Development of Sustained Release Multi-Component Microparticulate System of Diclofenac Sodium and Tizanidine Hydrochloride

1970 ◽  
Vol 1 (1) ◽  
pp. 97-105
Author(s):  
Kamlesh Dashora ◽  
Shailendra Saraf ◽  
Swarnalata Saraf
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
Cellulose Acetate ◽  
Rate Constant ◽  
Diclofenac Sodium ◽  
Order Rate Constant ◽  
Anomalous Transport ◽  
First Order ◽  
Sem Study ◽  
Transport Type

Sustained released tablets of diclofenac sodium (DIC) and tizanidine hydrochloride (TIZ) were prepared by using different proportions of cellulose acetate (CA) as the retardant material. Nine formulations of tablets having different proportion of microparticles developed by varied proportions of polymer: drug ratio ‘’i.e.’’; 1:9 -1:3 for DIC and 1:1 – 3:1 for TIZ. Each tablet contained equivalent to 100 mg of DIC and 6mg of TIZ. The prepared microparticles were white, free flowing and spherical in shape (SEM study), with  the particle size varying from 78.8±1.94 to 103.33±1.28 µm and 175.92± 9.82 to 194.94±14.28µm for DIC  and TIZ, respectively.  The first order rate constant K1 of formulations were found to be in the range of  K1 = 0.117-0.272 and 0.083- 0.189 %hr-1for DIC and TIZ, respectively. The value of exponent coefficient (n) was found to be in the range of 0.6328-0.9412  and 0.8589-1.1954 for DIC and TIZ respectively indicates anomalous  to  non anomalous transport type of diffusions among different formulations

Oxidation of Nickel(II) and Manganese(II) by Peroxodisulfate in Aqueous Solution in the Presence of Molybdate. Crystal Structure of the (NH4)6[NiMo9O32].6H2O Product

1992 ◽  
Vol 45 (12) ◽  
pp. 1943 ◽  
Author(s):  
SJ Dunne ◽  
RC Burns ◽  
GA Lawrance
Keyword(s):  
Rate Constant ◽  
Linear Dependence ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Oxidant Concentration ◽  
Ph Range ◽  
Kinetics Of

Oxidation of Ni2+,aq, by S2O82- to nickel(IV) in the presence of molybdate ion, as in the analogous manganese system, involves the formation of the soluble heteropolymolybdate anion [MMogO32]2- (M = Ni, Mn ). The nickel(IV) product crystallized as (NH4)6 [NiMogO32].6H2O from the reaction mixture in the rhombohedra1 space group R3, a 15.922(1), c 12.406(1) � ; the structure was determined by X-ray diffraction methods, and refined to a residual of 0.025 for 1741 independent 'observed' reflections. The kinetics of the oxidation were examined at 80 C over the pH range 3.0-5.2; a linear dependence on [S2O82-] and a non-linear dependence on l/[H+] were observed. The influence of variation of the Ni/Mo ratio between 1:10 and 1:25 on the observed rate constant was very small at pH 4.5, a result supporting the view that the precursor exists as the known [NiMo6O24H6]4- or a close analogue in solution. The pH dependence of the observed rate constant at a fixed oxidant concentration (0.025 mol dm-3) fits dequately to the expression kobs = kH [H+]/(Ka+[H+]) where kH = 0.0013 dm3 mol-1 s-1 and Ka = 4-0x10-5. The first-order dependence on peroxodisulfate subsequently yields a second-order rate constant of 0.042 dm3 mol-1 s-1. Under analogous conditions, oxidation of manganese(II) occurs eightfold more slowly than oxidation of nickel(II), whereas oxidation of manganese(II) by peroxomonosulfuric acid is 16-fold faster than oxidation by peroxodisulfate under similar conditions.

Observation of a radical intermediate in the one electron oxidation of 5-methyl-1-thia-5-azacyclooctane by •Br2−

1984 ◽  
Vol 62 (9) ◽  
pp. 1874-1876 ◽  
Author(s):  
Warren Kenneth Musker ◽  
Parminder S. Surdhar ◽  
Rizwan Ahmad ◽  
David A. Armstrong
Keyword(s):  
Aqueous Solution ◽  
Rate Constant ◽  
Half Life ◽  
Cation Radical ◽  
Order Rate Constant ◽  
Type Structure ◽  
Radical Intermediate ◽  
Text Type ◽  
First Order ◽  
The One

The one electron oxidant •Br2− reacts with 5-methyl-1-thia-5-azacyclooctane (4) in aqueous solution at high pH with an overall rate constant of ~2 × 108 M s−1. The radical intermediate produced has a broad maximum at 500 nm with ε = 2400 M−1 cm−1 and at pH 10 decays with a first order rate constant of 2.3 ± 0.3 × 104 s−1, first half-life of 30 ± 5 μs. Its characteristics do not correspond to those of the [Formula: see text] species reported by Asmus and co-workers. The species appears to be the same as the cation radical reported earlier in the one electron oxidation of 4 in acetonitrile. This species is considered to have an [Formula: see text] type structure, which provides transannular stabilization.

scholarly journals Population Pharmacokinetic Model and Meta-analysis of Outcomes of Amphotericin B Deoxycholate Use in Adults with Cryptococcal Meningitis

2018 ◽  
Vol 62 (7) ◽  
Author(s):  
Katharine E. Stott ◽  
Justin Beardsley ◽  
Sarah Whalley ◽  
Freddie Mukasa Kibengo ◽  
Nguyen Thi Hoang Mai ◽  
...  
Keyword(s):  
Amphotericin B ◽  
Rate Constant ◽  
Cryptococcal Meningitis ◽  
Drug Exposure ◽  
Meta Analysis ◽  
Central Compartment ◽  
Order Rate Constant ◽  
Peripheral Compartment ◽  
First Order ◽  
Amphotericin B Deoxycholate

ABSTRACT There is a limited understanding of the population pharmacokinetics (PK) and pharmacodynamics (PD) of amphotericin B deoxycholate (DAmB) for cryptococcal meningitis. A PK study was conducted in n = 42 patients receiving DAmB (1 mg/kg of body weight every 24 h [q24h]). A 2-compartment PK model was developed. Patient weight influenced clearance and volume in the final structural model. Monte Carlo simulations estimated drug exposure associated with various DAmB dosages. A search was conducted for trials reporting outcomes of treatment of cryptococcal meningitis patients with DAmB monotherapy, and a meta-analysis was performed. The PK parameter means (standard deviations) were as follows: clearance, 0.03 (0.01) × weight + 0.67 (0.01) liters/h; volume, 0.82 (0.80) × weight + 1.76 (1.29) liters; first-order rate constant from central compartment to peripheral compartment, 5.36 (6.67) h−1; first-order rate constant from peripheral compartment to central compartment, 9.92 (12.27) h−1. The meta-analysis suggested that the DAmB dosage explained most of the heterogeneity in cerebrospinal fluid (CSF) sterility outcomes but not in mortality outcomes. Simulations of values corresponding to the area under concentration-time curve from h 144 to h 168 (AUC144–168) resulted in median (interquartile range) values of 5.83 mg · h/liter (4.66 to 8.55), 10.16 mg · h/liter (8.07 to 14.55), and 14.51 mg · h/liter (11.48 to 20.42) with dosages of 0.4, 0.7, and 1.0 mg/kg q24h, respectively. DAmB PK is described adequately by a linear model that incorporates weight with clearance and volume. Interpatient PK variability is modest and unlikely to be responsible for variability in clinical outcomes. There is discordance between the impact that drug exposure has on CSF sterility and its impact on mortality outcomes, which may be due to cerebral pathology not reflected in CSF fungal burden, in addition to clinical variables.

The Dephosphorylation of Adenosine 5′ -Triphosphate in a Binary and Ternary Zn2+ Complex

1974 ◽  
Vol 29 (11-12) ◽  
pp. 680-682 ◽  
Author(s):  
Peter Amsler ◽  
David Buisson ◽  
Helmut Sigel
Keyword(s):  
Rate Constant ◽  
Ternary Complex ◽  
Order Rate Constant ◽  
Reactive Species ◽  
Ph Optimum ◽  
First Order ◽  
Order Rate

The dephosphorylation of ATP was characterized by determining the dependence of the first-order rate constant on pH in the absence and presence of Zn2+ and together with Zn2+ and 2,2′-bipyridyl. The Zn2+-accelerated reaction passes through a pH optimum at about 8. The decrease in the rate at higher pH is due to the formation of Zn(ATP) (OH)3-; this species is relatively insensitive towards dephosphorylation. It is concluded that Zn(ATP)2- is the reactive species and that the interaction between N (7) and Zn2+ in this complex is crucial for its reactivity. In the presence of 2,2′-bipyridyl (Bipy) the ternary complex, Zn (Bipy) (ATP)2-, is formed which is rather stable towards dephosphorylation. It is suggested that the described effects of acceleration and inhibition are helpful for understanding the recycled processes in nature.

Kinetics of reconstitution of apotyrosinase by copper

1990 ◽  
Vol 68 (2) ◽  
pp. 476-479
Author(s):  
Donald C. Wigfield ◽  
Douglas M. Goltz
Keyword(s):  
Rate Constant ◽  
Copper Concentration ◽  
Copper Ions ◽  
Copper Ion ◽  
Order Rate Constant ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Rate Limiting ◽  
Kinetics Of

The kinetics of the reconstitution reaction of apotyrosinase with copper (II) ions are reported. The reaction is pseudo first order with respect to apoenzyme and the values of these pseudo first order rate constants are reported as a function of copper (II) concentration. Two copper ions bind to apoenzyme, and if the second one is rate limiting, the kinetically relevant copper concentration is the copper originally added minus the amount used in binding the first copper ion to enzyme. This modified copper concentration is linearly related to the magnitude of the pseudo first order rate constant, up to a copper concentration of 1.25 × 10−4 M (10-fold excess), giving a second order rate constant of 7.67 × 102 ± 0.93 × 102 M−1∙s−1.Key words: apotyrosinase, copper, tyrosinase.

scholarly journals Acrolein, an irreversible active-site-directed inhibitor of deoxyribose 5-phosphate aldolase?

1976 ◽  
Vol 153 (2) ◽  
pp. 495-497 ◽  
Author(s):  
D C Wilton
Keyword(s):  
Schiff Base ◽  
Rate Constant ◽  
Active Site ◽  
Order Rate Constant ◽  
Lysine Residue ◽  
Prolonged Incubation ◽  
Enzyme Active Site ◽  
First Order ◽  
Substrate Analogue ◽  
Pseudo First Order

The enzyme deoxyribose 5-phosphate aldolase was irreversibly inactivated by the substrate analogue acrolein with a pseudo-first-order rate constant of 0.324 min-1 and a Ki (apparent) of 2.7 × 10(-4) m. No inactivation was observed after prolonged incubation with the epoxide analogues glycidol phosphate and glycidaldehyde. It is suggested that the acrolein is first activated by forming a Schiff base with the enzyme active-site lysine residue and it is the activated inhibitor that reacts with a suitable-active-site nucleophile.

An automated approach to characterize, in simple kinetic terms, the generation and inactivation of thrombin and the interaction of fibrinogen with thrombin.

1988 ◽  
Vol 34 (10) ◽  
pp. 1971-1975 ◽  
Author(s):  
D R Hoak ◽  
S K Banerjee ◽  
G Kaldor
Keyword(s):  
Prothrombin Time ◽  
Rate Constant ◽  
Thrombin Generation ◽  
Order Rate Constant ◽  
Clinical Use ◽  
First Order ◽  
Pathological Conditions ◽  
Pseudo First Order ◽  
Instantaneous Concentration

Abstract Here, we used a fully automated, computer-directed centrifugal analyzer (which permitted simultaneous turbidimetry and calculation of results) and purified thrombin, fibrinogen, and various inhibitors to study clot formation. The Km and Vm for these reactions were useful in detecting and partly characterizing anticoagulants. We also explored the generation and inactivation of thrombin, using the two-stage prothrombin time and antithrombin activity tests. The amount of thrombin instantaneously generated and inactivated was monitored under artificially created pathological conditions. The pseudo-first-order rate constant for thrombin generation and inactivation and the instantaneous concentration of enzymatically active and inactive thrombin were used in the characterization of these conditions. We believe this approach is suitable for routine clinical use.

scholarly journals Inactivation of the endogenous argininosuccinate lyase activity of duck δ-crystallin by modification of an essential histidine residue with diethyl pyrocarbonate

1993 ◽  
Vol 293 (2) ◽  
pp. 537-544 ◽  
Author(s):  
H J Lee ◽  
S H Chiou ◽  
G G Chang
Keyword(s):  
Enzyme Activity ◽  
Rate Constant ◽  
Order Rate Constant ◽  
Histidine Residue ◽  
Argininosuccinate Lyase ◽  
First Order ◽  
Diethyl Pyrocarbonate ◽  
Order Rate ◽  
Lyase Activity ◽  
Pseudo First Order

The argininosuccinate lyase activity of duck delta-crystallin was inactivated by diethyl pyrocarbonate at 0 degrees C and pH 7.5. The inactivation followed pseudo-first-order kinetics after appropriate correction for the decomposition of the reagent during the modification period. The plot of the observed pseudo-first-order rate constant versus diethyl pyrocarbonate concentration in the range of 0.17-1.7 mM was linear and went through the origin with a second-order rate constant of 1.45 +/- 0.1 M-1.s-1. The double-logarithmic plot was also linear, with slope of 1.13, which suggested a 1:1 stoichiometry for the reaction between diethyl pyrocarbonate and delta-crystallin. L-Arginine, L-norvaline or L-citrulline protected the argininosuccinate lyase activity of delta-crystallin from diethyl pyrocarbonate inactivation. The dissociation constants for the delta-crystallin-L-arginine and delta-crystallin-L-citrulline binary complexes, determined by the protection experiments, were 4.2 +/- 0.2 and 0.12 +/- 0.04 mM respectively. Fumarate alone had no protective effect. However, fumarate plus L-arginine gave synergistic protection with a ligand binding interacting factor of 0.12 +/- 0.02. The double-protection data conformed to a random Uni Bi kinetic mechanism. Fluorescence-quenching studies indicated that the modified delta-crystallin had minimum, if any, conformational changes as compared with the native delta-crystallin. Inactivation of the enzyme activity was accompanied by an increasing absorbance at 240 nm of the protein. The absorption near 280 nm did not change. Treatment of the modified protein with hydroxylamine regenerated the enzyme activity to the original level. These results strongly indicated the modification of an essential histidine residue. Calculation from the 240 nm absorption changes indicated that only one histidine residue per subunit was modified by the reagent. This super-active histidine residue has a pKa value of approximately 6.8 and acts as a general acid-base catalyst in the enzyme reaction mechanism. Our experimental data are compatible with an E1cB mechanism [Raushel (1984) Arch. Biochem. Biophys. 232, 520-525] for the argininosuccinate lyase with the essential histidine residue close to the arginine-binding domain of delta-crystallin. L-Citrulline, after binding to this domain, might form an extra hydrogen bond with the essential histidine residue.

Decolorization of Methyl Orange Simulated Wastewater by Chlorine Dioxide with Ultrasound

2011 ◽  
Vol 255-260 ◽  
pp. 2904-2908
Author(s):  
Li Jie Huang ◽  
Ting Xu ◽  
Shuang Fei Wang
Keyword(s):  
Methyl Orange ◽  
Rate Constant ◽  
Chlorine Dioxide ◽  
Oxidation Process ◽  
Order Rate Constant ◽  
Pseudo First Order Reaction ◽  
First Order ◽  
Effective Technology ◽  
Simulated Wastewater ◽  
Pseudo First Order

Experiments were conducted to investigate the decolorization of methyl orange simulated wastewater in order to assess the effectiveness and feasibility of ultrasound(US) enhanced high-purity chlorine dioxide(ClO2) oxidation process. The results showed that in ClO2/US system the decolorization rate of methyl orange was up to 96%, which was increased by 8% as compared to ClO2treatment alone. The decolorization of methyl orange with/without ultrasonic irradiation follows apparent pseudo-first-order reaction kinetics. The apparent pseudo-first-order rate constant kappwas 0.19min-1in the ClO2/US system, which was a little higher than 0.13min-1of rate constant achieved in ClO2treatment alone. It shows that ClO2/US system can be an effective technology for the decolorization of azo dyes in wastewater.

The thermal decomposition of cyclobutane-1,2-dione

1985 ◽  
Vol 63 (11) ◽  
pp. 2945-2948 ◽  
Author(s):  
J.-R. Cao ◽  
R. A. Back
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Vapor Pressure ◽  
Gas Phase ◽  
Rate Constant ◽  
Surface Reaction ◽  
Order Rate Constant ◽  
Reaction Vessel ◽  
Arrhenius Parameters ◽  
First Order

The thermal decomposition of cyclobutane-1,2-dione has been studied in the gas phase at temperatures from 120 to 250 °C and pressures from 0.2 to 1.5 Torr. Products were C2H4 + 2CO, apparently formed in a simple unimolecular process. The first-order rate constant was strongly pressure dependent, and values of k∞ were obtained by extrapolation of plots of 1/k vs. 1/p to1/p = 0. Experiments in a packed reaction vessel showed that the reaction was enhanced by surface at the lower temperatures. Arrhenius parameters for k∞, corrected for surface reaction, were log A (s−1) = 15.07(±0.3) and E = 39.3(±2) kcal/mol. This activation energy seems too low for a biradical mechanism, and it is suggested that the decomposition is probably a concerted process. The vapor pressure of solid cyclobutane-1,2-dione was measured at temperatures from 22 to 62 °C and a heat of sublimation of 13.1 kcal/mol was estimated.

Sign in / Sign up

Export Citation Format

Share Document