scholarly journals Effect of Supplementary Light Source on Quality of Grafted Tomato Seedlings and Expression of Two Photosynthetic Genes

Agronomy ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 207 ◽  
Author(s):  
Hao Wei ◽  
Jiangtao Hu ◽  
Chen Liu ◽  
Mengzhao Wang ◽  
Jin Zhao ◽  
...  
Keyword(s):  
Light Source ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
Seedling Production ◽  
White Leds ◽  
Tomato Seedlings ◽  
Photosynthetic Genes ◽  
Supplementary Lighting

Supplementary lighting is commonly used in high-quality seedling production. In this study, grafted tomato seedlings were grown for 10 days in a glasshouse with 16-h daily supplementary lighting at 100 μmol·m−2·s−1 PPFD (Photosynthetic photon flux density) from either high-pressure sodium (HPS), metal halide (MH), far-red (FR), white LEDs (Light emitting diodes) (W), or mixed LEDs (W1R2B1, where the subscript numbers indicate the ratio of the LED chips) to determine which light sources improve the seedling quality. The control seedlings did not receive any supplementary light. Physiological parameters and the expression of genes related to photosynthesis were analyzed. The results showed that root length, biomass, number of leaves, chlorophyll (SPAD), scion dry weight to height ratio (WHR), and specific leaf weight (SLW) were the greatest for grafted seedlings grown in W1R2B1. The level of root ball formation was the greatest for seedlings grown in W1R2B1, followed by those grown in W, HPS, and MH. Seedlings grown in FR did not fare well, as they were very thin and weak. Moreover, the expression of two photosynthetic genes (PsaA and PsbA) was significantly increased by W1R2B1 and W, which suggests that the plastid or nuclear genes might be regulated. The overall results suggest that W1R2B1 was the most suitable light source to enhance the quality of grafted tomato seedlings. The results of this study could be used as a reference for seedling production in glasshouses, and may provide new insights in the research on lights affecting the development of plants.

scholarly journals The Effects of Different Supplementary Light Sources on the Quality of Grafted Tomato Seedlings and the Expression of Two Photosynthetic Genes

2018 ◽  
Author(s):  
Hao Wei ◽  
Jiangtao Hu ◽  
Chen Liu ◽  
Mengzhao Wang ◽  
Jin Zhao ◽  
...  
Keyword(s):  
Dry Weight ◽  
Light Sources ◽  
Seedling Production ◽  
White Leds ◽  
Tomato Seedlings ◽  
Photosynthetic Genes ◽  
Expression Of Genes ◽  
Number Of Leaves ◽  
Supplementary Lighting

Supplementary lighting is commonly used in high-quality seedling production. In this study, grafted tomato seedlings were grown for 10 days in a glasshouse with a 16-hour daily supplementary lighting at 100 μmol·m−2·s−1 PPFD from either high pressure sodium (HPS), metal halide (MH), far-red (FR), white LEDs (W), or mixed LEDs (W1R2B1) to determine which light sources improve the seedling quality. The control did not have any supplementary light. The physiological parameters and the expression of genes related to photosynthesis were analyzed. The results show that the root length, biomass, number of leaves, chlorophyll (SPAD), dry weight to height ratio (WHR) of the scion, and specific leaf weight (SLW) were the greatest for grafted seedlings grown in W1R2B1. The level of root ball formation was the greatest for seedlings grown in W1R2B1, followed by those grown in W, HPS, and MH. Seedlings grown in FR did not fare very well, as they were very thin and weak. Moreover, the expression of two photosynthetic genes (PsaA and PsbA) was significantly increased by W1R2B1 and W, which suggests that the plastid or nuclear genes might be regulated. The overall results suggest that W1R2B1 was the most suitable light source to enhance the quality of grafted tomato seedlings. The results of this study could be used as a reference for seedling production in glasshouses, and provide new insights in the research of lights affecting the development of plants.

scholarly journals Effect of Supplementary Light Intensity on Quality of Grafted Tomato Seedlings and Expression of Two Photosynthetic Genes and Proteins

Agronomy ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 339 ◽  
Author(s):  
Hao Wei ◽  
Jin Zhao ◽  
Jiangtao Hu ◽  
Byoung Ryong Jeong
Keyword(s):  
Light Intensity ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Natural Lighting ◽  
Tomato Seedlings ◽  
Photosynthetic Genes ◽  
Supplemental Lighting

Lower quality and longer production periods of grafted seedlings, especially grafted plug seedlings of fruit vegetables, may result from insufficient amounts of light, particularly in rainy seasons and winter. Supplemental artificial lighting may be a feasible solution to such problems. This study was conducted to evaluate light intensity’s influence on the quality of grafted tomato seedlings, ‘Super Sunload’ and ‘Super Dotaerang’ were grafted onto the ‘B-Blocking’ rootstock. To improve their quality, grafted seedlings were moved to a glasshouse and grown for 10 days. The glasshouse had a combination of natural lighting from the sun and supplemental lighting from LEDs (W1R2B2) for 16 h/day. Light intensity of natural lighting was 490 μmol·m−2·s−1 photosynthetic photon flux density (PPFD) and that of supplemental lighting was 50, 100, or 150 μmol·m−2·s−1 PPFD. The culture environment had 30/25 °C day/night temperatures, 70% ± 5% relative humidity (RH), and a natural photoperiod of 14 h as well. Compared with quality of seedlings in supplemental lighting of 50 μmol·m−2·s−1 PPFD, that of seedlings in supplement lighting of 100 or 150 μmol·m−2·s−1 PPFD improved significantly. With increasing light intensity, diameter, fresh weight, and dry weight, which were used to measure shoot growth, greatly improved. Leaf area, leaf thickness, and root biomass were also greater. However, for quality of seedlings, no significant differences were discovered between supplement lighting of 100 μmol·m−2·s−1 PPFD and supplement lighting of 150 μmol·m−2·s−1 PPFD. Expressions of PsaA and PsbA (two photosynthetic genes) as well as the corresponding proteins increased significantly in supplement lightning of 100 and 150 μmol·m−2·s−1 PPFD, especially in 100 μmol·m−2·s−1 PPFD. Overall, considering quality and expressions of two photosynthetic genes and proteins, supplemental light of 100 μmol·m−2·s−1 PPFD (W1R2B1) would be the best choice to cultivate grafted tomato seedlings.

The influence of metal halide and high-pressure sodium lamps during photoperiod extension on the allocation of carbon between lignin and cellulose in black spruce seedlings

1988 ◽  
Vol 18 (7) ◽  
pp. 962-964 ◽  
Author(s):  
Hank A. Margolis ◽  
Jacques Bégin ◽  
Richard Beeson ◽  
Pierre Bellefleur
Keyword(s):  
High Pressure ◽  
Light Source ◽  
Black Spruce ◽  
Metal Halide ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Seedling Height ◽  
Active Radiation ◽  
Seedling Biomass

Containerized black spruce seedlings (Piceamariana (Mill.) B.S.P.) were grown at the greenhouse at CIP Inc., Harrington, Québec, from February until May, 1987. We wished to test whether differences in the quantity and quality of light received from two commercially available lamps during photoperiod extension would alter the allocation of carbon between lignin and cellulose in shoots and roots. Photoperiods were extended from 17:00 to 01:00 using either metal halide and high-pressure sodium lamps together or high-pressure sodium lamps alone. At night, the treatment using both types of lamp together increased the photon flux density of blue light (400–500 nm) at seedling height 10-fold, from 0.32 to 3.2 μE m−2 s−1. Photosynthetically active radiation was increased 4-fold, from 4.5 to 17.9 μE m−2 s−1. Total seedling biomass did not differ statistically between light treatments at any given time. However, seedling biomass averaged over all times was statistically higher (p ≤ 0.03) for seedlings in the treatment using both types of lamp together. Percent lignin, percent cellulose, and lignin to cellulose ratios were not significantly affected by the light source used during photoperiod extension. As expected, percent lignin and percent cellulose in shoots and roots increased significantly with time. The percentage of seedlings judged unacceptable because of spiralized stems was not affected by light source and averaged 21.9%.

scholarly journals Effects of White LED Lighting with Specific Shorter Blue and/or Green Wavelength on the Growth and Quality of Two Lettuce Cultivars in a Vertical Farming System

Agronomy ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2111
Author(s):  
Thi Kim Loan Nguyen ◽  
Kye Man Cho ◽  
Hee Yul Lee ◽  
Du Yong Cho ◽  
Ga Oun Lee ◽  
...  
Keyword(s):  
Energy Use ◽  
Light Emitting Diode ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
Romaine Lettuce ◽  
Led Light ◽  
Positive Effects ◽  
Vertical Farming

White (W) light-emitting diode (LED) light has been used as an efficient light source for commercial plant cultivation in vertical farming. This study aimed to examine the effect of W LED light sources on the growth and quality of butterhead and romaine lettuce. Three W LED light sources including normal W light (NWL) which has 450 nm as its pumping wavelength and two specific W lights (SWL1 and SWL2) with shorter blue peak wavelength (437 nm) were used to grow lettuce in comparison to a red (R) and blue (B) LED combination. As a result, SWL1 and SWL2 treatments with the same electrical power or photosynthetic photon flux density (PPFD) resulted in more growth of both lettuce cultivars compared to RB treatment. Some phenolic and flavonol contents were increased in the RB treatment, whereas SWL2 treatment stimulated the accumulation of other phenolic and flavonol compounds. Meanwhile, neither NWL nor SWL1 treatments increased the individual phenolic and flavonol contents in either cultivar (except for some flavonols in romaine lettuce in the SWL1 group). In addition, light and energy use efficiencies were also highest in the SWL1 and SWL2 treatments. These results illustrate the positive effects of specific W LED light on lettuce growth and quality, and suggest that the specific W LED light sources, especially SWL2, could be preferably used in vertical farming.

scholarly journals Supplementary Light Source Affects the Growth and Development of Codonopsis lanceolata Seedlings

2018 ◽  
Vol 19 (10) ◽  
pp. 3074 ◽  
Author(s):  
Xiuxia Ren ◽  
Ya Liu ◽  
Hai Jeong ◽  
Byoung Jeong
Keyword(s):  
Light Source ◽  
Soluble Sugar ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Root Weight ◽  
Total Biomass ◽  
Codonopsis Lanceolata ◽  
Shoot Weight ◽  
Supplementary Lighting

Codonopsis lanceolata is widely used in traditional medicine and diets. However, there is no optimal protocol for the commercial production of C. lanceolata seedlings. This study was carried out to find the optimum supplementary light source for the production of C. lanceolata seedlings. Seedlings were grown for four weeks in a glasshouse with an average daily light intensity of 490 μmol·m−2·s−1 photosynthetic photon flux density (PPFD) coming from the sun and a 16-h daily supplementary lighting at 120 μmol·m−2·s−1 PPFD from either high-pressure sodium (HPS), metal halide (MH), far-red (FR), white LED (LED-w), or mixed (white: red: blue = 1:2:1) LEDs (LED-mix). The results showed that the greatest total biomass, stem diameter, ratio of shoot weight to shoot length, root biomass, and ratio of root weight to shoot weight were found in seedlings grown under supplementary LED-mix. Meanwhile, the stomatal properties and soluble sugar contents were improved for seedlings in LED-mix. The contents of starch, total phenols, and flavonoids were the greatest for seedlings in LED-w and LED-mix. The expression of photosynthetic proteins and genes in seedlings was also enhanced by LED-mix. Overall, these results suggest that LED-mix is advantageous to the photosynthetic potential and the accumulation of biomass, carbohydrates and secondary metabolites in C. lanceolata.

scholarly journals Supplementary Light Source Affects Growth and Development of Carnation ‘Dreambyul’ Cuttings

Agronomy ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1217
Author(s):  
Mengzhao Wang ◽  
Jie Xiao ◽  
Hao Wei ◽  
Byoung Ryong Jeong
Keyword(s):  
Light Source ◽  
Root Formation ◽  
Dianthus Caryophyllus ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Shoot Biomass ◽  
Photon Flux Density ◽  
Light Sources ◽  
Cut Flowers ◽  
Light Emitting

Carnation (Dianthus caryophyllus L.) is a major floricultural crop, cultivated widely for cut flowers. This study was conducted to determine the optimal supplementary light source for the cutting propagation of carnation ‘Dreambyul’ cuttings. Terminal cuttings were propagated in a glasshouse with an average of 260 µmol·m−2·s−1 photosynthetic photon flux density (PPFD) coming from the sun (the control), supplemented with one of three artificial light sources: mixed (red: blue: white = 6:1:1) light-emitting diodes (LED-mix), metal halide (MH) lamps, or high-pressure sodium (HPS) lamps. The supplementary light was provided from 7:00 to 17:00 h at 100 µmol·m−2·s−1 PPFD during propagation. The cuttings were kept on a fogged bench in a glasshouse for 25 days with 24/15 °C day/night temperatures and 88% relative humidity. Compared with the control, better root formation was observed from cuttings grown under the supplementary lights after 10 days. After 25 days of propagation, MH significantly increased the root length, root number, root fresh and dry weights, and shoot biomass, shoot length, and shoot fresh and dry weights. The best root ball formation and the highest root activities were also found in cuttings propagated with supplementary MH light. Supplementary light increased the plant temperature, quantum yield, stomatal conductance, and the contents of chlorophyll, soluble proteins, and carbohydrates. Overall, the root formation and development of carnation ‘Dreambyul’ cuttings were significantly promoted by the three supplementary light sources. Of the three, MH was identified as the optimal supplementary light source.

scholarly journals Effect of Supplementary Lighting Duration on Growth and Activity of Antioxidant Enzymes in Grafted Watermelon Seedlings

Agronomy ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 337 ◽  
Author(s):  
Hao Wei ◽  
Mengzhao Wang ◽  
Byoung Ryong Jeong
Keyword(s):  
Light Intensity ◽  
Growth And Development ◽  
Weight Ratio ◽  
Dry Weight ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Antioxidant Enzyme Activities ◽  
Total Biomass ◽  
Supplementary Lighting

Insufficient exposure to light in the winter may result in a longer production periods and lower quality of seedlings in greenhouses for plug growers. Supplementary artificial lighting to plug seedlings may be one solution to this problem. The objective of this study was to assess the effects of the duration of the supplementary light on the growth and development of two watermelon cultivars, ‘Speed’ and ‘Sambok Honey’ grafted onto ‘RS-Dongjanggun’ bottle gourd rootstocks (Lagenaria siceraria Stanld). Seedlings were grown for 10 days in a glasshouse with an average daily natural light intensity of 340 μmol·m−2·s−1 photosynthetic photon flux density (PPFD) and daily supplementary lighting of 8, 12 or 16 h from mixed LEDs (W1R2B1, chip ratio of white:red:blue = 1:2:1) at a light intensity of 100 μmol·m−2·s−1 PPFD, a group without supplementary light was set as the control (CK). The culture environment in a glasshouse had 25/15 °C day/night temperatures, an 85 ± 5% relative humidity, and a natural photoperiod of 8 h. The results showed that all the growth and development parameters of seedlings grown with supplementary light were significantly greater than those without supplementary light (CK). The 12 and 16 h supplementary light resulted in greater growth and development parameters than the 8 h supplementary light did. The same trend was also found with the indexes that reflect the quality of the seedlings, such as the dry weight ratio of the shoot and root, total biomass, dry weight to height ratio of scions, and specific leaf weight. The 12 h and 16 h light supplements resulted in greater Dickson’s quality indexes compared to the 8 h supplementary light, and the 12 h supplementary light showed the greatest use efficiency of the supplementary light. 16 h of daily supplementary light significantly increased the H2O2 content and the antioxidant enzyme activities in seedlings compared to the other treatments. This indicated that 16 h of supplementary light led to certain stresses in watermelon seedlings. In conclusion, considering the energy consumption, 12 h of supplementary light was the most efficient in improving the quality of the two cultivars of grafted watermelon plug seedlings.

scholarly journals Effect of Pre-Harvest Supplemental UV-A/Blue and Red/Blue LED Lighting on Lettuce Growth and Nutritional Quality

Horticulturae ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 80
Author(s):  
Triston Hooks ◽  
Joseph Masabni ◽  
Ling Sun ◽  
Genhua Niu
Keyword(s):  
Blue Light ◽  
Nutritional Quality ◽  
Uv Light ◽  
Ultra Violet ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Daily Light Integral ◽  
Lettuce Growth ◽  
Supplemental Lighting

Blue light and ultra-violet (UV) light have been shown to influence plant growth, morphology, and quality. In this study, we investigated the effects of pre-harvest supplemental lighting using UV-A and blue (UV-A/Blue) light and red and blue (RB) light on growth and nutritional quality of lettuce grown hydroponically in two greenhouse experiments. The RB spectrum was applied pre-harvest for two days or nights, while the UV-A/Blue spectrum was applied pre-harvest for two or four days or nights. All pre-harvest supplemental lighting treatments had a same duration of 12 h with a photon flux density (PFD) of 171 μmol m−2 s−1. Results of both experiments showed that pre-harvest supplemental lighting using UV A/Blue or RB light can increase the growth and nutritional quality of lettuce grown hydroponically. The enhancement of lettuce growth and nutritional quality by the pre-harvest supplemental lighting was more effective under low daily light integral (DLI) compared to a high DLI and tended to be more effective when applied during the night, regardless of spectrum.

scholarly journals Critical Photoperiod and Optimal Quality of Night Interruption Light for Runner Induction in June-Bearing Strawberries

Agronomy ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1996
Author(s):  
Yali Li ◽  
Jie Xiao ◽  
Jiangtao Hu ◽  
Byoung Ryong Jeong
Keyword(s):  
Red Light ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Emitting ◽  
Red Led ◽  
Critical Photoperiod ◽  
Closed Walk ◽  
White Light Emitting Diodes ◽  
Optimal Quality

The optimal photoperiod and light quality for runner induction in strawberries ‘Sulhyang’ and ‘Maehyang’ were investigated. Two experiments were carried out in a semi-closed walk-in growth chamber with 25/15 °C day/night temperatures and a light intensity of 250 μmol·m–2·s–1photosynthetic photon flux density (PPFD) provided from white light-emitting diodes (LEDs). In the first experiment, plants were treated with a photoperiod of either 12, 14, 16, 18, 20, or 22 h In the second experiment, a total of 4 h of night interruption (NI) light at an intensity of 70 μmol·m–2·s–1PPFD provided from either red, blue, green, white, or far-red LED in addition to 11 h short day (SD). The results showed that both ‘Sulhyang’ and ‘Maehyang’ produced runners when a photoperiod was longer than 16 h, and the number of runners induced positively correlated with the length of photoperiod. However, the plant growth, contents of chlorophyll, sugar and starch, and Fv/Fo decreased in a 22 h photoperiod. All qualities of the NI light, especially red light, significantly increased the number of runners and daughter plants induced per plant as compared with those in the SD treatment in both cultivars. In a conclusion, a photoperiod between 16 and 20 h and NI light, especially red NI light, can be used for quality runner induction in both ‘Sulhyang’ and ‘Maehyang’.

scholarly journals Optimal LED Wavelength Composition for the Production of High-Quality Watermelon and Interspecific Squash Seedlings Used for Grafting

Agronomy ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 870 ◽  
Author(s):  
Filippos Bantis ◽  
Athanasios Koukounaras ◽  
Anastasios S. Siomos ◽  
Kalliopi Radoglou ◽  
Christodoulos Dangitsis
Keyword(s):  
Blue Emission ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Stem Diameter ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
High Quality ◽  
Light Emitting ◽  
Shoot Dry Weight

Watermelon is cultivated worldwide and is mainly grafted onto interspecific squash rootstocks. Light-emitting diodes (LEDs) can be implemented as light sources during indoor production of both species and their spectral quality is of great importance. The objective of the present study was to determine the optimal emission of LEDs with wide wavelength for the production of watermelon and interspecific squash seedlings in a growth chamber. Conditions were set at 22/20 °C temperature (day/night), 16 h photoperiod, and 85 ± 5 μmol m−2 s−1 photosynthetic photon flux density. Illumination was provided by fluorescent (FL, T0) lamps or four LEDs (T1, T2, T3, and T4) emitting varying wide spectra. Watermelon seedlings had greater shoot length, stem diameter, cotyledon area, shoot dry weight-to-length (DW/L) ratio, and Dickson’s quality index (DQI) under T1 and T3, while leaf area and shoot dry weight (DW) had higher values under T1. Interspecific squash seedlings had greater stem diameter, and shoot and root DW under T1 and T3, while leaf and cotyledon areas were favored under T1. In both species, T0 showed inferior development. It could be concluded that a light source with high red emission, relatively low blue emission, and a red:far-red ratio of about 3 units seems ideal for the production of high-quality watermelon (scion) and interspecific squash (rootstock) seedlings.

Sign in / Sign up

Export Citation Format

Share Document