Thermal maturation of organic matter in the Middle Devonian to Tertiary section, Fort Norman area (central Mackenzie Plain)

1991 ◽  
Vol 28 (7) ◽  
pp. 1009-1018 ◽  
Author(s):  
S. Feinstein ◽  
G. K. Williams ◽  
L. R. Snowdon ◽  
F. Goodarzi ◽  
T. Gentzis

The Fort Norman area is marked by a complex structural and depositional history with temporally and spatially variable temperature and maturity gradients. Maturity of the Middle Devonian Canol – Hare Indian unit indicates two terrains of markedly different paleotemperatures and thermal gradients, roughly coinciding with the Palaeozoic Keele Arch (north) and Root Basin (south), with a sharp transition (lateral discontinuity) between them. Maturity of the unconformably overlying Cretaceous to early tertiary section is lower and laterally continuous across the entire study area, showing no relation to the sub-Cretaceous structures. The vertical maturity profile in the southern terrain is unique in that two discontinuous segments record markedly different thermal histories, neither of which is related to present burial conditions. Maturity of the Devonian formations was established some time prior to the sub-Cretaceous erosion, whereas that in the Cretaceous to Tertiary section postdates Palaeocene but predates a major part of the later Tertiary deformation and erosion. In contrast, the continuous maturity profile recorded in the northern terrain reflects a significant effect of the Tertiary thermal conditions, indicating much lower thermal gradients in the Keele Arch than in the Root Basin during the early phase of maturation. Along with the structural pattern and sedimentary history, the striking differences indicated in the thermal gradients between the Root Basin and the Keele Arch suggest a strike-slip-related pull-apart or another stretching mechanism for the Root Basin in contrast to the compression in the Keele Arch. In addition to the characterization of the regional thermal history and its variation with time, the maturity pattern obtained allows some estimate to be made of the thickness of the eroded section and timing of the major erosional phases.

2012 ◽  
Vol 4 (3) ◽  
Author(s):  
Evangelos Kamberis ◽  
George Bathrellos ◽  
Eleni Kokinou ◽  
Hariklia Skilodimou

AbstractIn the context of the present study the structural pattern in the Western Thessaly Basin (Greece) has been examined, based on structural data collected from the entire study area that were further correlated to the hydrographic network. The structural pattern of the area was revealed from tectonic analysis. Additionally, the topography, stratigraphy and sedimentology of the study area were taken into account. GIS techniques were used to map the spatial distribution of the geological and tectonic features on the topographic relief of the area.The oldest structures are contractional in nature, deformed by normal faulting related to the extensional episodes initiated in Serravallian times. It is inferred that the orientation of the stress field in the area has changed several times: the N-S stress field which was dominant during Late Serravallian times changed to NW-SE (Messinian-Zanclian) up to E-W in Zanclian and subsequently to roughly NNW-SSE (in late Piacencian). The NE-SW stress that was dominant in Pleistocene became N-S in later times. In addition, some changes in orientation are also indicated for the transitional periods of the pre-mentioned extensional episodes, possibly related to local events, or as a block-related deformation. The development of the 7th order streams is probably related to the N-S extensional faulting initiated in Pliocene times, while the dominant direction of the 6th, 5th and 4th order streams is possibly connected with the presence of the NNE-SSW and NW-SE extensional faults. Finally, the lower order streams are probably related to the most recent E-W striking normal faults.


2020 ◽  
pp. 75-86
Author(s):  
Sergio Antonio Camargo ◽  
Lauro Correa Romeiro ◽  
Carlos Alberto Mendes Moraes

The present article aimed to test changes in cooling water temperatures of males, present in aluminum injection molds, to reduce failures due to thermal fatigue. In order to carry out this work, cooling systems were studied, including their geometries, thermal gradients and the expected theoretical durability in relation to fatigue failure. The cooling system tests were developed with the aid of simulations in the ANSYS software and with fatigue calculations, using the method of Goodman. The study of the cooling system included its geometries, flow and temperature of this fluid. The results pointed to a significant increase in fatigue life of the mold component for the thermal conditions that were proposed, with a significant increase in the number of cycles, to happen failures due to thermal fatigue.


2003 ◽  
Vol 154 (8) ◽  
pp. 305-313 ◽  
Author(s):  
Roman Eyholzer ◽  
Martin Baumann ◽  
Rolf Manser

Faced with the challenging task of balancing forest interests and wildlife, the Swiss Forest Agency initiated the pilot programme«Game and Forest», which is committed to a philosophy of goal-oriented management practice and a redesign of forestry subsidizing. Within this programme the diverse goals of forestry and hunting have been amalgamated to a superimposed goal and set out in a corresponding contract. The Game-Forest-Management-Tool (GFMT) has been divised to simulate the effect of various strategies to deal with the complex problems of forest-wildlife. Optimal contract-fulfilling procedures can be simulated on a PC using this technical tool. The efficiency of the measures suggested by simulations that were carried out are being tested in a study area within the pilot programme, «Game and Forest». Half way through this trial, after two years, we can say that there has been no significant increase of non-browsed areas. In 2004, after the collection of data for the entire study area, we will be able to tell whether applying this computer simulated strategy truly leads to an augmentation of non-browsed area and a decrease in bark-peeled forests in the pilot area.


2021 ◽  
Vol 13 (11) ◽  
pp. 2129
Author(s):  
Fei Zhao ◽  
Lu Song ◽  
Zhiyan Peng ◽  
Jianqin Yang ◽  
Guize Luan ◽  
...  

Using toponym data, population data, and night-time light data, we visualized the development index of the Yi, Wa, Zhuang, Naxi, Hani, and Dai ethnic groups on ArcGIS as well as the distribution of 25 ethnic minorities in the study area. First, we extracted the toponym data of 25 ethnic minorities in the study area, combined with night-time light data and the population proportion data of each ethnic group, then we obtained the development index of each ethnic group in the study area. We compared the development indexes of the Yi, Wa, Zhuang, Naxi, Hani, and Dai ethnic groups with higher development indexes. The results show that the Yi nationality’s development index was the highest, reaching 28.86 (with two decimal places), and the Dai nationality’s development index was the lowest (15.22). The areas with the highest minority development index were concentrated in the core area of the minority development, and the size varied with the minority’s distance. According to the distribution of ethnic minorities, we found that the Yi ethnic group was distributed in almost the entire study area, while other ethnic minorities had obvious geographical distribution characteristics, and there were multiple ethnic minorities living together. This research is of great significance to the cultural protection of ethnic minorities, the development of ethnic minorities, and the remote sensing mapping of lights at night.


2021 ◽  
Vol 13 (1) ◽  
pp. 454-468
Author(s):  
Yumeng Song ◽  
Jing Zhang

Abstract We integrated hyperspectral and field-measured chlorophyll-a (Chl-a) data from the Kristalbad constructed wetland in the Netherlands. We developed a best-fit band ratio empirical algorithm to generate a distribution map of Chl-a concentration (C chla) from SPOT 6 imagery. The C chla retrieved from remote sensing was compared with a water quality model established for a wetland pond system. The retrieved satellite results were combined with a water quality model to simulate and predict the changes in phytoplankton levels. The regression model provides good retrievals for Chl-a. The imagery-derived C chla performed well in calibrating the simulation results. For each pond, the modeled C chla showed a range of values similar to the Chl-a data derived from SPOT 6 imagery (10–25 mg m−3). The imagery-derived and prediction model results could be used as the guiding analytical tools to provide information covering an entire study area and to inform policies.


2021 ◽  
Vol 7 (2) ◽  
pp. 44
Author(s):  
Francesca Picca ◽  
Angela Di Pietro ◽  
Mario Commodo ◽  
Patrizia Minutolo ◽  
Andrea D’Anna

In this study, flame-formed carbon nanoparticles of different nanostructures have been produced by changing the flame temperature. Raman spectroscopy has been used for the characterization of the carbon nanoparticles, while the particle size has been obtained by online measurements made by electrical mobility analysis. The results show that, in agreement with recent literature data, a large variety of carbon nanoparticles, with a different degree of graphitization, can be produced by changing the flame temperature. This methodology allows for the synthesis of very small carbon nanoparticles with a size of about 3-4 nm and with different graphitic orders. Under the perspective of the material synthesis process, the variable-temperature flame-synthesis of carbon nanoparticles appears as an attractive procedure for a cost-effective and easily scalable production of highly tunable carbon nanoparticles.


2014 ◽  
Vol 12 (40) ◽  
pp. 7932-7936 ◽  
Author(s):  
Benjamin M. Schulze ◽  
Davita L. Watkins ◽  
Jing Zhang ◽  
Ion Ghiviriga ◽  
Ronald K. Castellano

Reported is characterization of the self-assembly of π-conjugated oligomers, molecules studied recently in photovoltaic devices, using variable temperature diffusion ordered spectroscopy; the approach has allowed estimation of assembly size, shape, and molecularity.


Sign in / Sign up

Export Citation Format

Share Document