A Compact CPW Fed Wideband Slot Antenna for Wireless Communications

2020 ◽  
pp. 2050184
Author(s):  
Amrita Gorai ◽  
Bappadittya Roy ◽  
G. K. Mahanti
Keyword(s):  
Wireless Communications ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Fractional Bandwidth ◽  
Ieee 802.11A ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Simulation Results

A compact circularly polarized CPW-fed slot antenna is proposed here. The antenna consists of a pentagonal patch within an asymmetrical slot with a single coplanar waveguide feed. The proposed antenna is excited with CPW feed mechanism and investigated experimentally. The structure is fabricated on FR4 epoxy substrate with a permittivity of 4.4. The impedance bandwidth of 10[Formula: see text]GHz (4[Formula: see text]GHz to 14[Formula: see text]GHz) and the axial ratio bandwidth of 1.2[Formula: see text]GHz with the corresponding fractional bandwidth of 113%. The simulation results fulfil the bandwidth requirements of IEEE 802.11a (5.15–5.35[Formula: see text]GHz/5.47–5.725[Formula: see text]GHz) for wireless applications. In terms of bandwidth, compactness and circular polarization comparable results between simulated and measured results clearly show the validity of the proposed structure.

A Compact Broadband Circularly Polarized Slot Antenna for Universal UHF RFID Reader and GPS

2021 ◽  
Vol 36 (5) ◽  
pp. 589-595
Author(s):  
Canjie Chen ◽  
Quanyuan Feng
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Polarization Characteristics ◽  
Ground Plate

A novel compact printed broadband circularly polarized slot antenna is proposed in this paper. The antenna consists of an inverted L-shaped coplanar waveguide feed structure and a square ground plate loaded with three rectangular slots. The antenna achieves good impedance matching and circular polarization characteristics by adjusting the size of the L-shaped band and the rectangular slot. The simulation results show that the antenna has a 10-dB impedance bandwidth of 1360 MHz (690-2050 MHz) and a 3 dB axial ratio (AR) bandwidth of 490 MHz (770-1260 MHz). Additionally, the maximum gain reached 4.02 dBi. The antenna proposed in this paper can be applied to UHF RFID and GPS frequency bands.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna for Universal UHF RFID Handheld Reader

2021 ◽  
Vol 36 (6) ◽  
pp. 747-754
Author(s):  
Rui Ma ◽  
Quanyuan Feng
Keyword(s):  
Low Cost ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Polarization Characteristic ◽  
Dielectric Substrate ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized

This paper presents a new coplanar waveguide (CPW)-fed circularly polarized square slot antenna (CPSSA). The proposed antenna uses an inverted Z-shaped feedline protruded from the signal line of the feeding CPW. Circularly polarized (CP) radiation can be achieved by adequately inserting the arc-shaped grounded strip into the upper right corner of the square slot. The widened vertical tuning stub on the L-shaped grounded strip can improve impedance matching and axial ratio (AR) performance. The measured results indicate that the 10 dB impedance bandwidth is 620 MHz (652-1272 MHz), and the 3 dB axial ratio bandwidth is 320 MHz (840-1160 MHz), which has a broadband characteristic. In the range of the universal UHF RFID band, the measured peak gain is about 4.4 dBi. The proposed CPSSA uses low-cost FR4 material as the dielectric substrate. The overall size of the antenna is 119 × 119 × 0.5 mm3. The proposed antenna has a simple structure, easy processing, good performance, wide operating bandwidth, and dual circular polarization characteristic. It can be applied to the universal UHF RFID handheld reader environment.

CPW-fed Circularly Polarized Slot Antenna with Small Gap and Stick-shaped Shorted Strip for UHF FRID Readers

Frequenz ◽  
2018 ◽  
Vol 72 (5-6) ◽  
pp. 181-188
Author(s):  
Chien-Yuan Pan ◽  
Chum-Chieh Su ◽  
Wei-Lin Yang
Keyword(s):  
Radio Frequency Identification ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Magnetic Current ◽  
Antenna Structure ◽  
Circularly Polarized ◽  
Rectangular Slot

Abstract A new circularly polarized (CP) slot antenna with a small gap and a stick-shaped shorted strip is presented. The proposed antenna has a sufficient bandwidth for ultrahigh frequency (UHF) radio-frequency identification (RFID) reader applications. The antenna structure consists of a rectangular slot with a small gap, a stick-shaped shorted strip and a 50 Ω coplanar waveguide (CPW) feedline with an asymmetrical ground plane. By using the stick -shaped shorted strip to disturb magnetic current distribution on the slot, the CP radiation can be generated. The measured results demonstrate that the proposed antenna can reach a 10 dB return loss impedance bandwidth of 14.1 % (894–1030 MHz) and a 3 dB axial ratio (AR) bandwidth of 6.4 % (910–970 MHz). The whole antenna size is 80 × 80 × 1.6 mm3.

Design of Dual Band Dual Sense Circularly Polarized Wide Slot Antenna with C-shaped Radiator for Wireless Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 343-351 ◽  
Author(s):  
Shilpee Patil ◽  
A. K. Singh ◽  
Binod K. Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Centre Frequency ◽  
Low Profile ◽  
Peak Gain

Abstract A low profile wide slot antenna for dual band and dual sense circular polarization (CP) is proposed here and is simulated by using HFSS simulation software.The proposed antenna having a C shaped patch for dual band operation and a wide square slot etched on the ground with two strips for CP operation. In between radiating patch and ground plane, designed antenna has a layer of easily available dielectric (FR-4) material. Proposed antenna shows an impedance bandwidth of 13.8 % at 2.38 GHz of centre frequency and 9.7 % at 4.43 GHz of centre frequency for lower and upper band respectively. The 3-dB axial ratio (AR) bandwidths for lower and upper band are 18.8 % (at 2.44 GHz of centre frequency) and 13.3 % (at 4.29 GHz of centre frequency), respectively. The peak gain for the lower and upper band is found as 4.1 dBi and 3.3 dBi, respectively. A close agreement has been found between the simulated and the measured results.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene for Wireless Communications

2021 ◽  
Vol 36 (6) ◽  
pp. 788-795
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with a modified circular slot shape to support a high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λ×0.8λo×0.064λo at the resonant frequency 1.8 GHz. It is fabricated on Rogers RO4003 substrate and fed by using a coplanar waveguide (CPW). A graphene layer is added on one side of the substrate to realize frequency reconfigurability and improve the array gain. The proposed array acquires -10 dB impedance bandwidth of the RSAA that extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz, and from 5.2 GHz to 7 GHz. The proposed array achieved a realized peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias with an average gain of 4.5 dBi over the operating band. When the graphene bias is increased to 20 Volt, the antenna bandwidth extends from 1 GHz to 4 GHz and from 5 to 7 GHz with a peak gain of 14 dBi at 3.5 GHz and an average gain of 7.5 dBi. The linearly polarized operation of the proposed array over the operating bands makes it suitable for short-range wireless communications .

A Novel Design on Broadband Circularly Polarized Slot Antenna

2014 ◽  
Vol 513-517 ◽  
pp. 3103-3106
Author(s):  
Li Zhu ◽  
Xiang Jun Gao ◽  
Guo Cheng Wu ◽  
Guang Ming Wang
Keyword(s):  
Conference Proceedings ◽  
Photonic Bandgap ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Novel Design

In this paper, a novel broadband circularly polarized (CP) slot antenna is proposed and fabricated, in which the perturbation configuration with two quarter annular rings fabricated cornerways in the square slot is designed and a simple Photonic-bandgap (PBG) structure is employed. Through simulating and testing, the broad impedance bandwidth of 81.5%(VSWR<2.0) and the 3dB axial ratio (AR) bandwidth of 48.2% are achieved respectively. This slot antenna will be widely utilized in communication field. These instructions give you basic guidelines for preparing papers for conference proceedings.

Slot loaded EBG-based metasurface for performance improvement of circularly polarized antenna for WiMAX applications

2019 ◽  
Vol 12 (3) ◽  
pp. 212-220 ◽  
Author(s):  
Alka Verma ◽  
Anil Kumar Singh ◽  
Neelam Srivastava ◽  
Shilpee Patil ◽  
Binod Kumar Kanaujia
Keyword(s):  
Performance Improvement ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Compact Structure ◽  
Circularly Polarized ◽  
Feed Line ◽  
Rectangular Patch ◽  
Low Profile ◽  
Good Agreement

AbstractIn this paper, an electromagnetic band gap (EBG) metasurface (MS) superstrate-based circularly polarized antenna for the WiMAX (3.5 GHz) band is proposed. The proposed structure comprises a 2 × 2 slot-loaded rectangular patch MS array that can be perceived as a polarization-dependent EBG MS superstrate. Furthermore, to achieve circular polarization, the proposed antenna has an inclined coupling slot onto the ground with a conventional coplanar waveguide feed line. The proposed antenna has a compact structure with a low profile of 0.037λ0 (λ0 stands for the free-space wavelength at 3.48 GHz) and a ground size of 30 × 30 mm2. The measured results show that the −10 dB impedance bandwidth for the proposed antenna is 34.6% and the 3-dB axial ratio (AR) bandwidth is 6.8% with a peak gain of 3.91 dBi in the desired operating band. Good agreement between the simulated and the measured results verifies the performance of the proposed antenna.

A compact, dual wide-band circularly polarized, modified square ring slot antenna for C and Ku band applications

2018 ◽  
Vol 11 (2) ◽  
pp. 182-189 ◽  
Author(s):  
Shilpee Patil ◽  
Anil Kumar Singh ◽  
Binod Kumar Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Simulated Data ◽  
Axial Ratio ◽  
Wide Band ◽  
Radiation Characteristic ◽  
Dual Band ◽  
Slot Antenna ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Circularly Polarized

AbstractThis paper presents a compact microstrip antenna using FR-4 substrate for dual band circularly polarized operation using a modified square ring slot in the ground plane with microstrip line feed. Simulation of the impedance characteristic and radiation characteristic for the proposed antenna is carried out using commercially available HFSS software. The simulated data validate measured results and shows good agreement. Proposed antenna shows an impedance bandwidth (return loss >10 dB) of 50.88% at 5.9 GHz of center frequency and 29.92% at 12.8 GHz of center frequency for lower and upper band, respectively. The 3 dB axial ratio bandwidth for lower and upper band is 26.4 and 3.0%, respectively and measured peak gain for the lower and upper band is found as 3.2 and 3.4 dBic, respectively. The proposed antenna can be suitable for wireless communication in C and Ku bands.

scholarly journals A Novel Dual-Band Circularly Polarized Rectangular Slot Antenna

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Biao Li ◽  
Yang Ding ◽  
Ying-Zeng Yin
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Surface Current ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Surface Current Density ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Metal Frame

A coplanar waveguide fed dual-band circularly polarized rectangular slot antenna is presented. The proposed antenna consists of a rectangular metal frame acting as a ground and an S-shaped monopole as a radiator. The spatial distribution of the surface current density is employed to demonstrate that the circular polarization is generated by the S-shaped monopole which controls the path of the surface currents. An antenna prototype, having overall dimension 37 × 37 × 1 mm3, has been fabricated on FR4 substrate with dielectric constant 4.4. The proposed antenna achieves 10 dB return loss bandwidths and 3 dB axial ratio (AR) in the frequency bands 2.39–2.81 GHz and 5.42–5.92 GHz, respectively. Both these characteristics are suitable for WLAN and WiMAX applications.

Sign in / Sign up

Export Citation Format

Share Document