The responses of black spruce growth to an increased proportion of aspen in mixed stands

2004 ◽  
Vol 34 (2) ◽  
pp. 405-416 ◽  
Author(s):  
Sonia Légaré ◽  
David Paré ◽  
Yves Bergeron
Keyword(s):  
Populus Tremuloides ◽  
Black Spruce ◽  
Basal Area ◽  
Stand Density ◽  
Mixed Stands ◽  
Stand Volume ◽  
Abiotic Conditions ◽  
Positive Effects ◽  
Dominant Height ◽  
The Relationship

In the southeastern boreal forest of Canada, the presence of mixed stands of black spruce (Picea mariana (Mill.) BSP) and trembling aspen (Populus tremuloides Michx.) growing in similar abiotic conditions offers the opportunity to study the influence of aspen on stand volume and spruce growth. A regression analysis performed on field data from the ministère des Ressources naturelles du Québec showed a significant relationship between the relative basal area of aspen (aspen relative basal area was determined by the ratio of aspen basal area to total basal area of the stand) and the total stand merchantable volume after accounting for stand density. However, the relationship between total black spruce volume and relative basal area of aspen was not significant, implying that the volume gain was, in fact, aspen fibre. The positive effects of aspen on black spruce DBH and height were only present when the proportion of aspen in the stand ranged between 0% and 41% of the total stand basal area. These results suggest that aspen uses a different niche than black spruce. Furthermore, the significant increase in black spruce dominant height along the aspen gradient suggests that aspen enhances soil fertility by its influence on nutrient availability. The management of mixed stands, which make up an important proportion on the landscape, offers an example as to how commercial management of the forest can be in agreement with ecosystem management.

Algorithmic versions of black spruce stand density management diagrams

1997 ◽  
Vol 73 (2) ◽  
pp. 257-265 ◽  
Author(s):  
P. F. Newton
Keyword(s):  
Black Spruce ◽  
Initial Density ◽  
Basal Area ◽  
Stand Density ◽  
File Transfer ◽  
Quadratic Mean ◽  
Dominant Height ◽  
Yield Production ◽  
Quadratic Mean Diameter ◽  
Stand Density Management

Algorithmic versions of stand density management diagrams (SDMDs) were developed for natural and managed black spruce (Picea mariana (Mill.) B.S.P.) stands. Specifically, the IBM-compatible PC-based algorithms (1) graphically illustrate site-specific size-density trajectories for eight user-specified initial density regimes, (2) given (1), calculate and subsequent tabulate periodic yield estimates (mean dominant height, density, mean volume, total volume, total merchantable volume, quadratic mean diameter, and basal area), and (3) given (2), graphically illustrate empirically-derived yield production curves for total merchantable volume ha−1 and stems m−3 with user-specified operability criteria superimposed. Instructions on acquiring the executable algorithmic versions including the required graphical subroutines via the Internet are described. Currently, the algorithms are restricted in applicability to central insular Newfoundland. Key words: stand density management diagrams, black spruce, algorithms, microcomputer, World-Wide Web (WWW), hypertext browser, file transfer protocol (FTP).

Stand volume tables: Application to black spruce stands of Lebel-sur-Quévillon

1991 ◽  
Vol 67 (6) ◽  
pp. 712-715 ◽  
Author(s):  
Chhun-Huor Ung ◽  
Denis Ouellet
Keyword(s):  
Large Scale ◽  
Black Spruce ◽  
Form Factors ◽  
Basal Area ◽  
Great Stability ◽  
Stand Volume ◽  
Volume Table ◽  
Dominant Height ◽  
Substantial Error ◽  
Spruce Stands

Within the framework of large-scale forest management, the application of Eichhorn's law, which employs dominant height or mean height exclusively to predict tree volumes per hectare, is certainly rapid, but high accuracy is not guaranteed. Substantial error occurred when this method was used in a study of boreal black spruce stands (Picea mariana (Mill.) B.S.P.). Use of both basal area per hectare and dominant height, however, permitted estimation of total volume per hectare and volume to 9 cm top with only 11 and 12% error, respectively. The form factors for total volume and volume to 9 cm top showed great stability. For this reason, use of the simple conventional formula (V = G.H.F.) to estimate standing volumes is justified. Key words: Stand volume table, Eichhorn's law, stand form factor

scholarly journals Soil characteristics mediate the distribution and response of boreal trees to climatic variability

2014 ◽  
Vol 44 (5) ◽  
pp. 487-498 ◽  
Author(s):  
Sylvie Gewehr ◽  
Igor Drobyshev ◽  
Frank Berninger ◽  
Yves Bergeron
Keyword(s):  
Populus Tremuloides ◽  
Black Spruce ◽  
Climatic Variability ◽  
Basal Area ◽  
Organic Layer ◽  
Dormant Period ◽  
Study Region ◽  
Growing Period ◽  
Soil Organic Layer ◽  
The Relationship

We studied the effects of the soil organic layer (SOL) accumulation on growth and distribution of black spruce (Picea mariana (Mill.) BSP) and trembling aspen (Populus tremuloides Michx.) within the Quebec Clay Belt. At the landscape scale, spruce was present over a much larger gradient in SOL thickness (∼1 to 100 cm) than aspen (∼1 to 30 cm). For trees between 60 and 100 years old, SOL thickness had no effect on the basal area increment (BAI) of spruce but showed a strong and negative correlation with BAI in aspen. Radial growth of black spruce was favored by higher precipitation in June of the previous growing season, higher temperatures in early winter and in spring, and by low temperatures in summer. SOL thickness had statistically significant but moderate effects on the climate–growth relationships in spruce, apparently affecting root insulation during the dormant period and water availability during the growing period. In aspen, current-year June temperature was the most important factor positively correlated with growth. The SOL thickness affected the relationship between the aspen growth and (i) January temperature and (ii) June–August monthly drought code. We predict that the response of black spruce to climate change should be rather uniform across the study region, while the response of aspen is likely to be strongly mediated by SOL thickness.

Individual-tree basal area growth models for jack pine and black spruce in northern Ontario

2004 ◽  
Vol 80 (3) ◽  
pp. 366-374 ◽  
Author(s):  
Lianjun Zhang ◽  
Changhui Peng ◽  
Qinglai Dang
Keyword(s):  
Tree Growth ◽  
Black Spruce ◽  
Basal Area ◽  
Jack Pine ◽  
Mixed Stands ◽  
Northern Ontario ◽  
Individual Tree ◽  
Basal Area Growth ◽  
Wide Range ◽  
Area Growth

Individual-tree models of five-year basal area growth were developed for jack pine (Pinus banksiana Lamb.) and black spruce (Picea mariana (Mill.) BSP) in northern Ontario. Tree growth data were collected from long-term permanent plots of pure and mixed stands of the two species. The models were fitted using mixed model methods due to correlated remeasurements of tree growth over time. Since the data covered a wide range of stand ages, stand conditions and tree sizes, serious heterogeneous variances existed in the data. Therefore, the coefficients of the final models were obtained using weighted regression techniques. The models for the two species were evaluated across 4-cm diameter classes using independent data. The results indicated (1) the models of jack pine and black spruce produced similar prediction errors and biases for intermediate-sized trees (12–28 cm in tree diameter), (2) both models yielded relatively large errors and biases for larger trees (> 28 cm) than those for smaller trees, and (3) the jack pine model produced much larger errors and biases for small-sized trees (< 12 cm) than did the black spruce model. Key words: mixed models, repeated measures, model validation

scholarly journals Species Mixing Regulation with Respect to Forest Ecosystem Service Provision

Forests ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 632 ◽  
Author(s):  
Fabian Schwaiger ◽  
Werner Poschenrieder ◽  
Peter Biber ◽  
Hans Pretzsch
Keyword(s):  
Forest Management ◽  
Groundwater Recharge ◽  
Ecosystem Service ◽  
Service Provision ◽  
Quantitative Methods ◽  
Basal Area ◽  
Stand Density ◽  
European Beech ◽  
Stand Age ◽  
Mixed Stands

The control and maintenance of species composition of mixed stands is a highly relevant objective of forest management in order to provide multifunctionality and climatic resilience. In contrast to this requirement there is, however, an evident lack of quantitative methods for mixture regulation. In this context, we propose an approach for the regulation of mixture proportions that has been implemented in a forest management model. The approach considers species-specific growth characteristics and takes into account the mixing effect on stand density. We present five exemplary simulations that apply the regulation. Each simulation maintains one of five desired species compositions. In these simulations, we consider the species European beech and Norway spruce under good site conditions, thus representing the most prominent mixed stands in Central Europe. Based on this model experiment, we analyze the potential benefit of controlled mixing regulation for achieving desired levels and combinations of ecosystem service provision, in particular productivity, diversity, and groundwater recharge. We found that a constant 50% basal area share of beech (equivalent growing space share of 80% to 70% depending on stand age) provided the most balanced supply of ecosystem services. Prominently, groundwater recharge considerably decreased when beech basal area shares were held below 50%. We discuss the ecological and practical implications of the regulation approach and different mixing shares.

Subalpine forest damage from a severe windstorm in northern Colorado

2001 ◽  
Vol 31 (12) ◽  
pp. 2089-2097 ◽  
Author(s):  
Thomas T Veblen ◽  
Dominik Kulakowski ◽  
Karen S Eisenhart ◽  
William L Baker
Keyword(s):  
Populus Tremuloides ◽  
Basal Area ◽  
Stand Density ◽  
Wind Damage ◽  
Forest Damage ◽  
Forest Composition ◽  
Subalpine Forest ◽  
Individual Tree ◽  
Northern Colorado ◽  
Standing Dead

As windstorm intensity increases above some threshold, disturbance spread and damage patterns are expected to be less strongly shaped by preblowdown forest composition and structure than by the pattern of the storm itself. We examined this generalization by analyzing differences in wind damage among tree species and stands following a severe blowdown in 1997 affecting over 10 000 ha of subalpine forest in the Routt Divide area of northern Colorado, U.S.A. Individual tree traits such as species, height, and status as standing dead or alive strongly influenced the amount and type (uprooting vs. snapping) of wind damage. Populus tremuloides Michx. exhibited much less uprooting and overall damage than the conifers. Among the canopy trees of the conifer species, Pinus contorta Dougl. ex. Loud and Abies lasiocarpa (Hook.) Nutt. sustained the lowest and highest rates of snapping, respectively. Standing dead conifers were more likely to be snapped than uprooted, and taller trees were more likely to be damaged than shorter trees. Stand-level characteristics such as stand density, amount of dead basal area, and species composition were predictive of the amount of wind damage for areas of moderate- but not high-severity blowdown. Even in such an extreme windstorm as the Routt blowdown, which had estimated wind speeds of 200–250 km/h, individual tree attributes and stand-level characteristics significantly influenced the severity and type of wind damage.

scholarly journals Evaluating harvest costs and profit of commercial thinnings in softwood stands in west-central Maine: A case study

2015 ◽  
Vol 91 (02) ◽  
pp. 150-160 ◽  
Author(s):  
Patrick Hiesl ◽  
Jeffrey G. Benjamin ◽  
Brian E. Roth
Keyword(s):  
Block Design ◽  
Unit Cost ◽  
Small Diameter ◽  
Wood Chip ◽  
Basal Area ◽  
Stand Density ◽  
Cost Comparison ◽  
Positive Effects ◽  
Commercial Thinning ◽  
West Central

Precommercial thinning (PCT) is a common silvicultural treatment in the management of young conifer forests. The positive effects of PCT on tree growth are well documented, however, there have been few operational studies of thinning productivity associated with later harvests in such stands and associated cost comparison with high-density, small-diameter stands. In the winters of 2012/2013 and 2013/2014 a long-term herbicide and PCT study in west-central Maine was commercially thinned using cut-to-length (CTL) and whole-tree (WT) harvesting systems in PCT and non-PCT stands, respectively. Thinning prescriptions consisted of three nominal removal intensities (33%, 50%, and 66% of the standing softwood volume) in a randomized block design with three to four replications. Stand density, basal area, hardwood content, and removal intensity were not significant in explaining variation in harvester and feller-buncher productivity. An analysis of unit cost of production indicated that wood chip production using a WT system in non-PCT stands is less costly than the production of roundwood using a CTL system in PCT stands. Profit, however, is similar for products harvested by either system. Our conclusion is that the WT system used in the study is economically feasible to treat highdensity, small-diameter stands in a commercial thinning.

Testing the Lake States variant of FVS (Forest Vegetation Simulator) for the main forest types of northern Ontario

2004 ◽  
Vol 80 (4) ◽  
pp. 495-506 ◽  
Author(s):  
V. Lacerte ◽  
G R Larocque ◽  
M. Woods ◽  
W J Parton ◽  
M. Penner
Keyword(s):  
Black Spruce ◽  
Basal Area ◽  
Stand Density ◽  
Site Index ◽  
Forest Vegetation ◽  
Forest Vegetation Simulator ◽  
Consistency Analysis ◽  
Northern Ontario ◽  
Individual Tree ◽  
Stand Basal Area

The Lake States variant of the FVS (Forest Vegetation Simulator) model (LS-FVS), also known as the LS-TWIGS variant of FVS, was validated for black spruce (Picea mariana (Mill.) BSP), white spruce (Picea glauca (Moench) Voss), jack pine (Pinus banksiana Lamb.) and trembling aspen (Populus tremuloides Michx.) forests in northern Ontario. Individual-tree data from 537 remeasured sample plots were used. This dataset included different combinations of site index, stand density and age. It was possible to compare observations and predictions for different projection length periods. The validation exercise included a biological consistency analysis, the computation of mean percent difference (MPD) for stand density, stand basal area, top height and quadratic mean diameter (QMD) and the comparison of observed and predicted individual-tree dbh. The biological consistency analysis indicated that LS-FVS logically predicted the effect of site index on top height, stand basal area and QMD for black spruce and jack pine. However, the decrease in stand basal area at young ages was inconsistent with the normal development pattern of the forest stands under study and was attributed to deficiencies in the prediction of mortality. LS-FVS was found to underpredict stand density, stand basal area and top height and to over-predict QMD. Even though there were large errors in the prediction of change in stand density, LS-FVS was nevertheless consistent in the prediction of the shape of the dbh size distribution. Key words: FVS, Forest Vegetation Simulator, validation, biological consistency analysis

scholarly journals Contrasting Release Approaches for a Mixed Paper Birch (Betula papyrifera)–Quaking Aspen (Populus tremuloides) Stand

2008 ◽  
Vol 25 (3) ◽  
pp. 124-132 ◽  
Author(s):  
Eric K. Zenner ◽  
Klaus J. Puettmann
Keyword(s):  
Populus Tremuloides ◽  
Basal Area ◽  
Complete Removal ◽  
Quaking Aspen ◽  
Betula Papyrifera ◽  
Mixed Stands ◽  
Early Release ◽  
Paper Birch ◽  
Area And Volume

Abstract Early release from competitors can be used to influence the species composition, quality, and rate of development of young stands. Release strategies can vary in intensity, ranging from complete removal of competitors and infrequent future entries (early, heavy, infrequent [EHI]) to lighter entries that are repeated more frequently (early, light, often [ELO]). It is unclear, however, which strategy is more successful for producing high-quality birch sawtimber (Betula papyrifera Marsh.) in mixed stands with aspen (Populus tremuloides Michx.). We evaluated the effects of various release intensities on the growth and mortality of a 16–18-ft-tall natural aspen–paper birch stand in Minnesota following density reductions from 1,500–3,000 trees ac−1 (trees per acre [TPA]) to 750 (ELO750), 500 (EHI500), and 250 (EHI250) TPA. After 6 years, paper birch was overtopped by aspen and contributed only 14% of basal area in control plots, but it occupied all diameter classes and contributed 77–87% of basal area in release plots. The basal area and volume of all paper birch and of only paper birch crop trees (100 largest TPA) were highest in lightly released ELO750 and lowest in control plots. Growth of mean quadratic diameter, basal area, and volume of paper birch was 2–3 times higher in release plots but independent of release intensity. Early release is necessary to maintain paper birch dominance, but there is no short-term advantage among treatment intensities. Long-term growth simulations using the Forest Vegetation Simulator suggest that merchantable timber production was unaffected by release strategy but that the EHI250 strategy produced the most birch sawtimber (40 times as much as in ELO750).

scholarly journals The relationship between volume increment and stand density in Norway spruce plantations

2020 ◽  
Author(s):  
Micky Allen ◽  
Andreas Brunner ◽  
Clara Antón-Fernández ◽  
Rasmus Astrup
Keyword(s):  
Norway Spruce ◽  
Basal Area ◽  
Stand Density ◽  
Management Objectives ◽  
Wide Range ◽  
Volume Increment ◽  
Basic Relationship ◽  
Stand Density Index ◽  
The Relationship ◽  
Experimental Plots

Abstract An understanding of the relationship between volume increment and stand density (basal area, stand density index, etc.) is of utmost importance for properly managing stand density to achieve specific management objectives. There are two main approaches to analyse growth–density relationships. The first relates volume increment to stand density through a basic relationship, which can vary with site productivity, age, and potentially incorporates treatment effects. The second is to relate the volume increment and density of thinned experimental plots relative to that of an unthinned experimental plot on the same site. Using a dataset of 229 thinned and unthinned experimental plots of Norway spruce, a growth model is developed describing the relationship between gross or net volume increment and basal area. The models indicate that gross volume increases with increasing basal area up to 50 m2 and thereafter becomes constant out to the maximum basal area. Alternatively, net volume increment was maximized at a basal area of 43 m2 and decreased with further increases in basal area. However, the models indicated a wide range where net volume increment was essentially constant, varying by less than 1 m3 ha−1 year−1. An analysis of different thinning scenarios indicated that the relative relationship between volume increment and stand density was dynamic and changed over the course of a rotation.

Sign in / Sign up

Export Citation Format

Share Document