Diurnal Extrema Timing—A New Climatological Parameter?

We address the following question: Are turning points of daily air temperature function a piece of relevant climatological information worth recording and analyzing? Diurnal Extrema Timing (DET) are daily occurrence times of air temperature minimum and maximum. Although unrecognized and unrecorded as a meteorological variable, the exact timing of daily temperature extrema plays a crucial role in the characterization of air temperature variability. In this study, we introduce the DET concept and assess the plausibility of this potential parameter in detecting temperature extrema timing changes. Conceptualization of the DET parameter has, for a primary goal, the supplementation of vital spatial information to the daily measurements of air temperature extrema. The elementary analysis of annual trends of daily DET examines the significance of this parameter in describing changes in the time domain of air temperature variability. The introduction of the new Climate Parameter Sensitivity Index (CPSI) for evaluating the susceptibility of climate parameters to climate change directs attention to the importance of the systematic acquisition of the timing of daily extrema in climate observations. The results of this study reveal the timing of daily air temperature maximum as the most vulnerable to climate change among temperature and timing extrema indices.

Structure and properties of pectin substances of wild sea buckthorn (Hippophae rhamnoides L.) growing in Azerbaijan

The use of sea buckthorn fruits in medicine, cosmetology and as a source of ingredients that improve the quality of food has already been studied and continues to be studied. One of these ingredients can serve as pectin substances of sea buckthorn, isolated from it in its pure form. Considering the relevance of this direction, the main task of this work was the study and identification of pectin substances isolated from the fruits of wild sea buckthorn growing in Azerbaijan. Using cavitation-membrane technology, samples of pectin substances from sea buckthorn pomace were obtained under optimal technological conditions, after which the physicochemical characteristics were studied and their identification was carried out using physicochemical methods - elementary analysis, IR and NMR spectroscopy. Data have been obtained indicating that sea buckthorn pectin is a low-esterified pectin, which consists of a mixture of linear and highly branched polymers of α-D-galacturonane and other polysaccharides, whose macromolecules include galacturonic acid residues and neutral sugars. The high complexing ability of the obtained pectin in relation to lead ions has been established, which makes it possible to recommend it as an active ingredient for therapeutic and prophylactic products. The data obtained allow us to get a more complete picture of the biotechnological potential of local sea buckthorn as a source of pectin substances.

Structural Adaptive, Self-Separating Material for Removing Ibuprofen from Waters and Sewage

β-Cyclodextrin nanosponge (β−CD−M) was used for the adsorption of ibuprofen (IBU) from water and sewage. The obtained material was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), Barrett–Joyner–Halenda (BJH), Harkins and Jura t-Plot, zeta potential, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and elementary analysis (EA). Batch adsorption experiments were employed to investigate the effects of the adsorbent dose, initial IBU concentration, contact time, electrolyte ions and humic acids, and sewage over adsorption efficiency. The experimental isotherms were show off using Langmuir, Freundlich, Hill, Halsey and Sips isotherm models and thermodynamic analysis. The fits of the results were estimated according to the Sips isotherm, with a maximum adsorption capacity of 86.21 mg g−1. The experimental kinetics were studied by pseudo-first-order, pseudo-second-order, Elovich, modified Freundlich, Weber Morris, Bangham’s pore diffusion, and liquid film diffusion models. The performed experiments revealed that the adsorption process fits perfectly to the pseudo-second-order model. The Elovich and Freundlich models indicate chemisorption, and the kinetic adsorption model itself is complex. The data obtained throughout the study prove that this nanosponge (NS) is extremely stable, self-separating, and adjusting to the guest structure. It also represents a potential biodegradable adsorbent for the removal IBU from wastewaters.

Copolymer Involving 2-Hydroxyethyl Methacrylate and 2-Chloroquinyl Methacrylate: Synthesis, Characterization and In Vitro 2-Hydroxychloroquine Delivery Application

The Poly(2-chloroquinyl methacrylate-co-2-hydroxyethyl methacrylate) (CQMA-co-HEMA) drug carrier system was prepared with different compositions through a free-radical copolymerization route involving 2-chloroquinyl methacrylate (CQMA) and 2-hydroxyethyl methacrylate) (HEMA) using azobisisobutyronitrile as the initiator. 2-Chloroquinyl methacrylate monomer (CQMA) was synthesized from 2-hydroxychloroquine (HCQ) and methacryloyl chloride by an esterification reaction using triethylenetetramine as the catalyst. The structure of the CQMA and CQMA-co-HEMA copolymers was confirmed by a CHN elementary analysis, Fourier transform infra-red (FTIR) and nuclear magnetic resonance (NMR) analysis. The absence of residual aggregates of HCQ or HCQMA particles in the copolymers prepared was confirmed by a differential scanning calorimeter (DSC) and XR-diffraction (XRD) analyses. The gingival epithelial cancer cell line (Ca9-22) toxicity examined by a lactate dehydrogenase (LDH) assay revealed that the grafting of HCQ onto PHEMA slightly affected (4.2–9.5%) the viability of the polymer carrier. The cell adhesion and growth on the CQMA-co-HEMA drug carrier specimens carried out by the (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assay revealed the best performance with the specimen containing 3.96 wt% HCQ. The diffusion of HCQ through the polymer matrix obeyed the Fickian model. The solubility of HCQ in different media was improved, in which more than 5.22 times of the solubility of HCQ powder in water was obtained. According to Belzer, the in vitro HCQ dynamic release revealed the best performance with the drug carrier system containing 4.70 wt% CQMA.

Degradative Studies in the Picrotoxinin Series

<p>PICROTOXIN is a bitter principle of the berries of the species Mensiperum coculus and Anamirata coculus, creepers which are indigenous to the East Indies. It was first isolated in 1812, and subsequent elementary analysis showed that it contained only carbon, hydrogen, and oxygen. Because of its potent poisonous nature and its physiological action, together with its high oxygen content, picrotoxin has often been referred to as an “oxygen alkaloid”. It is a central nervous system stimulant and a powerful convulsant drug. It is used in medicine as an antidote to barbiturate poisoning, being still preferred for this purpose over many other drugs. It has also been used in cases of alcoholic intoxication, and as a fish poison.</p>

Degradative Studies in the Picrotoxinin Series

<p>PICROTOXIN is a bitter principle of the berries of the species Mensiperum coculus and Anamirata coculus, creepers which are indigenous to the East Indies. It was first isolated in 1812, and subsequent elementary analysis showed that it contained only carbon, hydrogen, and oxygen. Because of its potent poisonous nature and its physiological action, together with its high oxygen content, picrotoxin has often been referred to as an “oxygen alkaloid”. It is a central nervous system stimulant and a powerful convulsant drug. It is used in medicine as an antidote to barbiturate poisoning, being still preferred for this purpose over many other drugs. It has also been used in cases of alcoholic intoxication, and as a fish poison.</p>

Luminescence and Electrochemical Activity of New Unsymmetrical 3-Imino-1,8-naphthalimide Derivatives

A new series of 1,8-naphtalimides containing an imine bond at the 3-position of the naphthalene ring was synthesized using 1H, 13C NMR, FTIR, and elementary analysis. The impact of the substituent in the imine linkage on the selected properties and bioimaging of the synthesized compounds was studied. They showed a melting temperature in the range of 120–164 °C and underwent thermal decomposition above 280 °C. Based on cyclic and differential pulse voltammetry, the electrochemical behavior of 1,8-naphtalimide derivatives was evaluated. The electrochemical reduction and oxidation processes were observed. The compounds were characterized by a low energy band gap (below 2.60 eV). Their photoluminescence activities were investigated in solution considering the solvent effect, in the aggregated and thin film, and a mixture of poly(N-vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt.%). They demonstrated low emissions due to photoinduced electron transport (PET) occurring in the solution and aggregation, which caused photoluminescence quenching. Some of them exhibited light emission as thin films. They emitted light in the range of 495 to 535 nm, with photoluminescence quantum yield at 4%. Despite the significant overlapping of its absorption range with emission of the PVK:PBD, incomplete Förster energy transfer from the matrix to the luminophore was found. Moreover, its luminescence ability induced by external voltage was tested in the diode with guest–host configuration. The possibility of compound hydrolysis due to the presence of the imine bond was also discussed, which could be of importance in biological studies that evaluate 3-imino-1,8-naphatalimides as imaging tools and fluorescent materials for diagnostic applications and molecular bioimaging.

Elementary analysis in banana samples using X-Ray Fluorescence

This work aims to characterize the elemental concentrations of two banana types gold and silver. In both were analyze in the pulp and peel by X-Ray Fluorescence technique. The results showed that the elements in both types are more concentrated in the peel than in the pulp. In addition, it was also observed that the normalization of the peel and pulp concentrations for the elements K, Fe, Zn, Br, Rb, and Sr is higher in the silver banana compared to the gold banana. The results indicate that banana peels can be used to supplement nutritional deficiencies. The work also demonstrates the potential that X-Ray Fluorescence has in investigation of elemental composition of foods. As the technique has easy instrumentation and data interpretation, it can be implemented as a routine in the investigation of the elemental composition of foods. In addition, the technique has the advantage of carrying out in situ analyzes by portable instruments. These in situ investigations can even be applied to make quality control of bananas at the time of harvest.