Synthesis, characterization, and adsorption properties of a Ce(III)-imprinted polymer supported by mesoporous SBA-15 matrix by a surface molecular imprinting technique

2014 ◽  
Vol 92 (3) ◽  
pp. 257-266 ◽  
Author(s):  
Yan Liu ◽  
Sujun Tian ◽  
Xiangguo Meng ◽  
Xiaohui Dai ◽  
Zhanchao Liu ◽  
...  
Keyword(s):  
Molecular Imprinting ◽  
Metal Ion ◽  
Ph Value ◽  
Matrix Material ◽  
Infrared Spectrometry ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Imprinted Polymer ◽  
Surface Molecular Imprinting ◽  
Ion Imprinted

A new Ce(III) ion imprinted polymer (Ce(III)-IIP), which can be used for selective removal of Ce(III) from aqueous solutions, was successfully prepared based on the matrix material of ordered mesoporous silica SBA-15 by surface molecular imprinting technology. The prepared polymer was characterized by X-ray diffraction, transmission electron microscopy, Fourier transmission infrared spectrometry, and nitrogen adsorption−desorption isotherm. The results showed that Ce(III)-IIP kept a uniform framework mesoporosity of SBA-15 but a decrease in Brunauer−Emmett−Teller surface area, pore volume, and average pore diameter. Batch adsorption tests were researched on the effects of solution pH value, mass of sorbent, and contact time at different initial Ce(III) concentrations and temperatures. The kinetic data well fitted the pseudo-second-order kinetic model compared with the pseudo-first-order model. The adsorption isotherm fitted Langmuir model and the dimensionless separation factor RL indicated favorable adsorption. In addition, the Gibbs free energy (ΔG0), entropy (ΔS0), and enthalpy (ΔH0) were calculated from the adsorption data. These values suggested that the adsorption of Ce(III) onto Ce(III)-IIP was a spontaneous and endothermic nature of the process. The relative selectivity coefficients for different metal ion were larger than that of the nonimprinted polymer, indicating that Ce(III)-IIP synthesized for Ce(III) had a higher selectivity specialism for this ion.

Thermo-responsive ion imprinted polymer on the surface of magnetic carbon microspheres for identification and removal of low-concentrations of Cu2+

2018 ◽  
Vol 15 (5) ◽  
pp. 306 ◽  
Author(s):  
Weifeng Liu ◽  
Lei Qin ◽  
Zhuolin An ◽  
Lin Chen ◽  
Xuguang Liu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Copper Ions ◽  
Selective Recognition ◽  
Infrared Spectrometry ◽  
Order Kinetic ◽  
Carbon Microspheres ◽  
Imprinted Polymer ◽  
Low Concentrations ◽  
Ion Imprinted ◽  
Magnetic Carbon

Environmental contextBecause of the multiple industrial applications of metals, contamination by metal ions is widespread and can at times endanger the environment and the health of human beings. We prepared ion-imprinted adsorbents to achieve selective recognition and smart separation of low-concentrations of copper ions from water. These smart imprinted materials have high potential for selective adsorption and removal of contaminant copper ions, particularly at very low concentrations. AbstractA temperature-responsive magnetic adsorbent (poly(N-propyl acrylamide) grafted magnetic carbon microspheres, Cu2+-IIP) was synthesised by ion imprinting technology for low concentration Cu2+ removal. Cu2+-IIP was prepared by using N-propyl acrylamide as a thermo-sensitive functional monomer, N,N-methylene-bis-acrylamide as a cross-linker and ammonium persulfate as an initiator. The morphologies and microstructures of samples were characterised by transmission electron microscopy, Fourier transform infrared spectrometry, thermogravimetry and vibrating sample magnetometry. Adsorption experiments were conducted in terms of kinetics, isotherms and selective recognition adsorption at low feed concentrations. Results indicate that Cu2+-IIP possesses good recognition selectivity and affinity for Cu2+, and can be separated from the treated solution quickly by applying an external magnetic field. The adsorption capacity towards Cu2+ depends on temperature and reaches a maximum value of 45.46 mg g−1 at 35 °C, higher than that of the non-imprinted polymer. The adsorption behaviour of Cu2+ on Cu2+-IIP can be well defined with both the pseudo-second-order kinetic model and Langmuir isotherm model. Cu2+-IIP performs good adsorption selectivity towards Cu2+ because the relative selectivity factors of Cu2+ with respect to Ni2+, Zn2+ and Cd2+ are 7.14, 7.60 and 6.77, respectively. The adsorption capacity of Cu2+-IIP remained 88.41 % after five cycles.

scholarly journals Preparation of Nitrosulfonated Humic Acid-based Ion-imprinted Polymer and Study on Its Adsorption Properties

2021 ◽  
Author(s):  
An Wang ◽  
Xiaoran Sun ◽  
Yinuo Yan ◽  
Simeng Bian ◽  
Kaili Fan ◽  
...  
Keyword(s):  
Humic Acid ◽  
Crosslinking Agent ◽  
Organic Polymer ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Ion Imprinted Polymer ◽  
Imprinted Polymer ◽  
Ion Imprinted ◽  
Ion Imprinted Polymers

Abstract Ion imprinted polymer, a kind of high molecular organic polymer, which can separate and enrich various metal ions in water by changing the adsorption conditions. Used humic acid as raw materials, used HNO3 and H2SO4 as modifiers to synthesize nitrosulfonated humic acid, then used it as substrate, NIPAM as the functional monomer, Pb2+ as the template ion, MBA as the crosslinking agent, K2S2O8 and NaHSO3 as initiators to prepare lead ion imprinted polymers after cross-linking reaction. Used SEM, FT-IR, TG-DSC to characterize the obtained product, and explored the structure and performance of the product. The adsorption performance of IIPs (NSA/NIPAM) was studied by ultraviolet-visible spectrophotometry (UV-vis). The results show that the maximum adsorption capacity of IIPs (NSA/NIPAM) for Pb2+ is 81.33 mg/g, the optimal number of cycles of IIPs (NSA/NIPAM) is 10, In the presence of competing ions Cu2+ and Cd2+, selectivity coefficients are 18.04 (Pb2+/Cu2+) and 19.39 (Pb2+/Cd2+). The results of simulating the thermodynamic adsorption process of the polymers with Langmuir and Freundlich thermodynamic adsorption models show that the imprinted polymer conform to the second-order kinetic model and the Langmuir thermodynamic model, and belong to monolayer chemisorption.

Adsorption of cadmium by biochar produced from pyrolysis of corn stalk in aqueous solution

2016 ◽  
Vol 74 (6) ◽  
pp. 1335-1345 ◽  
Author(s):  
Fengfeng Ma ◽  
Baowei Zhao ◽  
Jingru Diao
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Ionic Strength ◽  
Ph Value ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Corn Stalk ◽  
Adsorbent Dosage ◽  
Initial Ph ◽  
Adsorbent Particle

The purpose of this work is to investigate adsorption characteristic of corn stalk (CS) biochar for removal of cadmium ions (Cd2+) from aqueous solution. Batch adsorption experiments were carried out to evaluate the effects of pH value of solution, adsorbent particle size, adsorbent dosage, and ionic strength of solution on the adsorption of Cd2+ onto biochar that was pyrolytically produced from CS at 300 °C. The results showed that the initial pH value of solution played an important role in adsorption. The adsorptive amount of Cd2+ onto the biochar decreased with increasing the adsorbent dosage, adsorbent particle size, and ionic strength, while it increased with increasing the initial pH value of solution and temperature. Cd2+ was removed efficiently and quickly from aqueous solutions by the biochar with a maximum capacity of 33.94 mg/g. The adsorption process was well described by the pseudo-second-order kinetic model with the correlation coefficients greater than 0.986. The adsorption isotherm could be well fitted by the Langmuir model. The thermodynamic studies showed that the adsorption of Cd2+ onto the biochar was a spontaneous and exothermic process. The results indicate that CS biochar can be considered as an efficient adsorbent.

scholarly journals Sorption Efficiency of a New Sorbent towards Cadmium(II): Methylphosphonic Acid Grafted Polystyrene Resin

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Nacer Ferrah ◽  
Omar Abderrahim ◽  
Mohamed Amine Didi ◽  
Didier Villemin
Keyword(s):  
Metal Ion ◽  
Ph Value ◽  
Ion Concentration ◽  
Methylphosphonic Acid ◽  
Order Kinetic ◽  
Elementary Analysis ◽  
Optimum Ph ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Polystyrene Resin

A new chelating polymeric sorbent has been developed using polystyrene resin grafted with phosphonic acid. After characterization by FTIR and elementary analysis, the new resin has been investigated in liquid-solid extraction of cadmium(II). The results indicated that phosphonic resin could adsorb Cd(II) ion effectively from aqueous solution. The adsorption was strongly dependent on the pH of the medium and the optimum pH value level for better sorption was between 3.2 and 5.2. The influence of other analytical parameters including contact time, amount of resin, metal ion concentration, and the presence of some electrolytes was investigated. The maximum uptake capacity of Cd(II) ions was 37,9 mg·g−1grafted resin at ambient temperature, at an initial pH value of 5.0. The overall adsorption process was best described by pseudo second-order kinetic. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. Furthermore, more than 92% of Cd(II) could be eluted by using 1.0 mol·L−1HCl in one cycle.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

Preparation of Cu2+ Imprinted Polymer Microspheres and its Application for the Determination of Cu2+ in Water

2013 ◽  
Vol 389 ◽  
pp. 7-11 ◽  
Author(s):  
Yong Feng Kang ◽  
Hua Jin Shi ◽  
Lin Ge Yang ◽  
Jun Xia Kang ◽  
Zi Qi Zhao
Keyword(s):  
Water Samples ◽  
Tap Water ◽  
Absorption Spectrometry ◽  
Ion Imprinted Polymer ◽  
Imprinted Polymer ◽  
Surface Molecular Imprinting ◽  
Mixed Aqueous Solution ◽  
Ion Imprinted ◽  
Surface Molecular Imprinting Technique

Copper (II) imprinted polymer particles were prepared by surface molecular imprinting technique in toluenewith 1-hy-droxy-4-(prop-2-enyloxy)-9, 10-anthraquinone (AQ) as the functional monomer, silica gel as the carrier.The effect of adsorption time, acidity, temperature and concentration on adsorption capacity was investigated by atomic absorption spectrometry. Selectivity for Cu2+ of the prepared polymer was also studied in mixed aqueous solution, the ion imprinted polymer were applied to the determination of Cu2+ in river and tap water samples, the concentration of Cu2+ in water samples were determined and the recoveries of Cu2+ in river and tap water samples were 110.7% and 109.2%, respectively.

scholarly journals Biosorption of Cr(III) from aqueous solution using an agricultural by-product jute stick powder: Equilibrium and kinetic studies

2018 ◽  
Vol 9 (3) ◽  
pp. 202-212 ◽  
Author(s):  
Mohammad Nasir Uddin ◽  
Jahangir Alam ◽  
Syeda Rahimon Naher
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Metal Ion ◽  
Water Solution ◽  
Low Cost ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Experimental Conditions

The adsorption capacity of chromium(III) from synthetic waste water solution by a low cost biomaterial, Jute Stick Powder (JSP)was examined. A series of batch experiments were conducted at different pH values, adsorbent dosage and initial chromium concentration to investigate the effects of these experimental conditions. To analyze the metal adsorption on to the JSP, most common adsorption isotherm models were applied. To study the reaction rate, the kinetic and diffusion models were also applied. The morphological structure and variation of functional groups in the JSP before and after adsorption was examined by scanning electron microscope (SEM) and Fourier transform infrared spectrometry (FT-IR). Maximum chromium removal capacities of JSP was 84.34%with corresponding equilibrium uptake 8.4 mg/g from 50 mg/L of synthetic metal solution in 60 minutes of contact time at pH = 6.0 and 28 °C with continuous stirring at 180 rpm. The percent sorption of the biomass decreased with increasing concentration of metal ion but increased with decreasing pH, increasing contact time and adsorbent doses. Data for this study indicated a good correspondence with both isotherms of Langmuir and Freundlich isotherm. The analysis of kinetic indicated that Chromium was consistent with the second-order kinetic adsorption model. The rate of removal of Cr(III) ions from aqueous solution by JSP was found rapid initially within 5-30 minutes and reached in equilibrium in about 40 minutes. The investigation revealed that JSP, a low cost agricultural byproduct, was a potential adsorbent for removal of heavy metal ions from aqueous solution.

scholarly journals Adsorption of azo and anthraquinone dye by using watermelon peel powder and corn peel powder: equilibrium and kinetic studies

2019 ◽  
Vol 10 (1) ◽  
pp. 4706-4713
Keyword(s):  
Ph Value ◽  
Citrullus Lanatus ◽  
Low Cost ◽  
Industrial Effluent ◽  
Essential Element ◽  
Kinetic Studies ◽  
Color Removal ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Anthraquinone Dye

Clean water is an essential element for the survival of humans and nature. However, the tremendous growth in industrialization has degraded the water quality by introducing pollutants such as dyes into the main water bodies such as rivers. In this research, the locally collected agricultural wastes such as watermelon peel (Citrullus lanatus) and corn peel (Zea Mays) were tested on two types of synthetics dyes such Remazol Brilliant Violet 5R (RBV5) and Remazol Brilliant Blue R (RBBR). From the screening test, the watermelon peel achieved the highest color removal percentage with 44.8% and followed by corn’s peel with 18.89%. Both adsorbents were selected for the batch adsorption test by varying the parameters. Based on the results achieved from the batch adsorption test, the optimum removal of dye particles was achieved at the lowest concentration of dye solutions. The optimum pH value to achieve a high percentage of color removal is at pH3, which is acidic. In this case, the 3 g of adsorbent dosage achieved the highest percentage of color removal compared to 5 g. This could due to insufficient contact time. In addition, the chemical and physical characteristics of the adsorbents were analyzed using FESEM and FTIR respectively. By analyzing the surface texture and functional group, differences in the adsorbents before and after adsorption were noticed. Besides that, based on the obtained R2 values from the linear plotting, the Temkin isotherm model and pseudo-second-order kinetic model fitted well compared to other isotherm and kinetic models. In conclusion, the watermelon peel and corn peel are capable of removing dye particles in the industrial effluent under selective conditions with low cost while being environmentally friendly.

scholarly journals Adsorption and desorption studies of <i>Delonix regia</i> pods and leaves: removal and recovery of Ni(II) and Cu(II) ions from aqueous solution

2020 ◽  
Vol 13 (2) ◽  
pp. 15-27 ◽  
Author(s):  
Bolanle M. Babalola ◽  
Adegoke O. Babalola ◽  
Cecilia O. Akintayo ◽  
Olayide S. Lawal ◽  
Sunday F. Abimbade ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Ion ◽  
Agricultural Waste ◽  
Waste Product ◽  
Operating Conditions ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Delonix Regia

Abstract. In this study, the adsorption of Ni(II) and Cu(II) ions from aqueous solutions by powdered Delonix regia pods and leaves was investigated using batch adsorption techniques. The effects of operating conditions such as pH, contact time, adsorbent dosage, metal ion concentration and the presence of sodium ions interfering with the sorption process were investigated. The results obtained showed that equilibrium sorption was attained within 30 min of interaction, and an increase in the initial concentration of the adsorbate, pH and adsorbent dosage led to an increase in the amount of Ni(II) and Cu(II) ions adsorbed. The adsorption process followed the pseudo-second-order kinetic model for all metal ions' sorption. The equilibrium data fitted well with both the Langmuir and Freundlich isotherms; the monolayer adsorption capacity (Q0 mg g−1) of the Delonix regia pods and leaves was 5.88 and 5.77 mg g−1 for Ni(II) ions respectively and 9.12 and 9.01 mg g−1 for Cu(II) ions respectively. The efficiency of the powdered pods and leaves of Delonix regia with respect to the removal of Ni(II) and Cu(II) ions was greater than 80 %, except for the sorption of Ni(II) ions onto the leaves. The desorption study revealed that the percentage of metal ions recovered from the pods was higher than that recovered from the leaves at various nitric acid concentrations. This study proves that Delonix regia biomass, an agricultural waste product (“agro-waste”), could be used to remove Ni(II) and Cu(II) ions from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document