Design of Dual Band Dual Sense Circularly Polarized Wide Slot Antenna with C-shaped Radiator for Wireless Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 343-351 ◽  
Author(s):  
Shilpee Patil ◽  
A. K. Singh ◽  
Binod K. Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Centre Frequency ◽  
Low Profile ◽  
Peak Gain

Abstract A low profile wide slot antenna for dual band and dual sense circular polarization (CP) is proposed here and is simulated by using HFSS simulation software.The proposed antenna having a C shaped patch for dual band operation and a wide square slot etched on the ground with two strips for CP operation. In between radiating patch and ground plane, designed antenna has a layer of easily available dielectric (FR-4) material. Proposed antenna shows an impedance bandwidth of 13.8 % at 2.38 GHz of centre frequency and 9.7 % at 4.43 GHz of centre frequency for lower and upper band respectively. The 3-dB axial ratio (AR) bandwidths for lower and upper band are 18.8 % (at 2.44 GHz of centre frequency) and 13.3 % (at 4.29 GHz of centre frequency), respectively. The peak gain for the lower and upper band is found as 4.1 dBi and 3.3 dBi, respectively. A close agreement has been found between the simulated and the measured results.

A compact, dual wide-band circularly polarized, modified square ring slot antenna for C and Ku band applications

2018 ◽  
Vol 11 (2) ◽  
pp. 182-189 ◽  
Author(s):  
Shilpee Patil ◽  
Anil Kumar Singh ◽  
Binod Kumar Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Simulated Data ◽  
Axial Ratio ◽  
Wide Band ◽  
Radiation Characteristic ◽  
Dual Band ◽  
Slot Antenna ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Circularly Polarized

AbstractThis paper presents a compact microstrip antenna using FR-4 substrate for dual band circularly polarized operation using a modified square ring slot in the ground plane with microstrip line feed. Simulation of the impedance characteristic and radiation characteristic for the proposed antenna is carried out using commercially available HFSS software. The simulated data validate measured results and shows good agreement. Proposed antenna shows an impedance bandwidth (return loss >10 dB) of 50.88% at 5.9 GHz of center frequency and 29.92% at 12.8 GHz of center frequency for lower and upper band, respectively. The 3 dB axial ratio bandwidth for lower and upper band is 26.4 and 3.0%, respectively and measured peak gain for the lower and upper band is found as 3.2 and 3.4 dBic, respectively. The proposed antenna can be suitable for wireless communication in C and Ku bands.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

scholarly journals Beamwidth-Enhanced Low-Profile Dual-Band Circular Polarized Patch Antenna for CNSS Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hongmei Liu ◽  
Chenhui Xun ◽  
Shaojun Fang ◽  
Zhongbao Wang
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Coupled Line ◽  
Low Profile ◽  
Feed Network ◽  
Single Input ◽  
Half Power

A low-profile dual-band circular polarized (CP) patch antenna with wide half-power beamwidths (HPBWs) is presented for CNSS applications. Simple stacked circular patches are used to achieve dual-band radiation. To enhance the HPBW for the two operation bands, a dual annular parasitic metal strip (D-APMS) combined with reduced ground plane (R-GP) is presented. A single-input feed network based on the coupled line transdirectional (CL-TRD) coupler is also proposed to provide two orthogonal modes at the two frequency bands simultaneously. Experimental results show that the 10 dB impedance bandwidth is 32.7%. The 3 dB axial ratio (AR) bandwidths for the lower and upper bands are 4.1% and 6.5%, respectively. At 1.207 GHz, the antenna has the HPBW of 123° and 103° in the xoz and yoz planes, separately. And the values are 127° and 113° at 1.561 GHz.

Analysis and design of inclined fractal defected ground-based circularly polarized antenna for CA-band applications

2020 ◽  
pp. 1-10
Author(s):  
Sonal Gupta ◽  
Shilpee Patil ◽  
Chhaya Dalela ◽  
Binod Kumar Kanaujia
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Mobile Wimax ◽  
Impedance Bandwidth ◽  
Ieee 802.16E ◽  
Defected Ground Structure ◽  
Circularly Polarized ◽  
Analysis And Design ◽  
Centre Frequency ◽  
Good Agreement

Abstract Design of single-feed circularly polarized (CP) microstrip antenna is proposed in this article. The design employs the concept of E-shape patch with inclined fractal defected ground structure (IFDGS), which can improve the impedance bandwidth, gain, and axial ratio (AR) bandwidth. The excellent enhanced impedance bandwidth, axial ratio bandwidth, and gain are achieved by an inclined E-shaped fractal etched on the ground plane. The parameter studies of the E-shaped IFDGS are given to illustrate the way to obtain CP radiation. The third iterative IFDGS is fabricated on easily available FR4 substrate with a size of 0.494 λ0 × 0.494 λ0 × 0.019 λ0 (λ0 is the wavelength in free space at 3.624 GHz). The measured results verify the simulated results and show good agreement. The proposed antenna shows an impedance bandwidth of 12.7% at a centre frequency of 3.47 GHz and 3-dB AR bandwidth for this band is 2.39% at a centre frequency of 3.626 GHz. The measured peak gain for the proposed antenna is found as 8.1 dBi. The proposed antenna can be suitable for mobile WIMAX operation (IEEE 802.16e-2005 standard), wireless communication in CA-band and FCC.

Compact circularly polarized antenna with wide axial ratio bandwidth using modified quasi-self-complementary structure

2018 ◽  
Vol 11 (1) ◽  
pp. 35-40 ◽  
Author(s):  
Gunjan Srivastava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Peak Gain

A compact circularly polarized antenna with wide axial ratio bandwidth (ARBW) using quasi-self-complementary (QSC) structure is presented. A 3-dB ARBW is achieved by shortening the ground plane of the QSC structure. Furthermore, the wide ARBW is obtained by the introduction of a stepped stub in the extended ground plane of the QSC structure. The antenna is fabricated on a FR4 substrate with the overall dimensions of 25 mm × 22 mm × 0.8 mm. The proposed antenna has an impedance bandwidth of 5.9 GHz (2.4–8.3 GHz, 110%) and 3 dB ARBW of 1.6 GHz (2.4–4 GHz, 50%). A peak gain of 1–3 dBi is observed within the 3 dB ARBW.

A printed wide-beamwidth circularly polarized antenna via two pairs of radiating slots placed in a square contour

2016 ◽  
Vol 9 (3) ◽  
pp. 649-656 ◽  
Author(s):  
Neng-Wu Liu ◽  
Lei Zhu ◽  
Wai-Wa Choi
Keyword(s):  
Ground Plane ◽  
Large Angle ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Slot Antenna ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Low Profile ◽  
Orthogonal Pairs ◽  
Good Agreement

A low-profile circularly polarized (CP) slot antenna to achieve a wide axial-ratio (AR) beamwidth is proposed in this paper. The radiating patch consists of two orthogonal pairs of parallel slots etched symmetrically onto a ground plane. Firstly, our theoretical study demonstrates that the CP radiation can be satisfactorily achieved at the broadside, when the vertical and horizontal paired-slots are excited in the same amplitude with 90° phase difference. Secondly, the principle of CP radiation of the proposed antenna on an infinite ground plane is described. Through analyzing the spacing between two parallel slots, the |Eθ| and |Eφ| radiation patterns can be made approximately identical with each other over a large angle range. As such, the slot antenna achieves a wide AR beamwidth. After that, the 3 dB AR beamwidth with respect to the size of a finite ground plane is investigated to constitute a practical CP antenna on a finite ground plane. In final, the proposed CP antenna with a 1–4 probe-to-microstrip feeding network is designed and fabricated on a finite ground plane of a dielectric substrate. Measured results are shown to be in good agreement with the simulated ones about the gain, reflection coefficient, AR bandwidth, and radiation patterns. Most importantly, a wide 3 dB AR beamwidth of 126° and low-profile property with the height of 0.036λ0 are achieved.

scholarly journals A Low-Profile Circularly Polarized Conical-Beam Antenna with Wide Overlap Bandwidth

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wei He ◽  
Yejun He ◽  
Long Zhang ◽  
Sai-Wai Wong ◽  
Wenting Li ◽  
...  
Keyword(s):  
Electric Field ◽  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Beam Radiation ◽  
Circularly Polarized ◽  
Low Profile ◽  
Two Sides ◽  
Conical Beam

In this paper, a low-profile circularly polarized (CP) conical-beam antenna with a wide overlap bandwidth is presented. Such an antenna is constructed on the two sides of a square substrate. The antenna consists of a wideband monopolar patch antenna fed by a probe in the center and two sets of arc-hook-shaped branches. The monopolar patch antenna is loaded by a set of conductive shorting vias to achieve a wideband vertically polarized electric field. Two sets of arc-hook-shaped parasitic branches connected to the patch and ground plane can generate a horizontally polarized electric field. To further increase the bandwidth of the horizontally polarized electric field, two types of arc-hook-shaped branches with different sizes are used, which can generate another resonant frequency. When the parameters of the arc-hook-shaped branches are reasonably adjusted, a 90° phase difference can be generated between the vertically polarized electric field and the horizontally polarized electric field, so that the antenna can produce a wideband CP radiation pattern with a conical beam. The proposed antenna has a wide impedance bandwidth ( ∣ S 11 ∣ < − 10   dB ) of 35.6% (4.97-7.14 GHz) and a 3 dB axial ratio (AR) bandwidth at phi = 0 ° and theta = 35 ° of about 30.1% (4.97-6.73 GHz). Compared with the earlier reported conical-beam CP antennas, an important feature of the proposed antenna is that the AR bandwidth is completely included in the impedance bandwidth, that is, the overlap bandwidth of ∣ S 11 ∣ < − 10   dB and AR < 3   dB is 30.1%. Moreover, the stable omnidirectional conical-beam radiation patterns can be maintained within the whole operational bandwidth.

A Compact CPW Fed Wideband Slot Antenna for Wireless Communications

2020 ◽  
pp. 2050184
Author(s):  
Amrita Gorai ◽  
Bappadittya Roy ◽  
G. K. Mahanti
Keyword(s):  
Wireless Communications ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Fractional Bandwidth ◽  
Ieee 802.11A ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Simulation Results

A compact circularly polarized CPW-fed slot antenna is proposed here. The antenna consists of a pentagonal patch within an asymmetrical slot with a single coplanar waveguide feed. The proposed antenna is excited with CPW feed mechanism and investigated experimentally. The structure is fabricated on FR4 epoxy substrate with a permittivity of 4.4. The impedance bandwidth of 10[Formula: see text]GHz (4[Formula: see text]GHz to 14[Formula: see text]GHz) and the axial ratio bandwidth of 1.2[Formula: see text]GHz with the corresponding fractional bandwidth of 113%. The simulation results fulfil the bandwidth requirements of IEEE 802.11a (5.15–5.35[Formula: see text]GHz/5.47–5.725[Formula: see text]GHz) for wireless applications. In terms of bandwidth, compactness and circular polarization comparable results between simulated and measured results clearly show the validity of the proposed structure.

Wideband Inverted-L Microstrip-via-Fed Circularly Polarized Antenna with Asymmetrical Ground for WLAN/Wimax Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 333-341 ◽  
Author(s):  
Qiang Chen ◽  
Hou Zhang ◽  
Lu-chun Yang ◽  
Bin-bin Li ◽  
Xue-liang Min
Keyword(s):  
Circular Polarization ◽  
Parametric Study ◽  
Ground Plane ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Large Bandwidth ◽  
Circularly Polarized Radiation ◽  
Polarized Radiation

Abstract A design with wideband and circularly polarized radiation antenna from an open-slot antenna has been demonstrated in this paper. The proposed antenna, which consists of an open slot and an inverted-L strip feeding, provides a large bandwidth, which completely cover the Wimax (3.3–3.8 GHz) and WLAN (2.4–2.48 GHz) bands. The open slot is formed by an modified ground plane with a slit cut and monofilar spiral stubs employed, which fed by an asymmetrical inverted-L strip feedline using a via. As demonstrated, the CP operation was significantly improved by loading monofilar spiral stubs connected to the asymmetric feedline by means of a via. A parametric study of the key parameters is made and the mechanism for circular polarization is described. After optimization, the impedance bandwidth is approximately 3.78 GHz (2.12 to 5.9 GHz) and the 3 dB axial ratio bandwidth is approximately 2.75 GHz (2.2 to 4.95 GHz), which represent fractional bandwidths of approximately 94.3 % and 76.9 %, respectively.

scholarly journals Circularly Polarized Broadband Printed Antenna for Wireless Applications

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4261 ◽  
Author(s):  
Md. Samsuzzaman ◽  
Mohammad Islam
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Ground Plane ◽  
Axial Ratio ◽  
Wireless Communication Systems ◽  
Impedance Bandwidth ◽  
Printed Antenna ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Design Structure

A simple, compact sickle-shaped printed antenna with a slotted ground plane is designed and developed for broadband circularly polarized (CP) radiation. The sickle-shaped radiator with a tapered feed line and circular slotted square ground plane are utilized to realize the wideband CP radiation feature. With optimized dimensions of 0.29λ × 0.29λ × 0.012λ at 2.22 GHz frequency for the realized antenna parameters, the measured results display that the antenna has a 10 dB impedance bandwidth of 7.70 GHz (126.85%; 2.22–9.92 GHz) and a 3 dB axial ratio (AR) bandwidth of 2.64 GHz (73.33%; 2.28–4.92 GHz). The measurement agrees well with simulation, which proves an excellent circularly polarized property. For verification, the mechanism of band improvement and circular polarization are presented, and the parametric study is carried out. Since, the proposed antenna is a simple design structure with broad impedance and AR bandwidth, which is a desirable feature as a candidate for various wireless communication systems. Because of the easy printed structure and scaling the dimension with broadband CP characteristics, the realized antenna does incorporate in a number of CP wireless communication applications.

Sign in / Sign up

Export Citation Format

Share Document