Observation of a radical intermediate in the one electron oxidation of 5-methyl-1-thia-5-azacyclooctane by •Br2−

1984 ◽  
Vol 62 (9) ◽  
pp. 1874-1876 ◽  
Author(s):  
Warren Kenneth Musker ◽  
Parminder S. Surdhar ◽  
Rizwan Ahmad ◽  
David A. Armstrong
Keyword(s):  
Aqueous Solution ◽  
Rate Constant ◽  
Half Life ◽  
Cation Radical ◽  
Order Rate Constant ◽  
Type Structure ◽  
Radical Intermediate ◽  
Text Type ◽  
First Order ◽  
The One

The one electron oxidant •Br2− reacts with 5-methyl-1-thia-5-azacyclooctane (4) in aqueous solution at high pH with an overall rate constant of ~2 × 108 M s−1. The radical intermediate produced has a broad maximum at 500 nm with ε = 2400 M−1 cm−1 and at pH 10 decays with a first order rate constant of 2.3 ± 0.3 × 104 s−1, first half-life of 30 ± 5 μs. Its characteristics do not correspond to those of the [Formula: see text] species reported by Asmus and co-workers. The species appears to be the same as the cation radical reported earlier in the one electron oxidation of 4 in acetonitrile. This species is considered to have an [Formula: see text] type structure, which provides transannular stabilization.

THE DECOMPOSITION OF SILYL PEROXIDES

1964 ◽  
Vol 42 (5) ◽  
pp. 985-989 ◽  
Author(s):  
Richard R. Hiatt
Keyword(s):  
Thermal Decomposition ◽  
Rate Constant ◽  
Half Life ◽  
Order Rate Constant ◽  
Butyl Alcohol ◽  
Base Catalysis ◽  
First Order ◽  
Tert Butyl ◽  
Tert Butyl Alcohol ◽  
Acid And Base

The thermal decomposition of tert-butyl trimethylsilyl peroxide has been investigated and found to be sensitive to acid and base catalysis and to the nature of the solvent. In heptane and iso-octane the first-order rate constant could be expressed as 1.09 × 1015e−41200/RT and in 1-octene as 3.90 × 1015e−41200/RT (sec−1). The half life at 203 °C was about 1 hour. The reaction was faster in aromatic solvents; in chlorobenzene it was complicated by formation of HCl from the solvent.Products of the reaction were acetone, tert-butyl alcohol and hexamethyldisiloxane.

scholarly journals Kinetic Study on Removal of Sulphur Mustard on Granular Activated Carbon from Aqueous Solution

2016 ◽  
Vol 1 (2) ◽  
pp. 167 ◽  
Author(s):  
Anuradha Baghel ◽  
Beer Singh
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Rate Constant ◽  
Half Life ◽  
Chemical Warfare Agent ◽  
Sulphur Mustard ◽  
Adsorptive Removal ◽  
First Order ◽  
First Order Kinetics ◽  
Pseudo First Order

Sulphur mustard is a powerful blister agent and has been worked as a chemical warfare agent. No specific antidote is available for its wound. Therefore, adsorptive removal is an effective way of removal. Here, adsorptive removal of sulphur mustard from aqueous solution was studied on activated carbon and screened out MeOH : H2O (1 : 1) solution as a good solvent than others used solvent. Adsorption isotherm of sulphur mustard was compared with its hydrolysis in the same solution. Kinetics of sulphur mustard removal on carbon from aqueous solution was found to be slower than hydrolysis and follow pseudo first order kinetics with the rate constant 5.04 X 10–3 min-1 and half life 137.5 min. The hydrolysis of sulphur mustard in MeOH : H2O (1 : 1) solution was found to be following the pseudo first order kinetics with the rate constant 8.68 x10-3 min-1 and half life 79.8 min.

Development of Sustained Release Multi-Component Microparticulate System of Diclofenac Sodium and Tizanidine Hydrochloride

1970 ◽  
Vol 1 (1) ◽  
pp. 97-105
Author(s):  
Kamlesh Dashora ◽  
Shailendra Saraf ◽  
Swarnalata Saraf
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
Cellulose Acetate ◽  
Rate Constant ◽  
Diclofenac Sodium ◽  
Order Rate Constant ◽  
Anomalous Transport ◽  
First Order ◽  
Sem Study ◽  
Transport Type

Sustained released tablets of diclofenac sodium (DIC) and tizanidine hydrochloride (TIZ) were prepared by using different proportions of cellulose acetate (CA) as the retardant material. Nine formulations of tablets having different proportion of microparticles developed by varied proportions of polymer: drug ratio ‘’i.e.’’; 1:9 -1:3 for DIC and 1:1 – 3:1 for TIZ. Each tablet contained equivalent to 100 mg of DIC and 6mg of TIZ. The prepared microparticles were white, free flowing and spherical in shape (SEM study), with  the particle size varying from 78.8±1.94 to 103.33±1.28 µm and 175.92± 9.82 to 194.94±14.28µm for DIC  and TIZ, respectively.  The first order rate constant K1 of formulations were found to be in the range of  K1 = 0.117-0.272 and 0.083- 0.189 %hr-1for DIC and TIZ, respectively. The value of exponent coefficient (n) was found to be in the range of 0.6328-0.9412  and 0.8589-1.1954 for DIC and TIZ respectively indicates anomalous  to  non anomalous transport type of diffusions among different formulations

Oxidation of Nickel(II) and Manganese(II) by Peroxodisulfate in Aqueous Solution in the Presence of Molybdate. Crystal Structure of the (NH4)6[NiMo9O32].6H2O Product

1992 ◽  
Vol 45 (12) ◽  
pp. 1943 ◽  
Author(s):  
SJ Dunne ◽  
RC Burns ◽  
GA Lawrance
Keyword(s):  
Rate Constant ◽  
Linear Dependence ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Oxidant Concentration ◽  
Ph Range ◽  
Kinetics Of

Oxidation of Ni2+,aq, by S2O82- to nickel(IV) in the presence of molybdate ion, as in the analogous manganese system, involves the formation of the soluble heteropolymolybdate anion [MMogO32]2- (M = Ni, Mn ). The nickel(IV) product crystallized as (NH4)6 [NiMogO32].6H2O from the reaction mixture in the rhombohedra1 space group R3, a 15.922(1), c 12.406(1) � ; the structure was determined by X-ray diffraction methods, and refined to a residual of 0.025 for 1741 independent 'observed' reflections. The kinetics of the oxidation were examined at 80 C over the pH range 3.0-5.2; a linear dependence on [S2O82-] and a non-linear dependence on l/[H+] were observed. The influence of variation of the Ni/Mo ratio between 1:10 and 1:25 on the observed rate constant was very small at pH 4.5, a result supporting the view that the precursor exists as the known [NiMo6O24H6]4- or a close analogue in solution. The pH dependence of the observed rate constant at a fixed oxidant concentration (0.025 mol dm-3) fits dequately to the expression kobs = kH [H+]/(Ka+[H+]) where kH = 0.0013 dm3 mol-1 s-1 and Ka = 4-0x10-5. The first-order dependence on peroxodisulfate subsequently yields a second-order rate constant of 0.042 dm3 mol-1 s-1. Under analogous conditions, oxidation of manganese(II) occurs eightfold more slowly than oxidation of nickel(II), whereas oxidation of manganese(II) by peroxomonosulfuric acid is 16-fold faster than oxidation by peroxodisulfate under similar conditions.

scholarly journals EFFECT OF DIATOMEAOUS EARTH TREATMENT USING HYDROGEN CHLORIDE AND SULFURIC ACID ON KINETICS OF CADMIUM(II) ADSORPTION

2010 ◽  
Vol 2 (2) ◽  
pp. 107-112
Author(s):  
Nuryono Nuryono ◽  
Narsito Narsito
Keyword(s):  
Aqueous Solution ◽  
Sulfuric Acid ◽  
Hydrogen Chloride ◽  
Rate Constant ◽  
Diatomaceous Earth ◽  
Adsorption Rate ◽  
Physical Interaction ◽  
First Order ◽  
Adsorption Rate Constant ◽  
Kinetics Of

In this research, treatment of diatomaceous earth, Sangiran, Central Java using hydrogen chloride (HCl) and sulfuric acid (H2SO4) on kinetics of Cd(II) adsorption in aqueous solution has been carried out. The work was conducted by mixing an amount of grounded diatomaceous earth (200 mesh in size) with HCl or H2SO4 solution in various concentrations for two hours at temperature range of 100 - 150oC. The mixture was then filtered and washed with water until the filtrate pH is approximately 7 and then the residue was dried for four hours at a temperature of 70oC. The product was used as an adsorbent to adsorb Cd(II) in aqueous solution with various concentrations. The Cd(II) adsorbed was determined by analyzing the rest of Cd(II) in the solution using atomic absorption spectrophotometry. The effect of treatment was evaluated from kinetic parameter of adsorption rate constant calculated based on the simple kinetic model. Results showed  that before equilibrium condition reached, adsorpstion of Cd(II) occurred through two steps, i.e. a step tends to follow a reaction of irreversible first order  (step I) followed by reaction of reversible first order (step II). Treatment with acids, either hydrogen chloride or sulfuric acid, decreased adsorption rate constant for the step I from 15.2/min to a range of 6.4 - 9.4/min.  However, increasing concentration of acid (in a range of concentration investigated) did not give significant and constant change of adsorption rate constant. For step II process,  adsorption involved physical interaction with the sufficient low adsorption energy (in a range of 311.3 - 1001 J/mol).     Keywords: adsorption, cdmium, diatomaceous earth, kinetics.

scholarly journals Population Pharmacokinetic Model and Meta-analysis of Outcomes of Amphotericin B Deoxycholate Use in Adults with Cryptococcal Meningitis

2018 ◽  
Vol 62 (7) ◽  
Author(s):  
Katharine E. Stott ◽  
Justin Beardsley ◽  
Sarah Whalley ◽  
Freddie Mukasa Kibengo ◽  
Nguyen Thi Hoang Mai ◽  
...  
Keyword(s):  
Amphotericin B ◽  
Rate Constant ◽  
Cryptococcal Meningitis ◽  
Drug Exposure ◽  
Meta Analysis ◽  
Central Compartment ◽  
Order Rate Constant ◽  
Peripheral Compartment ◽  
First Order ◽  
Amphotericin B Deoxycholate

ABSTRACT There is a limited understanding of the population pharmacokinetics (PK) and pharmacodynamics (PD) of amphotericin B deoxycholate (DAmB) for cryptococcal meningitis. A PK study was conducted in n = 42 patients receiving DAmB (1 mg/kg of body weight every 24 h [q24h]). A 2-compartment PK model was developed. Patient weight influenced clearance and volume in the final structural model. Monte Carlo simulations estimated drug exposure associated with various DAmB dosages. A search was conducted for trials reporting outcomes of treatment of cryptococcal meningitis patients with DAmB monotherapy, and a meta-analysis was performed. The PK parameter means (standard deviations) were as follows: clearance, 0.03 (0.01) × weight + 0.67 (0.01) liters/h; volume, 0.82 (0.80) × weight + 1.76 (1.29) liters; first-order rate constant from central compartment to peripheral compartment, 5.36 (6.67) h−1; first-order rate constant from peripheral compartment to central compartment, 9.92 (12.27) h−1. The meta-analysis suggested that the DAmB dosage explained most of the heterogeneity in cerebrospinal fluid (CSF) sterility outcomes but not in mortality outcomes. Simulations of values corresponding to the area under concentration-time curve from h 144 to h 168 (AUC144–168) resulted in median (interquartile range) values of 5.83 mg · h/liter (4.66 to 8.55), 10.16 mg · h/liter (8.07 to 14.55), and 14.51 mg · h/liter (11.48 to 20.42) with dosages of 0.4, 0.7, and 1.0 mg/kg q24h, respectively. DAmB PK is described adequately by a linear model that incorporates weight with clearance and volume. Interpatient PK variability is modest and unlikely to be responsible for variability in clinical outcomes. There is discordance between the impact that drug exposure has on CSF sterility and its impact on mortality outcomes, which may be due to cerebral pathology not reflected in CSF fungal burden, in addition to clinical variables.

The Dephosphorylation of Adenosine 5′ -Triphosphate in a Binary and Ternary Zn2+ Complex

1974 ◽  
Vol 29 (11-12) ◽  
pp. 680-682 ◽  
Author(s):  
Peter Amsler ◽  
David Buisson ◽  
Helmut Sigel
Keyword(s):  
Rate Constant ◽  
Ternary Complex ◽  
Order Rate Constant ◽  
Reactive Species ◽  
Ph Optimum ◽  
First Order ◽  
Order Rate

The dephosphorylation of ATP was characterized by determining the dependence of the first-order rate constant on pH in the absence and presence of Zn2+ and together with Zn2+ and 2,2′-bipyridyl. The Zn2+-accelerated reaction passes through a pH optimum at about 8. The decrease in the rate at higher pH is due to the formation of Zn(ATP) (OH)3-; this species is relatively insensitive towards dephosphorylation. It is concluded that Zn(ATP)2- is the reactive species and that the interaction between N (7) and Zn2+ in this complex is crucial for its reactivity. In the presence of 2,2′-bipyridyl (Bipy) the ternary complex, Zn (Bipy) (ATP)2-, is formed which is rather stable towards dephosphorylation. It is suggested that the described effects of acceleration and inhibition are helpful for understanding the recycled processes in nature.

Kinetics of reconstitution of apotyrosinase by copper

1990 ◽  
Vol 68 (2) ◽  
pp. 476-479
Author(s):  
Donald C. Wigfield ◽  
Douglas M. Goltz
Keyword(s):  
Rate Constant ◽  
Copper Concentration ◽  
Copper Ions ◽  
Copper Ion ◽  
Order Rate Constant ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Rate Limiting ◽  
Kinetics Of

The kinetics of the reconstitution reaction of apotyrosinase with copper (II) ions are reported. The reaction is pseudo first order with respect to apoenzyme and the values of these pseudo first order rate constants are reported as a function of copper (II) concentration. Two copper ions bind to apoenzyme, and if the second one is rate limiting, the kinetically relevant copper concentration is the copper originally added minus the amount used in binding the first copper ion to enzyme. This modified copper concentration is linearly related to the magnitude of the pseudo first order rate constant, up to a copper concentration of 1.25 × 10−4 M (10-fold excess), giving a second order rate constant of 7.67 × 102 ± 0.93 × 102 M−1∙s−1.Key words: apotyrosinase, copper, tyrosinase.

scholarly journals Acrolein, an irreversible active-site-directed inhibitor of deoxyribose 5-phosphate aldolase?

1976 ◽  
Vol 153 (2) ◽  
pp. 495-497 ◽  
Author(s):  
D C Wilton
Keyword(s):  
Schiff Base ◽  
Rate Constant ◽  
Active Site ◽  
Order Rate Constant ◽  
Lysine Residue ◽  
Prolonged Incubation ◽  
Enzyme Active Site ◽  
First Order ◽  
Substrate Analogue ◽  
Pseudo First Order

The enzyme deoxyribose 5-phosphate aldolase was irreversibly inactivated by the substrate analogue acrolein with a pseudo-first-order rate constant of 0.324 min-1 and a Ki (apparent) of 2.7 × 10(-4) m. No inactivation was observed after prolonged incubation with the epoxide analogues glycidol phosphate and glycidaldehyde. It is suggested that the acrolein is first activated by forming a Schiff base with the enzyme active-site lysine residue and it is the activated inhibitor that reacts with a suitable-active-site nucleophile.

An automated approach to characterize, in simple kinetic terms, the generation and inactivation of thrombin and the interaction of fibrinogen with thrombin.

1988 ◽  
Vol 34 (10) ◽  
pp. 1971-1975 ◽  
Author(s):  
D R Hoak ◽  
S K Banerjee ◽  
G Kaldor
Keyword(s):  
Prothrombin Time ◽  
Rate Constant ◽  
Thrombin Generation ◽  
Order Rate Constant ◽  
Clinical Use ◽  
First Order ◽  
Pathological Conditions ◽  
Pseudo First Order ◽  
Instantaneous Concentration

Abstract Here, we used a fully automated, computer-directed centrifugal analyzer (which permitted simultaneous turbidimetry and calculation of results) and purified thrombin, fibrinogen, and various inhibitors to study clot formation. The Km and Vm for these reactions were useful in detecting and partly characterizing anticoagulants. We also explored the generation and inactivation of thrombin, using the two-stage prothrombin time and antithrombin activity tests. The amount of thrombin instantaneously generated and inactivated was monitored under artificially created pathological conditions. The pseudo-first-order rate constant for thrombin generation and inactivation and the instantaneous concentration of enzymatically active and inactive thrombin were used in the characterization of these conditions. We believe this approach is suitable for routine clinical use.

Sign in / Sign up

Export Citation Format

Share Document