The influence of metal halide and high-pressure sodium lamps during photoperiod extension on the allocation of carbon between lignin and cellulose in black spruce seedlings

1988 ◽  
Vol 18 (7) ◽  
pp. 962-964 ◽  
Author(s):  
Hank A. Margolis ◽  
Jacques Bégin ◽  
Richard Beeson ◽  
Pierre Bellefleur
Keyword(s):  
High Pressure ◽  
Light Source ◽  
Black Spruce ◽  
Metal Halide ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Seedling Height ◽  
Active Radiation ◽  
Seedling Biomass

Containerized black spruce seedlings (Piceamariana (Mill.) B.S.P.) were grown at the greenhouse at CIP Inc., Harrington, Québec, from February until May, 1987. We wished to test whether differences in the quantity and quality of light received from two commercially available lamps during photoperiod extension would alter the allocation of carbon between lignin and cellulose in shoots and roots. Photoperiods were extended from 17:00 to 01:00 using either metal halide and high-pressure sodium lamps together or high-pressure sodium lamps alone. At night, the treatment using both types of lamp together increased the photon flux density of blue light (400–500 nm) at seedling height 10-fold, from 0.32 to 3.2 μE m−2 s−1. Photosynthetically active radiation was increased 4-fold, from 4.5 to 17.9 μE m−2 s−1. Total seedling biomass did not differ statistically between light treatments at any given time. However, seedling biomass averaged over all times was statistically higher (p ≤ 0.03) for seedlings in the treatment using both types of lamp together. Percent lignin, percent cellulose, and lignin to cellulose ratios were not significantly affected by the light source used during photoperiod extension. As expected, percent lignin and percent cellulose in shoots and roots increased significantly with time. The percentage of seedlings judged unacceptable because of spiralized stems was not affected by light source and averaged 21.9%.

scholarly journals Effect of Supplementary Light Source on Quality of Grafted Tomato Seedlings and Expression of Two Photosynthetic Genes

Agronomy ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 207 ◽  
Author(s):  
Hao Wei ◽  
Jiangtao Hu ◽  
Chen Liu ◽  
Mengzhao Wang ◽  
Jin Zhao ◽  
...  
Keyword(s):  
Light Source ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
Seedling Production ◽  
White Leds ◽  
Tomato Seedlings ◽  
Photosynthetic Genes ◽  
Supplementary Lighting

Supplementary lighting is commonly used in high-quality seedling production. In this study, grafted tomato seedlings were grown for 10 days in a glasshouse with 16-h daily supplementary lighting at 100 μmol·m−2·s−1 PPFD (Photosynthetic photon flux density) from either high-pressure sodium (HPS), metal halide (MH), far-red (FR), white LEDs (Light emitting diodes) (W), or mixed LEDs (W1R2B1, where the subscript numbers indicate the ratio of the LED chips) to determine which light sources improve the seedling quality. The control seedlings did not receive any supplementary light. Physiological parameters and the expression of genes related to photosynthesis were analyzed. The results showed that root length, biomass, number of leaves, chlorophyll (SPAD), scion dry weight to height ratio (WHR), and specific leaf weight (SLW) were the greatest for grafted seedlings grown in W1R2B1. The level of root ball formation was the greatest for seedlings grown in W1R2B1, followed by those grown in W, HPS, and MH. Seedlings grown in FR did not fare well, as they were very thin and weak. Moreover, the expression of two photosynthetic genes (PsaA and PsbA) was significantly increased by W1R2B1 and W, which suggests that the plastid or nuclear genes might be regulated. The overall results suggest that W1R2B1 was the most suitable light source to enhance the quality of grafted tomato seedlings. The results of this study could be used as a reference for seedling production in glasshouses, and may provide new insights in the research on lights affecting the development of plants.

SUPPLEMENTARY LIGHTING FOR RESEARCH GREENHOUSES

1984 ◽  
Vol 64 (3) ◽  
pp. 773-779 ◽  
Author(s):  
E. ANN CLARK ◽  
M. D. DEVINE
Keyword(s):  
High Pressure ◽  
Plant Growth ◽  
Flux Density ◽  
Growth And Development ◽  
Photosynthetic Photon Flux Density ◽  
Metal Halide ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Photosynthetic Photon Flux ◽  
Supplementary Lighting

The growth and development of six plant species were measured under a standardized photosynthetic photon flux density (PPFD) supplied by fluorescent, metal halide, or high-pressure sodium lamps. Overall, plant growth and seed yield were in the order of high-pressure sodium > metal halide > fluorescent. Although the units tested were unable to supply a uniform, high flux density, acceptable plant growth was achieved under the compromise arrangements used.Key words: Fluorescent, metal halide, high pressure sodium, supplementary lighting

scholarly journals Effect of Pre-Harvest Supplemental UV-A/Blue and Red/Blue LED Lighting on Lettuce Growth and Nutritional Quality

Horticulturae ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 80
Author(s):  
Triston Hooks ◽  
Joseph Masabni ◽  
Ling Sun ◽  
Genhua Niu
Keyword(s):  
Blue Light ◽  
Nutritional Quality ◽  
Uv Light ◽  
Ultra Violet ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Daily Light Integral ◽  
Lettuce Growth ◽  
Supplemental Lighting

Blue light and ultra-violet (UV) light have been shown to influence plant growth, morphology, and quality. In this study, we investigated the effects of pre-harvest supplemental lighting using UV-A and blue (UV-A/Blue) light and red and blue (RB) light on growth and nutritional quality of lettuce grown hydroponically in two greenhouse experiments. The RB spectrum was applied pre-harvest for two days or nights, while the UV-A/Blue spectrum was applied pre-harvest for two or four days or nights. All pre-harvest supplemental lighting treatments had a same duration of 12 h with a photon flux density (PFD) of 171 μmol m−2 s−1. Results of both experiments showed that pre-harvest supplemental lighting using UV A/Blue or RB light can increase the growth and nutritional quality of lettuce grown hydroponically. The enhancement of lettuce growth and nutritional quality by the pre-harvest supplemental lighting was more effective under low daily light integral (DLI) compared to a high DLI and tended to be more effective when applied during the night, regardless of spectrum.

scholarly journals Critical Photoperiod and Optimal Quality of Night Interruption Light for Runner Induction in June-Bearing Strawberries

Agronomy ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1996
Author(s):  
Yali Li ◽  
Jie Xiao ◽  
Jiangtao Hu ◽  
Byoung Ryong Jeong
Keyword(s):  
Red Light ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Emitting ◽  
Red Led ◽  
Critical Photoperiod ◽  
Closed Walk ◽  
White Light Emitting Diodes ◽  
Optimal Quality

The optimal photoperiod and light quality for runner induction in strawberries ‘Sulhyang’ and ‘Maehyang’ were investigated. Two experiments were carried out in a semi-closed walk-in growth chamber with 25/15 °C day/night temperatures and a light intensity of 250 μmol·m–2·s–1photosynthetic photon flux density (PPFD) provided from white light-emitting diodes (LEDs). In the first experiment, plants were treated with a photoperiod of either 12, 14, 16, 18, 20, or 22 h In the second experiment, a total of 4 h of night interruption (NI) light at an intensity of 70 μmol·m–2·s–1PPFD provided from either red, blue, green, white, or far-red LED in addition to 11 h short day (SD). The results showed that both ‘Sulhyang’ and ‘Maehyang’ produced runners when a photoperiod was longer than 16 h, and the number of runners induced positively correlated with the length of photoperiod. However, the plant growth, contents of chlorophyll, sugar and starch, and Fv/Fo decreased in a 22 h photoperiod. All qualities of the NI light, especially red light, significantly increased the number of runners and daughter plants induced per plant as compared with those in the SD treatment in both cultivars. In a conclusion, a photoperiod between 16 and 20 h and NI light, especially red NI light, can be used for quality runner induction in both ‘Sulhyang’ and ‘Maehyang’.

scholarly journals A New Clear-Sky Method for Assessing Photosynthetically Active Radiation at the Surface Level

Atmosphere ◽  
2019 ◽  
Vol 10 (4) ◽  
pp. 219
Author(s):  
William Wandji Nyamsi ◽  
Philippe Blanc ◽  
John A. Augustine ◽  
Antti Arola ◽  
Lucien Wald
Keyword(s):  
Photosynthetically Active Radiation ◽  
Photosynthetic Photon Flux Density ◽  
Surface Radiation ◽  
Radiation Budget ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Distribution Method ◽  
Active Radiation ◽  
Surface Level ◽  
Clear Sky

A clear–sky method to estimate the photosynthetically active radiation (PAR) at the surface level in cloudless atmospheres is presented and validated. It uses a fast and accurate approximation adopted in several radiative transfer models, known as the k-distribution method and the correlated-k approximation, which gives a set of fluxes accumulated over 32 established wavelength intervals. A resampling technique, followed by a summation, are applied over the wavelength range [0.4, 0.7] µm in order to retrieve the PAR fluxes. The method uses as inputs the total column contents of ozone and water vapor, and optical properties of aerosols provided by the Copernicus Atmosphere Monitoring Service. To validate the method, its outcomes were compared to instantaneous global photosynthetic photon flux density (PPFD) measurements acquired at seven experimental sites of the Surface Radiation Budget Network (SURFRAD) located in various climates in the USA. The bias lies in the interval [−12, 61] µmol m−2 s−1 ([−1, 5] % in values relative to the means of the measurements at each station). The root mean square error ranges between 37 µmol m−2 s−1 (3%) and 82 µmol m−2 s−1 (6%). The squared correlation coefficient fluctuates from 0.97 to 0.99. This comparison demonstrates the high level of accuracy of the presented method, which offers an accurate estimate of PAR fluxes in cloudless atmospheres at high spatial and temporal resolutions useful for several bio geophysical models.

scholarly journals Spectral Characterization of Difusse Par Irradiance under Tipuana Tipu Shading

2018 ◽  
Vol 75 (1) ◽  
pp. 19
Author(s):  
Gonzalo GURREA-YSASI ◽  
Vicente BLANCA ◽  
Ana FITA ◽  
Jaime PROHENS ◽  
Inmaculada FITA ◽  
...  
Keyword(s):  
Near Infrared ◽  
Infrared Region ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Tree Canopies ◽  
Common Tree ◽  
Soil Level

Tipa (Tipuana tipu) is a common tree in gardens and carparks, although the shading effect of its canopy must be still characterised to assess the decrease of temperature and quality of irradiance. This work is a preliminary study aimed to assess the effect of shading of tree canopies on the diffuse irradiance pattern received at the soil level in comparison to other conditions. The shade provided by a group of Tipa trees, located at the Universitat Politècnica de València (Valencia, Spain), was evaluated in this experiment and compared to cloudy days and direct sun. Photosynthetic Photon Flux Density (PPFD) and red/near infrared ratios were recorded with a portable spectrometer. Measurements were recorded in January and February 2017, at 10h, 13h and 16h. Depending on the region of the spectrum and time of the day, PPFD values ranged from 0.05 to 0.42, 0.40 to 1.14, and 0.94 to 3.90 μmol·m-2·s-1, for Tipa shade, cloudy days and direct sun, respectively. The spectral analysis of PPFD in cloudy days revealed maximum values in the green region and minimum at near infrared region, while maximum PPFD for tipa shade was mostly found at near infrared, revealing higher importance of this spectral region compared to cloudy days.

Effects of climate warming on canopy water dynamics of a boreal black spruce plantation

2011 ◽  
Vol 41 (2) ◽  
pp. 217-227 ◽  
Author(s):  
Ingrid G. Van Herk ◽  
Stith T. Gower ◽  
Dustin R. Bronson ◽  
Myron S. Tanner
Keyword(s):  
Flux Density ◽  
Black Spruce ◽  
Photosynthetic Photon Flux Density ◽  
Water Dynamics ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Sap Flux ◽  
Photosynthetic Photon Flux ◽  
Entire Study ◽  
Soil Temperatures

The purpose of this study was to quantify the effects of climate change (in the form of elevated air and soil temperatures) on transpiration and sap flux rates of black spruce ( Picea mariana (Mill.) BSP). Five treatments were established in northern Manitoba, Canada, with the experimental design consisting of heated and control blocks. Air and soil temperatures were maintained approximately 5 °C above control temperatures using greenhouse chambers. Two of the chambers also included controls to maintain ambient vapor pressure difference (VPD). Sap flux (JS), was not significantly different among treatments in the May or July time periods. However, JS was significantly greater for heated VPD controlled trees than for trees in all other treatments when averaged over the entire study period. JS was positively correlated to photosynthetic photon flux density for all trees. Lower photosynthetic photon flux density in chamber treatments resulted in the creation of models used to estimate JS and canopy transpiration (EC) values that were used in the analysis. Average daily and cumulative growing season EC values were significantly greater for the heated VPD controlled treatments than for other treatments. The results from this study suggest that EC of boreal black spruce will increase if VPD remains unchanged while air temperatures increase.

scholarly journals Deriving Photosynthetically Active Radiation at ground level in cloud-free conditions from Copernicus Atmospheric Monitoring Service (CAMS) products

2018 ◽  
Author(s):  
William Wandji Nyamsi ◽  
Phillipe Blanc ◽  
John A. Augustine ◽  
Antti Arola ◽  
Lucien Wald
Keyword(s):  
Photosynthetically Active Radiation ◽  
Ground Level ◽  
Photosynthetic Photon Flux Density ◽  
Surface Radiation ◽  
Coefficient Of Determination ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Distribution Method ◽  
Active Radiation ◽  
Monitoring Service

Abstract. A method is described that estimates the photosynthetically active radiation (PAR) at ground level in cloud-free conditions. It uses a fast approximation of the libRadtran radiative transfer numerical model, known as the k-distribution method and the correlated-k approximation of Kato et al. (1999). LibRadtran provides irradiances aggregated over several fixed spectral bands and a spectral resampling is proposed followed by an aggregation in the range [400, 700] nm. The Copernicus Atmosphere Monitoring Service (CAMS) produces daily estimates of the aerosol properties, and total column contents in water vapor and ozone that are input to the method. A comparison of the results is performed against instantaneous measurements of global Photosynthetic Photon Flux Density (PPFD) on a horizontal plane made in cloud-free conditions at seven sites of the Surface Radiation network (SURFRAD) in the USA in various climates. The bias ranges between −12 µmol m−2 s−1 (−1 % of the mean value at Desert Rock) and +61 µmol m−2 s−1 (+5 % at Penn. State Univ). The root mean square error ranges from 37 µmol m−2 s−1 (3 %) to 82 µmol m−2 s−1 (6 %). The coefficient of determination R2 ranges between 0.97 and 0.99. This work demonstrates the quality of the proposed method combined with the CAMS products.

scholarly journals Light-emitting Diodes Can Replace High-pressure Sodium Lighting for Cut Gerbera Production

HortScience ◽  
2019 ◽  
Vol 54 (1) ◽  
pp. 95-99 ◽  
Author(s):  
Dave Llewellyn ◽  
Katherine Schiestel ◽  
Youbin Zheng
Keyword(s):  
High Pressure ◽  
Treatment Effects ◽  
Light Emitting Diode ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Vase Life ◽  
Light Emitting ◽  
Greenhouse Study ◽  
Flower Diameter

A greenhouse study was undertaken to investigate whether light-emitting diode (LED) technology can be used to replace high-pressure sodium (HPS) lighting for cut gerbera production during Canada’s traditional supplemental lighting (SL) season (November to March). The study was carried out at the University of Guelph’s research greenhouse, using concurrent replications of SL treatments within the same growing environment. LED (85% red, 15% blue) and HPS treatment plots were set up to provide equal amounts of supplemental photosynthetically active radiation (PAR) at bench level. This setup was used to assess the production of three cultivars of cut gerbera (Gerbera jamesonii H. Bolus ex Hook.f): Acapulco, Heatwave, and Terra Saffier. There were no treatment differences in SL intensity, with average SL photosynthetic photon flux density (PPFD) and daily light integral (DLI) of 55.9 µmol·m−2·s−1 and 2.3 mol·m−2·d−1, respectively. Flowers harvested from the LED treatment had a 1.9% larger flower diameter in ‘Acapulco’; 4.2% shorter and 3.8% longer stems in ‘Heatwave’ and ‘Terra Saffier’, respectively; and 7.7% and 8.6% higher fresh weights for ‘Acapulco’ and ‘Terra Saffier’, respectively, compared with flowers harvested from the HPS treatment. There were no differences in accumulated total or marketable flower harvests for any of the cultivars. The vase life of ‘Acapulco’ flowers grown under the LED treatment was 2.7 d longer than those grown under the HPS treatment, but there were no SL treatment effects on water uptake for any of the cultivars during the vase life trials. There were no SL treatment effects on specific leaf area for any of the cultivars. There were only minimal treatment differences in leaf, soil, and air temperatures. Cut gerbera crops grown with under LED SL had equivalent or better production and crop quality metrics compared with crops grown under HPS SL.

scholarly journals Growth and Energy Use Efficiency of Grafted Tomato Transplants as Affected by LED Light Quality and Photon Flux Density

Agriculture ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 816
Author(s):  
Jianfeng Zheng ◽  
Peidian Gan ◽  
Fang Ji ◽  
Dongxian He ◽  
Po Yang
Keyword(s):  
Energy Use ◽  
Light Quality ◽  
Red Light ◽  
Electrical Energy ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Red Led ◽  
Use Efficiency ◽  
Led Lights

This study was conducted to compare the effects of broad spectrum during the whole seedling period and photon flux density (PFD) in the healing stage on the growth and energy use efficiency of grafted tomato (Lycopersicon esculentum Mill.) transplants in a plant factory. Fluorescent lights, white LED lights, and white plus red LED lights were applied at the growth processes of grafted tomato transplants from germination of rootstock and scion to post-grafting. Three levels of PFD (50, 100, 150 μmol m−2 s−1) were set in the healing stage under each kind of light quality. The results indicated that the growth and quality of grafted tomato transplants under different broad spectrums were influenced by the ratio of red to blue light (R/B ratio) and the ratio of red to far-red light (R/FR ratio). A higher R/B ratio was beneficial to total dry matter accumulation, but excessive red light had a negative effect on the root to shoot ratio and the seedling quality index. The higher blue light and R/FR ratio suppressed stem extension synergistically. The LED lights had good abilities to promote plant compactness and leaf thickness in comparison with fluorescent lights. The plant compactness and leaf thickness increased with the increase in daily light integral in the healing stage within a range from 2.5 to 7.5 mol m−2 d−1 (PFD, 50 to 150 μmol m−2 s−1). Compared to fluorescent lights, the LED lights showed more than 110% electrical energy saving for lighting during the whole seedling period. Higher PFD in the healing stage did not significantly increase the consumption of electric power for lighting. White plus red LED lights with an R/B ratio of 1.2 and R/FR ratio of 16 were suggested to replace fluorescent lights for grafted tomato transplants production considering the high quality of transplants and electrical energy saving, and PFD in the healing stage was recommended to be set to 150 μmol m−2 s−1.

Sign in / Sign up

Export Citation Format

Share Document