator ◽  
Uniform Asymptotic Stability ◽  
Simulation Experiments ◽  
State Estimate ◽  
Sampling Instant ◽  
Recursive Relations

This paper presents a modification of the conventional minimum variance state estimator to accommodate the effects of randomly varying delays in arrival of sensor data at the controller terminal. In this approach, the currently available sensor data is used at each sampling instant to obtain the state estimate which, in turn, can be used to generate the control signal. Recursive relations for the filter dynamics have been derived, and the conditions for uniform asymptotic stability of the filter have been conjectured. Results of simulation experiments using a flight dynamic model of advanced aircraft are presented for performance evaluation of the state estimation filter.

scholarly journals A Two-Step State Estimation Algorithm for Hybrid AC-DC Distribution Grids

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1967
Author(s):  
Gaurav Kumar Roy ◽  
Marco Pau ◽  
Ferdinanda Ponci ◽  
Antonello Monti
Keyword(s):  
State Estimation ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Estimation Algorithm ◽  
The State ◽  
Second Step ◽  
Distribution Grid ◽  
Dc Distribution ◽  
Attractive Option ◽  
Distribution Grids

Direct Current (DC) grids are considered an attractive option for integrating high shares of renewable energy sources in the electrical distribution grid. Hence, in the future, Alternating Current (AC) and DC systems could be interconnected to form hybrid AC-DC distribution grids. This paper presents a two-step state estimation formulation for the monitoring of hybrid AC-DC grids. In the first step, state estimation is executed independently for the AC and DC areas of the distribution system. The second step refines the estimation results by exchanging boundary quantities at the AC-DC converters. To this purpose, the modulation index and phase angle control of the AC-DC converters are integrated into the second step of the proposed state estimation formulation. This allows providing additional inputs to the state estimation algorithm, which eventually leads to improve the accuracy of the state estimation results. Simulations on a sample AC-DC distribution grid are performed to highlight the benefits resulting from the integration of these converter control parameters for the estimation of both the AC and DC grid quantities.

scholarly journals State Estimation for Cooperative Lateral Vehicle Following Using Vehicle-to-Vehicle Communication

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 651
Author(s):  
Wouter Schinkel ◽  
Tom van der Sande ◽  
Henk Nijmeijer
Keyword(s):  
State Estimation ◽  
Cooperative Control ◽  
The State ◽  
State Estimator ◽  
Estimation Process ◽  
Vehicle Communication ◽  
Vehicle To Vehicle ◽  
Control Schemes ◽  
Input Signals ◽  
Vehicle To Vehicle Communication

A cooperative state estimation framework for automated vehicle applications is presented and demonstrated via simulations, the estimation framework is used to estimate the state of a lead and following vehicle simultaneously. Recent developments in the field of cooperative driving require novel techniques to ensure accurate and stable vehicle following behavior. Control schemes for the cooperative control of longitudinal and lateral vehicle dynamics generally require vehicle state information about the lead vehicle, which in some cases cannot be accurately measured. Including vehicle-to-vehicle communication in the state estimation process can provide the required input signals for the practical implementation of cooperative control schemes. This study is focused on demonstrating the benefits of using vehicle-to-vehicle communication in the state estimation of a lead and following vehicle via simulations. The state estimator, which uses a cascaded Kalman filtering process, takes the operating frequencies of different sensors into account in the estimation process. Simulation results of three different driving scenarios demonstrate the benefits of using vehicle-to-vehicle communication as well as the attenuation of measurement noise. Furthermore, in contrast to relying on low frequency measurement data for the input signals of cooperative control schemes, the state estimator provides a state estimate at every sample.

scholarly journals Methodology for Implementing the State Estimation in Renewable Energy Management Systems

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2301
Author(s):  
Yun-Sung Cho ◽  
Yun-Hyuk Choi
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
State Estimation ◽  
Measurement Errors ◽  
Large Scale ◽  
Test System ◽  
The State ◽  
Inner Function ◽  
Outer Function ◽  
Bad Data

This paper describes a methodology for implementing the state estimation and enhancing the accuracy in large-scale power systems that partially depend on variable renewable energy resources. To determine the actual states of electricity grids, including those of wind and solar power systems, the proposed state estimation method adopts a fast-decoupled weighted least square approach based on the architecture of application common database. Renewable energy modeling is considered on the basis of the point of data acquisition, the type of renewable energy, and the voltage level of the bus-connected renewable energy. Moreover, the proposed algorithm performs accurate bad data processing using inner and outer functions. The inner function is applied to the largest normalized residue method to process the bad data detection, identification and adjustment. While the outer function is analyzed whether the identified bad measurements exceed the condition of Kirchhoff’s current law. In addition, to decrease the topology and measurement errors associated with transformers, a connectivity model is proposed for transformers that use switching devices, and a transformer error processing technique is proposed using a simple heuristic method. To verify the performance of the proposed methodology, we performed comprehensive tests based on a modified IEEE 18-bus test system and a large-scale power system that utilizes renewable energy.

Set-membership filtering for automatic guided vehicles with unknown-but-bounded noises

2021 ◽  
pp. 014233122110436
Author(s):  
Hao Yang ◽  
Yilian Zhang ◽  
Wei Gu ◽  
Fuwen Yang ◽  
Zhiquan Liu
Keyword(s):  
State Estimation ◽  
Estimation Algorithm ◽  
The State ◽  
Estimation Problem ◽  
Filtering Method ◽  
Automatic Guided Vehicles ◽  
Tracking Process ◽  
Set Membership ◽  
Text Filtering ◽  
System States

This paper is concerned with the state estimation problem for an automatic guided vehicle (AGV). A novel set-membership filtering (SMF) scheme is presented to solve the state estimation problem in the trajectory tracking process of the AGV under the unknown-but-bounded (UBB) process and measurement noises. Different from some existing traditional filtering methods, such as Kalman filtering method and [Formula: see text] filtering method, the proposed SMF scheme is developed to provide state estimation sets rather than state estimation points for the system states to effectively deal with UBB noises and reduce the requirement of the sensor precision. Then, in order to obtain the state estimation ellipsoids containing the true states, a set-membership estimation algorithm is designed based on the AGV physical model and S-procedure technique. Finally, comparison examples are presented to illustrate the effectiveness of the proposed SMF scheme for an AGV state estimation problem in the present of the UBB noises.

Sign in / Sign up

Export Citation Format

Share Document