Slot loaded EBG-based metasurface for performance improvement of circularly polarized antenna for WiMAX applications

2019 ◽  
Vol 12 (3) ◽  
pp. 212-220 ◽  
Author(s):  
Alka Verma ◽  
Anil Kumar Singh ◽  
Neelam Srivastava ◽  
Shilpee Patil ◽  
Binod Kumar Kanaujia
Keyword(s):  
Performance Improvement ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Compact Structure ◽  
Circularly Polarized ◽  
Feed Line ◽  
Rectangular Patch ◽  
Low Profile ◽  
Good Agreement

AbstractIn this paper, an electromagnetic band gap (EBG) metasurface (MS) superstrate-based circularly polarized antenna for the WiMAX (3.5 GHz) band is proposed. The proposed structure comprises a 2 × 2 slot-loaded rectangular patch MS array that can be perceived as a polarization-dependent EBG MS superstrate. Furthermore, to achieve circular polarization, the proposed antenna has an inclined coupling slot onto the ground with a conventional coplanar waveguide feed line. The proposed antenna has a compact structure with a low profile of 0.037λ0 (λ0 stands for the free-space wavelength at 3.48 GHz) and a ground size of 30 × 30 mm2. The measured results show that the −10 dB impedance bandwidth for the proposed antenna is 34.6% and the 3-dB axial ratio (AR) bandwidth is 6.8% with a peak gain of 3.91 dBi in the desired operating band. Good agreement between the simulated and the measured results verifies the performance of the proposed antenna.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

Development and Miniaturized of Circularly Polarization Diversity at Cavity Backed SIW Antenna for X-Band Application

Frequenz ◽  
2019 ◽  
Vol 73 (9-10) ◽  
pp. 317-320
Author(s):  
Saeid Karamzadeh ◽  
Vahid Rafiei ◽  
Hasan Saygin
Keyword(s):  
Schottky Diodes ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Polarization Diversity ◽  
Circularly Polarized ◽  
Left Hand ◽  
Low Profile ◽  
X Band ◽  
Coaxial Feed ◽  
Good Agreement

Abstract In this work circularly polarization diversity has been achieved by utilizing two Schottky diodes on low profile cavity-backed substrate integrated waveguide (CBSIW). In comparison with other studies in the literature, the size of antenna has been reduced to 0.54λg × 0.76λg by helping a 50-Ohm coaxial feed line. The impedance bandwidth, axial ratio bandwidth and antenna gain are improved to 10.02 %, 5.2 % and 7.68dBi, respectively. In addition, the proposed antenna can generate either a left-hand circularly polarized (LHCP) or a right-hand circularly polarized (RHCP) radiation. The developed antenna was fabricated and tested and the achieved results were in good agreement with the simulated one.

scholarly journals Coplanar Waveguide-Fed Bidirectional Same-Sense Circularly Polarized Metasurface-Based Antenna

2021 ◽  
Vol 21 (3) ◽  
pp. 210-217
Author(s):  
Cho Hilary Scott Nkimbeng ◽  
Heesu Wang ◽  
Ikmo Park
Keyword(s):  
Reflection Coefficient ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Radiation Efficiency ◽  
Impedance Bandwidth ◽  
Antenna Gain ◽  
Circularly Polarized ◽  
Feed Line

This paper presents the design of a bidirectional same-sense circularly polarized (CP) antenna that uses metasurfaces. The antenna consists of two metasurfaces, each comprising an array of 2 × 4 corner truncated patches placed back-to-back on the top and bottom of the antenna. In addition, a ground plane with an etched slot is sandwiched between the substrates at the front and back, and the feed line is a 50 Ω coplanar waveguide. The antenna radiates same-sense right-handed CP waves in both the front and back directions and has overall dimensions of 48 mm × 24 mm × 3.048 mm (0.91λo × 0.45λo × 0.05λo at 5.7 GHz). The measured reflection coefficient for |S11| < -10 dB yields an impedance bandwidth of 5.21–6.26 GHz (18.4%) and an axial ratio (AR) bandwidth of 5.36–6 GHz (11.2%) for both front and back directions. The antenna gain is 3–5.29 dBic for both directions and has a radiation efficiency of >96% within its AR bandwidth.

Characteristic mode-based compact circularly polarized metasurface antenna for in-band RCS reduction

2019 ◽  
Vol 12 (2) ◽  
pp. 131-137
Author(s):  
Puneeth Kumar Rajanna ◽  
Karthik Rudramuni ◽  
Krishnamoorthy Kandasamy
Keyword(s):  
Satellite Communication ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Mode Analysis ◽  
Impedance Bandwidth ◽  
Compact Structure ◽  
Characteristic Mode ◽  
Circularly Polarized ◽  
Rectangular Patch ◽  
Full Wave Analysis

AbstractThis paper presents a novel design of a low profile circularly polarized (CP) metasurface (MTS) antenna with in-band radar cross-section (RCS) reduction property. The MTS is loaded as a superstrate on slot antenna and it can be viewed as a polarization-dependent MTS (PDMTS). The rectangular patch-based PDMTS is analyzed using characteristic mode analysis to find two orthogonal degenerate modes, which produces CP waves. Linearly polarized slot antenna is used to excite the PDMTS. The performance of PDMTS loaded slot antenna is analyzed numerically using full-wave analysis method. The PDMTS CP antenna is fabricated and its performance is tested experimentally. The proposed antenna has a compact structure and it has an overall size of $0.52{\lambda _0}\times 0.52{\lambda _0} \times 0.078{\lambda _0}$ (where ${\lambda _0}$ is the free space wavelength). The measured results show that the PDMTS antenna achieves $-10\,{\rm dB}$ impedance bandwidth of 29.41$\%$, 3-dB axial ratio bandwidth of 9.05$\%$, broadside gain of 6.34 dB, and monostatic RCS reduction of $-30.2\,{\rm dBsm}$ at the resonant frequency of 5.86 GHz. The simulated results are in well agreement with the measured results and it is well suited for C-band Radar and Satellite communication.

Wideband low-profile aperture-coupled circularly polarized antenna based on metasurface

2018 ◽  
Vol 10 (7) ◽  
pp. 851-859 ◽  
Author(s):  
Qi Zheng ◽  
Chenjiang Guo ◽  
Jun Ding
Keyword(s):  
Coplanar Waveguide ◽  
Axial Ratio ◽  
High Gain ◽  
Mode Analysis ◽  
Impedance Bandwidth ◽  
Equivalent Circuit Analysis ◽  
Circularly Polarized ◽  
Low Profile ◽  
Compact Size ◽  
Feeding Structure

AbstractIn this paper, a metasurface-based aperture-coupled circularly polarized (CP) antenna with wideband and high radiation gain is proposed and analyzed. The proposed antenna is comprised of coplanar waveguide coupling with 4 × 4 corner truncated square patches, which show compact size and low profile. The mechanism of the CP antenna is analyzed theoretically based on the mode analysis and equivalent circuit analysis. The parameters of feeding structure and truncated corner are studied and optimized to achieve wide impedance bandwidth (BW) and axial ratio (AR) BW. Finally, an overall size of 38.8 mm × 38.8 mm × 3.5 mm (0.71λ0 × 0.71λ0 × 0.064λ0 at 5.5 GHz) CP antenna is proposed and fabricated. The simulated results demonstrate that over 41.7% impedance BW (S11 < −10 dB) of 4.55–6.95 GHz and 3 dB AR BW of 5.05–6.15 GHz (fractional BW is about 19.6%) are achieved. In addition, the antenna yielded a broadside CP radiation with a high gain average about 7.5 dBic. Experimental results are in good agreement with the simulated ones.

Broadband CPW-fed circularly polarized antenna for IoT-based navigation system

2019 ◽  
Vol 11 (08) ◽  
pp. 835-843 ◽  
Author(s):  
Amit Birwal ◽  
Sanjeev Singh ◽  
Binod Kumar Kanaujia ◽  
Sachin Kumar
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Ground Surface ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Navigation Systems ◽  
Left Edge ◽  
Circularly Polarized ◽  
Rectangular Patch ◽  
Communication Devices

AbstractThe paper presents a new coplanar waveguide (CPW)-fed rectangular patch antenna with a square-shaped ground plane that can be employed in modern advanced navigation systems. For realizing broad impedance bandwidth in the proposed antenna, a wide slot is introduced in the square ground plane and the rectangular patch is shifted toward the left edge of the ground surface. In addition, by means of introducing square-shaped stubs near the left and right edge of the ground plane, the circular polarization is achieved at L1, L2, and L5 satellite bands. As per the simulation results, the proposed antenna provides a wide impedance bandwidth (S11&lt;−10 dB) of 123% (1.12–4.72 GHz) and 3 dB axial ratio bandwidth of 11% (1.15–1.29 GHz) and 18% (1.5–1.8 GHz) suitable for multipurpose wireless applications. The designed single feed circularly polarized antenna is low profile, small size, light weight and easily integrable with other high-frequency communication devices. To validate radiation performance of the proposed structure, the antenna is fabricated and integrated with the commercially available Global Positioning System (GPS) receiver and it is found that the measured values are in close agreement with the desired results.

scholarly journals Compact Broadband Circularly Polarized CPW-Fed Antenna with Characteristic Mode Analysis

2022 ◽  
Vol 2022 ◽  
pp. 1-11
Author(s):  
Wei Xu ◽  
Jingchang Nan ◽  
Mingming Gao
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Mode Analysis ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Characteristic Mode ◽  
Circularly Polarized ◽  
Low Profile ◽  
Compact Size

A compact circularly polarized (CP) antenna is proposed for low-profile and wideband operation based on characteristic mode analysis (CMA). A ring patch with a gap and two arc-shaped metallic stubs as the radiator is analyzed and optimized by CMA to figure out the orthogonal modes and operating frequency band for potential good axial ratio (AR) performance. The studies of these CP modes provide a physical insight into the property of broadband circular polarization. Such an in-depth understanding paves the way for the proposal of novel CP antenna with separation between the design of radiator and feeding network. A 50-Ω coplanar waveguide (CPW) is introduced and placed appropriately to excite the desired modes based on the information from CMA, which employs two asymmetric ground planes to improve the performance in terms of AR and impedance matching. The antenna with a compact size of 0.71λ0 × 0.76λ0 × 0.038λ0 (λ0 is the free-space wavelength at the center frequency of the 3-dB AR bandwidth) is fabricated and measured for validation. The realized gain varies from 1.6 to 3.1 dBic over the operating bandwidth characterized by the measured 10-dB impedance bandwidth of 83.8% (3.98–9.72 GHz) and 3-dB AR bandwidth of 70.3% (4.59–9.57 GHz), respectively.

A low-profile triple-band circularly polarized wide slot antenna for wireless systems

2018 ◽  
Vol 11 (1) ◽  
pp. 67-75 ◽  
Author(s):  
Shilpee Patil ◽  
A. K. Singh ◽  
Binod K. Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Wireless Systems ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Slot Antennas ◽  
Circularly Polarized ◽  
Rectangular Patch ◽  
Low Profile ◽  
Good Agreement ◽  
Triple Band

AbstractA simple design for triple-band circularly polarized (CP) wide slot antennas is proposed and experimentally investigated. The proposed antenna having a microstrip-fed rectangular patch with T-shaped notch for triple-band operation and a modified wide square slot on ground plane for CP operation. The measured 10 dB reflection bandwidths are 1.24% (≈340 MHz from 2.56 to 2.9 GHz), 9.63% (≈430 MHz from 4.25 to 4.68 GHz), and 5.34% (≈490 MHz from 8.93 to 9.42 GHz). The generated 3 dB axial ratio bandwidths of the proposed antenna are 7.54, 8.98, and 1.65% at operating frequencies around 2.65, 4.45, and 9.09 GHz, respectively. The measured peak gains within the 3 dB axial ratio bands are 3.03, 3.5, and 5.64 dBi. The simulated and measured results for the return loss, axial ratio, and antenna gain show a good agreement, which validate the antenna design.

Bilayer split-ring chiral metamaterial based reconfigurable antenna for polarization conversion

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Preet Kaur ◽  
Pravin R. Prajapati
Keyword(s):  
Low Cost ◽  
Axial Ratio ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Circularly Polarized ◽  
Left Hand ◽  
Rectangular Patch ◽  
Mode 2 ◽  
Chiral Metamaterial

Abstract A bilayer split-ring chiral metamaterial converts the linearly polarized wave, into a nearly perfect left or right-handed circularly polarized wave. The proposed antenna is intended to operate at center frequency of 5.80 GHz with switchable polarization capability. The polarization re-configurability is achieved by electronically switching of two PIN-diode pairs, which are embedded into bilayer split-ring Chiral Metamaterial. The optimized length of rectangular patch is 16 mm and width is 12.1 mm. Two types of radiation characteristics offered by the proposed antenna; left hand circularly polarized in mode 1 and right hand circularly polarized in mode 2. Measured results show that its impedance bandwidth is 155 MHz from 5.70 to 5.855 GHz for both mode 1 and mode 2. The measured axial-ratio bandwidth is 100 MHz from 5.75 to 5.85 GHz for mode 1 and 110 MHz from 5.73 to 5.84 GHz for mode 2. Antenna has LHCP gain of 2.52 dBi and RHCP gain of −23 dBi in mode 1. RHCP gain of 2 dBi and polarization purity of about −20 dBi is obtained in mode 2. The proposed antenna has simple structure, low cost and it has potential application in field of wireless communication (i.e., WiMax, WLAN etc.).

A novel design of circularly polarized ring CDRA with wideband impedance bandwidth using slotted microstrip feed line for X-band applications

2021 ◽  
pp. 1-10
Author(s):  
Chandravilash Rai ◽  
Sanjai Singh ◽  
Ashutosh Kumar Singh ◽  
Ramesh Kumar Verma
Keyword(s):  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Circularly Polarized ◽  
Feed Line ◽  
X Band ◽  
Novel Design ◽  
Two Hybrid ◽  
Microstrip Feed Line ◽  
Microstrip Feed

Abstract A circularly polarized ring cylindrical dielectric resonator antenna (ring-CDRA) of wideband impedance bandwidth is presented in this article. The proposed ring CDRA consist of an inverted rectangular (tilted rectangular) shaped aperture and inverted L-shaped slotted microstrip feed line. The tilted rectangular shaped aperture and inverted L-shaped microstrip feed line generate two-hybrid mode HEM11δ and HEM12δ while ring CDRA and slotted microstrip feed line are used for the enhancement of impedance bandwidth. The proposed ring CDRA is resonating between 6.08 and 12.2 GHz with 66.95% (6120 MHz) impedance bandwidth. The axial ratio (AR) bandwidth of 6.99% (780 MHz) is obtained between 10.76 and 11.54 GHz with a minimum AR value of 0.2 dB at a frequency of 11 GHz. The proposed geometry of ring CDRA has been validated with measurement performed by VNA and anechoic chamber. The operating range of the proposed radiator is useful for different applications in X-band.

Sign in / Sign up

Export Citation Format

Share Document