PREPARATION AND CHARACTERIZATION OF CHITOSAN–GOLD NANOCOMPOSITES FOR DRUG DELIVERY APPLICATION

2010 ◽  
Vol 17 (02) ◽  
pp. 165-172 ◽  
Author(s):  
SEUNG-CHUL LEE ◽  
SANG-WHA LEE ◽  
IK-JOONG KANG
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Chitosan Nanoparticles ◽  
Gold Clusters ◽  
Gold Colloids ◽  
Transmission Electron ◽  
Gold Salts ◽  
Ca 50 ◽  
Gold Nanocomposites

Chitosan–gold nanocomposites were fabricated via a seed-mediated goldshell growth over chitosan–gold nanocomplex and examined as a potential biomedical agent for drug delivery. Chitosan–gold nanocomplex was formed by the electrostatic interaction between of cationic chitosan nanoparticles (ca. 50 nm) and anionic gold colloids (ca. 1–3 nm) and the subsequent reduction of gold salts was conducted to form the gold clusters over the chitosan nanoparticles in the presence of reducing ascorbic acid. The resultant nanocomposites (or nanoshells) exhibited the absorption peak around 580 nm that was clearly red-shifted by ca. 60 nm as compared to gold nanoparticles. Surface morphology and plasmonic properties of chitosan–gold nanocomposites were characterized by transmission electron microscopy, field emission scanning electron microscopy (including EDX), ultraviolet–visible spectroscopy, and zeta-potential meter.

Transmission Electron Microscopy of Lipid Vesicles for Drug Delivery: Comparison between Positive and Negative Staining

2010 ◽  
Vol 16 (4) ◽  
pp. 456-461 ◽  
Author(s):  
Valentina Bello ◽  
Giovanni Mattei ◽  
Paolo Mazzoldi ◽  
Nicoletta Vivenza ◽  
Paolo Gasco ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Transmission Electron Microscopy ◽  
Iron Oxide ◽  
Osmium Tetroxide ◽  
Lipid Vesicles ◽  
Negative Staining ◽  
Transmission Electron ◽  
Compositional Characterization

AbstractLipid-containing nanostructures, in the form of solid lipid nanoparticles or iron oxide nanoparticles (NPs) coated with a lipid shell, were used as case studies for assessing and optimizing staining for transmission electron microscopy structural and compositional characterization. These systems are of paramount importance as drug delivery systems or as bio-compatible contrast agents. In particular, we have treated the systems with a negative (phospshotungstic acid) or with a positive (osmium tetroxide) staining agent. For iron-oxide NPs coated with the lipid shell, negative staining was more efficient with respect to the positive one. Nevertheless, in particular cases the combination of the two staining procedures provided more complete morphological and compositional characterization of the particles.

Cryomicroscopy of multiphase latices

1991 ◽  
Vol 49 ◽  
pp. 1060-1061
Author(s):  
O. L. Shaffer ◽  
M.S. El-Aasser ◽  
C. L. Zhao ◽  
M. A. Winnik ◽  
R. R. Shivers
Keyword(s):  
Electron Microscopy ◽  
Radiation Damage ◽  
Freeze Fracture ◽  
Particle Morphology ◽  
Second Stage ◽  
Transmission Electron ◽  
Important Approach ◽  
Carbon Coated ◽  
Preparation Techniques

Transmission electron microscopy is an important approach to the characterization of the morphology of multiphase latices. Various sample preparation techniques have been applied to multiphase latices such as OsO4, RuO4 and CsOH stains to distinguish the polymer phases or domains. Radiation damage by an electron beam of latices imbedded in ice has also been used as a technique to study particle morphology. Further studies have been developed in the use of freeze-fracture and the effect of differential radiation damage at liquid nitrogen temperatures of the latex particles embedded in ice and not embedded.Two different series of two-stage latices were prepared with (1) a poly(methyl methacrylate) (PMMA) seed and poly(styrene) (PS) second stage; (2) a PS seed and PMMA second stage. Both series have varying amounts of second-stage monomer which was added to the seed latex semicontinuously. A drop of diluted latex was placed on a 200-mesh Formvar-carbon coated copper grid.

Applications of Transmission Electron Microscopy in the Characterization of Metal Machinability

1968 ◽  
Vol 26 ◽  
pp. 442-443 ◽  
Author(s):  
L.E. Murr ◽  
A.B. Draper
Keyword(s):  
Electron Microscopy ◽  
State Physics ◽  
Test Material ◽  
Milling Machine ◽  
Rotary Table ◽  
Solid State Physics ◽  
Materials Properties ◽  
Transmission Electron ◽  
Selection Of

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.

Interface structures in polycrystalline ceramic materials

1986 ◽  
Vol 44 ◽  
pp. 468-471
Author(s):  
K. J. Morrissey
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Physical And Mechanical Properties ◽  
High Resolution Electron Microscopy ◽  
Ceramic Materials ◽  
Polycrystalline Materials ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Interface Structures

Grain boundaries and interfaces play an important role in determining both physical and mechanical properties of polycrystalline materials. To understand how the structure of interfaces can be controlled to optimize properties, it is necessary to understand and be able to predict their crystal chemistry. Transmission electron microscopy (TEM), analytical electron microscopy (AEM,), and high resolution electron microscopy (HREM) are essential tools for the characterization of the different types of interfaces which exist in ceramic systems. The purpose of this paper is to illustrate some specific areas in which understanding interface structure is important. Interfaces in sintered bodies, materials produced through phase transformation and electronic packaging are discussed.

Characterization of submicrometer fluid Inclusions in minerals by Analytical/Transmission Electron Microscopy and electron diffraction

1990 ◽  
Vol 48 (4) ◽  
pp. 424-424
Author(s):  
George Guthrie ◽  
David Veblen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Microscope ◽  
Electron Diffraction ◽  
Light Microscopy ◽  
Fluid Inclusions ◽  
Energy Dispersive Spectrometer ◽  
Analytical Transmission Electron Microscopy ◽  
Transmission Electron

The nature of a geologic fluid can often be inferred from fluid-filled cavities (generally <100 μm in size) that are trapped during the growth of a mineral. A variety of techniques enables the fluids and daughter crystals (any solid precipitated from the trapped fluid) to be identified from cavities greater than a few micrometers. Many minerals, however, contain fluid inclusions smaller than a micrometer. Though inclusions this small are difficult or impossible to study by conventional techniques, they are ideally suited for study by analytical/ transmission electron microscopy (A/TEM) and electron diffraction. We have used this technique to study fluid inclusions and daughter crystals in diamond and feldspar.Inclusion-rich samples of diamond and feldspar were ion-thinned to electron transparency and examined with a Philips 420T electron microscope (120 keV) equipped with an EDAX beryllium-windowed energy dispersive spectrometer. Thin edges of the sample were perforated in areas that appeared in light microscopy to be populated densely with inclusions. In a few cases, the perforations were bound polygonal sides to which crystals (structurally and compositionally different from the host mineral) were attached (Figure 1).

Microstructural characterization of a cast RENi5-based alloy

1993 ◽  
Vol 51 ◽  
pp. 1176-1177
Author(s):  
G. M. Micha ◽  
L. Zhang
Keyword(s):  
Electron Microscopy ◽  
Rare Earth ◽  
Microstructural Characterization ◽  
Binary Compound ◽  
Nickel Metal ◽  
Cast Material ◽  
Nickel Metal Hydride ◽  
Transmission Electron ◽  
Cast Condition

RENi5 (RE: rare earth) based alloys have been extensively evaluated for use as an electrode material for nickel-metal hydride batteries. A variety of alloys have been developed from the prototype intermetallic compound LaNi5. The use of mischmetal as a source of rare earth combined with transition metal and Al substitutions for Ni has caused the evolution of the alloy from a binary compound to one containing eight or more elements. This study evaluated the microstructural features of a complex commercial RENi5 based alloy using scanning and transmission electron microscopy.The alloy was evaluated in the as-cast condition. Its chemistry in at. pct. determined by bulk techniques was 12.1 La, 3.2 Ce, 1.5 Pr, 4.9 Nd, 50.2 Ni, 10.4 Co, 5.3 Mn and 2.0 Al. The as-cast material was of low strength, very brittle and contained a multitude of internal cracks. TEM foils could only be prepared by first embedding pieces of the alloy in epoxy.

Intergrowth of niobium tungsten oxides of the tetragonal tungsten bronze type

2020 ◽  
Vol 75 (11) ◽  
pp. 913-919
Author(s):  
Frank Krumeich
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tungsten Bronze ◽  
Structural Complexity ◽  
Dark Field ◽  
Tetragonal Tungsten Bronze ◽  
Tungsten Oxides ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractSince the 1970s, high-resolution transmission electron microscopy (HRTEM) is well established as the most appropriate method to explore the structural complexity of niobium tungsten oxides. Today, scanning transmission electron microscopy (STEM) represents an important alternative for performing the structural characterization of such oxides. STEM images recorded with a high-angle annular dark field (HAADF) detector provide not only information about the cation positions but also about the distribution of niobium and tungsten as the intensity is directly correlated to the local scattering potential. The applicability of this method is demonstrated here for the characterization of the real structure of Nb7W10O47.5. This sample contains well-ordered domains of Nb8W9O47 and Nb4W7O31 besides little ordered areas according to HRTEM results. Structural models for Nb4W7O31 and twinning occurring in this phase have been derived from the interpretation of HAADF-STEM images. A remarkable grain boundary between well-ordered domains of Nb4W7O31 and Nb8W9O47 has been found that contains one-dimensionally periodic features. Furthermore, short-range order observed in less ordered areas could be attributed to an intimate intergrowth of small sections of different tetragonal tungsten bronze (TTB) based structures.

Sign in / Sign up

Export Citation Format

Share Document