scholarly journals Adsorption and desorption studies of <i>Delonix regia</i> pods and leaves: removal and recovery of Ni(II) and Cu(II) ions from aqueous solution

2020 ◽  
Vol 13 (2) ◽  
pp. 15-27 ◽  
Author(s):  
Bolanle M. Babalola ◽  
Adegoke O. Babalola ◽  
Cecilia O. Akintayo ◽  
Olayide S. Lawal ◽  
Sunday F. Abimbade ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Ion ◽  
Agricultural Waste ◽  
Waste Product ◽  
Operating Conditions ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Delonix Regia

Abstract. In this study, the adsorption of Ni(II) and Cu(II) ions from aqueous solutions by powdered Delonix regia pods and leaves was investigated using batch adsorption techniques. The effects of operating conditions such as pH, contact time, adsorbent dosage, metal ion concentration and the presence of sodium ions interfering with the sorption process were investigated. The results obtained showed that equilibrium sorption was attained within 30 min of interaction, and an increase in the initial concentration of the adsorbate, pH and adsorbent dosage led to an increase in the amount of Ni(II) and Cu(II) ions adsorbed. The adsorption process followed the pseudo-second-order kinetic model for all metal ions' sorption. The equilibrium data fitted well with both the Langmuir and Freundlich isotherms; the monolayer adsorption capacity (Q0 mg g−1) of the Delonix regia pods and leaves was 5.88 and 5.77 mg g−1 for Ni(II) ions respectively and 9.12 and 9.01 mg g−1 for Cu(II) ions respectively. The efficiency of the powdered pods and leaves of Delonix regia with respect to the removal of Ni(II) and Cu(II) ions was greater than 80 %, except for the sorption of Ni(II) ions onto the leaves. The desorption study revealed that the percentage of metal ions recovered from the pods was higher than that recovered from the leaves at various nitric acid concentrations. This study proves that Delonix regia biomass, an agricultural waste product (“agro-waste”), could be used to remove Ni(II) and Cu(II) ions from aqueous solution.

scholarly journals Efficient Removal of Toxic mMetal Ions (Pb(II) and Hg(II) Ions in Single Component Systems by Adsorption on Romanian Clay Material

2020 ◽  
Vol 71 (7) ◽  
pp. 37-47 ◽  
Author(s):  
Bianca Azamfire ◽  
Dumitru Bulgariu ◽  
Laura Bulgariu
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Clay Material ◽  
Order Kinetic ◽  
Efficient Removal ◽  
Adsorbent Dosage ◽  
Short Contact Time

In this study, a local natural clay material was used for the efficient removal of Pb(II)ions and Hg(II) ions from aqueous media, in batch system. The adsorptive potential of clay material was testes at different initial solution pH, adsorbent dosage, contact time and initial heavy metal ions concentration and room temperature (20  2C). The highest adsorption efficiency of clay material was found at initial pH of 7.0 in case of Pb(II) ions, and 2.0 in case of Hg(II) ions, while the adsorbent dosage had the same value (4 g/L) for both metal ions. The adsorption equilibrium is very fast and was reach within 10 min. The modelling of experimental data showed that the adsorption processes followed the Freundlich isotherm model and pseudo-second order kinetic model. Detailed analysis of the experimental data indicate that the retention of Pb(II) and Hg(II) ions from aqueous solution on clay materials involves two processes, one of adsorption and the other of precipitation, whose succession depends on the speciation form of the metal ion in aqueous solution. However, the high adsorption capacity and short contact time are important characteristics which suggest the potential use of this clay material in environmental remediation processes.

scholarly journals Adsorption and Desorption studies of <i>Delonix regiapods</i> and leaves: Removal and recovery of Ni(II) and Cu(II) ions from aqueous solution

2019 ◽  
Author(s):  
Bolanle M. Babalola ◽  
Adegoke O. Babalola ◽  
Cecilia O. Akintayo ◽  
Olushola S. Ayanda ◽  
Sunday F. Abimbade ◽  
...  
Keyword(s):  
Metal Ions ◽  
Sorption Process ◽  
Operating Conditions ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Delonix Regia ◽  
Freundlich Isotherms ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Desorption Study

Abstract. In this study, the adsorption of Ni(II) and Cu(II) ions from aqueous solutions by powdered pods and leaves of Delonix regia was investigated by batch adsorption techniques. The effects of operating conditions such as pH, contact time, metal ions concentration and the presence of sodium ions interfering on the sorption process were investigated. The results obtained showed that the equilibrium sorption was attained within 30 min of interaction and the adsorption process followed the pseudo-second-order kinetic model for all the metal sorption with the exception of Cu(II) sorption on the leaves. The equilibrium data fitted well with both the Langmiur and Freundlich Isotherms; the desorption study revealed that the percentage of metal ions recovered from the pods were higher than the leaves at various concentration of nitric acid. This study has proven that Delonix regia biomass, an agro-waste could be used for removing Ni(II) and Cu(II) ions from wastewater.

scholarly journals Batch Sorption Experiments: Langmuir and Freundlich Isotherm Studies for the Adsorption of Textile Metal Ions onto Teff Straw (Eragrostis tef) Agricultural Waste

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mulu Berhe Desta
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Low Cost ◽  
Agricultural Waste ◽  
Equilibrium Concentration ◽  
Eragrostis Tef ◽  
Batch Adsorption ◽  
Textile Effluents

Adsorption of heavy metals (Cr, Cd, Pb, Ni, and Cu) onto Activated Teff Straw (ATS) has been studied using batch-adsorption techniques. This study was carried out to examine the adsorption capacity of the low-cost adsorbent ATS for the removal of heavy metals from textile effluents. The influence of contact time, pH, Temperature, and adsorbent dose on the adsorption process was also studied. Results revealed that adsorption rate initially increased rapidly, and the optimal removal efficiency was reached within about 1 hour. Further increase in contact time did not show significant change in equilibrium concentration; that is, the adsorption phase reached equilibrium. The adsorption isotherms could be fitted well by the Langmuir model. The value in the present investigation was less than one, indicating that the adsorption of the metal ion onto ATS is favorable. After treatment with ATS the levels of heavy metals were observed to decrease by 88% (Ni), 82.9% (Cd), 81.5% (Cu), 74.5% (Cr), and 68.9% (Pb). Results indicate that the freely abundant, locally available, low-cost adsorbent, Teff straw can be treated as economically viable for the removal of metal ions from textile effluents.

Extraction of Heavy Metals from Aqueous Medium by Husk Biomass: Adsorption Isotherm, Kinetic and Thermodynamic study

2019 ◽  
Vol 233 (2) ◽  
pp. 201-223 ◽  
Author(s):  
Khalida Naseem ◽  
Rahila Huma ◽  
Aiman Shahbaz ◽  
Jawaria Jamal ◽  
Muhammad Zia Ur Rehman ◽  
...  
Keyword(s):  
Metal Ions ◽  
Aqueous Medium ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Adsorption Sites ◽  
Order Kinetic Model

Abstract This study describes the adsorption of Cu (II), Co (II) and Ni (II) ions from wastewater on Vigna radiata husk biomass. The ability of adsorbent to capture the metal ions has been found to be in the order of Ni (II)>Co (II) and Cu (II) depending upon the size and nature of metal ions to be adsorbed. It has been observed that percentage removal of Cu (II), Co (II) and Ni (II) ions increases with increase of adsorbent dosage, contact time and pH of the medium but up to a certain extent. Maximum adsorption capacity (qmax) for Cu (II), Co (II) and Ni (II) ions has been found to be 11.05, 15.04 and 19.88 mg/g, respectively, under optimum conditions of adsorbent dosage, contact time and pH of the medium. Langmuir model best fits the adsorption process with R2 value approaches to unity for all metal ions as compared to other models because adsorption sites are seemed to be equivalent and only monolayer adsorption may occur as a result of binding of metal ion with a functional moiety of adsorbent. Pseudo second order kinetic model best interprets the adsorption process of Cu (II), Co (II) and Ni (II) ions. Thermodynamic parameters such as negative value of Gibbs energy (∆G°) gives information about feasibility and spontaneity of the process. Adsorption process was found to be endothermic for Cu (II) ions while exothermic for Co (II) and Ni (II) ions as signified by the value of enthalpy change (∆H°). Husk biomass was recycled three times for removal of Ni (II) from aqueous medium to investigate its recoverability and reusability. Moreover V. radiata husk biomass has a potential to extract Cu (II) and Ni (II) from electroplating wastewater to overcome the industrial waste water pollution.

Adsorption of cadmium by biochar produced from pyrolysis of corn stalk in aqueous solution

2016 ◽  
Vol 74 (6) ◽  
pp. 1335-1345 ◽  
Author(s):  
Fengfeng Ma ◽  
Baowei Zhao ◽  
Jingru Diao
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Ionic Strength ◽  
Ph Value ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Corn Stalk ◽  
Adsorbent Dosage ◽  
Initial Ph ◽  
Adsorbent Particle

The purpose of this work is to investigate adsorption characteristic of corn stalk (CS) biochar for removal of cadmium ions (Cd2+) from aqueous solution. Batch adsorption experiments were carried out to evaluate the effects of pH value of solution, adsorbent particle size, adsorbent dosage, and ionic strength of solution on the adsorption of Cd2+ onto biochar that was pyrolytically produced from CS at 300 °C. The results showed that the initial pH value of solution played an important role in adsorption. The adsorptive amount of Cd2+ onto the biochar decreased with increasing the adsorbent dosage, adsorbent particle size, and ionic strength, while it increased with increasing the initial pH value of solution and temperature. Cd2+ was removed efficiently and quickly from aqueous solutions by the biochar with a maximum capacity of 33.94 mg/g. The adsorption process was well described by the pseudo-second-order kinetic model with the correlation coefficients greater than 0.986. The adsorption isotherm could be well fitted by the Langmuir model. The thermodynamic studies showed that the adsorption of Cd2+ onto the biochar was a spontaneous and exothermic process. The results indicate that CS biochar can be considered as an efficient adsorbent.

Zinc removal from aqueous solution using novel adsorbent MISCBA

2016 ◽  
Vol 6 (3) ◽  
pp. 377-388 ◽  
Author(s):  
Ibrahim Umar Salihi ◽  
Shamsul Rahman Muhamed Kutty ◽  
Muhamed Hasnain Isa ◽  
Nasir Aminu
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Metal Ions ◽  
Contact Time ◽  
Adsorption Process ◽  
Negative Impact ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Adsorbent Dosage ◽  
Zinc Removal

Pollution caused by heavy metals has become a serious problem to the environment nowadays. The treatment of wastewater containing heavy metals continues to receive attention because of their toxicity and negative impact on the environment. Recently, various types of adsorbents have been prepared for the uptake of heavy metals from wastewater through the batch adsorption technique. This study focused on the removal of zinc from aqueous solution using microwave incinerated sugarcane bagasse ash (MISCBA). MISCBA was produced using microwave technology. The influence of some parameters such as pH, contact time, initial metal concentration and adsorbent dosage on the removal of zinc was investigated. The competition between H+ and metal ions has affected zinc removal at a low pH value. Optimum conditions for zinc removal were achieved at pH 6.0, contact time 180 min and adsorbent dosage of 10 g/L, respectively. The maximum adsorption capacity for the removal of zinc was found to be 28.6 mg/g. The adsorption process occurred in a multilayered surface of the MISCBA. Chemical reaction was the potential mechanism that regulates the adsorption process. MISCBA can be used as an effective and cheap adsorbent for treatment of wastewater containing zinc metal ions.

scholarly journals Cauliflower Leave, an Agricultural Waste Biomass Adsorbent, and Its Application for the Removal of MB Dye from Aqueous Solution: Equilibrium, Kinetics, and Thermodynamic Studies

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Seraj Anwar Ansari ◽  
Fauzia Khan ◽  
Anees Ahmad
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Methylene Blue ◽  
Agricultural Waste ◽  
Second Order ◽  
Batch Adsorption ◽  
Agricultural Crop ◽  
Order Kinetic ◽  
Basic Dye ◽  
Pseudo Second Order

Cauliflower leaf powder (CLP), a biosorbent prepared from seasonal agricultural crop waste material, has been employed as a prospective adsorbent for the removal of a basic dye, methylene blue (MB) from aqueous solution by the batch adsorption method under varying conditions, namely, initial dye concentration, adsorbent dose, solution pH, and temperature. Characterization of the material by FTIR and SEM indicates the presence of functional groups and rough coarse surface suitable for the adsorption of methylene blue over it. Efforts were made to fit the isotherm data using Langmuir, Freundlich, and Temkin equation. The experimental data were best described by Freundlich isotherm model, with an adsorption capacity of 149.22 mg/g at room temperature. To evaluate the rate of methylene blue adsorption onto CLP, pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were employed. The experimental data were best described by the pseudo-second-order kinetic model. Evaluation of thermodynamic parameters such as changes in enthalpy, entropy, and Gibbs’ free energy showed the feasible, spontaneous, and exothermic nature of the adsorption process. On the basis of experimental results obtained, it may be concluded that the CLP prepared from agricultural waste has considerable potential as low-cost adsorbent in wastewater treatment for the removal of basic dye, MB.

scholarly journals Investigation of effectiveness of pyrolysis products on removal of alizarin yellow GG from aqueous solution: a comparative study with commercial activated carbon

2020 ◽  
Vol 81 (6) ◽  
pp. 1191-1208 ◽  
Author(s):  
Nihan Kaya ◽  
Zeynep Yildiz Uzun
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Surface Area ◽  
Bet Surface Area ◽  
Walnut Shell ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Pine Cone ◽  
Alizarin Yellow

Abstract The increasing use of dyestuff in industrial applications brings with it environmental problems. These dyes, which are an eco-toxic hazard, are common water pollutants, even at very low concentrations in water resources. Therefore, they must be removed in an economical way. In this study, low-cost biosorbents such as pine cone char, walnut shell char, and hazelnut shell char were prepared by pyrolysis process at different carbonization temperatures in the range of 400–700 °C. Biochars with the highest surface area were used to remove alizarin yellow GG from aqueous solution and the adsorption capacities of these materials were compared to commercially available activated carbon. Biomasses and prepared biochars were characterized using Fourier transform infrared spectroscopy, thermogravimetric/differential thermogravimetry analysis, Brunauer–Emmett–Teller (BET), scanning electron microscopy/energy dispersive X-ray spectroscopy, partial and elemental analysis techniques. Operational parameters such as contact time, temperature, pH, adsorbent dosage, and initial dye concentration were considered as variables for the batch adsorption experiments. Among the biochars used, the highest adsorption efficiency (82%) was obtained in pine cone char (BET surface area 259.74 m2/g) at pH = 3, T = 45 °C, adsorbent dosage of 8 g/L, and initial dye concentration of 20 ppm. The adsorption mechanism has been investigated by applying different kinetic and isotherm models with the aid of time-dependent adsorption data. The adsorption process was best described by Langmuir isotherm and pseudo-second order kinetic model.

scholarly journals Adsorption of PB(II) Ions from Aqueous Solution Using Functionalized and Carbonized Groundnut Shell

2019 ◽  
pp. 1-11
Author(s):  
Ikemefuna Usifoh ◽  
Rosemary Odinigwe ◽  
M. U. Obidiegwu
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Metal Ion ◽  
Ion Concentration ◽  
Lead Ion ◽  
Batch Adsorption ◽  
Adsorbent Dosage ◽  
Metal Ion Removal ◽  
Increase With Increase ◽  
Groundnut Shell

Groundnut shells were modified through functionalization and carbonization processes to produce three distinct adsorbents for adsorption of Pb (II) ions from aqueous solution. Adsorption studies was carried out under varying conditions of pH, contact time, adsorbent dosage, metal ion concentration and temperature after the results were documented. Batch adsorption experiments revealed that the adsorbents performed optimally at a pH of 11 and the adsorption process was dependent upon changes in contact time. Adsorption capacity was observed to increase with increase in adsorbent dosage and decrease with increase in lead ion concentration across all adsorbents. Highest metal ion removal was by the GS-KOHC where 239.86 mg/g of lead ion was removed from the aqueous solution followed by the GS-HCLC at 228.0750 mg/g and then the GS-TPP adsorbent was least at 179.1235 mg/g.

scholarly journals Nano sized carbonized waste biomass for heavy metal ion remediation

2014 ◽  
Vol 16 (4) ◽  
pp. 6-13 ◽  
Author(s):  
Garima Mahajan ◽  
Dhiraj Sud
Keyword(s):  
Heavy Metal ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Agricultural Waste ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Waste Biomass

Abstract Utilization of agricultural waste material with approach to enhance the heavy metal remediation properties by carbonizing the biomass at nano size particles has been explored in present investigation from aqueous solutions. In this study the lignocellulosic, nitrogenous agricultural waste biomass Delbergia sissoo pods (DSP) has been tried for sequestering of Cd (II), Pb (II) and Ni (II) metal ions from aqueous solutions. Batch experiments were performed for removal of targeted metal ions keeping in consideration the preliminary affecting parameters such as effect of adsorption dose, pH, initial metal ion concentration, stirring speed and contact time. The sorption studies were analyzed by using, Freundlic isotherm and Langmuir isotherm models. The kinetics of the process was evaluated by pseudo pseudo-first order and pseudo second order kinetic models. Studies reveal that the equilibrium was achieved with in 30 min of the contact time at optimized parameters. Analytical studies of biosorbent were done by means of FT-IR, SEM and XRD. Desorption experiments were carried out using HCl solution with a view to regenerate the spent adsorbent and to recover the adsorbed metal ions.

Sign in / Sign up

Export Citation Format

Share Document