Nature of the oil/water interface and equilibrium surfactant aggregates in systems exhibiting low tensions

1988 ◽  
Vol 66 (12) ◽  
pp. 3031-3037 ◽  
Author(s):  
Robert Aveyard ◽  
Bernard P. Binks ◽  
Thomas A. Lawless ◽  
Jeremy Mead

Oil/water interfacial tensions are reported for systems containing pure alkane, aqueous sodium chloride, and a pure anionic surfactant, either Aerosol OT or p-dihexylbenzene sodium sulphonate (DHBS). Evidence is produced to support the claim that monolayer adsorption at the oil/water interface can produce ultralow tensions (~ 1 µN m−1), and that the presence at the interface of a third, surfactant-rich phase is not necessary. The aggregation of DHBS and its distribution between oil and aqueous phases of various salinities have been investigated. It has been confirmed that the behaviour of DHBS in these respects is similar to that of Aerosol OT, as might be expected from its molecular structure. The sizes of microemulsion droplets in equilibrium with planar adsorbed monolayers have been determined, and related to the tensions of the plane oil/aqueous phase interfaces using simple existing theory.

2016 ◽  
Vol 18 (3) ◽  
pp. 2059-2069 ◽  
Author(s):  
Hou Dongshuai ◽  
Lu Zeyu ◽  
Zhang Peng ◽  
Ding Qingjun

Structures of water molecules and ions in the vicinity of the surface of portlandite.


1989 ◽  
Vol 1989 (1) ◽  
pp. 317-320
Author(s):  
Gerard P. Canevari ◽  
Jan Bock ◽  
Max Robbins

ABSTRACT An initial basic study focused on the interaction between dispersant surfactants and the oil-water interface. In essence, the study identified criteria to explain why a good dispersant is effective and why a poor dispersant is ineffective. The dynamic behavior of the oil-water interface, after the addition of the dispersant, was continuously monitored by a modified Wilhelmy plate device. This procedure provided much insight on the impact of the dispersant at the oil-water interface. One key finding of this study concerned the conditions for achieving very low interfacial tensions. It is known in microemulsion technology that a microemulsion formed by specific surfactants exhibits ultra-low interfacial tension against either oil or water. Microemulsion phase behavior studies then established that some specific surfactants, which form a certain type of microemulsion, are also highly effective dispersants, more effective than current state-of-the-art products. This improvement results in the formation of much finer dispersed oil droplets generated by a very minimum and lower level of energy. This paper will review the results of the basic study and the subsequent formulation of an improved dispersant. Laboratory and field data evaluating and supporting the improved overall performance will be presented.


Langmuir ◽  
2002 ◽  
Vol 18 (5) ◽  
pp. 1505-1510 ◽  
Author(s):  
Sandrine Nave ◽  
Julian Eastoe ◽  
Richard K. Heenan ◽  
David Steytler ◽  
Isabelle Grillo

1946 ◽  
Vol 133 (870) ◽  
pp. 121-121

The behaviour of positively and negatively charged oil-in-water emulsions, stabilized with hexadecyl trimethyl ammonium bromide and sodium hexadecyl sulphate respectively in the presence of protein solutions has been studied. Under certain conditions proteins will adsorb to a charged oil/water interface. When finely dispersed oil-in-water emulsion was used to provide this oil/water interface, adsorption of protein resulted in flocculation of the oil droplets. Flocculation of emulsion on the addition of protein is pH conditioned and occurred on the acid side of the isoelectric point of the protein with negatively charged and on the alkaline side with positively charged oil globules. No flocculation occurred on the alkaline side of the isoelectric point with a negative emulsion or the acid side with a positive emulsion. The amount of protein required to cause maximum clarification of the subnatant fluid corresponded with that needed to give a firmly gelled protein monolayer at the interface, namely, 2∙5 mg. of protein/sq. m. of interfacial area. With that amount of protein the flocculated oil globules remained discrete and no coalescence or liberation of free oil occurred. If only 1 mg. of protein/sq. m. of interfacial area was added, flocculation was followed by rapid coalescence of oil globules and liberation of free oil. If smaller amounts still were used, no visible change in the dispersion of the oil droplets could be seen macroscopically. With greater amounts than 2∙5 mg. /sq. m. of interfacial area, up to ten times the monolayer concentration was adsorbed to the interface. Sodium chloride affected the flocculation range, and instead of the clear-cut change-over between the positive and negative interfaces at the isoelectric point of the protein, overlapping occurred. 5% sodium chloride shifted the flocculation point about 1 unit of pH . The addition of sodium chloride also altered the point of maximum clarification. Thus with haemoglobin the maximum clarification point was shifted from 2∙5 to 1∙7 mg. /sq. m. of interfacial area by the addition of 1% sodium chloride. The adsorption of protein on to charged oil/water interfaces was reversible. This was best demonstrated with haemoglobin. Thus, haemoglobin was adsorbed at pH 5∙0 to a negative emulsion—the red floccules were washed and transferred to a buffer at pH 10. The haemoglobin was released and the emulsion was redispersed. The effect of adsorption and desorption on the structure of the protein molecule has been studied with haemoglobin. By solubility and colour tests it was shown that the haemoglobin molecule was changed to parahaematin by adsorption and subsequent desorption from a charged oil /water interface. Molecular weight and shape determinations were carried out on the desorbed protein. Two proteins have been separated by this adsorption mechanism. This was demonstrated on a mixture of album in and haemoglobin. Some applications of the flocculation technique are indicated and the significance of the phenomena described are discussed.


The behaviour of positively and negatively charged oil-in-water emulsions, stabilized with hexadecyl trimethyl ammonium bromide and sodium hexadecyl sulphate respectively in the presence of protein solutions has been studied. Under certain conditions proteins will adsorb to a charged oil/water interface. When finely dispersed oil-in-water emulsion was used to provide this oil/water interface, adsorption of protein resulted in flocculation of the oil droplets. Flocculation of emulsion on the addition of protein is pH conditioned and occurred on the acid side of the isoelectric point of the protein with negatively charged and on the alkaline side with positively charged oil globules. No flocculation occurred on the alkaline side of the isoelectric point with a negative emulsion or the acid side with a positive emulsion. The amount of protein required to cause maximum clarification of the subnatant fluid corresponded with that needed to give a firmly gelled protein monolayer at the interface, namely, 2·5 mg. of protein/sq.m, of interfacial area. With that amount of protein the flocculated oil globules remained discrete and no coalescence or liberation of free oil occurred. If only 1 mg. of protein/sq.m, of interfacial area was added, flocculation was followed by rapid coalescence of oil globules and liberation of free oil. If smaller amounts still were used, no visible change in the dispersion of the oil droplets could be seen macroscopically. With greater amounts than 2·5 mg./sq.m, of interfacial area, up to ten times the monolayer concentration was adsorbed to the interface. Sodium chloride affected the flocculation range, and instead of the clear-cut change-over between the positive and negative interfaces at the isoelectric point of the protein, overlapping occurred. 5 % sodium chloride shifted the flocculation point about 1 unit of pH. The addition of sodium chloride also altered the point of maximum clarification. Thus with haemoglobin the maximum clarification point was shifted from 2·5 to 1·7 mg./sq.m. of interfacial area by the addition of 1 % sodium chloride. The adsorption of protein on to charged oil/water interfaces was reversible. This was best demonstrated with haemoglobin. Thus, haemoglobin was adsorbed at pH 5·0 to a negative emulsion— the red floccules were washed and transferred to a buffer at pH 10. The haemoglobin was released and the emulsion was redispersed. The effect of adsorption and desorption on the structure of the protein molecule has been studied with haemoglobin. By solubility and colour tests it was shown that the haemoglobin molecule was changed to parahaematin by adsorption and subsequent desorption from a charged oil/water interface. Molecular weight and shape determinations were carried out on the desorbed protein. Two proteins have been separated by this adsorption mechanism. This was demonstrated on a mixture of albumin and haemoglobin. Some applications of the flocculation technique are indicated and the significance of the phenomena described are discussed.


Sign in / Sign up

Export Citation Format

Share Document