scholarly journals Graphics and statistics for cardiology: designing effective tables for presentation and publication

Heart ◽  
2017 ◽  
Vol 104 (3) ◽  
pp. 192-200 ◽  
Author(s):  
Maarten Boers
Keyword(s):  
Signal To Noise Ratio ◽  
Safety Monitoring ◽  
Clear Understanding ◽  
Signal To Noise ◽  
Clear Vision ◽  
Special Cases ◽  
Scientific Report ◽  
Flow Diagrams ◽  
Meta Analyses ◽  
Clinical Study Reports

Research is of little use if its results are not effectively communicated. Data visualised in tables (and graphs) are key components in any scientific report, but their design leaves much to be desired. This article focuses on table design, following two general principles: clear vision and clear understanding. Clear vision is achieved by maximising the signal to noise ratio. In a table, the signal is the data in the form of numbers, and the noise is the support structure necessary to interpret the numbers. Clear understanding is achieved when the story in the data is told effectively, through organisation of the data and use of text. These principles are illustrated by original and improved tables from recent publications. Two special cases are discussed separately: tables produced by the pharmaceutical industry (in clinical study reports and reports to data safety monitoring boards), and study flow diagrams as proposed by the Consolidated Standards of Reporting Trials and Preferred Reporting Items for Systematic Reviews and Meta-Analyses initiatives.

scholarly journals Generalized Image Reconstruction in Optical Coherence Tomography Using Redundant and Non-Uniformly-Spaced Samples

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7057
Author(s):  
Karim Nagib ◽  
Biniyam Mezgebo ◽  
Namal Fernando ◽  
Behzad Kordi ◽  
Sherif S. Sherif
Keyword(s):  
Fourier Transform ◽  
Image Reconstruction ◽  
Frequency Domain ◽  
Signal To Noise Ratio ◽  
Frame Theory ◽  
Reconstruction Method ◽  
Signal To Noise ◽  
Image Reconstruction Method ◽  
Special Cases ◽  
Oct Image

In this paper, we use Frame Theory to develop a generalized OCT image reconstruction method using redundant and non-uniformly spaced frequency domain samples that includes using non-redundant and uniformly spaced samples as special cases. We also correct an important theoretical error in the previously reported results related to OCT image reconstruction using the Non-uniform Discrete Fourier Transform (NDFT). Moreover, we describe an efficient method to compute our corrected reconstruction transform, i.e., a scaled NDFT, using the Fast Fourier Transform (FFT). Finally, we demonstrate different advantages of our generalized OCT image reconstruction method by achieving (1) theoretically corrected OCT image reconstruction directly from non-uniformly spaced frequency domain samples; (2) a novel OCT image reconstruction method with a higher signal-to-noise ratio (SNR) using redundant frequency domain samples. Our new image reconstruction method is an improvement of OCT technology, so it could benefit all OCT applications.

How light traverses the inverted vertebrate retina

e-Neuroforum ◽  
2014 ◽  
Vol 20 (4) ◽  
Author(s):  
A. Reichenbach ◽  
S. Agte ◽  
M. Francke ◽  
K. Franze
Keyword(s):  
Optical Fibers ◽  
Light Transmission ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Apparent Contradiction ◽  
Retinal Layers ◽  
Clear Vision ◽  
Radial Glial ◽  
Environmental Image ◽  
Pass Through

AbstractIn our eyes, as in the eyes of all vertebrates, images of the environment are projected on­to an inverted retina, where photons must pass through most of the retinal layers before being captured by the light-sensitive cells. Light scattering in these retinal layers must decrease the signal-to-noise ratio of the im­ages and thus interfere with clear vision. Sur­prisingly however, our eyes display splendid visual abilities. This apparent contradiction could be resolved if intraretinal light scatter­ing were to be minimized by built-in opti­cal elements that facilitate light transmission through the tissue. Indeed, we were able to show that one function of radial glial (Mül­ler) cells is to act as effective optical fibers in the living retina, bypassing the light-scatter­ing structures in front of the light-sensitive cells. Each Müller cell serves as a ‘private’ light cable, providing one individual cone photo­receptor cell with its appropriate pixel of the environmental image, thus optimizing spe­cial resolution and visual acuity.

scholarly journals Analog Beamforming and Digital Beamforming on Receive for Range Ambiguity Suppression in Spaceborne SAR

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Pingping Huang ◽  
Wei Xu
Keyword(s):  
Signal To Noise Ratio ◽  
Pulse Repetition Frequency ◽  
Synthetic Aperture ◽  
Signal To Noise ◽  
Digital Beamforming ◽  
Imaging Geometry ◽  
Range Ambiguity ◽  
Special Cases ◽  
Simulation Results ◽  
Receive Antenna

For future spaceborne synthetic aperture radar (SAR) missions, digital beamforming (DBF) on receive in elevation to form a sharp high receive beam will be adopted to improve the signal to noise ratio (SNR) level and suppress range ambiguities. However, in some special cases, range ambiguities may be received by grating lobes with the high receive beam gain, and range ambiguities would not be well suppressed and even may be increased. In this paper, a new receiving approach based on analog beamforming (ABF) and DBF is proposed. According to the spaceborne SAR imaging geometry and the selected pulse repetition frequency (PRF), the antenna patterns of all subapertures of the whole receive antenna in elevation are adjusted by ABF at first. Afterwards, signals from all subapertures in elevation are combined by a real time DBF processor onboard. Since grating lobes could be suppressed by the antenna pattern of the subapertures via ABF, range ambiguities would be well suppressed even if ambiguities are received by grating lobes. Simulation results validate the proposed approach.

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Correlation averaging of two-dimensional crystals: basic strategy and refinements

1986 ◽  
Vol 44 ◽  
pp. 136-139
Author(s):  
W. Baumeister ◽  
R. Rachel ◽  
R. Guckenberger ◽  
R. Hegerl
Keyword(s):  
Low Dose ◽  
Signal To Noise Ratio ◽  
Real Space ◽  
Fourier Domain ◽  
Two Dimensional ◽  
Signal To Noise ◽  
Unit Cells ◽  
Lateral Displacements ◽  
Established Technique ◽  
Crystalline Array

IntroductionCorrelation averaging (CAV) is meanwhile an established technique in image processing of two-dimensional crystals /1,2/. The basic idea is to detect the real positions of unit cells in a crystalline array by means of correlation functions and to average them by real space superposition of the aligned motifs. The signal-to-noise ratio improves in proportion to the number of motifs included in the average. Unlike filtering in the Fourier domain, CAV corrects for lateral displacements of the unit cells; thus it avoids the loss of resolution entailed by these distortions in the conventional approach. Here we report on some variants of the method, aimed at retrieving a maximum of information from images with very low signal-to-noise ratios (low dose microscopy of unstained or lightly stained specimens) while keeping the procedure economical.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Speech Reception in the Presence of Classroom Noise

1979 ◽  
Vol 10 (4) ◽  
pp. 221-230 ◽  
Author(s):  
Veronica Smyth
Keyword(s):  
Signal To Noise Ratio ◽  
Learning Processes ◽  
Speech Discrimination ◽  
Signal To Noise ◽  
Speech Reception ◽  
Monosyllabic Words ◽  
Noise Ratio

Three hundred children from five to 12 years of age were required to discriminate simple, familiar, monosyllabic words under two conditions: 1) quiet, and 2) in the presence of background classroom noise. Of the sample, 45.3% made errors in speech discrimination in the presence of background classroom noise. The effect was most marked in children younger than seven years six months. The results are discussed considering the signal-to-noise ratio and the possible effects of unwanted classroom noise on learning processes.

Effects of Fundamental Frequency Contours on Sentence Recognition in Mandarin-Speaking Children With Cochlear Implants

2020 ◽  
Vol 63 (11) ◽  
pp. 3855-3864
Author(s):  
Wanting Huang ◽  
Lena L. N. Wong ◽  
Fei Chen ◽  
Haihong Liu ◽  
Wei Liang
Keyword(s):  
Cochlear Implants ◽  
Fundamental Frequency ◽  
Signal To Noise Ratio ◽  
Lexical Tone ◽  
Signal To Noise ◽  
Sentence Recognition ◽  
Test Conditions ◽  
Age Appropriate ◽  
F0 Contour ◽  
Appropriate Sentences

Purpose Fundamental frequency (F0) is the primary acoustic cue for lexical tone perception in tonal languages but is processed in a limited way in cochlear implant (CI) systems. The aim of this study was to evaluate the importance of F0 contours in sentence recognition in Mandarin-speaking children with CIs and find out whether it is similar to/different from that in age-matched normal-hearing (NH) peers. Method Age-appropriate sentences, with F0 contours manipulated to be either natural or flattened, were randomly presented to preschool children with CIs and their age-matched peers with NH under three test conditions: in quiet, in white noise, and with competing sentences at 0 dB signal-to-noise ratio. Results The neutralization of F0 contours resulted in a significant reduction in sentence recognition. While this was seen only in noise conditions among NH children, it was observed throughout all test conditions among children with CIs. Moreover, the F0 contour-induced accuracy reduction ratios (i.e., the reduction in sentence recognition resulting from the neutralization of F0 contours compared to the normal F0 condition) were significantly greater in children with CIs than in NH children in all test conditions. Conclusions F0 contours play a major role in sentence recognition in both quiet and noise among pediatric implantees, and the contribution of the F0 contour is even more salient than that in age-matched NH children. These results also suggest that there may be differences between children with CIs and NH children in how F0 contours are processed.

Quantifying the Effects of Background Speech Babble on Preschool Children's Novel Word Learning in a Multisession Paradigm: A Preliminary Study

2020 ◽  
Vol 63 (1) ◽  
pp. 345-356
Author(s):  
Meital Avivi-Reich ◽  
Megan Y. Roberts ◽  
Tina M. Grieco-Calub
Keyword(s):  
Word Learning ◽  
Signal To Noise Ratio ◽  
Preschool Age ◽  
Exposure Condition ◽  
Signal To Noise ◽  
Verbal Recall ◽  
Referent Selection ◽  
Main Effect ◽  
Noise Ratio ◽  
Novel Word Learning

Purpose This study tested the effects of background speech babble on novel word learning in preschool children with a multisession paradigm. Method Eight 3-year-old children were exposed to a total of 8 novel word–object pairs across 2 story books presented digitally. Each story contained 4 novel consonant–vowel–consonant nonwords. Children were exposed to both stories, one in quiet and one in the presence of 4-talker babble presented at 0-dB signal-to-noise ratio. After each story, children's learning was tested with a referent selection task and a verbal recall (naming) task. Children were exposed to and tested on the novel word–object pairs on 5 separate days within a 2-week span. Results A significant main effect of session was found for both referent selection and verbal recall. There was also a significant main effect of exposure condition on referent selection performance, with more referents correctly selected for word–object pairs that were presented in quiet compared to pairs presented in speech babble. Finally, children's verbal recall of novel words was statistically better than baseline performance (i.e., 0%) on Sessions 3–5 for words exposed in quiet, but only on Session 5 for words exposed in speech babble. Conclusions These findings suggest that background speech babble at 0-dB signal-to-noise ratio disrupts novel word learning in preschool-age children. As a result, children may need more time and more exposures of a novel word before they can recognize or verbally recall it.

Sign in / Sign up

Export Citation Format

Share Document