Le comportement électrochimique du magnésium en milieux légèrement alcalins

1980 ◽  
Vol 58 (1) ◽  
pp. 30-38 ◽  
Author(s):  
Robert-Louis Brossard ◽  
Dominique-Louis Piron
Keyword(s):  
Corrosion Product ◽  
Hydrogen Evolution Reaction ◽  
Electrode Potential ◽  
Oxidation Mechanism ◽  
Chloride Ions ◽  
Anodic Behavior ◽  
High Concentration ◽  
Oxidation Layer ◽  
Kinetics Of ◽  
Simulated Seawater

This study of the anodic behavior of magnesium in simulated seawater has shown that the corrosion product formed at the surface of the electrode depends mainly on the nature of ions dissolved in the electrolyte. Analyses of the corrosion product, formed in the presence of a high concentration of chloride ions, are compatible with the formation of a compound having approximately the formula 5Mg(OH)2•MgCl2. However, this complex is gradually transformed over a period of several hours into Mg(OH)2.A model of the oxidation mechanism is presented in which the characteristics of the anodic behavior of magnesium are related to the structure of the oxidation layer. For example, the activation of the surface of the anode, the kinetics of the hydrogen evolution reaction, and the large difference between values of corrected and uncorrected electrode potential can all be explained by this model. It is the resistance of the film to the flow of current which controls the kinetics of anodic dissolution of magnesium.

The Static Electrode Potential Behavior Of Aluminum and the Anodic Behavior of the Pure Metal And Its Alloys in Chloride Media

CORROSION ◽  
1957 ◽  
Vol 13 (12) ◽  
pp. 27-32 ◽  
Author(s):  
E. M. KHAIRY ◽  
M. KAMAL HUSSEIN
Keyword(s):  
Double Layer ◽  
Electrode Surface ◽  
Electrode Potential ◽  
Pure Metal ◽  
Chloride Ions ◽  
Surface Oxide ◽  
Anodic Behavior ◽  
Buffer Solutions ◽  
Corrosive Effect

Abstract The electrode potential behavior of aluminum investigated in buffer solutions of pH 4-8 containing varying concentrations of chloride ions, shows that the electrode potential does not respond to variations of pH. It changes linearly with pCl yielding a more or less constant Eo′ value of —0.54 volt. The corroding effect of the chloride ions supposedly is restricted to the adsorption of these ions on the surface and the electrode behaves as one of the second type. The oscillograms obtained both with the pure metal and with its alloys indicate that the surface oxide resists the corrosive effect up to a 0.1-N [CI–]. At higher concentrations, the electrode surface is appreciably activated acquiring relatively high double layer capacities, prominent passivity being achieved only on passing appropriate amounts of electricity. 6.4.2

Effect of environmental factors on the atmospheric corrosion of mild steel in aggressive sea coastal environment

2000 ◽  
Vol 47 (4) ◽  
pp. 215-226 ◽  
Author(s):  
Zaki Ahmad ◽  
I.M. Allam ◽  
B.J. Abdul Aleem
Keyword(s):  
Corrosion Product ◽  
Environmental Protection Agency ◽  
Atmospheric Corrosion ◽  
Exposure Period ◽  
Chloride Ions ◽  
World Health ◽  
Eastern Coast ◽  
High Concentration ◽  
Initial Exposure ◽  
The World

The eastern coast of Saudi Arabia has one of the most corrosive environments in the world. Dhahran is therefore an ideal location for the study of atmospheric corrosion. One out of every seven cars in the region is corroded. The atmosphere is contaminated by SO2 and a high concentration of suspended particulate matter (SPM) containing sand, salt and carbon particles, exceeding the World Health Organization (WHO) and Middle East Environmental Protection Agency (MEPA) limits most of the time. Corrosion proceeds in the Dhahran atmosphere at a R.H. as low as 40 per cent. At locations close to the sea (1.5 Km), β‐FeOOH is the major corrosion product and α‐ and γ‐FeOOH with some aluminates, silicates and hydrocarbons the minor products. At a location remote from the sea α‐ and γ‐FeOOH are found to be the major corrosion products as shown by XRD and FTIR spectroscopy. The concentration of hydrogen ions, chloride ions and SO2 appears to control the corrosion process during the initial exposure period up to one year and the adsorption of anions on the corrosion product films in the later period.

Molecular Characterization of the Surface Excess Charge Layer in Droplets

2020 ◽  
Author(s):  
Victor Kwan ◽  
Styliani Consta
Keyword(s):  
Hydrogen Bonds ◽  
Surface Charge ◽  
Droplet Size ◽  
Chloride Ions ◽  
Total Charge ◽  
Excess Charge ◽  
Surface Excess ◽  
High Concentration ◽  
Dipole Orientation ◽  
Charge Layer

<div>Charged droplets play a central role in native mass spectrometry, atmospheric aerosols and in serving as micro-reactors for accelerating chemical reactions. The surface excess charge layer in droplets has often been associated with distinct chemistry. Using molecular simulations for droplets with Na+ and Cl- ions we have found that this layer is ≈ 1.5−1.7 nm thick and depending on the droplet size it includes 33%-55% of the total number of ions. Here, we examine the effect of droplet size and nature of ions in the structure of the surface excess charge layer by using molecular dynamics. We find that in the presence of simple ions the thickness of the surface excess charge layer is invariant not only with respect to droplet size but also with respect to the nature of the simple ions and it is not sensitive to fine details of different force fields used in our simulations.</div><div> In the presence of macroions the excess surface charge layer may extend to 2.0. nm. For the same droplet size, iodide and model hydronium ions show considerably higher concentration than the sodium and chloride ions. <br></div><div>We also find that differences in the average water dipole orientation in the presence of cations and anions in this layer are reflected in the charge distributions. Within the surface charge layer, the number of hydrogen bonds reduces gradually relative to the droplet interior where the number of hydrogen bonds is on the average 2.9 for droplets of diameter < 4 nm and 3.5 for larger droplets. The decrease in the number of hydrogen bonds from the interior to the surface is less pronounced in larger droplets. In droplets with diameter < 4 nm and high concentration of ions the charge of the ions is not compensated only by the solvent polarization charge but by the total charge that also includes the other free charge. This finding shows exceptions to the commonly made assumption that the solvent compensates the charge of the ions in solvents with very high dielectric constant. The study provides molecular insight into the bi-layer droplet structure assumed in the equilibrium partitioning model of C. Enke and assesses critical assumptions of the Iribarne-Thomson model for the ion-evaporation mechanism. <br></div>

Ground water quality of selected areas of Punjab and Sind Provinces, Pakistan: Chemical and microbiological aspects

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Ionic Concentration ◽  
Chloride Ions ◽  
Potassium Ions ◽  
Ammonium Ions ◽  
High Concentration ◽  
Phosphate Ions ◽  
Sodium Magnesium ◽  
Very High ◽  
Microbiological Aspects

The assessment of groundwater is essential for the estimation of suitability of water for safe use. An attempt has been made to study the groundwater of selected areas of Punjab (Sheikhupura &amp; Sahiwal) and Sindh (Sindh, Jawar Dharki and Dharki), Pakistan. The results indicate that pH, color and odor were all within limits of WHO that is pH ranges 6.5–8.5, colorless and odorless, respectively. The high values of suspended solids were observed in the Sindh-1 and Dharki samples. Microbiologically only Sahiwal and Jawar Dharki were found fit for drinking purpose. Trace metals analysis of Sheikhupura-1 and Sindh-1 showed that values do not fall within limits of WHO for Iron. The ionic concentration analysis showed that high bicarbonate (HCO3-), ions are present in the samples of Sahiwal and Dharki; Sindh-1 and Jawar Dharki samples showed very high concentration for chloride ions, all samples were satisfactory level for sulphate (SO42-), sodium, magnesium and phosphate ions except samples of Sindh-1 and Jawar Dharki. High concentration of calcium and potassium ions was observed in samples of Sindh-1, while all other samples were found fit for drinking purposes in respect of nitrate, nitrite and ammonium ions. The high concentration of Fluoride was found only in Sheikhupura-2 samples.

Vancomycin Adsorption During in vitro Model of Hemoperfusion with HA380 Cartridge

Nephron ◽  
2021 ◽  
pp. 1-7
Author(s):  
Ilaria Godi ◽  
Anna Lorenzin ◽  
Silvia De Rosa ◽  
Gianlorenzo Golino ◽  
Maira Knust ◽  
...  
Keyword(s):  
Complete Removal ◽  
Potential Interaction ◽  
Blood Purification ◽  
Therapeutic Monitoring ◽  
High Concentration ◽  
Langmuir Isotherm Model ◽  
Vitro Model ◽  
Kinetics Of ◽  
Balanced Solution

<b><i>Introduction:</i></b> A critical point for using blood purification during sepsis may be the potential interaction with antimicrobial therapy, the mainstay of sepsis treatment. The aim of our study was to investigate the vancomycin removal during hemoperfusion (HP) using HA380 cartridge. <b><i>Methods:</i></b> This is an experimental study, in which 500 mL of solution was circulated in a closed-circuit (blood flow of 250 mL/min) simulating HP ran using HA380. Vancomycin was added to reach a through concentration or a very high concentration to evaluate the removal ratio (RR) during 120 min of HP. Comparison between blood-crystalloid solution and balanced solution was performed by using Kruskal-Wallis test. The kinetics of vancomycin removal and the adsorption isotherm were evaluated. <b><i>Results:</i></b> We found a complete removal of vancomycin at baseline through concentration of 23.0 ± 7.4 mg/L. Using extremely high concentration (baseline 777.0 ± 62.2 mg/L), RR was 90.1 ± 0.6% at 5 min and 99.2 ± 0.6% at 120 min. No difference in terms of RR was found between blood-crystalloid mixture and balanced solution. The kinetics of the vancomycin reduction followed an exponential decay. Repeated boluses (total amount of 2,000 mg) resulted in cumulative adsorption of 1,919.4 mg with RR of 96.6 ± 1.4%, regardless of the amount injected (100 vs. 500 mg). Vancomycin adsorption onto HA380 followed the Langmuir isotherm model. <b><i>Conclusions:</i></b> A considerable amount of vancomycin was rapidly removed during in vitro HP with HA380. Clinical studies are needed to determine whether this may lead to underdosing. Drug therapeutic monitoring is highly recommended when using HA380 for blood purification in patients receiving vancomycin.

scholarly journals Leaching Titaniferous Magnetite Concentrate by Alkaline Aqueous Solution

2021 ◽  
Author(s):  
Ke Guo ◽  
Shaoyan Wang ◽  
Renfeng Song ◽  
Zhiqiang Zhang
Keyword(s):  
Aqueous Solution ◽  
Alkali Concentration ◽  
Water Usage ◽  
X Ray Diffraction ◽  
High Concentration ◽  
X Ray ◽  
Iron Concentrate ◽  
Titaniferous Magnetite ◽  
Magnetite Concentrate ◽  
Kinetics Of

AbstractLeaching titaniferous magnetite concentrate with alkali solution of high concentration under high temperature and high pressure was utilized to improve the grade of iron in iron concentrate and the grade of TiO2 in titanium tailings. The titaniferous magnetite concentrate in use contained 12.67% TiO2 and 54.01% Fe. The thermodynamics of the possible reactions and the kinetics of leaching process were analyzed. It was found that decomposing FeTiO3 with NaOH aqueous solution could be carried out spontaneously and the reaction rate was mainly controlled by internal diffusion. The effects of water usage, alkali concentration, reaction time, and temperature on the leaching procedure were inspected, and the products were characterized by X-ray diffraction, scanning electron microscope, and energy dispersive spectroscopy, respectively. After NaOH leaching and magnetic separation, the concentrate, with Fe purity of 65.98% and Fe recovery of 82.46%, and the tailings, with TiO2 purity of 32.09% and TiO2 recovery of 80.79%, were obtained, respectively.

Sign in / Sign up

Export Citation Format

Share Document