Flexural Strength, Elastic Modulus and Remineralizing Abilities of Bioactive Resin-Based Dental Sealants

Objective: To assess the remineralizing abilities and compare the flexural strength and elastic modulus of different bioactive pit and fissure sealants. Materials and Methods: Human enamel samples were randomly and blindly sealed with one of the following bioactive materials: BioCoat (Bc), ACTIVA KIDS (Av) and BeautiSealant (Bu). Seal-it (Si) was used as a non-bioactive sealant beside a control blank (B) group with no sealant. The sealed samples were subjected to a pH-cycling model (7 days of demineralization–remineralization cycles). The enamel surface hardness change (SHC), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX) and polarized light microscopy were used to assess the remineralizing abilities of the studied sealants. Flexural strength and elastic modulus were also assessed following the ISO 4049 protocols. One-way analysis of variance (ANOVA) was used to analyze the results. Results: Bc sealant showed the highest FS and EM (p < 0.05). The contact with Bc and Bu sealants showed significantly lower %SHL (p < 0.05) in comparison to the other. These findings were supported by the results of SEM-EDX and polarized imaging by showing higher percentages of calcium and phosphate ions with the former sealants and thinner demineralized enamel bands. Conclusion: In this study, Bc showed the highest flexural strength. Bc and Bu sealants outperformed the other studied sealants in terms of their remineralization abilities.

Genome-wide identification and characterization of SPX-domain-containing protein gene family in Solanum lycopersicum

The SYG1, PHO81, and XPR1 (SPX) domain is named after the suppressor of yeast gpa1 (Syg1), yeast phosphatase (Pho81) and the human Xenotropic and Polytrophic Retrovirus receptor1 (XPR1). SPX-domain-containing proteins play pivotal roles in maintaining phosphate ions (Pi) homeostasis in plant. This study was to genome-wide identification and analysis of Solanum lycopersicum SPX-domain-containing protein gene family. The Solanum lycopersicum genome contains 19 SPX-domain-containing protein genes. These SPX-domain-containing protein genes were located in seven of the 12 chromosomes. According to the different conserved domains, the proteins encoded by those genes could be divided into four SPX-domain-containing protein families, which included SPX Family, SPX-ERD1/XPR1/SYG1(SPX-EXS) Family, SPX-Major Facilitator Superfamily (SPX-MFS) Family and SPX-Really Interesting New Gene (SPX-RING) Family. Phylogenetic analysis of SPX-domain-containing protein genes in Arabidopsis thaliana, Solanum tuberosum, Capsicum annuum and Solanum lycopersicum classified these genes into eight clades. Expression profiles derived from transcriptome (RNA-seq) data analysis showed 19 SPX-domain-containing protein genes displayed various expression patterns. SPX-domain-containing protein may play different roles in phosphate nutrition of Solanum lycopersicum different tissues and development stages. And, this study can provide the selection of candidate genes for functional research and genome editing in Solanum lycopersicum phosphate ions (Pi) nutrition.

In Situ Pinpoint Photopolymerization of Phos-Tag Polyacrylamide Gel in Poly(dimethylsiloxane)/Glass Microchip for Specific Entrapment, Derivatization, and Separation of Phosphorylated Compounds

An improved method for the online preconcentration, derivatization, and separation of phosphorylated compounds was developed based on the affinity of a Phos-tag acrylamide gel formed at the intersection of a polydimethylsiloxane/glass multichannel microfluidic chip toward these compounds. The acrylamide solution comprised Phos-tag acrylamide, acrylamide, and N,N-methylene-bis-acrylamide, while 2,2′-azobis[2-methyl-N-(2-hydroxyethyl)propionamide] was used as a photocatalytic initiator. The Phos-tag acrylamide gel was formed around the channel crossing point via irradiation with a 365 nm LED laser. The phosphorylated peptides were specifically concentrated in the Phos-tag acrylamide gel by applying a voltage across the gel plug. After entrapment of the phosphorylated compounds in the Phos-tag acrylamide gel, 5-(4,6-dichlorotriazinyl)aminofluorescein (DTAF) was introduced to the gel for online derivatization of the concentrated phosphorylated compounds. The online derivatized DTAF-labeled phosphorylated compounds were eluted by delivering a complex of phosphate ions and ethylenediamine tetraacetic acid as the separation buffer. This method enabled sensitive analysis of the phosphorylated peptides.

Effect of Gamma Radiation on the Adsorption Capacity and Regeneration / Desorption of Sulphate and Phosphate Ions Using Smart Hydrogel.

Co-polymeric hydrogels containing poly (Acrylamide /Epichlorohydrine) P(AAm/EPI) with different acrylamide and Epichlorohydrine content were fabricated by gamma radiation at different irradiation doses as adsorbent materials for wastewater treatment. The mechanisms of radiation-induced crosslinking of hydrogel in aqueous solution has been evaluated. The gel contents and the swelling/diffusion kinetic parameters were evaluated at different irradiation doses, and the result confirm a non-fichian mechanism. The shape, surface morphology, and porosity of P (AAm/ Epi) hydrogel were characterized by scanning electron microscope (SEM). Adsorption experiments were carried out for the removal of sulphate and phosphate ions from wastewater using P(AAm/EPI) hydrogels as adsorbent materials. The isotherm data were analyzed by Freundlich equation. The equilibrium isotherm results show a better fitting (R2 > 0.9) to the Freundlich model for all anions. The calculated regeneration efficiency (%) values of sulphate and phosphate ions found to be ranged between 63.2 (%) and 46 (%).The relatively higher regeneration efficiency (%) and keeping the hydrogels its shape without any deformation promising to use the same hydrogels further times which decrease the economic cost.

The study of phosphate ions sorption from silicon dioxide solutions obtained by using acid decomposition of nepheline

The process of sorption of phosphate ion by silicon dioxide obtained by acid decomposition of nepheline is studied. The experimental data were processed using the Freundlich and Langmuir sorption equations, which showed that the sorption process is fairly accurately described by both equations, while the use of the Langmuir monomolecular adsorption equation is preferable in the calculations. The capacity of the adsorption monolayer of the synthesized sample relative to the РО43–-ion and the adsorption equilibrium constant are calculated. Based on the obtained data, various options for sorption treatment of municipal wastewater from РО43--ion to normalized MPC values were evaluated.

Adsorption of phosphate ions from aqueous solutions by layered magnesium and aluminum double hydroxide obtained by solid-phase synthesis

A layered double hydroxide of magnesium and aluminum was obtained by solid-phase synthesis.It was found that it has a predominantly mesoporous structure with cylindrical and wedge-shaped pores, as well as a specific surface area of 50 m2/g. The process of phosphate ion sorption by a synthesized sample is studied. Processing of experimental data on the Freundlich and Langmuir sorption equations showed that the process is described fairly accurately by the Langmuir monomolecular adsorption equation. The capacity of the adsorption monolayer of the synthesized sample with respect to the РО43--ion and the adsorption equilibrium constant are calculated.

Copper Chloro-Complexes Concentrated Solutions: An Electrochemical Study

Basic studies on concentrated solutions are becoming more and more important due to the practical industrial and geological applications. The use in redox flow batteries is one of the most important applications of these solutions. Specifically, in this paper we investigated high-concentrated copper chloro-complexes solutions with different additives. The concentration of ligands and additives affects the physicochemical and electrochemical properties of 2 M solutions of Cu(I) and Cu(II). Solutions with calcium chloride and HCl as Cl− source were investigated with Cu:Cl ratios of 1:5 and 1:7, the 1:5 Cu:Cl ratio being the best performing. The substitution of calcium chloride with ammonium chloride increased the conductivity. However, while the effect on the positive electrode process was not very evident, the reversibility of the copper deposition–stripping process was greatly improved. Orthophosphoric acid could be a viable additive to decrease the complexation of calcium with chloride anions and to improve the stability of Cu(II) chloro-complexes. Absorption spectroscopy demonstrated that phosphate ions do not coordinate copper(II) but lead to a shift in the distribution of copper chloro-complexes toward more coordinated species. Electrochemically, the increased availability of chloride anions in solution stabilized the Cu(II)-rich solution and led to increased reversibility of the Cu(II)/Cu(I) redox process.